Misplaced Pages

This article may be too technical for most readers to understand. Please help improve it to make it understandable to non-experts, without removing the technical details. (January 2014) (Learn how and when to remove this message)

Activity
Ra 226 radiation source. Activity 3300 Bq (3.3 kBq)
Common symbols	A
SI unit	becquerel
Other units	rutherford, curie
In SI base units	s

Specific activity (symbol a) is the activity per unit mass of a radionuclide and is a physical property of that radionuclide. It is usually given in units of becquerel per kilogram (Bq/kg), but another commonly used unit of specific activity is the curie per gram (Ci/g).

In the context of radioactivity, activity or total activity (symbol A) is a physical quantity defined as the number of radioactive transformations per second that occur in a particular radionuclide. The unit of activity is the becquerel (symbol Bq), which is defined equivalent to reciprocal seconds (symbol s). The older, non-SI unit of activity is the curie (Ci), which is 3.7×10 radioactive decays per second. Another unit of activity is the rutherford, which is defined as 1×10 radioactive decays per second.

The specific activity should not be confused with level of exposure to ionizing radiation and thus the exposure or absorbed dose, which is the quantity important in assessing the effects of ionizing radiation on humans.

Since the probability of radioactive decay for a given radionuclide within a set time interval is fixed (with some slight exceptions, see changing decay rates), the number of decays that occur in a given time of a given mass (and hence a specific number of atoms) of that radionuclide is also a fixed (ignoring statistical fluctuations).

Formulation

Relationship between λ and T_1/2

Radioactivity is expressed as the decay rate of a particular radionuclide with decay constant λ and the number of atoms N:

${\displaystyle -{\frac {dN}{dt}}=\lambda N.}$

The integral solution is described by exponential decay:

${\displaystyle N=N_{0}e^{-\lambda t},}$

where N₀ is the initial quantity of atoms at time t = 0.

Half-life T_1/2 is defined as the length of time for half of a given quantity of radioactive atoms to undergo radioactive decay:

${\displaystyle {\frac {N_{0}}{2}}=N_{0}e^{-\lambda T_{1/2}}.}$

Taking the natural logarithm of both sides, the half-life is given by

${\displaystyle T_{1/2}={\frac {\ln 2}{\lambda }}.}$

Conversely, the decay constant λ can be derived from the half-life T_1/2 as

${\displaystyle \lambda ={\frac {\ln 2}{T_{1/2}}}.}$

Calculation of specific activity

The mass of the radionuclide is given by

${\displaystyle {m}={\frac {N}{N_{\text{A}}}}\times {M},}$

where M is molar mass of the radionuclide, and N_A is the Avogadro constant. Practically, the mass number A of the radionuclide is within a fraction of 1% of the molar mass expressed in g/mol and can be used as an approximation.

Specific radioactivity a is defined as radioactivity per unit mass of the radionuclide:

${\displaystyle a={\frac {\lambda N}{MN/N_{\text{A}}}}={\frac {\lambda N_{\text{A}}}{M}}.}$

Thus, specific radioactivity can also be described by

${\displaystyle a={\frac {N_{\text{A}}\ln 2}{T_{1/2}\times M}}.}$

This equation is simplified to

${\displaystyle a\approx {\frac {4.17\times 10^{23}}{T_{1/2}\times M}}.}$

When the unit of half-life is in years instead of seconds:

${\displaystyle a={\frac {4.17\times 10^{23}}{T_{1/2}\times 365\times 24\times 60\times 60\times M}}\approx {\frac {1.32\times 10^{16}}{T_{1/2}\times M}}.}$

Example: specific activity of Ra-226

For example, specific radioactivity of radium-226 with a half-life of 1600 years is obtained as

${\displaystyle a_{\text{Ra-226}}={\frac {1.32\times 10^{16}}{1600\times 226}}\approx 3.7\times 10^{10}.}$

This value derived from radium-226 was defined as unit of radioactivity known as the curie (Ci).

Calculation of half-life from specific activity

Experimentally measured specific activity can be used to calculate the half-life of a radionuclide.

Where decay constant λ is related to specific radioactivity a by the following equation:

${\displaystyle \lambda ={\frac {a\times M}{N_{\text{A}}}}.}$

Therefore, the half-life can also be described by

${\displaystyle T_{1/2}={\frac {N_{\text{A}}\ln 2}{a\times M}}.}$

Example: half-life of Rb-87

One gram of rubidium-87 and a radioactivity count rate that, after taking solid angle effects into account, is consistent with a decay rate of 3200 decays per second corresponds to a specific activity of 3.2×10 Bq/kg. Rubidium atomic mass is 87 g/mol, so one gram is 1/87 of a mole. Plugging in the numbers:

${\displaystyle T_{1/2}={\frac {N_{\text{A}}\times \ln 2}{a\times M}}\approx {\frac {6.022\times 10^{23}{\text{ mol}}^{-1}\times 0.693}{3200{\text{ s}}^{-1}{\cdot }{\text{g}}^{-1}\times 87{\text{ g/mol}}}}\approx 1.5\times 10^{18}{\text{ s}}\approx 47{\text{ billion years}}.}$

Other calculations

This section may need to be cleaned up. It has been merged from Becquerel.

For a given mass ${\displaystyle m}$ (in grams) of an isotope with atomic mass ${\displaystyle m_{\text{a}}}$ (in g/mol) and a half-life of ${\displaystyle t_{1/2}}$ (in s), the radioactivity can be calculated using:

${\displaystyle A_{\text{Bq}}={\frac {m}{m_{\text{a}}}}N_{\text{A}}{\frac {\ln 2}{t_{1/2}}}}$

With ${\displaystyle N_{\text{A}}}$ = 6.02214076×10 mol, the Avogadro constant.

Since ${\displaystyle m/m_{\text{a}}}$ is the number of moles (${\displaystyle n}$), the amount of radioactivity ${\displaystyle A}$ can be calculated by:

${\displaystyle A_{\text{Bq}}=nN_{\text{A}}{\frac {\ln 2}{t_{1/2}}}}$

For instance, on average each gram of potassium contains 117 micrograms of K (all other naturally occurring isotopes are stable) that has a ${\displaystyle t_{1/2}}$ of 1.277×10 years = 4.030×10 s, and has an atomic mass of 39.964 g/mol, so the amount of radioactivity associated with a gram of potassium is 30 Bq.

Examples

Applications

The specific activity of radionuclides is particularly relevant when it comes to select them for production for therapeutic pharmaceuticals, as well as for immunoassays or other diagnostic procedures, or assessing radioactivity in certain environments, among several other biomedical applications.

References

1. Breeman, Wouter A. P.; Jong, Marion; Visser, Theo J.; Erion, Jack L.; Krenning, Eric P. (2003). "Optimising conditions for radiolabelling of DOTA-peptides with Y, In and Lu at high specific activities". European Journal of Nuclear Medicine and Molecular Imaging. 30 (6): 917–920. doi:10.1007/s00259-003-1142-0. ISSN 1619-7070. PMID 12677301. S2CID 9652140.
2. de Goeij, J. J. M.; Bonardi, M. L. (2005). "How do we define the concepts specific activity, radioactive concentration, carrier, carrier-free and no-carrier-added?". Journal of Radioanalytical and Nuclear Chemistry. 263 (1): 13–18. doi:10.1007/s10967-005-0004-6. ISSN 0236-5731. S2CID 97433328.
3. "SI units for ionizing radiation: becquerel". Resolutions of the 15th CGPM (Resolution 8). 1975. Retrieved 3 July 2015.
4. "Table of Isotopes decay data". Lund University. 1990-06-01. Retrieved 2014-01-12.
5. "Atomic Weights and Isotopic Compositions for All Elements". NIST. Retrieved 2014-01-12.
6. Duursma, E. K. "Specific activity of radionuclides sorbed by marine sediments in relation to the stable element composition". Radioactive contamination of the marine environment (1973): 57–71.
7. Wessels, Barry W. (1984). "Radionuclide selection and model absorbed dose calculations for radiolabeled tumor associated antibodies". Medical Physics. 11 (5): 638–645. Bibcode:1984MedPh..11..638W. doi:10.1118/1.595559. ISSN 0094-2405. PMID 6503879.
8. I. Weeks; I. Beheshti; F. McCapra; A. K. Campbell; J. S. Woodhead (August 1983). "Acridinium esters as high-specific-activity labels in immunoassay". Clinical Chemistry. 29 (8): 1474–1479. doi:10.1093/clinchem/29.8.1474. PMID 6191885.
9. Neves, M.; Kling, A.; Lambrecht, R. M. (2002). "Radionuclide production for therapeutic radiopharmaceuticals". Applied Radiation and Isotopes. 57 (5): 657–664. CiteSeerX 10.1.1.503.4385. doi:10.1016/S0969-8043(02)00180-X. ISSN 0969-8043. PMID 12433039.
10. Mausner, Leonard F. (1993). "Selection of radionuclides for radioimmunotherapy". Medical Physics. 20 (2): 503–509. Bibcode:1993MedPh..20..503M. doi:10.1118/1.597045. ISSN 0094-2405. PMID 8492758.
11. Murray, A. S.; Marten, R.; Johnston, A.; Martin, P. (1987). "Analysis for naturally occuring [sic] radionuclides at environmental concentrations by gamma spectrometry". Journal of Radioanalytical and Nuclear Chemistry. 115 (2): 263–288. doi:10.1007/BF02037443. ISSN 0236-5731. S2CID 94361207.

Further reading

• Fetter, Steve; Cheng, E. T.; Mann, F. M. (1990). "Long-term radioactive waste from fusion reactors: Part II". Fusion Engineering and Design. 13 (2): 239–246. CiteSeerX 10.1.1.465.5945. doi:10.1016/0920-3796(90)90104-E. ISSN 0920-3796.
• Holland, Jason P.; Sheh, Yiauchung; Lewis, Jason S. (2009). "Standardized methods for the production of high specific-activity zirconium-89". Nuclear Medicine and Biology. 36 (7): 729–739. doi:10.1016/j.nucmedbio.2009.05.007. ISSN 0969-8051. PMC 2827875. PMID 19720285.
• McCarthy, Deborah W.; Shefer, Ruth E.; Klinkowstein, Robert E.; Bass, Laura A.; Margeneau, William H.; Cutler, Cathy S.; Anderson, Carolyn J.; Welch, Michael J. (1997). "Efficient production of high specific activity Cu using a biomedical cyclotron". Nuclear Medicine and Biology. 24 (1): 35–43. doi:10.1016/S0969-8051(96)00157-6. ISSN 0969-8051. PMID 9080473.

• Radioactivity quantities