Misplaced Pages

Kaminsky catalyst

Article snapshot taken from Wikipedia with creative commons attribution-sharealike license. Give it a read and then ask your questions in the chat. We can research this topic together.
Ethylene polymerization catalyst

A Kaminsky catalyst is a catalytic system for alkene polymerization. Kaminsky catalysts are based on metallocenes of group 4 transition metals (Ti, Zr, Hf) activated with methylaluminoxane (MAO). These and other innovations have inspired development of new classes of catalysts that in turn led to commercialization of novel engineering polyolefins.

A constrained geometry organotitanium complex in the (inactive) chloride form

Catalyst development

The catalyst is named after German chemist Walter Kaminsky, who first described it in 1980 along with Hansjörg Sinn and others. Prior to Kaminsky's work, titanium chlorides supported on various materials were widely used (and still are) as heterogeneous catalysts for alkene polymerization. These halides are typically activated by treatment with trimethylaluminium. Kaminsky discovered that titanocene and related complexes emulated some aspects of these Ziegler–Natta catalysts but with low activity. He subsequently found that high activity could be achieved upon activation of these metallocenes with methylaluminoxane (MAO). The MAO serves two roles: (i) alkylation of the metallocene halide and (ii) abstraction of an anionic ligand (chloride or methyl) to give an electrophilic catalyst with a labile coordination site.

Ligand design

Kaminsky's discovery of well-defined, high activity homogeneous catalysts led to many innovations in the design of novel cyclopentadienyl ligands. These innovations include ansa-metallocenes, Cs-symmetric fluorenyl-Cp ligands, constrained geometry catalysts, Some Kaminsky-inspired catalysts use of chiral metallocenes that have bridged cyclopentadienyl rings. These innovations made possible highly stereoselective (or stereoregular) polymerization of α-olefins, some of which have been commercialized.

Using metallocene 1 for polymerization of propene gives atactic polypropylene, while C2 symmetric metallocene 2 and Cs symmetric metallocene 3 catalytic systems produce isotactic polymer and syndiotactic polymer, respectively.

References

  1. ^ Walter Kaminsky (1998). "Highly Active Metallocene Catalysts For Olefin Polymerization". Journal of the Chemical Society, Dalton Transactions (9): 1413–1418. doi:10.1039/A800056E. S2CID 52378598.
  2. ^ Klosin, J.; Fontaine, P. P.; Figueroa, R. (2015). "Development of Group Iv Molecular Catalysts for High Temperature Ethylene-Α-Olefin Copolymerization Reactions". Accounts of Chemical Research. 48 (7): 2004–2016. doi:10.1021/acs.accounts.5b00065. PMID 26151395.
  3. Kaminsky, Walter (2004-08-15). "The discovery of metallocene catalysts and their present state of the art". Journal of Polymer Science Part A: Polymer Chemistry. 42 (16): 3911–3921. doi:10.1002/pola.20292. ISSN 0887-624X.
  4. Sinn, Hansjörg; Kaminsky, Walter; Vollmer, Hans‐Jürgen; Woldt, Rüdiger (1980). ""Living Polymers" on Polymerization with Extremely Productive Ziegler Catalysts". Angewandte Chemie International Edition in English. 19 (5): 390–392. doi:10.1002/anie.198003901. ISSN 0570-0833.
  5. Chen, E. Y.-X.; Marks, T. J. (2000). "Cocatalysts for Metal-Catalyzed Olefin Polymerization: Activators, Activation Processes, and Structure-Activity Relationships". Chem. Rev. 100 (4): 1391–1434. doi:10.1021/cr980462j. PMID 11749269. S2CID 26845820.
  6. Ewen, J. A.; Jones, R. L.; Razavi, A.; Ferrara, J. D. (1988). "Syndiospecific propylene polymerizations with Group IVB metallocenes". Journal of the American Chemical Society. 110 (18): 6255–6256. doi:10.1021/ja00226a056. PMID 22148816.
  7. Shapiro P. J., Bunel E., Scbaefer W. P., Bercaw J. E. (1990). "Scandium Complex 2: A Unique Example of a Single-Component α-Olefin Polymerization Catalyst". Organometallics. 9: 867–869. doi:10.1021/om00117a055.{{cite journal}}: CS1 maint: multiple names: authors list (link)
Categories: