Misplaced Pages

ASTM A354 is an ASTM International standard that defines chemical and mechanical properties for alloy steel bolts, screws, studs, and other externally threaded fasteners. It is officially titled: Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners.

This is a standard set by the standards organization ASTM International, a voluntary standards development organizations that sets technical standards for materials, products, systems, and services.

Mechanical properties

This standard defines the properties for fasteners up to 4 inches in diameter. They are not to be used in applications where they are tensioned to more than 50% of their tensile strength. In those applications structural heavy hex bolts are to be used, as defined by ASTM A490, even though they have the same strength.

Head markings and mechanical properties

Head marking	Grade	Nominal size range	Proof strength	Yield strength (min)	Tensile strength (min)	Core hardness
	Grade BC	1⁄4–2-1⁄2 (inc.)	105	109	125	C26–36
		2-1⁄2–4	95	99	115	C22–33
	Grade BD	1⁄4–2-1⁄2 (inc.)	120	130	150	C33–39
		2-1⁄2–4	105	115	140	C31–39

Recommended nuts

The standard also specifies what nuts are recommended for use with the defined fasteners. Note that nuts of a greater strength can also be used.

References

1. ^ ASTM A354 - 07a, retrieved 2009-06-20.
2. "ASTM A354". Portland Bolt. Retrieved 2009-06-20..
3. FastenalTechnicalReferenceGuide (PDF), retrieved 2010-05-03.

• ASTM standards
• Screws