Misplaced Pages

Silicon controlled rectifier: Difference between revisions

Article snapshot taken from Wikipedia with creative commons attribution-sharealike license. Give it a read and then ask your questions in the chat. We can research this topic together.
Browse history interactively← Previous editContent deleted Content addedVisualWikitext
Revision as of 05:14, 29 December 2015 edit210.212.235.115 (talk) →Forward conduction mode← Previous edit Latest revision as of 01:08, 19 November 2024 edit undoNeondev1 (talk | contribs)70 edits Undid revision 1258264379 by Neondev1 (talk)Tag: Undo 
(208 intermediate revisions by more than 100 users not shown)
Line 1: Line 1:
{{short description|Four-layer solid-state current-controlling device}}
{{more citations needed|date=December 2019}}
{{Infobox electronic component {{Infobox electronic component
|name = Silicon controlled rectifier | name = Silicon controlled rectifier
|image = Image:SCR.JPG | image = Image:SCR de potencia.jpg
|image_size = | image_size =
|caption = Silicon controlled rectifier | caption = Silicon controlled rectifier
| type = ]
|type = ]
|working_principle = | working_principle = Ian M. Mackintosh (])
|invented = Gordon Hall and Frank W. "Bill" Gutzwiller | invented = Gordon Hall and Frank W. "Bill" Gutzwiller
|first_produced = General Electric, 1957 | first_produced = ], 1957
|symbol = ] | symbol = ]
|pins = ], ] and ] | pins = ], ] and ]
}} }}
]
A '''silicon controlled rectifier''' or '''semiconductor controlled rectifier''' is a four-layer ] ]-controlling device. The name "silicon controlled rectifier" is ]'s trade name for a type of ]. The principle of four-layer p–n–p–n switching was developed by Moll, Tanenbaum, Goldey, and Holonyak of ] in 1956.<ref>{{Cite journal|last1=Moll|first1=J.|last2=Tanenbaum|first2=M.|last3=Goldey|first3=J.|last4=Holonyak|first4=N.|date=September 1956|title=P-N-P-N Transistor Switches|journal=Proceedings of the IRE|language=en-US|volume=44|issue=9|pages=1174–1182|doi=10.1109/jrproc.1956.275172|s2cid=51673404|issn=0096-8390}}</ref> The practical demonstration of silicon controlled switching and detailed theoretical behavior of a device in agreement with the experimental results was presented by Dr Ian M. Mackintosh of Bell Laboratories in January 1958.<ref>{{Cite book|url=https://books.google.com/books?id=g9Y_DQAAQBAJ|title=Properties and Applications of Transistors|last=Vasseur|first=J. P.|date=2016-06-06|publisher=Elsevier|isbn=9781483138886|language=en}}</ref><ref>{{Cite news|url=http://news.bbc.co.uk/1/hi/sci/tech/4449711.stm|title=Law that has driven digital life|last=Twist|first=Jo|date=2005-04-18|work=BBC News|access-date=2018-07-27|language=en-GB}}</ref> The SCR was developed by a team of ]s led by Gordon Hall
<ref>{{cite web|last=Ward|first=Jack|title=The Early History of the Silicon Controlled Rectifier|url=http://www.semiconductormuseum.com/Transistors/GE/OralHistories/Gutzwiller/Gutzwiller_Page6.htm|access-date=12 April 2014|page=6}}</ref>
<ref>{{cite web |title=Semiconductors: Thyristors and more |url=https://edisontechcenter.org/semiconductors.html |publisher=Edison Tech Center}}</ref>
<ref>{{cite web |title=SCR is 50 Years Old |url=https://ieeemilestones.ethw.org/w/images/5/52/Milestone_Reference_1-SCR_50_Yrs_Old_Owen_IASMag_2007.pdf |publisher=IEEE Industry Applications Magazine}}</ref>
<ref>{{cite news |last1=Mungenast |first1=J. E. |title=The SCR Revolution |url=https://www.rfcafe.com/references/electronics-world/scr-revolution-electronics-world-february-1966.htm |website=RF Cafe |publisher=General Electric Co.}}</ref>
and commercialized by Frank W. "Bill" Gutzwiller in 1957.


