Misplaced Pages

Austin 20 hp

Article snapshot taken from Wikipedia with creative commons attribution-sharealike license. Give it a read and then ask your questions in the chat. We can research this topic together.
Motor vehicle
Austin 20 hp
Overview
ManufacturerAustin
Production1913 – 1919
AssemblyLongbridge Works, Northfield, Birmingham
Body and chassis
Classlarge family car, premium quality
Body style
  • open tourer
  • landaulette
  • chassis for bespoke body
Layoutfront engine rear wheel drive
Powertrain
Engine
1913
  • 3160 cc vertical inline four cylinder
June 1914
  • 3610 cc vertical inline four cylinder
Transmission4-speeds and reverse, clutch to elliptic sprung back axle all conventional Austin design
Dimensions
Wheelbase
1913
  • 112 in (2,844.8 mm)
  • 116 in (2,946.4 mm)
  • 120 in (3,048.0 mm)
1914
  • 118 in (2,997.2 mm)
  • 126 in (3,200.4 mm)
  • 129 in (3,276.6 mm)
    track
  • 54 in (1,371.6 mm)
Length
  • not reported
  • 165 in (4,191.0 mm)
Chronology
Predecessornone
SuccessorAustin Twenty
Reciprocating internal combustion engine
20
horsepower
Layout
Displacement
  • 3,160 cc (193 cu in)
  • 3,610 cc (220 cu in)
Cylinder bore
  • 89 mm (3.5 in)
  • 95 mm (3.7 in)
Piston stroke127 mm (5.0 in)
ValvetrainT-head side valve with twin camshafts
Combustion
Fuel system
Fuel typepetrol
Oil systempressure
Cooling systemwater
Output
Power output
1913
  • not reported
    Tax horsepower 19.64
1914
  • 55 bhp (41 kW; 56 PS) @2,250 rpm
    Tax horsepower 22.38

The Austin 20-hp is a mid-sized car premium quality that was made by British manufacturer Austin and first displayed as a chassis in Paris in December 1912, advertised in March 1913 and shown to the public as a complete car at the Olympia Motor Show in November 1913. At that time both the 20 and the 30 were regarded as new models.

While at first glance it may have seemed to take the place within Austin's range of their 18-24 car which was really a 30-40 hp, its engine was just two-thirds of the size of the old car. The new car was not an enlarged 15 but a scaled-down 30. In its introduction and publicity it was always downplayed apparently to contrast with the more powerful Austin 30 hp.

It was the only Austin car in production through the war though in limited quantity.

1913

Pricing

A clearer presentation of how Austin fitted this car into its catalogue is given by 1913 pricing:

four-cylinder
10 hp £260
15 hp £340
20 hp £375
18-24 hp £480 (made obsolete by the new 30 hp)
30 hp £550
six-cylinder
50 hp £650

Bodies

The body displayed at the 1913 Olympia Motor Show was a six or seven seater landaulette. Fitted as standard with a dynamo electric lighting system it cost £675.

Landaulette

Display advertising in the Manchester Guardian under the heading Comfort Carriages described this Marlborough landaulette as smart enough for the most fashionable, accommodating six people including the driver, with Austin detachable steel wheels, Dunlop tyres, electric lighting, ventilator in roof and two emergency seats. In addition a horn was supplied and a kit of tools. Coachwork and trim colour to owner's selection. Quick delivery can be made, price £693.

Phaeton

The 20 hp Vitesse Phaeton was pictured in the same newspaper. It came with a waterproof canvas hood, double-folding windscreen, grooved and studded tyres, detachable wheels (with spare and studded tyre), dynamo lighting system with all lamps, speedometer, lifting jack, tyre pump and levers, horn and kit of tools. Painted and trimmed to client's own colour selection £596:10:0

Mechanicals

The 20-hp retained the by now rare engine design of its predecessors having separately cast cylinders. The engine's 3½ inch cylinder bore pistons came from the 15-hp car and the longer stroke or crankshaft and connecting rods, from the 18-24. The other chassis dimensions were very close to those of the 18–24. The gearbox was an improved rendition of that for the old 15 hp car. Otherwise it was believed the chassis called for no special comment being an example of sound and orthodox design except for the rear suspension. The Austin patent full elliptic rear springs are almost unique among English cars. However the high standard of workmanship and finish in the engine and the whole finely turned out chassis was noted by The Times.

Trial

The car presented for trial was a standard open 5-passenger machine. It was taken out to High Wycombe and Prince's Risborough then over Kop Hill back to London. A strong head wind kept the speed down to 40 mph but on the return a 50 mph pace was easily set and maintained. It is a moderate size of engine but it runs remarkably smoothly and with elasticity. Many other engines of a similar size give greater power but the Austin is serene in its work. The throttle had to be kept wide open to achieve the desired performance and while pick-up and acceleration were good perhaps another form of carburettor might give a great improvement. It is not a fast car on the level or hill-climbing. Kop Hill was climbed with little effort but first gear was required about one hundred yards from the summit.

Gear change is smooth and easy, brakes and suspension are excellent, the engine runs without noise and vibration. The reviewer described it as "a common-sense motor-car". The price of the chassis is £375. Using a catchphrase of the day—it wouldn't pull the skin off a rice pudding.

1914

Revision

A few days after that road-test was published The Autocar announced "The New 20 h.p. Austin", on 6 June 1914. Much more information is held but it contains conflicting data and details are yet to be clarified.

Sports type

From June 1914 a variant was available known as the 20 hp sports type. The major difference was that the engine bore is increased to 95 mm. Pistons and connecting rods are lightened and the valves were given a higher lift camshaft. The steering column was given more rake to allow for a lower seating position.

1915

Gas and coolant flows

In November 1915 both the valves and the induction manifold were enlarged. The factory claimed for this a marked increase in power saying their regular test hill with a maximum gradient of one in six previously required the use of third gear but could now be climbed unfaltering on top gear. There had been no change in gear ratios. The radiator was enlarged and each water jacket beside the exhaust valve port was now separately fed by a large diameter external lead direct from the water pump.

Instruments and controls

Other improvements announced in November 1915 included the fitting of a new instrument board, relocation of the steering column, provision of new-shaped pedals with an improved kind of accelerator pedal. An improved clutch coupling was fitted.

Successor

Austin Twenty intended for mass production (25,000 cars per year) announced 1919

References

  1. ^ The Austin Car. The Times, Tuesday, Jun 02, 1914; pg. 13; Issue 40539
  2. ^ The New 20 h.p. Austin, The Autocar, 6 June 1914
  3. ^ Cars at Olympia, The Automotor Journal, November 8, 1913
  4. ^ David Culshaw, Peter Horrobin, The Complete Catalogue of British Cars 1895-1975, Veloce Publishing, Dorchester UK, 1974 ISBN 9781874105930
  5. Automobilism. The Times, Tuesday, Dec 10, 1912; pg. 12; Issue 40078.
  6. ^ Display advertisement, page viii, The Auto Motor Journal, March 29, 1913
  7. R J Wyatt, The Austin 1905-1952, David & Charles, Newton Abbott, 1981 ISBN 0715379488
  8. ^ The 20 H.P. Austin Car, The Automotor Journal, November 25, 1915
  9. The Motor Show. The Times, Monday, Nov 10, 1913; pg. 13; Issue 40365
  10. Manchester Guardian, 13 March 1914
Austin Motor Company road car timeline, 1906-1939
Type 1900s 1910s 1920s 1930s
6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9
Small family car 7 hp Seven
Eight
10 hp Ten
Family car 12-14 Twelve Light Twelve
Heavy Twelve
Twelve-six Fourteen
Full-size car 15 hp Sixteen or Eighteen Eighteen
20 hp Twenty Twenty-Eight
15-20 18-24
30 hp
25-30 40 hp
50 hp
60 hp
Taxi Austin Twelve
Top Hat
Austin Twelve
Low Loader
Categories: