Misplaced Pages

Compounds of arsenic resemble in some respects those of phosphorus which occupies the same group (column) of the periodic table. The most common oxidation states for arsenic are: −3 in the arsenides, which are alloy-like intermetallic compounds, +3 in the arsenites, and +5 in the arsenates and most organoarsenic compounds. Arsenic also bonds readily to itself as seen in the square As
₄ ions in the mineral skutterudite. In the +3 oxidation state, arsenic is typically pyramidal owing to the influence of the lone pair of electrons.

Inorganic compounds

One of the simplest arsenic compound is the trihydride, the highly toxic, flammable, pyrophoric arsine (AsH₃). This compound is generally regarded as stable, since at room temperature it decomposes only slowly. At temperatures of 250–300 °C decomposition to arsenic and hydrogen is rapid. Several factors, such as humidity, presence of light and certain catalysts (namely aluminium) facilitate the rate of decomposition. It oxidises readily in air to form arsenic trioxide and water, and analogous reactions take place with sulfur and selenium instead of oxygen.

Arsenic forms colorless, odorless, crystalline oxides As₂O₃ ("white arsenic") and As₂O₅ which are hygroscopic and readily soluble in water to form acidic solutions. Arsenic(V) acid is a weak acid and the salts are called arsenates, the most common arsenic contamination of groundwater, and a problem that affects many people. Synthetic arsenates include Scheele's Green (cupric hydrogen arsenate, acidic copper arsenate), calcium arsenate, and lead hydrogen arsenate. These three have been used as agricultural insecticides and poisons.

The protonation steps between the arsenate and arsenic acid are similar to those between phosphate and phosphoric acid. Unlike phosphorous acid, arsenous acid is genuinely tribasic, with the formula As(OH)₃.

A broad variety of sulfur compounds of arsenic are known. Orpiment (As₂S₃) and realgar (As₄S₄) are somewhat abundant and were formerly used as painting pigments. In As₄S₁₀, arsenic has a formal oxidation state of +2 in As₄S₄ which features As-As bonds so that the total covalency of As is still 3. Both orpiment and realgar, as well as As₄S₃, have selenium analogs; the analogous As₂Te₃ is known as the mineral kalgoorlieite, and the anion As₂Te is known as a ligand in cobalt complexes.

All trihalides of arsenic(III) are well known except the astatide, which is unknown. Arsenic pentafluoride (AsF₅) is the only important pentahalide, reflecting the lower stability of the +5 oxidation state; even so, it is a very strong fluorinating and oxidizing agent. (The pentachloride is stable only below −50 °C, at which temperature it decomposes to the trichloride, releasing chlorine gas.)

Alloys

Arsenic is used as the group 15 element in the III-V semiconductors gallium arsenide, indium arsenide, and aluminium arsenide. The valence electron count of GaAs is the same as a pair of Si atoms, but the band structure is completely different which results in distinct bulk properties. Other arsenic alloys include the II-V semiconductor cadmium arsenide.

Organoarsenic compounds

A large variety of organoarsenic compounds are known. Several were developed as chemical warfare agents during World War I, including vesicants such as lewisite and vomiting agents such as adamsite. Cacodylic acid, which is of historic and practical interest, arises from the methylation of arsenic trioxide, a reaction that has no analogy in phosphorus chemistry. Cacodyl was the first organometallic compound known (even though arsenic is not a true metal) and was named from the Greek κακωδία "stink" for its offensive odor; it is very poisonous.

See also

• Category:Arsenic compounds
• Phosphorus compounds
• Antimony compounds
• Germanium compounds
• Selenium compounds

References

1. Uher, Ctirad (2001). "Chapter 5 Skutterudites: Prospective novel thermoelectrics". Recent Trends in Thermoelectric Materials Research I: Skutterudites: Prospective novel thermoelectrics. Semiconductors and Semimetals. Vol. 69. pp. 139–253. doi:10.1016/S0080-8784(01)80151-4. ISBN 978-0-12-752178-7.
2. Norman, Nicholas C. (1998). Chemistry of Arsenic, Antimony and Bismuth. Springer. p. 50. ISBN 978-0-7514-0389-3.
3. ^ Greenwood and Earnshaw, pp. 557–558
4. "Fiche toxicologique No. 53: Trihydrure d'arsenic" (PDF). Institut National de Recherche et de Sécurité (in French). 2000. Archived from the original (PDF) on 26 November 2006. Retrieved 2006-09-06.
5. ^ Greenwood and Earnshaw, pp. 572–578
6. "Arsenic: arsenic(II) sulfide compound data". WebElements.com. Archived from the original on 11 December 2007. Retrieved 2007-12-10.
7. "Kalgoorlieite". Mindat. Hudson Institute of Mineralogy. 1993–2017. Retrieved 2 September 2017.
8. Greenwood and Earnshaw, pp. 578–583
9. Holleman, Arnold F.; Wiberg, Egon; Wiberg, Nils (1985). "Arsen". Lehrbuch der Anorganischen Chemie (in German) (91–100 ed.). Walter de Gruyter. pp. 675–681. ISBN 978-3-11-007511-3.
10. Tanaka, A. (2004). "Toxicity of indium arsenide, gallium arsenide, and aluminium gallium arsenide". Toxicology and Applied Pharmacology. 198 (3): 405–411. doi:10.1016/j.taap.2003.10.019. PMID 15276420.
11. Ossicini, Stefano; Pavesi, Lorenzo; Priolo, Francesco (2003). Light Emitting Silicon for Microphotonics. Springer. ISBN 978-3-540-40233-6. Retrieved 2013-09-27.
12. Din, M. B.; Gould, R. D. (1998). "High field conduction mechanism of the evaporated cadmium arsenide thin films". ICSE'98. 1998 IEEE International Conference on Semiconductor Electronics. Proceedings (Cat. No.98EX187). pp. 168–174. doi:10.1109/SMELEC.1998.781173. ISBN 978-0-7803-4971-1. S2CID 110904915.
13. Ellison, Hank D. (2007). Handbook of chemical and biological warfare agents. CRC Press. ISBN 978-0-8493-1434-6.
14. Girard, James (2010). Principles of Environmental Chemistry. Jones & Bartlett Learning. ISBN 978-0-7637-5939-1.
15. Somani, Satu M. (2001). Chemical warfare agents: toxicity at low levels. CRC Press. ISBN 978-0-8493-0872-7.
16. Greenwood, p. 584

• Arsenic compounds
• Arsenic
• Chemical compounds by element