⚫ Some sources define silicon-controlled rectifiers and thyristors as synonymous<ref>{{Cite book|title=Standard Handbook of Electronic Engineering, 5th Edition|last1=Christiansen|first1=Donald|last2=Alexander|first2=Charles|last3=Jurgen|first3=Ronald|date=2005|publisher=Mcgraw-hill|isbn=9780071384216|language=en}}</ref> while other sources define silicon-controlled rectifiers as a ] of the set of thyristors; the latter being devices with at least four layers of alternating ] and ].<ref>
A '''silicon controlled rectifier''' or '''semiconductor-controlled rectifier''' is a four-layer ] ]-controlling device. The name "silicon controlled rectifier" is ]'s trade name for a type of ]. The SCR was developed by a team of ]s led by Gordon Hall<ref>{{cite web|last=Ward|first=Jack|title=The Early History of the Silicon Controlled Rectifier|url=http://www.semiconductormuseum.com/Transistors/GE/OralHistories/Gutzwiller/Gutzwiller_Page6.htm|accessdate=12 April 2014|page=6}}</ref> and commercialized by Frank W. "Bill" Gutzwiller in 1957.

⚫ Some sources define silicon controlled rectifiers and thyristors as synonymous,<ref>Christiansen, Donald; Alexander, Charles K. (2005); ''Standard Handbook of Electrical Engineering (5th ed.)''. McGraw-Hill, ISBN 0-07-138421-9</ref> other sources define silicon controlled rectifiers as a ] of the set of thyristors, those being devices with at least four layers of alternating ] and ].<ref>
] 60747-6 standard ] 60747-6 standard
</ref><ref>Dorf, Richard C., editor (1997), ''Electrical Engineering Handbook (2nd ed.)''. CRC Press, IEEE Press, Ron Powers Publisher, ISBN 0-8493-8574-1</ref> According to Bill Gutzwiller, the terms "SCR" and "controlled rectifier" were earlier, and "thyristor" was applied later, as usage of the device spread internationally.<ref>{{cite web|last=Ward|first=Jack|title=The Early History of the Silicon Controlled Rectifier|url=http://www.semiconductormuseum.com/Transistors/GE/OralHistories/Gutzwiller/Gutzwiller_Page7.htm|accessdate=12 April 2014|page=7}}</ref> </ref><ref>{{Cite book|title=The Electrical Engineering Handbook, Second Edition|last=Dorf|first=Richard C.|date=1997-09-26|publisher=CRC Press|isbn=9781420049763|language=en}}</ref> According to Bill Gutzwiller, the terms "SCR" and "controlled rectifier" were earlier, and "thyristor" was applied later, as usage of the device spread internationally.<ref>{{cite web|last=Ward|first=Jack|title=The Early History of the Silicon Controlled Rectifier|url=http://www.semiconductormuseum.com/Transistors/GE/OralHistories/Gutzwiller/Gutzwiller_Page7.htm|access-date=12 April 2014|page=7}}</ref>


SCRs are unidirectional devices (i.e. can conduct current only in one direction) as opposed to ]s, which are bidirectional (i.e. current can flow through them in either direction). SCRs can be triggered normally only by currents going into the gate as opposed to TRIACs, which can be triggered normally by either a positive or a negative current applied to its gate electrode. SCRs are unidirectional devices (i.e. can conduct current only in one direction) as opposed to ]s, which are bidirectional (i.e. charge carriers can flow through them in either direction). SCRs can be triggered normally only by a positive current going into the gate as opposed to TRIACs, which can be triggered normally by either a positive or a negative current applied to its gate electrode.

==Construction==
The silicon control rectifier (SCR) consists of four layers of semiconductors, which form '''NPNP''' or '''PNPN''' structures. It has three junctions, labeled '''J1''', '''J2''' and '''J3''', and three terminals. The anode terminal of an SCR is connected to the p-type material of a PNPN structure, and the cathode terminal is connected to the n-type layer, while the gate of the SCR is connected to the p-type material nearest to the cathode.<ref>http://www.daenotes.com/electronics/industrial-electronics/silicon-controlled-rectifiers-scr</ref>

An SCR consists of four layers of alternating ] and ] materials.
] is used as the intrinsic semiconductor, to which the proper ]s are added.
The junctions are either diffused or alloyed.
The planar construction is used for low-power SCRs (and all the junctions are diffused).
The ] is used for high-power SCRs.
In this case, junction J2 is obtained by the diffusion method, and then the outer two layers are ]ed to it, since the PNPN pellet is required to handle large ].
It is properly braced with ] or ] plates to provide greater mechanical strength.
One of these plates is hard-soldered to a ] stud, which is threaded for attachment of ].
The doping of PNPN depends on the application of SCR, since its characteristics are similar to those of the ].
Today, the term "thyristor" applies to the larger family of multilayer devices that exhibit bistable state-change behaviour, that is, switching either on or off.

The operation of an SCR and other ]s can be understood in terms of a pair of tightly coupled ]s, arranged to cause the self-latching action:
:]


== Modes of operation == == Modes of operation ==
]
There are three modes of operation for an SCR depending upon the biasing given to it: There are three modes of operation for an SCR depending upon the biasing given to it:
# '''Forward blocking mode (off state)''' # Forward blocking mode (off state)
# '''Forward conduction mode (on state)''' # Forward conduction mode (on state)
# '''Reverse blocking mode (off state)''' # Reverse blocking mode (off state)


===Forward blocking mode=== ===Forward blocking mode===
In this mode of operation, the anode is given a positive voltage while the cathode is given a negative voltage, keeping the gate at zero potential i.e. disconnected. In this case junction '''J1''' and '''J3''' are forward-biased, while '''J2''' is reverse-biased, due to which only a small leakage current exists from the anode to the cathode until the applied voltage reaches its breakover value, at which '''J2''' undergoes avalanche breakdown, and at this breakover voltage it starts conducting, but below breakover voltage it offers very high resistance to the current and is said to be in the off state. SCRs are mainly used in automation industries. In this mode of operation, the anode (+, p-doped side) is given a positive voltage while the cathode (&minus;, n-doped side) is given a negative voltage, keeping the gate at zero (0) potential i.e. disconnected. In this case junction '''J1'''and '''J3''' are ]<nowiki/>ed, while '''J2''' is ]<nowiki/>ed, allowing only a small leakage current from the anode to the cathode. When the applied voltage reaches the breakover value for '''J2''', then '''J2''' undergoes avalanche breakdown. At this breakover voltage '''J2''' starts conducting, but below breakover voltage '''J2''' offers very high resistance to the current and the SCR is said to be in the off state.


===Forward conduction mode=== ===Forward conduction mode===
SCR can be brought from blocking mode to conduction mode in two ways: either by increasing the voltage across anode to cathode beyond breakover voltage or by applying positive pulse at gate. Once SCR starts conducting, no more gate voltage is required to maintain it in the on state. There are two ways to turn it off: 1. Reduce the current through it below a minimal value called the holding current and 2. With the gate turned off, short out the anode and cathode momentarily with a push-button switch or transistor across the junction. An SCR can be brought from blocking mode to conduction mode in two ways: Either by increasing the voltage between anode and cathode beyond the breakover voltage, or by applying a positive pulse at the gate. Once the SCR starts conducting, no more gate voltage is required to maintain it in the '''ON''' state. The minimum current necessary to maintain the SCR in the '''ON''' state on removal of the gate voltage is called the latching current.
There are two ways to turn it '''off''':
# Reduce the current through it below a minimum value called the holding current, or
# With the gate turned '''off''', short-circuit the anode and cathode momentarily with a push-button switch or transistor across the junction.


=== Reverse blocking mode === === Reverse blocking mode ===
When a negative voltage is applied to the anode and a positive voltage to the cathode, the SCR is in reverse blocking mode, making J1 and J3 reverse biased and J2 forward biased. The device behaves as two diodes connected in series. A small leakage current flows. This is the reverse blocking mode. If the reverse voltage is increased, then at critical breakdown level, called the reverse breakdown voltage (V<sub>BR</sub>), an avalanche occurs at J1 and J3 and the reverse current increases rapidly.
SCRs are available with reverse blocking capability, which adds to the forward voltage drop because of the need to have a long, low-doped P1 region. (If one cannot determine which region is P1, a labeled diagram of layers and junctions can help). Usually, the reverse blocking voltage rating and forward blocking voltage rating are the same. The typical application for reverse blocking SCR is in current-source inverters. SCRs are available with reverse blocking capability, which adds to the forward voltage drop because of the need to have a long, low-doped P1 region. Usually, the reverse blocking voltage rating and forward blocking voltage rating are the same. The typical application for a reverse blocking SCR is in current-source inverters.


SCRs incapable of blocking reverse voltage are known as '''asymmetrical SCR''', abbreviated '''ASCR'''. They typically have a reverse breakdown rating in the tens of volts. ASCRs are used where either a reverse conducting diode is applied in parallel (for example, in voltage-source inverters) or where reverse voltage would never occur (for example, in switching power supplies or DC traction choppers). An SCR incapable of blocking reverse voltage is known as an '''asymmetrical SCR''', abbreviated '''ASCR'''. It typically has a reverse breakdown rating in the tens of volts. ASCRs are used where either a reverse conducting diode is applied in parallel (for example, in voltage-source inverters) or where reverse voltage would never occur (for example, in switching power supplies or DC traction choppers).


Asymmetrical SCRs can be fabricated with a reverse conducting diode in the same package. These are known as RCTs, for ]s. Asymmetrical SCRs can be fabricated with a reverse conducting diode in the same package. These are known as RCTs, for ].


== Thyristor turn-on methods == == Thyristor turn-on methods ==
Line 61: Line 57:
# gate triggering # gate triggering
# ''dv''/''dt'' triggering # ''dv''/''dt'' triggering
# temperature triggering #thermal triggering
# light triggering # light triggering


Forward-voltage triggering occurs when the anode–cathode forward voltage is increased with the gate circuit opened. This is known as avalanche breakdown, during which junction J2 will break down. At sufficient voltages, the thyristor changes to its on state with low voltage drop and large forward current. In this case, J1 and J3 are already forward-]. Forward-voltage triggering occurs when the anode–cathode forward voltage is increased with the gate circuit opened. This is known as avalanche breakdown, during which junction J2 will break down. At sufficient voltages, the thyristor changes to its on state with low voltage drop and large forward current. In this case, J1 and J3 are already forward-].


In order for gate triggering to occur, the thyristor should be in the forward blocking state where the applied voltage is less than the breakdown voltage, otherwise forward-voltage triggering may occur. A single small positive voltage pulse can then be applied between the gate and the cathode. This supplies a single gate current pulse that turns the thyristor onto its on state. In practice, this is the most common method used to trigger a thyristor.
== Application of SCRs ==

⚫ SCRs are mainly used in devices where the control of high power, possibly coupled with high voltage, is demanded. Their operation makes them suitable for use in medium- to high-voltage AC power control applications, such as lamp dimming, regulators and motor control.
Temperature triggering occurs when the width of depletion region decreases as the temperature is increased. When the SCR is near VPO a very small increase in temperature causes junction J2 to be removed which triggers the device.

== Simple SCR circuit ==
]
A simple SCR circuit can be illustrated using an AC voltage source connected to a SCR with a resistive load. Without an applied current pulse to the gate of the SCR, the SCR is left in its forward blocking state. This makes the start of conduction of the SCR controllable. The delay angle α, which is the instant the gate current pulse is applied with respect to the instant of natural conduction (ωt = 0), controls the start of conduction. Once the SCR conducts, the SCR does not turn off until the current through the SCR, i<sub>s</sub>, becomes negative. i<sub>s</sub> stays zero until another gate current pulse is applied and SCR once again begins conducting.<ref>{{Cite book|title=Power Electronics: A First Course|last=Mohan|first=Ned|publisher=Don Fowley|year=2012|isbn=978-1-118-07480-0|location=United States|pages=230–231}}</ref>

== Applications ==
⚫ SCRs are mainly used in devices where the control of high power, possibly coupled with high voltage, is demanded. Their operation makes them suitable for use in medium- to high-voltage AC power control applications, such as ], power regulators and motor control.

SCRs and similar devices are used for rectification of high-power AC in ] power transmission. They are also used in the control of welding machines, mainly ] and similar processes. It is used as an ] in various devices. ] machines made use of these to control lights, solenoids, and other functions electronically, instead of mechanically, hence the name solid-state.

Other applications include power switching circuits, controlled rectifiers, speed control of DC shunt motors, SCR crowbars, computer logic circuits, timing circuits, and inverters.


==Comparison with SCS==
SCRs and similar devices are used for rectification of high-power AC in ] power transmission.
⚫ A silicon-controlled switch (SCS) behaves nearly the same way as an SCR; but there are a few differences. Unlike an SCR, an SCS switches off when a positive voltage/input current is applied to another anode gate lead. Unlike an SCR, an SCS can be triggered into conduction when a negative voltage/output current is applied to that same lead.
They are also used in the control of welding machines, mainly MTAW (metal tungsten arc welding) and ] process.


⚫ SCSs are useful in practically all circuits that need a switch that turns on/off through two distinct control pulses. This includes power-switching circuits, logic circuits, lamp drivers, and counters.
==Compared to SCSs==
⚫ A silicon controlled switch (SCS) behaves nearly the same way as an SCR, aside from a few distinctions. Unlike an SCR, a SCS switches off when a positive voltage/input current is applied to another anode gate lead. Unlike an SCR, a SCS can also be triggered into conduction when a negative voltage/output current is applied to that same lead.
⚫ SCSs are useful in practically all circuits that need a switch that turns on/off through two distinct control pulses. This includes power-switching circuits, logic circuits, lamp drivers, counters, etc.


==Compared to TRIACs== ==Compared to TRIACs==
]s resemble SCRs in that they both act as electrically controlled switches. Unlike SCRs, TRIACS can pass current in either direction. Thus, TRIACs are particularly useful for AC applications. TRIACs have three leads: a gate lead and two conducting leads, referred to as MT1 and MT2. If no current/voltage is applied to the gate lead, the TRIAC switches off. On the other hand, if the trigger voltage is applied to the gate lead, the TRIAC switches on. A ] resembles an SCR in that both act as electrically controlled switches. Unlike an SCR, a TRIAC can pass current in either direction. Thus, TRIACs are particularly useful for AC applications. TRIACs have three leads: a gate lead and two conducting leads, referred to as MT1 and MT2. If no current/voltage is applied to the gate lead, the TRIAC switches off. On the other hand, if the trigger voltage is applied to the gate lead, the TRIAC switches on.


TRIACs are suitable for light-dimming circuits, phase-control circuits, AC power-switching circuits, AC motor control circuits, etc. TRIACs are suitable for light-dimming circuits, phase-control circuits, AC power-switching circuits, AC motor control circuits, etc.


=== See also === ==See also==
* ]
* ] * ]
* ] * ]
* ] * ]
* ] * ]
* ]
* ]
* ] * ]
* ] * ]
Line 96: Line 98:
* ] * ]


===References=== ==References==
{{Reflist}} {{Reflist}}


Line 104: Line 106:
* {{cite book |title=Power Electronics |author=K. B. Khanchandani}} * {{cite book |title=Power Electronics |author=K. B. Khanchandani}}


===External links=== ==External links==
* *
* *
Line 113: Line 115:
] ]
] ]
]
]
]
]
]


]
] ]

Latest revision as of 01:08, 19 November 2024

Four-layer solid-state current-controlling device
This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed.
Find sources: "Silicon controlled rectifier" – news · newspapers · books · scholar · JSTOR (December 2019) (Learn how and when to remove this message)
Silicon controlled rectifier
Silicon controlled rectifier
TypeActive
Working principle‍Ian M. Mackintosh (Bell Laboratories)
InventorGordon Hall and Frank W. "Bill" Gutzwiller
First production General Electric, 1957
Pin namesAnode, gate and cathode
Electronic symbol
SCR 4-layer (p-n-p-n) diagram

A silicon controlled rectifier or semiconductor controlled rectifier is a four-layer solid-state current-controlling device. The name "silicon controlled rectifier" is General Electric's trade name for a type of thyristor. The principle of four-layer p–n–p–n switching was developed by Moll, Tanenbaum, Goldey, and Holonyak of Bell Laboratories in 1956. The practical demonstration of silicon controlled switching and detailed theoretical behavior of a device in agreement with the experimental results was presented by Dr Ian M. Mackintosh of Bell Laboratories in January 1958. The SCR was developed by a team of power engineers led by Gordon Hall and commercialized by Frank W. "Bill" Gutzwiller in 1957.

Some sources define silicon-controlled rectifiers and thyristors as synonymous while other sources define silicon-controlled rectifiers as a proper subset of the set of thyristors; the latter being devices with at least four layers of alternating n- and p-type material. According to Bill Gutzwiller, the terms "SCR" and "controlled rectifier" were earlier, and "thyristor" was applied later, as usage of the device spread internationally.

SCRs are unidirectional devices (i.e. can conduct current only in one direction) as opposed to TRIACs, which are bidirectional (i.e. charge carriers can flow through them in either direction). SCRs can be triggered normally only by a positive current going into the gate as opposed to TRIACs, which can be triggered normally by either a positive or a negative current applied to its gate electrode.

Modes of operation

Characteristic curve of a silicon-controlled rectifier

There are three modes of operation for an SCR depending upon the biasing given to it:

  1. Forward blocking mode (off state)
  2. Forward conduction mode (on state)
  3. Reverse blocking mode (off state)

Forward blocking mode

In this mode of operation, the anode (+, p-doped side) is given a positive voltage while the cathode (−, n-doped side) is given a negative voltage, keeping the gate at zero (0) potential i.e. disconnected. In this case junction J1and J3 are forward-biased, while J2 is reverse-biased, allowing only a small leakage current from the anode to the cathode. When the applied voltage reaches the breakover value for J2, then J2 undergoes avalanche breakdown. At this breakover voltage J2 starts conducting, but below breakover voltage J2 offers very high resistance to the current and the SCR is said to be in the off state.

Forward conduction mode

An SCR can be brought from blocking mode to conduction mode in two ways: Either by increasing the voltage between anode and cathode beyond the breakover voltage, or by applying a positive pulse at the gate. Once the SCR starts conducting, no more gate voltage is required to maintain it in the ON state. The minimum current necessary to maintain the SCR in the ON state on removal of the gate voltage is called the latching current.

There are two ways to turn it off:

  1. Reduce the current through it below a minimum value called the holding current, or
  2. With the gate turned off, short-circuit the anode and cathode momentarily with a push-button switch or transistor across the junction.

Reverse blocking mode

When a negative voltage is applied to the anode and a positive voltage to the cathode, the SCR is in reverse blocking mode, making J1 and J3 reverse biased and J2 forward biased. The device behaves as two diodes connected in series. A small leakage current flows. This is the reverse blocking mode. If the reverse voltage is increased, then at critical breakdown level, called the reverse breakdown voltage (VBR), an avalanche occurs at J1 and J3 and the reverse current increases rapidly. SCRs are available with reverse blocking capability, which adds to the forward voltage drop because of the need to have a long, low-doped P1 region. Usually, the reverse blocking voltage rating and forward blocking voltage rating are the same. The typical application for a reverse blocking SCR is in current-source inverters.

An SCR incapable of blocking reverse voltage is known as an asymmetrical SCR, abbreviated ASCR. It typically has a reverse breakdown rating in the tens of volts. ASCRs are used where either a reverse conducting diode is applied in parallel (for example, in voltage-source inverters) or where reverse voltage would never occur (for example, in switching power supplies or DC traction choppers).

Asymmetrical SCRs can be fabricated with a reverse conducting diode in the same package. These are known as RCTs, for reverse conducting thyristors.

Thyristor turn-on methods

  1. forward-voltage triggering
  2. gate triggering
  3. dv/dt triggering
  4. thermal triggering
  5. light triggering

Forward-voltage triggering occurs when the anode–cathode forward voltage is increased with the gate circuit opened. This is known as avalanche breakdown, during which junction J2 will break down. At sufficient voltages, the thyristor changes to its on state with low voltage drop and large forward current. In this case, J1 and J3 are already forward-biased.

In order for gate triggering to occur, the thyristor should be in the forward blocking state where the applied voltage is less than the breakdown voltage, otherwise forward-voltage triggering may occur. A single small positive voltage pulse can then be applied between the gate and the cathode. This supplies a single gate current pulse that turns the thyristor onto its on state. In practice, this is the most common method used to trigger a thyristor.

Temperature triggering occurs when the width of depletion region decreases as the temperature is increased. When the SCR is near VPO a very small increase in temperature causes junction J2 to be removed which triggers the device.

Simple SCR circuit

A simple SCR circuit with a resistive load

A simple SCR circuit can be illustrated using an AC voltage source connected to a SCR with a resistive load. Without an applied current pulse to the gate of the SCR, the SCR is left in its forward blocking state. This makes the start of conduction of the SCR controllable. The delay angle α, which is the instant the gate current pulse is applied with respect to the instant of natural conduction (ωt = 0), controls the start of conduction. Once the SCR conducts, the SCR does not turn off until the current through the SCR, is, becomes negative. is stays zero until another gate current pulse is applied and SCR once again begins conducting.

Applications

SCRs are mainly used in devices where the control of high power, possibly coupled with high voltage, is demanded. Their operation makes them suitable for use in medium- to high-voltage AC power control applications, such as lamp dimming, power regulators and motor control.

SCRs and similar devices are used for rectification of high-power AC in high-voltage direct current power transmission. They are also used in the control of welding machines, mainly gas tungsten arc welding and similar processes. It is used as an electronic switch in various devices. Early solid-state pinball machines made use of these to control lights, solenoids, and other functions electronically, instead of mechanically, hence the name solid-state.

Other applications include power switching circuits, controlled rectifiers, speed control of DC shunt motors, SCR crowbars, computer logic circuits, timing circuits, and inverters.

Comparison with SCS

A silicon-controlled switch (SCS) behaves nearly the same way as an SCR; but there are a few differences. Unlike an SCR, an SCS switches off when a positive voltage/input current is applied to another anode gate lead. Unlike an SCR, an SCS can be triggered into conduction when a negative voltage/output current is applied to that same lead.

SCSs are useful in practically all circuits that need a switch that turns on/off through two distinct control pulses. This includes power-switching circuits, logic circuits, lamp drivers, and counters.

Compared to TRIACs

A TRIAC resembles an SCR in that both act as electrically controlled switches. Unlike an SCR, a TRIAC can pass current in either direction. Thus, TRIACs are particularly useful for AC applications. TRIACs have three leads: a gate lead and two conducting leads, referred to as MT1 and MT2. If no current/voltage is applied to the gate lead, the TRIAC switches off. On the other hand, if the trigger voltage is applied to the gate lead, the TRIAC switches on.

TRIACs are suitable for light-dimming circuits, phase-control circuits, AC power-switching circuits, AC motor control circuits, etc.

See also

References

  1. Moll, J.; Tanenbaum, M.; Goldey, J.; Holonyak, N. (September 1956). "P-N-P-N Transistor Switches". Proceedings of the IRE. 44 (9): 1174–1182. doi:10.1109/jrproc.1956.275172. ISSN 0096-8390. S2CID 51673404.
  2. Vasseur, J. P. (2016-06-06). Properties and Applications of Transistors. Elsevier. ISBN 9781483138886.
  3. Twist, Jo (2005-04-18). "Law that has driven digital life". BBC News. Retrieved 2018-07-27.
  4. Ward, Jack. "The Early History of the Silicon Controlled Rectifier". p. 6. Retrieved 12 April 2014.
  5. "Semiconductors: Thyristors and more". Edison Tech Center.
  6. "SCR is 50 Years Old" (PDF). IEEE Industry Applications Magazine.
  7. Mungenast, J. E. "The SCR Revolution". RF Cafe. General Electric Co.
  8. Christiansen, Donald; Alexander, Charles; Jurgen, Ronald (2005). Standard Handbook of Electronic Engineering, 5th Edition. Mcgraw-hill. ISBN 9780071384216.
  9. International Electrotechnical Commission 60747-6 standard
  10. Dorf, Richard C. (1997-09-26). The Electrical Engineering Handbook, Second Edition. CRC Press. ISBN 9781420049763.
  11. Ward, Jack. "The Early History of the Silicon Controlled Rectifier". p. 7. Retrieved 12 April 2014.
  12. Mohan, Ned (2012). Power Electronics: A First Course. United States: Don Fowley. pp. 230–231. ISBN 978-1-118-07480-0.

Further reading

External links

Electronic components
Semiconductor
devices
MOS
transistors
Other
transistors
Diodes
Other
devices
Voltage regulators
Vacuum tubes
Vacuum tubes (RF)
Cathode-ray tubes
Gas-filled tubes
Adjustable
Passive
Reactive
Categories: