Misplaced Pages

Twinaxial cabling: Difference between revisions

Article snapshot taken from Wikipedia with creative commons attribution-sharealike license. Give it a read and then ask your questions in the chat. We can research this topic together.
Browse history interactively← Previous editContent deleted Content addedVisualWikitext
Revision as of 08:12, 22 November 2018 editRickhk (talk | contribs)8 editsm →100 Gbit Ethernet← Previous edit Latest revision as of 20:49, 9 October 2024 edit undoKvng (talk | contribs)Extended confirmed users, New page reviewers107,936 editsm unpiped links using script. WP:DUPLINK. 
(38 intermediate revisions by 24 users not shown)
Line 1: Line 1:
{{Short description|Type of cabling using shielded pairs of conductors}}
]


]
⚫ '''Twinaxial cabling''', or '''"Twinax"''', is a type of cable similar to ], but with two inner conductors instead of one. Due to cost efficiency it is becoming common in modern (2013) very-short-range high-speed ] applications.

⚫ '''Twinaxial cabling''', or '''twinax''', is a type of cable similar to ], but with two inner conductors in a ] instead of one.<ref>{{cite book | url=https://books.google.com/books?id=nf_ECneNZlsC&dq=twinaxial+cable&pg=PA373 | isbn=978-0-470-59991-4 | title=CISSP for Dummies | date=12 November 2009 | publisher=John Wiley & Sons }}</ref> Due to cost efficiency it is becoming common in modern (2013) very-short-range high-speed ] applications.


==Legacy applications== ==Legacy applications==


===IBM=== ===IBM===
Historically, Twinax was the cable specified for the ] terminals and printers, used with IBM's ], ], ], and ] (formerly known as AS/400) midrange hosts, and with ] machines running ]. The data transmission is half-duplex, balanced transmission, at 1 Mbit/s, on a single shielded, 110 Ω twisted pair.<ref name="one">{{cite news|url=http://www.decisiondata.com/html/tb-whattwinax.htm |publisher=NLynx|title=NLynx Technologies - what is Twinax?|year=2006}}</ref> Historically, twinax was the cable specified for the ] terminals and printers, used with IBM's ], ], ], and ] midrange hosts, and with ] machines running ]. The data transmission is half-duplex, balanced transmission, at 1&nbsp;Mbit/s, on a single shielded, 110 Ω twisted pair.<ref name="one">{{cite news|url=http://www.decisiondata.com/html/tb-whattwinax.htm |publisher=NLynx|title=NLynx Technologies - what is Twinax?|year=2006|archive-url=https://web.archive.org/web/20071006122820/http://www.decisiondata.com/html/tb-whattwinax.htm|archive-date=October 6, 2007|url-status=dead}}</ref>


With Twinax seven devices can be addressed, from workstation address 0 to 6. The devices do not have to be sequential. With twinax seven devices can be addressed, from workstation address 0 to 6. The devices do not have to be sequential.


Twinax is a bus topology that requires termination to function properly. Most Twinax T-connectors have an automatic termination feature. For use in buildings wired with Category 3 or higher twisted pair there are ]s that convert Twinax to twisted pair and hubs that convert from a bus topology to a star topology. Twinax is a bus topology that requires termination to function properly. Most twinax T-connectors have an automatic termination feature. For use in buildings wired with Category 3 or higher twisted pair there are ]s that convert Twinax to twisted pair and hubs that convert from a bus topology to a star topology.


Twinax was designed by IBM. Its main advantages were high speed (1&nbsp;Mbit/s versus 9600&nbsp;bit/s) and multiple addressable devices per connection. The main disadvantage was the requirement for proprietary Twinax cabling with bulky screw-shell connectors. Twinax was designed by IBM. Its main advantages were high speed (1&nbsp;Mbit/s versus 9600&nbsp;bit/s) and multiple addressable devices per connection. The main disadvantage was the requirement for proprietary twinax cabling with bulky screw-shell connectors.


====Physical layer==== ====Physical layer====
Signals are sent differentially over the wires at 1 Mbit/s (1&nbsp;μs/bit&nbsp;±&nbsp;2%), ]d, with ].<ref name=AN516>{{Citation |url=http://www.nalanda.nitc.ac.in/industry/appnotes/Natsemi/AN-516.pdf |title=Interfacing the DP8344 to Twinax |first=Thomas J. |last=Quigley |publisher=National Semiconductor |id=AN-516 |date=March 1988}}</ref> The signal coding is only approximately differential and not completely differentially balanced. In general, one of the two signal lines is driven to −0.32&nbsp;V&nbsp;±&nbsp;20%, while the other carries 0&nbsp;V. This, itself, could be considered as two differential signals of ±0.16&nbsp;V superimposed on a −0.16&nbsp;V common mode level. However, to provide preemphasis, for the first 250&nbsp;ns (1/4 bit time) after a signal is driven low, the negative signal line is driven to −1.6&nbsp;V. During this time, the common-mode voltage is −0.8&nbsp;V. Signals are sent differentially over the wires at 1&nbsp;Mbit/s (1&nbsp;μs/bit&nbsp;±&nbsp;2%), ]d, with ].<ref name=AN516>{{Citation |url=http://www.nalanda.nitc.ac.in/industry/appnotes/Natsemi/AN-516.pdf |title=Interfacing the DP8344 to Twinax |first=Thomas J. |last=Quigley |publisher=National Semiconductor |id=AN-516 |date=March 1988 |archive-url=https://web.archive.org/web/20110615181859/http://www.nalanda.nitc.ac.in/industry/appnotes/Natsemi/AN-516.pdf |archive-date=June 15, 2011 |url-status=dead}}</ref> The signal coding is only approximately differential and not completely differentially balanced. In general, one of the two signal lines is driven to −0.32&nbsp;V&nbsp;±&nbsp;20%, while the other carries 0&nbsp;V. This, itself, could be considered as two differential signals of ±0.16&nbsp;V superimposed on a −0.16&nbsp;V common mode level. However, to provide preemphasis, for the first 250&nbsp;ns (1/4 bit time) after a signal is driven low, the negative signal line is driven to −1.6&nbsp;V. During this time, the common-mode voltage is −0.8&nbsp;V.


This signal is designed to provide a minimum of ±100&nbsp;mV at the end of 152&nbsp;m (500&nbsp;feet) of cable. This signal is designed to provide a minimum of ±100&nbsp;mV at the end of 152&nbsp;m (500&nbsp;feet) of cable.


The two wires are denoted A and B. To encode a 0 bit, A>B for the first half of the bit time, and A&lt;B for the second half. A 1 bit is the opposite. Thus, each signal line is driven low for either 500 or 1000&nbsp;ns at a time, of which the first 250&nbsp;ns is emphasized. The two wires are denoted A and B. To encode a 0 bit, A>B for the first half of the bit time, and A&lt;B for the second half. A 1 bit is the opposite. Thus, each signal line is driven low for either 500 or 1000&nbsp;ns at a time, of which the first 250&nbsp;ns is emphasized.

The plug consists of two pins of the same gender.<ref name=stonewall-ibm/>


====Data link layer==== ====Data link layer====
A message begins with five normal 1 bits (A driven low for 500&nbsp;ns, then B driven low for 500&nbsp;ns) for bit synchronization, followed by a special frame sync pattern, three bit times long, that violates the usual Manchester encoding rules. A is driven low for 1500 ns, then B is driven low for 1500&nbsp;ns. This is like a 1&nbsp;bit sent at 1/3 normal speed (although the preemphasis pulses remain 250 ns long).<ref name=AN516/><ref name=anzacom>{{Citation |url=http://www.anzacom.com/support/TWINAX.HTM |title=Twinax Cable Information |publisher=Anzac Computer Equipment Corporation |date=2004-07-22 |accessdate=2009-01-30}}</ref> A message begins with five normal 1 bits (A driven low for 500&nbsp;ns, then B driven low for 500&nbsp;ns) for bit synchronization, followed by a special frame sync pattern, three bit times long, that violates the usual Manchester encoding rules. A is driven low for 1500 ns, then B is driven low for 1500&nbsp;ns. This is like a 1&nbsp;bit sent at 1/3 normal speed (although the preemphasis pulses remain 250 ns long).<ref name=AN516/><ref name=anzacom>{{Citation |url=https://www.anzacom.com/support/TWINAX.HTM |title=Twinax Cable Information |publisher=Anzac Computer Equipment Corporation |date=2004-07-22 |accessdate=2009-01-30 |archive-url=https://web.archive.org/web/20110304020219/http://www.anzacom.com/support/TWINAX.HTM |archive-date=March 4, 2011 |url-status=live}}</ref>


This pattern is followed by up to 256 16-bit data frames. Each data frame consists of a start bit of 1, an 8-bit data field, a 3-bit station address, and an even parity bit (which includes the start bit, so it equivalent to odd parity over the data and address fields only). This is then followed by three or more fill bits of 0. Unusually for an IBM protocol, the bits within each frame are sent ].<ref name=anzacom/> This pattern is followed by up to 256 16-bit data frames. Each data frame consists of a start bit of 1, an 8-bit data field, a 3-bit station address, and an even parity bit (which includes the start bit, so it equivalent to odd parity over the data and address fields only). This is then followed by three or more fill bits of 0. Unusually for an IBM protocol, the bits within each frame are sent ].<ref name=anzacom/>


All messages are sent between the controller (master) and one slave device. The first frame in a message from the controller contains the device's address, from 0 to 6. The address field of following frames can be any value from 0 to 6, although is usually set to the device's address as well. The final frame in a message includes an address of 7 (all ones) as an end-of-message (EOM) indicator. A single-frame message does not have an EOM indicator. All messages are sent between the controller (master) and one slave device. The first frame in a message from the controller contains the device's address, from 0 to 6. The address field of following frames can be any value from 0 to 6, although is usually set to the device's address as well. The final frame in a message includes an address of 7 (all ones) as an end-of-message (EOM) indicator. A single-frame message does not have an EOM indicator.


When a command calls for a response, the device is expected to respond in 30&nbsp;to 80&nbsp;μs. A device's response also consists of up to 256 frames, and includes its address in all frames but the last. In this case, a single-frame response includes the EOM address, and the controller assumes it comes from the device it most recently addressed. When a command calls for a response, the device is expected to respond in 30&nbsp;to 80&nbsp;μs. A device's response also consists of up to 256 frames, and includes its address in all frames but the last. In this case, a single-frame response includes the EOM address, and the controller assumes it comes from the device it most recently addressed.


Generally, the first frame in a message is a command byte, and following frames are associated data.<ref name=anzacom/><ref name=AN641>{{Citation |url=http://www.nalanda.nitc.ac.in/industry/appnotes/Natsemi/AN-641.pdf |title=MPA-II—A Multi-Protocol Terminal Emulation Adapter Using the DP8344 |first1=Thomas |last1=Norcross |first2=Paul J. |last2=Patchen |first3=Thomas J. |last3=Quigley |first4=Tim |last4=Short |first5=Debra |last5=Worsley |first6=Laura |last6=Johnson |publisher=National Semiconductor |id=AN-641 |date=April 1995}}</ref> Generally, the first frame in a message is a command byte, and following frames are associated data.<ref name=anzacom/><ref name=AN641>{{Citation |url=http://www.nalanda.nitc.ac.in/industry/appnotes/Natsemi/AN-641.pdf |title=MPA-II—A Multi-Protocol Terminal Emulation Adapter Using the DP8344 |first1=Thomas |last1=Norcross |first2=Paul J. |last2=Patchen |first3=Thomas J. |last3=Quigley |first4=Tim |last4=Short |first5=Debra |last5=Worsley |first6=Laura |last6=Johnson |publisher=National Semiconductor |id=AN-641 |date=April 1995 |archive-url=https://web.archive.org/web/20120305001444/https://www.nalanda.nitc.ac.in/industry/appnotes/Natsemi/AN-641.pdf |archive-date=March 5, 2012 |url-status=dead}}</ref>

===NEC===
] system also uses this kind of cable for networking.{{Citation needed|date=May 2008}}


===MIL-STD-1553=== ===MIL-STD-1553===
] specifies that the data bus should have ] between 70 and 85&nbsp;ohms, while the industry has standardized on 78&nbsp;ohms. Likewise, the industry has generally standardized on the cable known as Twinax cable that has a characteristic impedance of 78&nbsp;ohms. ] specifies that the data bus should have ] between 70 and 85&nbsp;ohms, while the industry has standardized on 78&nbsp;ohms. Likewise the industry has generally standardized on the cable known as twinax cable that has a characteristic impedance of 78&nbsp;ohms.


==Current applications== ==Current applications==


===SFP+ Direct-Attach Copper (10GSFP+Cu)=== === Networking (Direct-Attach Copper) ===
{{main|Small Form-factor Pluggable}}

] ]
This is a copper ] cable which comes in either an active or passive Twinax (twinaxial) cable assembly and connects directly into an ] housing. An active Twinax cable has active electronic components in the SFP+ housing to improve the signal quality; a passive Twinax cable is mainly just a straight "wire" and contains few components. Generally, Twinax cables shorter than 7 meters are passive and those longer than 7 meters are active, but this may vary from vendor to vendor. SFP+ Direct Attach Copper (DAC) is a popular choice for 10G Ethernet reaches up to 10&nbsp;m<ref>{{cite web|url=http://communities.intel.com/community/openportit/server/blog/2008/03/26/10-gigabit-ethernet-alphabet-soup-never-tasted-so-good|title=10 gigabit Ethernet - alphabet soup never tasted so good|archiveurl=https://www.webcitation.org/5j5GctcM9|archivedate=2009-08-16|deadurl=no|accessdate=2009-08-13}}</ref> due to low latency and low cost. Direct-Attach Copper (DAC) is a type of standard cabling used in Small Form-factor Pluggable (SFP) Ethernet, initially defined with {{vanchor|SFP+ Direct-Attach Copper (10GSFP+Cu)}}, which provides ] over either an active or passive twinax cable assembly and connects directly into an ] housing. An active twinax cable has active electronic components in the SFP+ housing to improve the signal quality; a passive twinax cable is mainly just a straight "wire" and contains few components. Generally, twinax cables shorter than 7 meters are passive and those longer than 7 meters are active, but this may vary from vendor to vendor. SFP+ Direct Attach Copper (DAC) is a popular choice for 10G Ethernet reaches up to 10&nbsp;m<ref>{{cite web|url=http://communities.intel.com/community/openportit/server/blog/2008/03/26/10-gigabit-ethernet-alphabet-soup-never-tasted-so-good|title=10 gigabit Ethernet - alphabet soup never tasted so good|archiveurl=https://web.archive.org/web/20090308012635/http://communities.intel.com/community/openportit/server/blog/2008/03/26/10-gigabit-ethernet-alphabet-soup-never-tasted-so-good|archivedate=2009-03-08|url-status=usurped|accessdate=2009-08-13}}</ref> due to low latency and low cost.


One major application is connecting network hardware through their SFP+ interfaces. This type of connection is able to transmit at 10 gigabits/second full duplex speed over 5 meter distances. Moreover, this setup offers 15 to 25 times lower transceiver latency than current 10GBASE-T ]/]/] cabling systems: 0.1&nbsp;μs for Twinax with SFP+ versus 1.5 to 2.5&nbsp;μs for current 10GBASE-T specification. The power draw of Twinax with SFP+ is around 0.1&nbsp;watts, which is also much better than 4–8&nbsp;watts for 10GBASE-T. One major application is connecting network hardware through their SFP+ interfaces. This type of connection is able to transmit at 10 gigabits/second full duplex speed over 5 meter distances. Moreover, this setup offers 15 to 25 times lower transceiver latency than current 10GBASE-T ]/]/] cabling systems: 0.1&nbsp;μs for Twinax with SFP+ versus 1.5 to 2.5&nbsp;μs for current 10GBASE-T specification. The power draw of Twinax with SFP+ is around 0.1&nbsp;watts, which is also much better than 4–8&nbsp;watts for 10GBASE-T.


As always with cabling, one of the consideration points is the ] (BER). Twinax copper cabling has a BER of better than 10<sup>−18</sup> according to Cisco, and therefore is acceptable for applications in critical environments. As always with cabling, one of the consideration points is the ] (BER). Twinax copper cabling has a BER of better than 10<sup>−18</sup> according to Cisco, and therefore is acceptable for applications in critical environments.
Line 50: Line 53:
{| class="wikitable floatright" style="text-align: center; margin-left: 1.5em;" {| class="wikitable floatright" style="text-align: center; margin-left: 1.5em;"
|- |-
! ] cable size !! Sustained ] ! ] cable size !! Sustained ]
|- |-
| 24 || {{Convert|1.5|in|mm}} | 24 || {{Convert|1.5|in|mm}}
Line 61: Line 64:
|} |}


Cables must not be bent below their minimum ],<ref>{{cite web|url=http://www.sfpcables.com/exemption/important_notice.html|title=Recommended minimum bend radii for QSFP+ and SFP+ cables|accessdate=2014-04-24}}</ref><ref>{{cite web|url=http://www.gore.com/MungoBlobs/84/101/SFPplus-Bend-Radius.pdf|title=Temporary and Sustained Bend Radii for GORE™ SFP+ cables|accessdate=2014-04-24}}</ref> which depends upon cable size as expressed in ]. The table on the right summarizes minimum values typically admitted for SFP+ sustained ]es. Cables must not be bent below their minimum ],<ref>{{cite web|url=https://www.sfpcables.com/exemption/important_notice.html|title=Recommended minimum bend radii for QSFP+ and SFP+ cables|accessdate=2014-04-24|archive-url=https://web.archive.org/web/20140424132648/http://www.sfpcables.com/exemption/important_notice.html|archive-date=2014-04-24|url-status=live}}</ref><ref>{{cite web|url=http://www.gore.com/MungoBlobs/84/101/SFPplus-Bend-Radius.pdf|title=Temporary and Sustained Bend Radii for GORE™ SFP+ cables|accessdate=2014-04-24|archive-url=https://web.archive.org/web/20140424160147/http://www.gore.com/MungoBlobs/84/101/SFPplus-Bend-Radius.pdf|archive-date=2014-04-24|url-status=dead}}</ref> which depends upon cable size as expressed in AWG. The table on the right summarizes minimum values typically admitted for SFP+ sustained ]es.


This SFP+ Twinax DAC is also referred to as "10GBASE-CR" by some manufacturers,<ref>{{cite web|url=http://www.aristanetworks.com/en/products/transceiversandcables|title=Arista Networks Transceivers & Cables|accessdate=2012-03-28}}</ref> even though there is no IEEE or other standard with that name. This SFP+ twinax DAC is also referred to as "10GBASE-CR" or "10GBASE-CR1" by some manufacturers,<ref>{{cite web|url=https://www.aristanetworks.com/en/products/transceiversandcables|title=Arista Networks Transceivers & Cables|accessdate=2012-03-28|archive-url=https://web.archive.org/web/20140512232222/http://www.arista.com/en/products/transceivers-cables|archive-date=May 12, 2014|url-status=live}}</ref> even though there is no IEEE or other standard with that name.


=== 100 Gbit Ethernet === ==== Higher rates ====
A 40&nbsp;Gbps QSFP+ (Quad SFP+) was defined in 2012.<ref>SFF SFF-8436</ref> 802.3ba-2010 defines 40 Gigabit Ethernet over this connection as "40GBASE-CR4" and a 100 Gigabit connection over three of these connections named 100GBASE-CR10 (now in phase out).
40GBASE-CR4 and 100GBASE-CR10 physical layers using 7&nbsp;m twin-axial cable are being developed as part of the ] specifications by the IEEE 802.3bj workgroup; 100G QSFP28 DAC is the main type for this application. 100G QSFP28 to 4xSFP28 breakout cable <ref>{{Cite web|url=https://www.optcore.net/product/100g-qsfp28-to-4x25g-sfp28-passive-direct-attach-copper-breakout-cable/|title=100G QSFP28 to 25G SFP28 breakout Cable|last=|first=|date=|website=|publisher=|access-date=}}</ref> and 40G QSFP28 to 4xSFP+ breakout cable <ref>{{Cite web|url=https://www.optcore.net/product/40g-qsfp-to-4xsfp-1m-breakout-dac-direct-attach-copper-twinax-cable/|title=40G QSFP to SFP+ breakout Cable|last=|first=|date=|website=|publisher=|access-date=}}</ref>are also available for connectivity between different device slot.

SFP28, which runs at 28&nbsp;Gbps for 25 Gigabit Ethernet (25GBASE-CR1), was defined in 2014; a quad version (QSFP28) capable of running 100&nbsp;Gbps was also defined.<ref>SFF SFF-8402</ref> The newer QSFP28 connection runs 100GBASE-CR4 Ethernet (802.3bj-2010).

SFP112 was defined in 2018, with 100&nbsp;Gbps per pair. All these versions retain the same length limit.


=== SATA 3.0 cables === === SATA 3.0 cables ===
] ]


] cables are implemented using twinax.<ref>{{citation |url=https://sata-io.org/system/files/specifications/SerialATA_Revision_3_1_Gold.pdf |page=63 |quote=The signal cable wire consists of two twinax sections in a common outer sheath. |title=Serial ATA Revision 3.1 |access-date=2024-03-07}}</ref>
] cables are implemented using Twinax (twinaxial cable).


===DisplayPort=== ===DisplayPort===
Many manufacturers of ] cabling are also using Twinax configurations to accommodate the strict insertion loss, return loss, and crosstalk requirements for the 2.7&nbsp;Gbit/s signaling rate. Many manufacturers of ] cabling are also using twinax configurations to accommodate the strict insertion loss, return loss, and crosstalk requirements for the 2.7&nbsp;Gbit/s signaling rate.


===MIL-STD-1553=== ===MIL-STD-1553===
The cable used to connect the ] bus and stub devices has a characteristic impedance of 78 ohms at 1&nbsp;MHz. A 2-conductor twisted-pair cable known as Twinax is used to connect the bus and stub devices. The insulated pairs are balanced and have an overall shielding braid around the pairs. The twisting of the signal-carrying pairs theoretically cancels any random induced noise caused by the pair. The two internal dielectric fillers separate the braid from the pairs to minimize the leakage capacitance to ground. The fillers also assist in uniform twisting of the pairs. The 90% braid coverage protects the pair from external noise. The PVC outer jacket cable is suitable for laboratory use, while the high-temperature rated outer jacket cable is applicable for vehicle use. The cable used to connect the ] bus and stub devices has a characteristic impedance of 78 ohms at 1&nbsp;MHz. A 2-conductor twisted-pair cable known as twinax is used to connect the bus and stub devices. The insulated pairs are balanced and have an overall shielding braid around the pairs. The twisting of the signal-carrying pairs theoretically cancels any random induced noise caused by the pair. The two internal dielectric fillers separate the braid from the pairs to minimize the leakage capacitance to ground. The fillers also assist in uniform twisting of the pairs. The 90% braid coverage protects the pair from external noise. The PVC outer jacket cable is suitable for laboratory use, while the high-temperature rated outer jacket cable is applicable for vehicle use.


A concentric bayonet plug known as "TRB" is used.<ref>{{cite web |title=TRB MIL-STD-1553B Twinax/Triax Connectors {{!}} Trompeter |url=https://www.belfuse.com/product-detail/trompeter-twinax-triax-solutions-twinax-triax-connectors-trb-twinax-triax-connectors?navCategory=twinaxTriaxConnectorsTwinaxTriaxSolutionstrompeterCinchConnectivitySolutionsProductType |website=www.belfuse.com}}</ref>
⚫ ==See also==
{{Portal|Information technology}}


⚫ ==See also==
* ] * ]
* ] * ]
* ]
* ] * ]


==References== ==References==
{{Reflist|30em}} {{reflist}}


==External links== ==External links==
* *
* from MilesTek Corporation * from MilesTek Corporation ({{webarchive|url=https://web.archive.org/web/20120224080055/http://www.milestek1553.com/tech.asp|date=February 24, 2012}})


] ]

Latest revision as of 20:49, 9 October 2024

Type of cabling using shielded pairs of conductors
Twinaxial plug (style used by IBM; other designs exist)

Twinaxial cabling, or twinax, is a type of cable similar to coaxial cable, but with two inner conductors in a twisted pair instead of one. Due to cost efficiency it is becoming common in modern (2013) very-short-range high-speed differential signaling applications.

Legacy applications

IBM

Historically, twinax was the cable specified for the IBM 5250 terminals and printers, used with IBM's System/34, System/36, System/38, and IBM AS/400 midrange hosts, and with IBM Power Systems machines running IBM i. The data transmission is half-duplex, balanced transmission, at 1 Mbit/s, on a single shielded, 110 Ω twisted pair.

With twinax seven devices can be addressed, from workstation address 0 to 6. The devices do not have to be sequential.

Twinax is a bus topology that requires termination to function properly. Most twinax T-connectors have an automatic termination feature. For use in buildings wired with Category 3 or higher twisted pair there are baluns that convert Twinax to twisted pair and hubs that convert from a bus topology to a star topology.

Twinax was designed by IBM. Its main advantages were high speed (1 Mbit/s versus 9600 bit/s) and multiple addressable devices per connection. The main disadvantage was the requirement for proprietary twinax cabling with bulky screw-shell connectors.

Physical layer

Signals are sent differentially over the wires at 1 Mbit/s (1 μs/bit ± 2%), Manchester coded, with preemphasis. The signal coding is only approximately differential and not completely differentially balanced. In general, one of the two signal lines is driven to −0.32 V ± 20%, while the other carries 0 V. This, itself, could be considered as two differential signals of ±0.16 V superimposed on a −0.16 V common mode level. However, to provide preemphasis, for the first 250 ns (1/4 bit time) after a signal is driven low, the negative signal line is driven to −1.6 V. During this time, the common-mode voltage is −0.8 V.

This signal is designed to provide a minimum of ±100 mV at the end of 152 m (500 feet) of cable.

The two wires are denoted A and B. To encode a 0 bit, A>B for the first half of the bit time, and A<B for the second half. A 1 bit is the opposite. Thus, each signal line is driven low for either 500 or 1000 ns at a time, of which the first 250 ns is emphasized.

The plug consists of two pins of the same gender.

Data link layer

A message begins with five normal 1 bits (A driven low for 500 ns, then B driven low for 500 ns) for bit synchronization, followed by a special frame sync pattern, three bit times long, that violates the usual Manchester encoding rules. A is driven low for 1500 ns, then B is driven low for 1500 ns. This is like a 1 bit sent at 1/3 normal speed (although the preemphasis pulses remain 250 ns long).

This pattern is followed by up to 256 16-bit data frames. Each data frame consists of a start bit of 1, an 8-bit data field, a 3-bit station address, and an even parity bit (which includes the start bit, so it equivalent to odd parity over the data and address fields only). This is then followed by three or more fill bits of 0. Unusually for an IBM protocol, the bits within each frame are sent lsbit-first.

All messages are sent between the controller (master) and one slave device. The first frame in a message from the controller contains the device's address, from 0 to 6. The address field of following frames can be any value from 0 to 6, although is usually set to the device's address as well. The final frame in a message includes an address of 7 (all ones) as an end-of-message (EOM) indicator. A single-frame message does not have an EOM indicator.

When a command calls for a response, the device is expected to respond in 30 to 80 μs. A device's response also consists of up to 256 frames, and includes its address in all frames but the last. In this case, a single-frame response includes the EOM address, and the controller assumes it comes from the device it most recently addressed.

Generally, the first frame in a message is a command byte, and following frames are associated data.

MIL-STD-1553

MIL-STD-1553 specifies that the data bus should have characteristic impedance between 70 and 85 ohms, while the industry has standardized on 78 ohms. Likewise the industry has generally standardized on the cable known as twinax cable that has a characteristic impedance of 78 ohms.

Current applications

Networking (Direct-Attach Copper)

Main article: Small Form-factor Pluggable
A DAC cable has SFP+ plugs at each end integrated.

Direct-Attach Copper (DAC) is a type of standard cabling used in Small Form-factor Pluggable (SFP) Ethernet, initially defined with SFP+ Direct-Attach Copper (10GSFP+Cu), which provides 10 Gigabit Ethernet over either an active or passive twinax cable assembly and connects directly into an SFP+ housing. An active twinax cable has active electronic components in the SFP+ housing to improve the signal quality; a passive twinax cable is mainly just a straight "wire" and contains few components. Generally, twinax cables shorter than 7 meters are passive and those longer than 7 meters are active, but this may vary from vendor to vendor. SFP+ Direct Attach Copper (DAC) is a popular choice for 10G Ethernet reaches up to 10 m due to low latency and low cost.

One major application is connecting network hardware through their SFP+ interfaces. This type of connection is able to transmit at 10 gigabits/second full duplex speed over 5 meter distances. Moreover, this setup offers 15 to 25 times lower transceiver latency than current 10GBASE-T Cat 6/Cat 6A/Cat 7 cabling systems: 0.1 μs for Twinax with SFP+ versus 1.5 to 2.5 μs for current 10GBASE-T specification. The power draw of Twinax with SFP+ is around 0.1 watts, which is also much better than 4–8 watts for 10GBASE-T.

As always with cabling, one of the consideration points is the bit error ratio (BER). Twinax copper cabling has a BER of better than 10 according to Cisco, and therefore is acceptable for applications in critical environments.

AWG cable size Sustained bend radius
24 1.5 inches (38 mm)
26 1.3 inches (33 mm)
28 1.0 inch (25 mm)
30 0.9 inches (23 mm)

Cables must not be bent below their minimum bend radius, which depends upon cable size as expressed in AWG. The table on the right summarizes minimum values typically admitted for SFP+ sustained bend radiuses.

This SFP+ twinax DAC is also referred to as "10GBASE-CR" or "10GBASE-CR1" by some manufacturers, even though there is no IEEE or other standard with that name.

Higher rates

A 40 Gbps QSFP+ (Quad SFP+) was defined in 2012. 802.3ba-2010 defines 40 Gigabit Ethernet over this connection as "40GBASE-CR4" and a 100 Gigabit connection over three of these connections named 100GBASE-CR10 (now in phase out).

SFP28, which runs at 28 Gbps for 25 Gigabit Ethernet (25GBASE-CR1), was defined in 2014; a quad version (QSFP28) capable of running 100 Gbps was also defined. The newer QSFP28 connection runs 100GBASE-CR4 Ethernet (802.3bj-2010).

SFP112 was defined in 2018, with 100 Gbps per pair. All these versions retain the same length limit.

SATA 3.0 cables

Cross section of a SATA 3.0 cable, showing the dual twinax conductors for the differential pairs.

SATA 3.0 cables are implemented using twinax.

DisplayPort

Many manufacturers of DisplayPort cabling are also using twinax configurations to accommodate the strict insertion loss, return loss, and crosstalk requirements for the 2.7 Gbit/s signaling rate.

MIL-STD-1553

The cable used to connect the MIL-STD-1553 bus and stub devices has a characteristic impedance of 78 ohms at 1 MHz. A 2-conductor twisted-pair cable known as twinax is used to connect the bus and stub devices. The insulated pairs are balanced and have an overall shielding braid around the pairs. The twisting of the signal-carrying pairs theoretically cancels any random induced noise caused by the pair. The two internal dielectric fillers separate the braid from the pairs to minimize the leakage capacitance to ground. The fillers also assist in uniform twisting of the pairs. The 90% braid coverage protects the pair from external noise. The PVC outer jacket cable is suitable for laboratory use, while the high-temperature rated outer jacket cable is applicable for vehicle use.

A concentric bayonet plug known as "TRB" is used.

See also

References

  1. ^ "IBM 4236482 Eq. - Stonewall Cable". www.stonewallcable.com.
  2. Even among BNC-like bayonet connectors, there are at least three Twinax designs (IBM, "TRB" concentric with varying lug counts, and a polarized shape with one male & one female on each end). See drawings at "Twinax Connectors - RF Connectors | Amphenol RF". www.amphenolrf.com.
  3. CISSP for Dummies. John Wiley & Sons. 12 November 2009. ISBN 978-0-470-59991-4.
  4. "NLynx Technologies - what is Twinax?". NLynx. 2006. Archived from the original on October 6, 2007.
  5. ^ Quigley, Thomas J. (March 1988), Interfacing the DP8344 to Twinax (PDF), National Semiconductor, AN-516, archived from the original (PDF) on June 15, 2011
  6. ^ Twinax Cable Information, Anzac Computer Equipment Corporation, 2004-07-22, archived from the original on March 4, 2011, retrieved 2009-01-30
  7. Norcross, Thomas; Patchen, Paul J.; Quigley, Thomas J.; Short, Tim; Worsley, Debra; Johnson, Laura (April 1995), MPA-II—A Multi-Protocol Terminal Emulation Adapter Using the DP8344 (PDF), National Semiconductor, AN-641, archived from the original (PDF) on March 5, 2012
  8. "10 gigabit Ethernet - alphabet soup never tasted so good". Archived from the original on 2009-03-08. Retrieved 2009-08-13.
  9. "Recommended minimum bend radii for QSFP+ and SFP+ cables". Archived from the original on 2014-04-24. Retrieved 2014-04-24.
  10. "Temporary and Sustained Bend Radii for GORE™ SFP+ cables" (PDF). Archived from the original (PDF) on 2014-04-24. Retrieved 2014-04-24.
  11. "Arista Networks Transceivers & Cables". Archived from the original on May 12, 2014. Retrieved 2012-03-28.
  12. SFF SFF-8436
  13. SFF SFF-8402
  14. Serial ATA Revision 3.1 (PDF), p. 63, retrieved 2024-03-07, The signal cable wire consists of two twinax sections in a common outer sheath.
  15. "TRB MIL-STD-1553B Twinax/Triax Connectors | Trompeter". www.belfuse.com.

External links

Category: