Misplaced Pages

Immersion lithography: Difference between revisions

Article snapshot taken from Wikipedia with creative commons attribution-sharealike license. Give it a read and then ask your questions in the chat. We can research this topic together.
Browse history interactively← Previous editContent deleted Content addedVisualWikitext
Revision as of 11:34, 26 July 2018 edit114.47.23.150 (talk) →Topcoats for immersion lithography← Previous edit Latest revision as of 00:04, 29 October 2024 edit undo98.43.223.22 (talk) →Background: put two sentences from "History" section at the end of this "Background" section. If more cited statements can be made of it's history, feel free to put section back. 
(43 intermediate revisions by 24 users not shown)
Line 1: Line 1:
{{short description|Photolithography technique where there is a layer of water between a lens and a microchip}}
] on top of the ]]] ] on top of the ]]]


'''Immersion lithography''' is a technique used in ] to enhance the resolution and accuracy of the ]. It involves using a liquid medium, typically water, between the lens and the ] during exposure. By using a liquid with a higher ] than air, immersion lithography allows for smaller features to be created on the wafer.<ref>{{Cite journal |last=Flagello |first=Donis |date=2004-01-01 |title=Benefits and limitations of immersion lithography |url=http://nanolithography.spiedigitallibrary.org/article.aspx?doi=10.1117/1.1636768 |journal=Journal of Micro/Nanolithography, MEMS, and MOEMS |language=en |volume=3 |issue=1 |pages=104 |doi=10.1117/1.1636768 |bibcode=2004JMM&M...3..104M |issn=1932-5150}}</ref>
⚫ '''Immersion lithography''' is a ] resolution enhancement technique for manufacturing integrated circuits (ICs) that replaces the usual air gap between the final lens and the wafer surface with a liquid medium that has a ] greater than one. The ] is increased by a factor equal to the ] of the liquid. Current immersion lithography tools use highly purified water for this liquid, achieving feature sizes below 45 nanometers.<ref></ref> ] and ] are currently the only manufacturers of immersion lithography systems.
The idea for immersion lithography was first proposed by B. J. Lin and realized in the 1980s. <ref>Burn J. Lin (1987). "The future of subhalf-micrometer optical lithography". ''Microelectronic Engineering'' '''6''', 31&ndash;51</ref> Immersion lithography is now being extended to sub-20nm nodes through the use of ].


⚫ Immersion lithography replaces the usual air gap between the final lens and the wafer surface with a liquid medium that has a refractive index greater than one. The ] is increased by a factor equal to the refractive index of the liquid. Current immersion lithography tools use highly purified water for this liquid, achieving feature sizes below 45 nanometers.<ref>{{Cite web |url=http://www.dailytech.com/IDF09+Intel+Demonstrates+First+22nm+Chips+Discusses+Die+Shrink+Roadmap/article16312.htm |title=DailyTech - IDF09 Intel Demonstrates First 22nm Chips Discusses Die Shrink Roadmap |access-date=2009-12-07 |archive-url=https://web.archive.org/web/20100828220949/http://www.dailytech.com/IDF09+Intel+Demonstrates+First+22nm+Chips+Discusses+Die+Shrink+Roadmap/article16312.htm |archive-date=2010-08-28 |url-status=dead }}</ref>
⚫ The ability to resolve features in optical lithography is directly related to the ] of the imaging equipment, the numerical aperture being the sine of the maximum refraction angle multiplied by the refractive index of the medium through which the light travels. The lenses in the highest resolution "dry" photolithography scanners focus light in a cone whose boundary is nearly parallel to the wafer surface. As it is impossible to increase resolution by further refraction, additional resolution is obtained by inserting an immersion medium with a higher index of refraction between the lens and the wafer. The blurriness is reduced by a factor equal to the refractive index of the medium. For example, for water immersion using ] at 193&nbsp;nm wavelength, the index of refraction is 1.44.


==Background==
⚫ The resolution enhancement from immersion lithography is about 30-40% (depending on materials used). However, the depth of focus, or tolerance in wafer topography flatness, is improved compared to the corresponding "dry" tool at the same resolution.<ref>B. J. Lin, J. Microlith Microfab. Microsyst. 1, 7 (2002).</ref>
⚫ The ability to resolve features in ] is directly related to the ] of the imaging equipment, the numerical aperture being the sine of the maximum refraction angle multiplied by the ] of the medium through which the light travels. The lenses in the highest resolution "dry" photolithography scanners focus light in a cone whose boundary is nearly parallel to the wafer surface. As it is impossible to increase resolution by further refraction, additional resolution is obtained by inserting an immersion medium with a higher index of refraction between the lens and the wafer. The blurriness is reduced by a factor equal to the refractive index of the medium. For example, for water immersion using ] at 193&nbsp;nm wavelength, the index of refraction is 1.44.<ref>{{Cite book |last1=Smith |first1=Bruce W. |last2=Kang |first2=Hoyoung |last3=Bourov |first3=Anatoly |last4=Cropanese |first4=Frank |last5=Fan |first5=Yongfa |title=Optical Microlithography XVI |chapter=Water immersion optical lithography for 45-nm node |editor-first1=Anthony |editor-last1=Yen |date=2003-06-26 |chapter-url=https://www.spiedigitallibrary.org/conference-proceedings-of-spie/5040/0000/Water-immersion-optical-lithography-for-the-45-nm-node/10.1117/12.485489.full |publisher=SPIE |volume=5040 |pages=679–689 |doi=10.1117/12.485489|bibcode=2003SPIE.5040..679S }}</ref>


⚫ The resolution enhancement from immersion lithography is about 30–40% depending on materials used. However,{{clarify|date=November 2020|reason="However" implies a contrast, but both sentences describe advantages.}} the depth of focus, or tolerance in wafer topography flatness, is improved compared to the corresponding "dry" tool at the same resolution.<ref>B. J. Lin, J. Microlith Microfab. Microsyst. 1, 7 (2002).</ref>
==Defects in immersion lithography==
⚫ Defect concerns, e.g., water left behind (watermarks) and loss of resist-water adhesion (air gap or bubbles), have led to considerations of using a topcoat layer directly on top of the photoresist.<ref>Y. Wei and R. L. Brainard, Advanced Processes for 193-nm Immersion Lithography, (c) SPIE 2009, Ch.6.</ref> This topcoat would serve as a barrier for chemical diffusion between the liquid medium and the photoresist. In addition, the interface between the liquid and the topcoat would be optimized for watermark reduction. At the same time, defects from topcoat use should be avoided.


The idea for immersion lithography was patented in 1984 by Takanashi et al.<ref>A. Takanashi, T. Harada, M. Akeyama, Y. Kondo, T. Karosaki, S. Kuniyoshi, S. Hosaka, and Y. Kawamura, U. S. Patent No. 4,480,910 (1984)</ref> It was also proposed by Taiwanese engineer ] and realized in the 1980s.<ref>] (1987). "The future of subhalf-micrometer optical lithography". ''Microelectronic Engineering'' '''6''', 31&ndash;51</ref> In 2004, ]'s director of ] technology, ], announced that IBM planned to commercialize lithography based on light filtered through water.<ref name="businessweek">{{Cite web |url=http://www.businessweek.com/technology/content/jan2004/tc20040121_4923_tc139.htm |title=A Whole New World of Chips |website=] |url-status=dead |archive-url=https://web.archive.org/web/20110221072557/http://www.businessweek.com/technology/content/jan2004/tc20040121_4923_tc139.htm |archive-date=2011-02-21 }}</ref>
⚫ Topcoats have now been tuned for use as antireflection coatings, especially for hyper-NA (NA>1) cases.<ref>J. C. Jung et al., Proc. SPIE 5753 (2005).</ref>


==Defects==
⚫ ==Polarization impacts on immersion lithography==
⚫ Defect concerns, e.g., water left behind (watermarks) and loss of resist-water adhesion (air gap or bubbles), have led to considerations of using a topcoat layer directly on top of the ].<ref>Y. Wei and R. L. Brainard, Advanced Processes for 193-nm Immersion Lithography, (c) SPIE 2009, Ch.6.</ref> This topcoat would serve as a barrier for chemical diffusion between the liquid medium and the photoresist. In addition, the interface between the liquid and the topcoat would be optimized for watermark reduction. At the same time, defects from topcoat use should be avoided.
⚫ Polarization effects due to high angles of interference in the photoresist also have to be considered as features approach 40&nbsp;nm.<ref>C. Wagner ''et al.'', Proc. SPIE vol. 4000, pp. 344-357 (2000).</ref> Hence, illumination sources generally will need to be azimuthally polarized to match the pole illumination for ideal line-space imaging.<ref>B. W. Smith, L. V. Zavyalova, and A. Estroff, Proc. SPIE 5377 (2004).</ref>


⚫ As of 2005, Topcoats had been tuned for use as ] coatings, especially for hyper-NA (NA>1) cases.<ref>J. C. Jung et al., Proc. SPIE 5753 (2005).</ref>
==Throughput of immersion lithography==
⚫ ]
⚫ Immersion lithography tools currently boast the highest throughputs (275 WPH) as targeted for high volume manufacturing.<ref></ref> This is achieved through higher stage speeds,<ref name=stepscan></ref><ref>I. Bouchoms et al., Proc. SPIE 8326, 83260L (2012)</ref> which in turn, are allowed by higher power ArF laser pulse sources.<ref></ref> Specifically, the throughput is directly proportional to stage speed V, which is related to dose D and rectangular slit width S and slit intensity I<sub>ss</sub> (which is directly related to pulse power) by V=I<sub>ss</sub>*S/D. The slit height is the same as the field height. The slit width S, in turn, is limited by the number of pulses to make the dose (n), divided by the frequency of the laser pulses (f), at the maximum scan speed V<sub>max</sub> by S=V<sub>max</sub>*n/f.<ref name=stepscan/> At a fixed frequency f and pulse number n, the slit width will be proportional to the maximum stage speed. Hence, throughput at a given dose is improved by increasing maximum stage speed as well as increasing pulse power.


By 2008, defect counts on wafers printed by immersion lithography had reached zero level capability.<ref></ref>
⚫ ==Multiple Patterning==

⚫ ]
⚫ ==Polarization impacts==
⚫ ]
⚫ As of 2000, ] effects due to high angles of interference in the photoresist were considered as features approach 40&nbsp;nm.<ref>C. Wagner ''et al.'', Proc. SPIE vol. 4000, pp. 344-357 (2000).</ref> Hence, illumination sources generally need to be azimuthally polarized to match the pole illumination for ideal ] imaging.<ref>B. W. Smith, L. V. Zavyalova, and A. Estroff, Proc. SPIE 5377 (2004).</ref>
⚫ The resolution limit for a 1.35 NA immersion tool operating at 193 nm wavelength is 36 nm. Going beyond this limit in half-pitch requires ]. At the 20nm foundry and memory nodes and beyond, double patterning and triple patterning are already being used with immersion lithography for the densest layers.

==Throughput==
⚫ ]

⚫ As of 1996, this was achieved through higher stage speeds,<ref name=stepscan>{{Cite web |url=https://staticwww.asml.com/doclib/productandservices/94081.pdf |title=M. A. van den Brink et al., Proc. SPIE 2726, 734 (1996). |access-date=2018-07-16 |archive-date=2017-08-09 |archive-url=https://web.archive.org/web/20170809032333/http://staticwww.asml.com/doclib/productandservices/94081.pdf |url-status=dead }}</ref><ref>I. Bouchoms et al., Proc. SPIE 8326, 83260L (2012)</ref> which in turn, as of 2013 were allowed by higher power ] pulse sources.<ref>{{Cite web |last=Inc |first=Rostislav Rokitski, R. Rafac, R. Dubi, J. Thornes, J. melchior, T. Cacouris, M. Haviland and D. Brown, Cymer |date=2013 |title=120-W ArFi Laser Makes Higher-Dose Lithography Possible |url=https://www.photonics.com/Articles/120-W_ArFi_Laser_Makes_Higher-Dose_Lithography/a53765 |access-date=2022-11-09 |website=www.photonics.com}}</ref> Specifically, the throughput is directly proportional to stage speed V, which is related to dose D and rectangular slit width S and slit intensity I<sub>ss</sub> (which is directly related to pulse power) by V=I<sub>ss</sub>*S/D. The slit height is the same as the field height. The slit width S, in turn, is limited by the number of pulses to make the dose (n), divided by the frequency of the laser pulses (f), at the maximum scan speed V<sub>max</sub> by S=V<sub>max</sub>*n/f.<ref name=stepscan/> At a fixed frequency f and pulse number n, the slit width will be proportional to the maximum stage speed. Hence, throughput at a given dose is improved by increasing maximum stage speed as well as increasing pulse power.

According to ASML s product information about twinscan-nxt1980di, immersion lithography tools currently{{when|date=November 2022}} boasted the highest throughputs (275 WPH) as targeted for high volume manufacturing.<ref>{{Cite web |date=nd |title=The ASML NXT:1980Di lithography system |url=https://www.asml.com/en/products/duv-lithography-systems/twinscan-nxt1980di |access-date=2022-11-09 |website=www.asml.com |language=en}}</ref>

⚫ ==Multiple patterning==
⚫ ]
⚫ ]
{{unreferenced section|date=November 2022}}

⚫ The resolution limit for a 1.35 NA immersion tool operating at 193 nm wavelength is 36 nm. Going beyond this limit to sub-] nodes requires ].<ref>Haley, G. (2023). 193i Lithography Takes Center Stage...Again. Semiconductor Engineering. Retrieved from <nowiki>https://semiengineering.com/193i-lithography-takes-center-stage-again</nowiki></ref> At the 20nm foundry and memory nodes and beyond, double patterning and triple patterning are already being used{{when|date=November 2022}} with immersion lithography for the densest layers.

==See also==
*]
*]


==References== ==References==
Line 30: Line 46:
{{DEFAULTSORT:Immersion Lithography}} {{DEFAULTSORT:Immersion Lithography}}
] ]
]


] ]

Latest revision as of 00:04, 29 October 2024

Photolithography technique where there is a layer of water between a lens and a microchip
In immersion lithography, light travels down through a system of lenses and then a pool of water before reaching the photoresist on top of the wafer.

Immersion lithography is a technique used in semiconductor manufacturing to enhance the resolution and accuracy of the lithographic process. It involves using a liquid medium, typically water, between the lens and the wafer during exposure. By using a liquid with a higher refractive index than air, immersion lithography allows for smaller features to be created on the wafer.

Immersion lithography replaces the usual air gap between the final lens and the wafer surface with a liquid medium that has a refractive index greater than one. The angular resolution is increased by a factor equal to the refractive index of the liquid. Current immersion lithography tools use highly purified water for this liquid, achieving feature sizes below 45 nanometers.

Background

The ability to resolve features in optical lithography is directly related to the numerical aperture of the imaging equipment, the numerical aperture being the sine of the maximum refraction angle multiplied by the refractive index of the medium through which the light travels. The lenses in the highest resolution "dry" photolithography scanners focus light in a cone whose boundary is nearly parallel to the wafer surface. As it is impossible to increase resolution by further refraction, additional resolution is obtained by inserting an immersion medium with a higher index of refraction between the lens and the wafer. The blurriness is reduced by a factor equal to the refractive index of the medium. For example, for water immersion using ultraviolet light at 193 nm wavelength, the index of refraction is 1.44.

The resolution enhancement from immersion lithography is about 30–40% depending on materials used. However, the depth of focus, or tolerance in wafer topography flatness, is improved compared to the corresponding "dry" tool at the same resolution.

The idea for immersion lithography was patented in 1984 by Takanashi et al. It was also proposed by Taiwanese engineer Burn J. Lin and realized in the 1980s. In 2004, IBM's director of silicon technology, Ghavam Shahidi, announced that IBM planned to commercialize lithography based on light filtered through water.

Defects

Defect concerns, e.g., water left behind (watermarks) and loss of resist-water adhesion (air gap or bubbles), have led to considerations of using a topcoat layer directly on top of the photoresist. This topcoat would serve as a barrier for chemical diffusion between the liquid medium and the photoresist. In addition, the interface between the liquid and the topcoat would be optimized for watermark reduction. At the same time, defects from topcoat use should be avoided.

As of 2005, Topcoats had been tuned for use as antireflection coatings, especially for hyper-NA (NA>1) cases.

By 2008, defect counts on wafers printed by immersion lithography had reached zero level capability.

Polarization impacts

As of 2000, Polarization effects due to high angles of interference in the photoresist were considered as features approach 40 nm. Hence, illumination sources generally need to be azimuthally polarized to match the pole illumination for ideal line-space imaging.

Throughput

Throughput of immersion lithography tools vs. dose. The throughput vs. dose is compared to for different pulse powers at the same slit width.

As of 1996, this was achieved through higher stage speeds, which in turn, as of 2013 were allowed by higher power ArF laser pulse sources. Specifically, the throughput is directly proportional to stage speed V, which is related to dose D and rectangular slit width S and slit intensity Iss (which is directly related to pulse power) by V=Iss*S/D. The slit height is the same as the field height. The slit width S, in turn, is limited by the number of pulses to make the dose (n), divided by the frequency of the laser pulses (f), at the maximum scan speed Vmax by S=Vmax*n/f. At a fixed frequency f and pulse number n, the slit width will be proportional to the maximum stage speed. Hence, throughput at a given dose is improved by increasing maximum stage speed as well as increasing pulse power.

According to ASML s product information about twinscan-nxt1980di, immersion lithography tools currently boasted the highest throughputs (275 WPH) as targeted for high volume manufacturing.

Multiple patterning

Double patterning by pitch splitting. Double patterning by pitch splitting involves assigning adjacent features to different masks, indicated by different colors.
Triple patterning by pitch splitting. Triple patterning by pitch splitting involves assigning adjacent features to 3 different masks, using three colors.
This section does not cite any sources. Please help improve this section by adding citations to reliable sources. Unsourced material may be challenged and removed. (November 2022) (Learn how and when to remove this message)

The resolution limit for a 1.35 NA immersion tool operating at 193 nm wavelength is 36 nm. Going beyond this limit to sub-20nm nodes requires multiple patterning. At the 20nm foundry and memory nodes and beyond, double patterning and triple patterning are already being used with immersion lithography for the densest layers.

See also

References

  1. Flagello, Donis (2004-01-01). "Benefits and limitations of immersion lithography". Journal of Micro/Nanolithography, MEMS, and MOEMS. 3 (1): 104. Bibcode:2004JMM&M...3..104M. doi:10.1117/1.1636768. ISSN 1932-5150.
  2. "DailyTech - IDF09 Intel Demonstrates First 22nm Chips Discusses Die Shrink Roadmap". Archived from the original on 2010-08-28. Retrieved 2009-12-07.
  3. Smith, Bruce W.; Kang, Hoyoung; Bourov, Anatoly; Cropanese, Frank; Fan, Yongfa (2003-06-26). "Water immersion optical lithography for 45-nm node". In Yen, Anthony (ed.). Optical Microlithography XVI. Vol. 5040. SPIE. pp. 679–689. Bibcode:2003SPIE.5040..679S. doi:10.1117/12.485489.
  4. B. J. Lin, J. Microlith Microfab. Microsyst. 1, 7 (2002).
  5. A. Takanashi, T. Harada, M. Akeyama, Y. Kondo, T. Karosaki, S. Kuniyoshi, S. Hosaka, and Y. Kawamura, U. S. Patent No. 4,480,910 (1984)
  6. Burn J. Lin (1987). "The future of subhalf-micrometer optical lithography". Microelectronic Engineering 6, 31–51
  7. "A Whole New World of Chips". Business Week. Archived from the original on 2011-02-21.
  8. Y. Wei and R. L. Brainard, Advanced Processes for 193-nm Immersion Lithography, (c) SPIE 2009, Ch.6.
  9. J. C. Jung et al., Proc. SPIE 5753 (2005).
  10. B. Rathsack et al., Proc. SPIE 6924, 69244W (2008).
  11. C. Wagner et al., Proc. SPIE vol. 4000, pp. 344-357 (2000).
  12. B. W. Smith, L. V. Zavyalova, and A. Estroff, Proc. SPIE 5377 (2004).
  13. ^ "M. A. van den Brink et al., Proc. SPIE 2726, 734 (1996)" (PDF). Archived from the original (PDF) on 2017-08-09. Retrieved 2018-07-16.
  14. I. Bouchoms et al., Proc. SPIE 8326, 83260L (2012)
  15. Inc, Rostislav Rokitski, R. Rafac, R. Dubi, J. Thornes, J. melchior, T. Cacouris, M. Haviland and D. Brown, Cymer (2013). "120-W ArFi Laser Makes Higher-Dose Lithography Possible". www.photonics.com. Retrieved 2022-11-09. {{cite web}}: |last= has generic name (help)CS1 maint: multiple names: authors list (link)
  16. "The ASML NXT:1980Di lithography system". www.asml.com. nd. Retrieved 2022-11-09.
  17. Haley, G. (2023). 193i Lithography Takes Center Stage...Again. Semiconductor Engineering. Retrieved from https://semiengineering.com/193i-lithography-takes-center-stage-again
Categories: