Misplaced Pages

Revision as of 23:59, 11 December 2014

This article may be too technical for most readers to understand. Please help improve it to make it understandable to non-experts, without removing the technical details. (April 2014) (Learn how and when to remove this message)

Wireless power or wireless energy transmission is the transmission of electrical energy from a power source to an electrical load without synthetic conductors. Wireless transmission is useful in cases where interconnecting wires are inconvenient, hazardous, or impossible. The problem of wireless power transmission differs from that of wireless telecommunications, such as radio. In the latter, the proportion of energy received becomes critical only if it is too low for the signal to be distinguished from the background noise. With wireless power, efficiency is a more significant parameter, enough energy sent out by the transmitter must arrive at the receiver or receivers to make the system economical.

The most common form of wireless power transmission is carried out using direct induction followed by resonant magnetic induction. Other methods under consideration are electromagnetic radiation in the form of microwaves or lasers and electrical conduction through natural media.

Wireless power is used in electric toothbrushes, RFID tags, medical implants and some vehicles, including maglev trains.

Electric energy transfer

An electric current flowing through a conductor, such as a wire, carries electrical energy. When an electric current passes through a circuit there is an electric field in the dielectric surrounding the conductor; magnetic field lines around the conductor and lines of electric force radially about the conductor.

In a direct current circuit, if the current is continuous, the fields are constant; there is a condition of stress in the space surrounding the conductor, which represents stored electric and magnetic energy, just as a compressed spring or a moving mass represents stored energy. In an alternating current circuit, however, the fields also alternate; that is, with every half wave of current and of voltage, the magnetic and the electric field start at the conductor and run outwards into space with the speed of light. Where these alternating fields impinge on another conductor a voltage and a current are induced. respectively in any dielectric substance, a field of charges is enforced, with a current in relaxation.

Any change in the electrical conditions of the circuit, whether internal or external involves a readjustment of the stored magnetic and electric field energy of the circuit, that is, a so-called transient. A transient is of the general character of a condenser discharge through an inductive circuit. The phenomenon of the condenser discharge through an inductive circuit therefore is of the greatest importance to the engineer, as the foremost cause of high-voltage and high-frequency troubles in electric circuits.

Electromagnetic induction is proportional to the intensity of the current and voltage in the conductor which produces the fields and to the frequency. The higher the frequency the more intense the inductive effect. Energy is transferred from a conductor that produces the fields (the primary) to any conductor on which the fields impinge (the secondary). Part of the energy of the primary conductor passes inductively across space into secondary conductor and the energy decreases rapidly along the primary conductor. A high frequency current does not pass for long distances along a conductor but rapidly transfers its energy by induction to adjacent conductors. Higher induction resulting from the higher frequency is the explanation of the apparent difference in the propagation of high frequency disturbances from the propagation of the low frequency power of alternating current systems. The higher the frequency the more preponderant become the inductive effects that transfer energy from circuit to circuit across space. The more rapidly the energy decreases and the current dies out along the circuit, the more local is the phenomenon.

The flow of electric energy thus comprises phenomena inside the conductor and phenomena in the space outside the conductor—the electric field—which, in a continuous current circuit, is a condition of steady magnetic and dielectric stress, and in an alternating current circuit is alternating, that is, an electric wave launched by the conductor to become far-field electromagnetic radiation traveling through space with the speed of light.

In electric power transmission and distribution, the phenomena inside the conductor are of main importance, and the electric field of the conductor is usually observed only incidentally. Inversely, in the use of electric power for radio telecommunications it is only the electric and magnetic fields outside of the conductor, that is far-field electromagnetic radiation, which is of importance in transmitting the message. The phenomenon in the conductor, the current in the launching structure, is not used.

The electric charge displacement in the conductor produces a magnetic field and resultant lines of electric force. The magnetic field is a maximum in the direction concentric, or approximately so, to the conductor. That is, a ferromagnetic body tends to set itself in a direction at right angles to the conductor. The electric field has a maximum in a direction radial, or approximately so, to the conductor. The electric field component tends in a direction radial to the conductor and dielectric bodies may be attracted or repelled radially to the conductor.

The electric field of a circuit over which energy flows has three main axes at right angles with each other:

1. The magnetic field, concentric with the conductor.
2. The lines of electric force, radial to the conductor.
3. The power gradient, parallel to the conductor.

Where the electric circuit consists of several conductors, the electric fields of the conductors superimpose upon each other, and the resultant magnetic field lines and lines of electric force are not concentric and radial respectively, except approximately in the immediate neighborhood of the conductor. Between parallel conductors they are conjugate of circles. Neither the power consumption in the conductor, nor the magnetic field, nor the electric field, are proportional to the flow of energy through the circuit. However, the product of the intensity of the magnetic field and the intensity of the electric field is proportional to the flow of energy or the power, and the power is therefore resolved into a product of the two components i and e, which are chosen proportional respectively to the intensity of the magnetic field and of the electric field. The component called the current is defined as that factor of the electric power which is proportional to the magnetic field, and the other component, called the voltage, is defined as that factor of the electric power which is proportional to the electric field.

In radio telecommunications the electric field of the transmit antenna propagates through space as a radio wave and impinges upon the receive antenna where it is observed by its magnetic and electric effect. Radio waves, microwaves, infrared radiation, visible light, ultraviolet radiation, X rays and gamma rays are shown to be the same electromagnetic radiation phenomenon, differing one from the other only in frequency of vibration.

Electromagnetic induction

Energy transfer by electromagnetic induction is typically magnetic but capacitive coupling can also be achieved.

Electrodynamic induction method

The electrodynamic induction wireless transmission technique is near field over distances up to about one-sixth of the wavelength used. Near field energy itself is non-radiative but some radiative losses do occur. In addition there are usually resistive losses. With electrodynamic induction, electric current flowing through a primary coil creates a magnetic field that acts on a secondary coil producing a current within it. Coupling must be tight in order to achieve high efficiency. As the distance from the primary is increased, more and more of the magnetic field misses the secondary. Even over a relatively short range the inductive coupling is grossly inefficient, wasting much of the transmitted energy.

This action of an electrical transformer is the simplest form of wireless power transmission. The primary and secondary circuits of a transformer are not directly connected. Energy transfer takes place through a process known as mutual induction. Principal functions are stepping the primary voltage either up or down and electrical isolation. Mobile phone and electric toothbrush battery chargers, and electrical power distribution transformers are examples of how this principle is used. Induction cookers use this method. The main drawback to this basic form of wireless transmission is short range. The receiver must be directly adjacent to the transmitter or induction unit in order to efficiently couple with it.

The application of resonance increases the transmission range somewhat. When resonant coupling is used, the transmitter and receiver inductors are tuned to the same natural frequency. Performance can be further improved by modifying the drive current from a sinusoidal to a nonsinusoidal transient waveform. In this way significant power may be transmitted between two mutually-attuned LC circuits having a relatively low coefficient of coupling. Transmitting and receiving coils are usually single layer solenoids or flat spirals with parallel capacitors, which, in combination, allow the receiving element to be tuned to the transmitter frequency.

Common uses of resonance-enhanced electrodynamic induction are charging the batteries of portable devices such as laptop computers and cell phones, medical implants and electric vehicles. A localized charging technique selects the appropriate transmitting coil in a multilayer winding array structure. Resonance is used in both the wireless charging pad (the transmitter circuit) and the receiver module (embedded in the load) to maximize energy transfer efficiency. This approach is suitable for universal wireless charging pads for portable electronics such as mobile phones. It has been adopted as part of the Qi wireless charging standard.

It is also used for powering devices having no batteries, such as RFID patches and contactless smartcards, and to couple electrical energy from the primary inductor to the helical resonator of Tesla coil wireless power transmitters and from the helical resonator to the secondary inductor of Tesla coil wireless power receiving transformers.

Electrostatic induction method

Electrostatic induction or capacitive coupling is the passage of electrical energy through a dielectric. In practice it is an electric field gradient or differential capacitance between two or more insulated terminals, plates, electrodes, or nodes that are elevated over a conducting ground plane. The electric field is created by charging the plates with a high potential, high frequency alternating current power supply. The capacitance between two elevated terminals and a powered device form a voltage divider.

The electric energy transmitted by means of electrostatic induction can be utilized by a receiving device, such as a wireless lamp. Nikola Tesla demonstrated the illumination of wireless lamps by energy that was coupled to them through an alternating electric field.

The electrostatic induction is applicable to the electrical conduction wireless transmission method.

Electromagnetic radiation

Far field methods achieve longer ranges, often multiple kilometer ranges, where the distance is much greater than the diameter of the device(s). The main reason for longer ranges with radio wave and optical devices is the fact that electromagnetic radiation in the far-field can be made to match the shape of the receiving area (using high directivity antennas or well-collimated laser beam) thereby delivering almost all emitted power at long ranges. The maximum directivity for antennas is physically limited by diffraction.

Beamed power, size, distance, and efficiency

The dimensions of the components may be dictated by the distance from transmitter to receiver, the wavelength and the Rayleigh criterion or diffraction limit, used in standard radio frequency antenna design, which also applies to lasers. In addition to the Rayleigh criterion Airy's diffraction limit is also frequently used to determine an approximate spot size at an arbitrary distance from the aperture.

The Rayleigh criterion dictates that any radio wave, microwave or laser beam will spread and become weaker and diffuse over distance; the larger the transmitter antenna or laser aperture compared to the wavelength of radiation, the tighter the beam and the less it will spread as a function of distance (and vice versa). Smaller antennae also suffer from excessive losses due to side lobes. However, the concept of laser aperture considerably differs from an antenna. Typically, a laser aperture much larger than the wavelength induces multi-moded radiation and mostly collimators are used before emitted radiation couples into a fiber or into space.

Ultimately, beamwidth is physically determined by diffraction due to the dish size in relation to the wavelength of the electromagnetic radiation used to make the beam. Microwave power beaming can be more efficient than lasers, and is less prone to atmospheric attenuation caused by dust or water vapor losing atmosphere to vaporize the water in contact.

Then the power levels are calculated by combining the above parameters together, and adding in the gains and losses due to the antenna characteristics and the transparency and dispersion of the medium through which the radiation passes. That process is known as calculating a link budget.

Microwave method

Power transmission via radio waves can be made more directional, allowing longer distance power beaming, with shorter wavelengths of electromagnetic radiation, typically in the microwave range. A rectenna may be used to convert the microwave energy back into electricity. Rectenna conversion efficiencies exceeding 95% have been realized. Power beaming using microwaves has been proposed for the transmission of energy from orbiting solar power satellites to Earth and the beaming of power to spacecraft leaving orbit has been considered.

Power beaming by microwaves has the difficulty that for most space applications the required aperture sizes are very large due to diffraction limiting antenna directionality. For example, the 1978 NASA Study of solar power satellites required a 1-km diameter transmitting antenna, and a 10 km diameter receiving rectenna, for a microwave beam at 2.45 GHz. These sizes can be somewhat decreased by using shorter wavelengths, although short wavelengths may have difficulties with atmospheric absorption and beam blockage by rain or water droplets. Because of the "thinned array curse," it is not possible to make a narrower beam by combining the beams of several smaller satellites.

For earthbound applications a large area 10 km diameter receiving array allows large total power levels to be used while operating at the low power density suggested for human electromagnetic exposure safety. A human safe power density of 1 mW/cm distributed across a 10 km diameter area corresponds to 750 megawatts total power level. This is the power level found in many modern electric power plants.

Following World War II, which saw the development of high-power microwave emitters known as cavity magnetrons, the idea of using microwaves to transmit power was researched. By 1964, a miniature helicopter propelled by microwave power had been demonstrated.

Japanese researcher Hidetsugu Yagi also investigated wireless energy transmission using a directional array antenna that he designed. In February 1926, Yagi and his colleague Shintaro Uda published their first paper on the tuned high-gain directional array now known as the Yagi antenna. While it did not prove to be particularly useful for power transmission, this beam antenna has been widely adopted throughout the broadcasting and wireless telecommunications industries due to its excellent performance characteristics.

Wireless high power transmission using microwaves is well proven. Experiments in the tens of kilowatts have been performed at Goldstone in California in 1975 and more recently (1997) at Grand Bassin on Reunion Island. These methods achieve distances on the order of a kilometer.

Under experimental conditions microwave conversion efficiency was measured to be around 54%.

More recently a change to 24 GHz has been suggested as microwave emitters similar to LEDs have been made with very high quantum efficiencies using negative resistance i.e. Gunn or IMPATT diodes and this would be viable for short range links.

Laser method

In the case of electromagnetic radiation closer to the visible region of the spectrum (tens of micrometers to tens of nanometres), power can be transmitted by converting electricity into a laser beam that is then pointed at a photovoltaic cell. This mechanism is generally known as "power beaming" because the power is beamed at a receiver that can convert it to electrical energy.

Compared to other wireless methods:

• Collimated monochromatic wavefront propagation allows narrow beam cross-section area for transmission over large distances.
• Compact size: solid state lasers fit into small products.
• No radio-frequency interference to existing radio communication such as Wi-Fi and cell phones.
• Access control: only receivers hit by the laser receive power.

Drawbacks include:

• Laser radiation is hazardous. Low power levels can blind humans and other animals. High power levels can kill through localized spot heating.
• Conversion between electricity and light is inefficient. Photovoltaic cells achieve only 40%–50% efficiency. (Efficiency is higher with monochromatic light than with solar panels).
• Atmospheric absorption, and absorption and scattering by clouds, fog, rain, etc., causes up to 100% losses.
• Requires a direct line of sight with the target.

Laser "powerbeaming" technology has been mostly explored in military weapons and aerospace applications and is now being developed for commercial and consumer electronics. Wireless energy transfer systems using lasers for consumer space have to satisfy laser safety requirements standardized under IEC 60825.

Other details include propagation, and the coherence and the range limitation problem.

Geoffrey Landis is one of the pioneers of solar power satellites and laser-based transfer of energy especially for space and lunar missions. The demand for safe and frequent space missions has resulted in proposals for a laser-powered space elevator.

NASA's Dryden Flight Research Center demonstrated a lightweight unmanned model plane powered by a laser beam. This proof-of-concept demonstrates the feasibility of periodic recharging using the laser beam system.

Magnetodynamic coupling

Any permanent magnet which is exposed to an external magnetic field will be subject to a force which, as well as moving the permanent magnet, acts to align the magnetic field in the permanent magnet with the field of the external force. This is described by the equation for force on a dipole as magnetic torque. If the allowed motion of the permanent magnet is restricted, such as a magnet restricted to motion along an axis and magnetized along that axis, then a degree of motion and rotation will be allowed within limits. If the external magnetic field is time-varying then the permanent magnet will move within its allowed range of motion. In the example of a magnet restricted to a single axis, producing an alternating magnetic field along this axis will cause the permanent magnet to travel backward and forward on the axis. If a coil is placed near this permanent magnet, the change in magnetic flux will induce an electromotive force in the coil according to Faraday's law of induction, to which a load may be connected in order to cause current flow, using the same principle as an alternator. The external field in a magnetically-coupled system may also be the field produced by a permanent magnet. Here the field produced by this magnet is approximated as a magnetic dipole with some magnetization, m, aligned in a given direction. For the second magnet which is allowed to move freely, there will be a force of attraction and a force acting to rotate the magnet.

In the case of two magnets which are restricted to rotate around parallel axes, when the first magnet is rotated a torque will be produced on the second magnet causing it to align with the first magnet. This can be described similarly to a system of gears, where the magnets are essentially two meshed gears with a 1:1 ratio. As the first magnet continues to rotate, the second magnet will also rotate synchronously. In this kind of a system, the power used to rotate the first magnet can be extracted as electrical energy through the coils surrounding the second magnet. The amount of power transferred across the gap between magnets is a function of the torque, which is a function of magnetic moment, and the rotating frequency of the magnets. In this way, electrical power may be transferred across an air gap at high efficiency, equivalent to or greater than that of a resonant inductively coupled system, and has been demonstrated previously at the kW scale over short distances

Electrical Conduction

A wireless method by means of concatenated tuned circuits was proposed as early as 1904.  It depends upon resonant inductive coupling, the electrical conductivity of earth, capacitive coupling, and the electrical conductivity of plasma.  Energy transmission is achieved by charging and discharging the elevated terminal capacitance of a grounded resonance transformer electrical oscillator transmitter, generating an alternating electric field.  This electric field can couple with a similarly designed grounded resonance transformer electrical energy receiver tuned to the same frequency.  Electrical energy is transferred between the transmitter and receiver by electrical conduction between the ground terminal electrodes when this coupling is established.  In this way electric lamps can be lit and electric motors turned at mid-range distances. The transmitted energy can be detected at much greater distances.  This form of wireless transmission, in which alternating current electricity passes through the earth with an equivalent electrical displacement through the air above it, was demonstrated in 2008 over distances up to 12 meters, achieving power transmission efficiencies superior to the resonant electrical induction method.

According to theory, the electrical energy passes through the earth, and through the troposphere and stratosphere.  Terrestrial current flow is induced by capacitive coupling in the region up to an elevation of approximately 5 miles (8.0 km) above Earth's surface.  With sufficient transmitter power output, electrical conduction and the flow of current through the upper atmospheric strata starting at a barometric pressure of approximately 130 millimeters of mercury or 7.9 miles (12.7 km) is made possible by the creation of capacitively coupled discharge plasma through the process of atmospheric ionization.

Theory further states that the periodic charging and discharging the resonance transformer transmitter's elevated terminal capacitance periodically alters Earth's electrostatic charge  This redistribution of charge results in the passage of electric current through the ground along with an accompanying guided surface wave.  With sufficient transmitter power output, the electrostatic potential is disturbed over Earth's entire surface.  Upon reaching the earth antipode relative to the resonance transformer transmitter, reflection of the guided surface wave takes place.  This results in the establishment of a terrestrial standing wave pattern across Earth's surface.  The fundamental earth resonance frequency is approximately 11.78 Hz.  A higher harmonic of this fundamental frequency is used.

"The frequency should be smaller than twenty thousand per second, though shorter waves might be practicable"

History

In 1862 James Clerk Maxwell derived Maxwell's equations, the basis for modern electromagnetics including wireless power. In 1884 John Henry Poynting developed equations for the flow of power in an electromagnetic field, Poynting's theorem and the Poynting vector, which are used in wireless power.

Tesla's experiments

Serbian-American inventor Nikola Tesla performed the first experiments in wireless power transmission at the turn of the 20th century, and may have done more to popularize the idea than any other individual. In the period 1891 to 1904 he experimented with spark-excited radio frequency resonant transformers, now called Tesla coils, which generated high AC voltages on elevated capacitive terminals. With these he was able to transmit power for short distances without wires. In demonstrations before the American Institute of Electrical Engineers and at the 1893 Columbian Exposition in Chicago he lit light bulbs from across a stage. He found he could increase the distance by using a receiving LC circuit tuned to resonance with the transmitter's LC circuit. At his Colorado Springs laboratory during 1899-1900, by using voltages of the order of 20 megavolts generated by an enormous coil, he was able to light incandescent lamps at a distance of around 150 feet (46 meters). Coupling between resonant circuits by electric or magnetic fields is now a familiar technology used throughout electronics, and is currently of interest again as a means of short-range wireless power transmission. It is a "near-field" effect, meaning that the energy transferred falls with the fifth power of the distance between transmitter and receiver, so it is not able to transmit power over long distances.

However Tesla claimed to be able to transmit power on a worldwide scale, using a method that involved conduction through the Earth and atmosphere. In 1901 he began construction of a large high-voltage coil facility, the Wardenclyffe Tower at Shoreham, New York, intended as a prototype transmitter for a "World Wireless System" that was to transmit power worldwide, but he lost funding by 1904 and the facility was never completed. Although Tesla claimed his ideas were proven, he had a history of failing to confirm his ideas by experiment, and there seems to be no evidence that he ever transmitted significant power beyond the short-range demonstrations above, perhaps one hundred yards. The only report of long-distance transmission by Tesla is a claim, not found in reliable sources, that in 1899 he wirelessly lit 200 light bulbs at a distance of 23 miles (40 km). There is no independent confirmation of this putative demonstration; Tesla did not mention it, and it does not appear in his meticulous laboratory notes. It originated in 1944 from Tesla's first biographer, John J. O'Neill, who said he pieced it together from "fragmentary material... in a number of publications". In the 110 years since Tesla's experiments, efforts using similar equipment have failed to achieve long distance power transmission, and the scientific consensus is his World Wireless system would not have worked. Tesla's world power transmission scheme remains today what it was in Tesla's time, a fascinating dream.

For the next 50 years little progress was made in wireless power transmission. Radio was developed for communication uses, but couldn't be used for power transmission due to the fact that the low frequency radio waves used spread out in all directions and so little energy reaches a distant receiver. Transmitters were lacking that could generate the high frequency waves that could be focused in narrow beams on a receiver.

Microwaves

The development of microwave technology during World War 2, such as the klystron and magnetron tubes and parabolic antennas made radiative (far-field) methods practical for the first time, and the first long-distance wireless power transmission was achieved in the 1960s by William C. Brown. In 1964 Brown invented the rectenna which could efficiently convert microwaves to DC power, and in 1964 demonstrated it with the first wireless-powered aircraft, a model helicopter powered by microwaves beamed from the ground. A major motivation for microwave research in the 1970s and 80s was to develop a solar power satellite. Conceived in 1968 by Peter Glaser, this would harvest energy from sunlight using solar cells and beam it down to Earth as microwaves to huge rectennas, which would convert it to electrical energy on the electric power grid. In landmark 1975 high power experiments, Brown demonstrated short range transmission of 475 W of microwaves at 54% DC to DC efficiency, and he and Robert Dickinson at NASA's Jet Propulsion Laboratory transmitted 30 kW DC output power across 1.5 km with 2.38 GHz microwaves from a 26 m dish to a 7.3 x 3.5 m rectenna array. The incident-RF to DC conversion efficiency of the rectenna was 80%. In 1983 Japan launched MINIX (Microwave Ionosphere Nonlinear Interation Experiment), a rocket experiment to test transmission of high power microwaves through the ionosphere.

In recent years a focus of research has been the development of wireless-powered drone aircraft, which began in 1959 with the Dept. of Defense's RAMP (Raytheon Airborne Microwave Platform) project which sponsored Brown's research. In 1987 Canada's Communications Research Center developed a small prototype airplane called Stationary High Altitude Relay Platform (SHARP) to relay telecommunication data between points on earth similar to a communication satellite. Powered by a rectenna, it could fly at 13 miles (21 km) altitude and stay aloft for months. In 1992 a team at Kyoto University built a more advanced craft called MILAX (MIcrowave Lifted Airplane eXperiment). In 2003 NASA flew the first laser powered aircraft. The small model plane's motor was powered by electricity generated by photocells from a beam of infrared light from a ground based laser, while a control system kept the laser pointed at the plane.

Near-field technologies

Inductive power transfer between nearby coils of wire is an old technology, existing since the transformer was developed in the 1800s. Induction heating has been used for 100 years. With the advent of cordless appliances, inductive charging stands were developed for appliances used in wet environments like electric toothbrushes and electric razors to reduce the hazard of electric shock.

One field to which inductive transfer has been applied is to power electric vehicles. In 1892 Maurice Hutin and Maurice Leblanc patented a wireless method of powering railroad trains using resonant coils inductively coupled to a track wire at 3 kHz. The first passive RFID (Radio Frequency Identification) technologies were invented by Mario Cardullo (1973) and Koelle et al (1975) and by the 1990s were being used in proximity cards and contactless smartcards.

The proliferation of portable wireless communication devices such as cellphones, tablet, and laptop computers in recent decades is currently driving the development of wireless powering and charging technology to eliminate the need for these devices to be tethered to wall plugs during charging. The Wireless Power Consortium was established in 2008 to develop interoperable standards across manufacturers. It's Qi inductive power standard published in August 2009 enables charging and powering of portable devices of up to 5 watts over distances of 4 cm (1.6 inches). The wireless device is placed on a flat charger plate (which could be embedded in table tops at cafes, for example) and power is transferred from a flat coil in the charger to a similar one in the device.

A recent breakthrough was the 2007 rediscovery of resonant power transfer pioneered by Tesla and its use to extend inductive transfer from short to mid ranges. In 2007 a team led by Marin Soljačić at MIT used coupled tuned circuits made of a 25 cm self-resonant coil at 10 MHz to transfer 60 W of power over a distance of 2 meters (8 times the coil diameter) at around 40% efficiency. This technology is being commercialized as WiTricity.

Timeline of wireless power

• 1826: André-Marie Ampère develops Ampère's circuital law showing that electric current produces a magnetic field.
• 1831: Michael Faraday develops Faraday's law of induction describing the electromagnetic force induced in a conductor by a time-varying magnetic flux.
• 1836: Nicholas Callan invents the electrical transformer, also known as the induction coil.
• 1865: James Clerk Maxwell synthesizes the previous observations, experiments and equations of electricity, magnetism and optics into a consistent theory and mathematically models the behavior of electromagnetic radiation in a set of partial differential equations known as Maxwell's equations.
• 1872: American inventors Mahlon Loomis and William Henry Ward receive U.S. patents for wireless systems based upon the idea terrestrial and atmospheric conductivity.
• 1888: Heinrich Rudolf Hertz confirms the existence of electromagnetic radiation. Hertz’s "apparatus for generating electromagnetic waves" was a VHF or UHF "radio wave" spark gap transmitter.
• 1891: Tesla demonstrates wireless energy transmission by means of electrostatic induction using a high-tension induction coil before the American Institute of Electrical Engineers at Columbia College.
• 1893: Tesla demonstrates the wireless illumination of phosphorescent lamps of his design at the World's Columbian Exposition in Chicago.
• 1893: Tesla demonstrates wireless energy transmission before a meeting of the National Electric Light Association in St. Louisusing a grounded resonance transformer transmitter and a grounded resonance transformer receiver.
• 1894: Tesla lights incandescent lamps wirelessly at the 35 South Fifth Avenue laboratory in New York City by means of "electro-dynamic induction" or resonant inductive coupling.
• 1894: Hutin & LeBlanc, espouse long held view that inductive energy transfer should be possible, they received U.S. patent 527,857 describing a system for power transmission at 3 kHz.
• 1894: British physicist Sir Oliver Lodge delivers a memorial lecture on Hertz where he demonstrates the properties of "Hertzian waves" (radio waves), including transmitting them over a short distance, using an improved version of Branly's filing tube, which Lodge has named the "coherer", as a detector. He also demonstrates controlling frequency by changing inductance and capacitance in his circuits.
• 1895: Marconi demonstrates radio wave transmission over a distance of about 2 miles (3.2 km)
• 1897: Tesla demonstrates wireless energy transmission over a distance of about 48 kilometres (30 mi).>  Files his first patent applications dealing specifically with wireless transmission.
• 1897: Tesla demonstrates wireless energy transmission over a distance of about 48 kilometres (30 mi).  Files his first patent applications dealing specifically with wireless transmission.
• 1899: Tesla shifts wireless power transmission research to Colorado Springs and writes, "the inferiority of the induction method would appear immense as compared with the disturbed charge of ground and air method."
• 1900: Tesla receives patents APPARATUS FOR TRANSMISSION OF ELECTRICAL ENERGY and SYSTEM OF TRANSMISSION OF ELECTRICAL ENERGY.
• 1901: Tesla begins construction of the Wardenclyffe power plant and tower, a wireless signal and power transmitter in Shoreham, New York based on his ideas of ground and atmospheric electrical conductivity. He runs out of money before the project can be completed, with investors opting to invest in Marconi's radio system.
• 1901: Marconi achieves the first trans-Atlantic radio transmission.
• 1904: At the St. Louis World's Fair, a prize is offered for a successful attempt to drive a 0.1 horsepower (75 W) airship motor by energy transmitted through space at a distance of at least 100 feet (30 m).
• 1914: Tesla receives patent APPARATUS FOR TRANSMITTING ELECTRICAL ENERGY, Jan. 18, 1902, U.S. Patent 1,119,732, Dec. 1, 1914.
• 1916: Tesla states, "In my system, you should free yourself of the idea that there is radiation, that energy is radiated. It is not radiated; it is conserved."
• 1917: The Wardenclyffe tower is demolished . . . .
• 1926: Shintaro Uda and Hidetsugu Yagi publish their first paper on Uda's "tuned high-gain directional array" better known as the Yagi antenna.
• 1940: John Randall and Harry Boot Working at the University of Birmingham in the United Kingdom, develop a practical cavity magnetron.
• 1961: William C. Brown publishes an article exploring possibilities of microwave power transmission.
• 1968: Peter Glaser proposes wirelessly transmitting solar energy captured in space using "Powerbeaming" technology. This is usually recognized as the first description of a solar power satellite.
• 1973: The world's first passive RFID system is demonstrated at Los-Alamos National Lab.
• 1975: Goldstone Deep Space Communications Complex does experiments in the tens of kilowatts.
• 1998: RFID tags are powered by electrodynamic induction over a few feet.
• 1999: Prof. Shu Yuen (Ron) Hui and Mr. S.C. Tang file a patent on "Coreless Printed-Circuit-Board (PCB) transformers and operating techniques", which form the basis for future planar charging surface with "vertical flux" leaving the planar surface. The circuit uses resonant circuits for wireless power transfer. EP(GB)0935263B
• 2000: Prof. Shu Yuen (Ron) Hui invent a planar wireless charging pad using the "vertical flux" approach and resonant power transfer for charging portable consumer electronic products. A patent is filed on "Apparatus and method of an inductive battery charger,” PCT Patent PCT/AU03/00 721, 2000.
• 2001: Prof. Shu Yuen (Ron) Hui and Dr. S.C. Tang file a patent on "Planar Printed-Circuit-Board Transformers with Effective Electromagnetic Interference (EMI) Shielding". The EM shield consists of a thin layer of ferrite and a thin layer of copper sheet. It enables the underneath of the future wireless charging pads to be shielded with a thin EM shield structure with thickness of typically 0.7mm or less. U.S. patent 6,501,364.
• 2001: Prof. Ron Hui's team demonstrate that the coreless PCB transformer can transmit power close to 100W in ‘A low-profile low-power converter with coreless PCB isolation transformer, IEEE Transactions on Power Electronics, Volume: 16 Issue: 3 , May 2001. A team of Philips Research Center Aachen, led by Dr. Eberhard Waffenschmidt, use it to power an 100W lighting device in their paper "Size advantage of coreless transformers in the MHz range" in the European Power Electronics Conference in Graz.
• 2002: Prof. Shu Yuen (Ron) Hui extends the planar wireless charging pad concept using the vertical flux approach to incorporate free-positioning feature for multiple loads. This is achieved by using a multilayer planar winding array structure. Patent were granted as "Planar Inductive Battery Charger", GB2389720 and GB 2389767.
• 2005: Prof. Shu Yuen (Ron) Hui and Dr. W.C. Ho publish their work in the IEEE Transactions on a planar wireless charging platform with free-positioning feature. The planar wireless charging pad is able to charge several loads simultaneously on a flat surface.
• 2007: A localized charging technique is reported by Dr. Xun Liu and Prof. Ron Hui for the wireless charging pad with free-positioning feature. With the aid of the double-layer EM shields enclosing the transmitter and receiver coils, the localized charging selects the right transmitter coil so as to minimize flux leakage and human exposure to radiation.
• 2007: Using electrodynamic induction the WiTricity physics research group, led by Prof. Marin Soljacic at MIT, wirelessly power a 60W light bulb with 40% efficiency at a 2 metres (6.6 ft) distance with two 60 cm-diameter coils.
• 2008: Bombardier offers a new wireless power transmission product PRIMOVE, a system for use on trams and light-rail vehicles.
• 2008: Intel reproduces the original 1894 implementation of electrodynamic induction and Prof. John Boys group's 1988 follow-up experiments by wirelessly powering a nearby light bulb with 75% efficiency.
• 2008: Greg Leyh and Mike Kennan of the Nevada Lightning Laboratory achieve wireless power transmission by coupled electric fields between two top-loaded 1/4 wavelength helical resonators with a ground return circuit, as with Tesla’s original 1900 concept.  They report power transmission of greater than 500 watts over a range of 5 to 12 meters. 
• 2009: Powermat Technologies introduced wireless charging systems, that work with a combination of radio-frequency identification (RFID) and electromagnetic induction
• 2009: Palm (now a division of HP) launches the Palm Pre smartphone with the Palm Touchstone wireless charger.
• 2009: A Consortium of interested companies called the Wireless Power Consortium announce they are nearing completion for a new industry standard for low-power (which is eventually published in August 2010) inductive charging.
• 2009: An Ex approved Torch and Charger aimed at the offshore market is introduced. This product is developed by Wireless Power & Communication, a Norway based company.
• 2009: A simple analytical electrical model of electrodynamic induction power transmission is proposed and applied to a wireless power transfer system for implantable devices.
• 2009: Lasermotive uses diode laser to win $900k NASA prize in power beaming, breaking several world records in power and distance, by transmitting over a kilowatt more than several hundred meters.
• 2009: Sony shows a wireless electrodynamic-induction powered TV set, 60 W over 50 cm
• 2010: Haier Group debuts “the world's first” completely wireless LCD television at CES 2010 based on Prof. Marin Soljacic's follow-up research on the 1894 electrodynamic induction wireless energy transmission method and the Wireless Home Digital Interface (WHDI).
• 2010: System On Chip (SoC) group in University of British Columbia develops a highly efficient wireless power transmission systems using 4-coils. The design is optimized for implantable applications and power transfer efficiency of 82% is achieved.
• 2012: Meysam Zargham and Glenn Gulak at University of Toronto, presented for the first time a closed form analytical solution for the optimum load that achieves the maximum possible wireless power transfer efficiency under arbitrary input impedance conditions based on the general two-port parameters of the network. The proposed method effectively decoupled the design of the inductive coupling two-port from the problem of loading and power amplifier design.
• 2012: "Bioelectromagnetics and Implantable Devices" group in University of Utah, USA develops an efficient resonance based wireless power and data transfer system for biomedical Implants. Presented design achieves more than twice the efficiency and frequency bandwidth compared to conventional inductive link approach. Design approach is extendable to other industrial "smart" wireless power transfer system.
• 2012: Christopher Tucker, Kevin Warwick and William Holderbaum of the University of Reading, UK develop a highly efficient, compact power transfer system safe for use in human proximity. The design is simple and uses only a few components to generate stable currents for biomedical implants. It resulted from research that directly attempted to extend Tesla’s 1897 wireless power work.
• 2013: Resonance based multi-coil wireless power transfer system is proposed to reduce the variation in power transfer efficiency and data bandwidth with coupling variation. Such systems can compensate the effect of coil misalignment on system performance.
• 2013: A fully integrated wireless power receiver is demonstrated in CMOS process by Meysam Zargham and P.G. Gulak. The designed prototype requires no off-chip components or post-processing steps. The demonstrated single-chip prototype is only a few millimeters on each side, mass producible and heavily reduces the cost. This level of integration also enables new possibilities for disposable lab-on-chip solutions.,
• 2013: The concept of a virtual waveguide controlled by ordered magnetic fields for wireless power transmission is proposed.
• 2014: The first microfluidic implant coil is proposed for the wireless power transfer to the flexible telemetry system. The work demonstrates a soft and flexible coil fabricated with a liquid metal alloy encased in a biocompatible elastomeric substrate to target the application of biomedical implantable devices.
• 2014: Using compact size metamaterials, power transfer efficiency is enhanced for the wireless powered systems. The proposed applications include short-range wireless power transfer to biomedical implants and wireless charging.
• 2014: The first demonstration of resonance based wireless power transfer system to reduce the electromagnetic energy absorption (SAR) inside the human tissue.
• 2014: An interference free biomedical telemetry system is developed using resonance based multi-coil approach to comply with the federal regulations (e.g., FCC).

See also

• Beam-powered propulsion
• Beam Power Challenge – one of the NASA Centennial Challenges
• Differential capacitance
• Distributed generation
• Electricity distribution
• Electric power transmission
• Electromagnetic compatibility
• Electromagnetic radiation and health
• Energy harvesting
• Fermi gas
• Free electron model
• Friis transmission equation
• Microwave power transmission
• Resonant inductive coupling
• Surface plasmon
• Thinned array curse
• Transmission medium
• Wardenclyffe Tower

Further reading

Books

• Fleming, J. A. (1916) The principles of electric wave telegraphy and telephony. London: Longmans, Green and Co.
• Fleming, J. A. (1911). Propagation of electric currents in telephone & telegraph conductors. New York: Van Nostrand.
• Franklin, W. S. (1909). Electric waves: An advanced treatise on alternating-current theory. New York: Macmillan Co.
• General Electric Co. (1915). General Electric review, Volume 18. "Wireless Transmission of Energy" By Elihu Thomson. General Electric Company, Lynn. (ed. Lecture by Professor Thomson, National Electric Light Association, New York.)
• Hu, A. P. (2009). Wireless/Contactless power supply: Inductively coupled resonant converter solutions. Saarbrücken, Germany: VDM Verlag Dr. Müller.
• Kennelly, A. E. (1912). The application of hyperbolic functions to electrical engineering problems: Being the subject of a course of lectures delivered before the University of London in May and June 1911. London: University of London Press.
• Louis Cohen (1913). Formulae and tables for the calculation of alternating current problems. McGraw-Hill.
• Orlich, E. M. (1912). Die Theorie der Wechselströme.
• Steinmetz, C. P. (1914). Elementary lectures on electric discharges, waves and impulses, and other transients. New York: McGraw-Hill book co., inc.
• Walker, J., Halliday, D., & Resnick, R. (2011). Fundamentals of physics. Hoboken, NJ: Wiley.

Patents

• U.S. patent 4,955,562, Microwave powered aircraft, John E. Martin, et al. (1990).
• U.S. patent 3,933,323, Solid state solar to microwave energy converter system and apparatus, Kenneth W. Dudley, et al. (1976).
• U.S. patent 3,535,543, Microwave power receiving antenna, Carroll C. Dailey (1970).

References

1. ^ G. A. Landis, "Applications for Space Power by Laser Transmission," SPIE Optics, Electro-optics & Laser Conference, Los Angeles CA, 24–28 January 1994; Laser Power Beaming, SPIE Proceedings Vol. 2121, 252–255.
2. ^ Corum, K. L. and J. F. Corum, "Nikola Tesla and the Diameter of the Earth: A Discussion of One of the Many Modes of Operation of the Wardenclyffe Tower," 1996
3. New Scientist:Wireless charging for electric vehicles hits the road
4. ^ General Electric review, Volume 15 By General Electric. "Velocity of Propagation of Electric Field", Charles Proteus Steinmetz
5. 188,000 miles per second
6. Such as an internal change of load, starting and switching operations, and short circuits.
7. Such as the external change due to lightning.
8. Charles Steinmetz (Fellow, A. I. E. E. Chief Consulting Engineer, General Electric Company, Schenectady, N. Y.). "Condenser Discharge Through a General Gas Circuit". American Institute of Electrical Engineers., 1922. Transactions of the American Institute of Electrical Engineers. New York: American Institute of Electrical Engineers. Presented at the 10th Midwinter Convention of the A. I. E. E., New York, N. Y., 15–17 February 1922.
9. viz., the dissipation of electric energy by the resistance of the conductor through its conversion into heat;
10. Such as when it gives trouble by induction in telephone circuits or when it reaches such high intensities as to puncture insulation, cause mechanical motion, etc.
11. such as an iron needle.
12. ^ Theory and calculation of transient electric phenomena and oscillations By Charles Proteus Steinmetz
13. Speculation was made as to what the electric wave was, leading to the contradictory deductions that for certain reasons space is considered as a gas of infinitely low density, and for certain others as a solid.
14. Dave Baarman and Joshua Schwannecke (2009-12-00). "Understanding Wireless Power" (PDF). {{cite web}}: Check date values in: |date= (help)
15. Steinmetz, Charles Proteus (29 August 2008). Steinmetz, Dr. Charles Proteus, Elementary Lectures on Electric Discharges, Waves, and Impulses, and Other Transients, 2nd Edition, McGraw-Hill Book Company, Inc., 1914. Google Books. Retrieved 4 June 2009.
16. "A New Resonator for High Efficiency Wireless Power Transfer". Antennas and Propagation Society International Symposium (APSURSI), 2013 IEEE.
17. "Wireless charging, Adaptor die, Mar 5th 2009". The Economist. 7 November 2008. Retrieved 4 June 2009.
18. Buley, Taylor (9 January 2009). "Wireless technologies are starting to power devices, 01.09.09, 06:25 pm EST". Forbes. Retrieved 4 June 2009.
19. "Alternative Energy, From the unsustainable...to the unlimited". EETimes.com. 21 June 2010.
20. Patent Application PCT/CN2008/0728855
21. Patent US7164255
22. Experiments with Alternate Currents of Very High Frequency and Their Application to Methods of Artificial Illumination, AIEE, Columbia College, N.Y., 20 May 1891
23. Experiments with Alternate Currents of High Potential and High Frequency, IEE Address, London, February 1892
24. ^ "On Light and Other High Frequency Phenomena, Franklin Institute, Philadelphia, February 1893, and National Electric Light Association, St. Louis, March 1893
25. Norrie, H. S., "Induction Coils: How to make, use, and repair them". Norman H. Schneider, 1907, New York. 4th edition.
26. Gernsback, Hugo. "Nikola Tesla and His Achievements," Electrical Experimenter, January 1919. p. 615
27. Cheney, Margaret. Tesla: Man Out of Time, p. 174
28. ^ Leyh, G. E.; Kennan, M. D. (28 September 2008). Efficient wireless transmission of power using resonators with coupled electric fields. NAPS 2008 40th North American Power Symposium, Calgary, September 28-30 2008. Inst. of Electrical and Electronic Engineers. pp. 1–4. doi:10.1109/NAPS.2008.5307364. ISBN 978-1-4244-4283-6. Retrieved 20 November 2014.
29. Anderson, Leland I., Guided Weapons & Computer Technology, 21st Century Books, 1998.

    “In some cases when small amounts of energy are required the high elevation of the terminals, and more particularly of the receiving-terminal D', may not be necessary, since, especially when the frequency of the currents is very high, a sufficient amount of energy may be collected at that terminal by electrostatic induction from the upper air strata, which are rendered conducting by the active terminal of the transmitter or through which the currents from the same are conveyed."

30. Massa, A. Massa, G. Oliveri, F. Viani, and P. Rocca; Oliveri, Giacomo; Viani, Federico; Rocca, Paolo (June 2013). "Array designs for long-distance wireless power transmission - State-of-the-art and innovative solutions". Proceedings of the IEEE. 101 (6): 1464–1481. doi:10.1109/JPROC.2013.2245491.{{cite journal}}: CS1 maint: multiple names: authors list (link)
31. G. Landis, M. Stavnes, S. Oleson and J. Bozek, "Space Transfer With Ground-Based Laser/Electric Propulsion" (AIAA-92-3213) NASA Technical Memorandum TM-106060 (1992).
32. Landis, Geoffrey A. (7–12 May 2006). Reevaluating Satellite Solar Power Systems for Earth (PDF). IEEE 4th World Conference on Photovoltaic Energy Conversion. p. 2. Retrieved 11 May 2012.
33. Experimental Airborne Microwave Supported Platform Descriptive Note : Final rept. Jun 64 – Apr 65
34. "Scanning the Past: A History of Electrical Engineering from the Past, Hidetsugu Yagi". Ieee.cincinnati.fuse.net. Retrieved 4 June 2009.
35. ^ "Space Solar Energy Initiative". Space Island Group. Retrieved 4 June 2009.
36. ^ Wireless Power Transmission for Solar Power Satellite (SPS) (Second Draft by N. Shinohara), Space Solar Power Workshop, Georgia Institute of Technology
37. ^ Brown., W. C. (September 1984). "The History of Power Transmission by Radio Waves". Microwave Theory and Techniques, IEEE Transactions on. 32 (Volume: 32, Issue: 9 On page(s): 1230–1242+ ISSN: 0018–9480): 1230. Bibcode:1984ITMTT..32.1230B. doi:10.1109/TMTT.1984.1132833. {{cite journal}}: |issue= has extra text (help)
38. POINT-TO-POINT WIRELESS POWER TRANSPORTATION IN REUNION ISLAND 48th International Astronautical Congress, Turin, Italy, 6–10 October 1997 – IAF-97-R.4.08 J. D. Lan Sun Luk, A. Celeste, P. Romanacce, L. Chane Kuang Sang, J. C. Gatina – University of La Réunion – Faculty of Science and Technology.
39. Brown, W.C.; Eves, E.E. (June 1992). "Beamed microwave power transmission and its application to space" (PDF). IEEE Transactions on Microwave Theory and Techniques. 40 (6): 1239–1250. doi:10.1109/22.141357.
40. Sahai., A.; Graham, David (2 June 2011). "Optical wireless power transmission at long wavelengths". IEEE International Conference on Space Optical Systems and Applications (ICSOS), 2011, Santa Monica, CA (Print ISBN 978–1–4244–9686–0): 164–170. doi:10.1109/ICSOS.2011.5783662. ISBN 978-1-4244-9686-0.
41. Smith, David (4 January 2009). "Wireless power spells end for cables". The Observer. London.
42. "power transmission via lasers". Laserfocusworld.com. Retrieved 4 June 2009.
43. Skillings, Jonathan (23 August 2008). "Laser weapons: A distant target, CNET news August 23, 2008 1:41 pm PDT". News.cnet.com. Retrieved 4 June 2009.
44. "Laser Weapons "Almost Ready?" Not!". Defensetech.org. Retrieved 4 June 2009.
45. "White Sands testing new laser weapon system, US Army.mil, 30 Jan 2009". Army.mil. 30 January 2009. Retrieved 4 June 2009.
46. "Lasers Power Planes, Drones". Defensetech.org. Retrieved 4 June 2009.
47. "Riding a Beam of Light". Space.com. 24 October 2005. Retrieved 4 June 2009.
48. "Free-Space Laser Propagation: Atmospheric Effects". Ieee.org. Retrieved 4 June 2009.
    Propagation Characteristics of Laser Beams – Melles Griot catalog
    L. C. Andrews and R. L. Phillips, Laser Beam Propagation through Random Media, 2nd ed. (SPIE Press, 2005). Google Books. 2005. ISBN 978-0-8194-5948-0. Retrieved 4 June 2009.
49. Dr. Rüdiger Paschotta. "An explanation of Coherence". Rp-photonics.com. Retrieved 4 June 2009.
50. "An Evolutionary Path to SPS". Islandone.org. Retrieved 4 June 2009.
51. "A Supersynchronous SPS". Geoffreylandis.com. 28 August 1997. Retrieved 4 June 2009.
52. "Papers Relating to Space Photovoltaic Power, Power beaming, and Solar Power Satellites". Sff.net. doi:10.1089/153110701753198927. Retrieved 4 June 2009.
53. "Limitless clean energy from space". Nss.org. Retrieved 4 June 2009.
54. "Power Beaming (Climber) Competition". Spaceward.org. Retrieved 4 June 2009.
55. "From Concept to Reality". The Space Elevator. Retrieved 4 June 2009.
    "Space Elevator Tethers Coming Closer". Crnano.typepad.com. 31 January 2009. Retrieved 4 June 2009.
56. "Dryden Flight Research Center, Beamed Laser Power For UAVs". Nasa.gov. 7 May 2008. Retrieved 4 June 2009.
57. "Wireless recharging: Pulling the plug on electric cars". bbc.co.uk. 20 November 2012. Retrieved 17 November 2014.
58. Colorado Springs Notes: 1899-1900, Aleksandar Marincic, Editor, Nolit, Belgrade, 1978,
59. ^ Anderson, Leland (1992). Nikola Tesla on His Work with Alternating Currents and Their Application to Wireless Telegraphy, Telephony, and Transmission of Power: An Extended Interview. Sun Publishing. ISBN 1893817016.
60. Wei, Xuezhe; Wang, Zhenshi; Dai, Haifeng. 2014. "A Critical Review of Wireless Power Transfer via Strongly Coupled Magnetic Resonances." Energies 7, no. 7: 4316-4341.
61. Liu, C.; Hu, A.P.; Nair, N.K.C. Modelling and analysis of a capacitively coupled contactless power transfer system. IET Power Electron. 2011, 4, 808–815.
62. Mahomed, Yusuf, Development and application of general circuit theory to support capacitive coupling, thesis, 2012-09-13
63. Meyl, Konstantin, "Wireless Tesla Transponder : Field-physical basis for electrically coupled bidirectional far range transponders according to the invention of Nikola Tesla," Furtwangen University, Germany
64. Wei, Xuezhe; Wang, Zhenshi; Dai, Haifeng. 2014. "A Critical Review of Wireless Power Transfer via Strongly Coupled Magnetic Resonances." Energies 7, no. 7: 4316-4341.

    The principle of electric field coupling mode is essentially the redistribution of the surface charges on the object. A high-frequency and high-voltage driver source excites the resonant transmitter to generate an alternating electric field which can couple with the resonant receiver. Energy will be delivered as soon as this coupling relation is set up. The transfer efficiency of this mode is affected by surrounding objects, and the transfer power is relatively low, but if corresponding treatments are done beforehand, the electric field coupling mode will find suitable applications.

65. Boksan, Slavko, Nikola Tesla und sein Werk, Deutscher Verlag für Jugend und Volk, 1932, pp. 237–238.
66. 2008 North American Power Symposium.

    The power flowed through the ambient electric fields and returned through Earth, similar to Tesla’s original concept from 1900.

67. "Wireless Power Transfer via Strongly Coupled Magnetic Resonances," André Kurs, Aristeidis Karalis, Robert Moffatt, J. D. Joannopoulos, Peter Fisher, and Marin Soljacic, Science 6 July 2007: 83-86. Published online 7 June 2007
68. Rauscher, Elizabeth A., Electromagnetic Phenomena in Complex Geometries and Nonlinear Phenomena, Non-Hertzian Waves and Magnetic Monopoles, Tesla Book Company.
69. Anderson, Leland I., Guided Weapons & Computer Technology, 21st Century Books, 1998
70. Feynman, Richard P., Robert B. Leighton, Matthew Sands, The Feynman Lectures on Physics Volume II. Mainly electromagnetism and matter, Chapters 4-12, Addison–Wesley, 1964.
71. Marincic, Aleksandar, “Research of Nikola Tesla in Long Island Laboratory,” Energy and Development at the International Scientific Conference in Honor of the 130th Anniversary of the Birth of Nikola Tesla, The Tesla Journal, Numbers 6 & 7, pp. 25-28, Tesla Memorial Society, 1990.
72. ^ Erskine-Murry, James, A Handbook of Wireless Telegraphy, D. Van Nostrand Company, 1907
73. Rare Notes From Tesla on Wardenclyffe," Electric Spaceraft Journal, 1997
74. Yost, Charles, The Tesla Experiment--Lightning and Earth Electrical Resonance.
75. "Nikola Tesla and the Diameter of the Earth : A Discussion of One of the Many Modes of Operation of the Wardenclyffe Tower," K. L. Corum and J. F. Corum, Ph.D. 1996.
76. ^ Shinohara, Naoki (2014). Wireless Power Transfer via Radiowaves. John Wiley & Sons. p. 11. ISBN 1118862961.
77. ^ Tomar, Anuradha; Gupta, Sunil (July 2012). "Wireless power Transmission: Applications and Components". International Journal of Engineering Research & Technology. 1 (5). ISSN 2278-0181. Retrieved 9 November 2014.
78. ^ Lee, C.K.; Zhong, W.X.; Hui, S.Y.R. (5 September 2012). Recent Progress in Mid-Range Wireless Power Transfer (PDF). The 4th Annual IEEE Energy Conversion Congress and Exposition (ECCE 2012). Raleigh, North Carolina: Inst. of Electrical and Electronic Engineers. pp. 3819–3821. Retrieved 4 November 2014.
79. ^ Tesla, Nikola (May 20, 1891) Experiments with Alternate Currents of Very High Frequency and Their Application to Methods of Artificial Illumination, lecture before the American Inst. of Electrical Engineers, Columbia College, New York. Reprinted as a book of the same name by. Wildside Press. 2006. ISBN 0809501627.
80. ^ Wheeler, L. P. (August 1943). "Tesla's contribution to high frequency". Electrical Engineering. 62 (8). IEEE: 355–357. doi:10.1109/EE.1943.6435874. ISSN 0095-9197.
81. ^ Cheney, Margaret; Uth, Robert; Glenn, Jim (1999). Tesla, Master of Lightning. Barnes & Noble Publishing. pp. 90–92. ISBN 0760710058.
82. Tesla was notoriously secretive about the distance he could transmit power. One of his few disclosures of details was in Tesla, Nikola (June 1900). "The Problem of Increasing Human Energy". Century Magazine. New York: The Century Co. Retrieved 20 November 2014. fig. 7. The caption reads: "EXPERIMENT TO ILLUSTRATE AN INDUCTIVE EFFECT OF AN ELECTRICAL OSCILLATOR OF GREAT POWER - The photograph shows three ordinary incandescent lamps lighted to full candle-power by currents induced in a local loop consisting of a single wire forming a square of fifty feet each side, which includes the lamps, and which is at a distance of one hundred feet from the primary circuit energized by the oscillator. The loop likewise includes an electrical condenser, and is exactly attuned to the vibrations of the oscillator, which is worked at less than five percent of its total capacity."
83. US Patent No. 645576, Nikola Tesla, System of transmission of electrical energy, filed September 2, 1897; granted March 20, 1900
84. Tesla, Nikola (5 March 1904). "The Transmission of Electric Energy Without Wires". Electrical World and Engineer. 43. McGraw Publishing Co.: 23760–23761. Retrieved 19 November 2014., reprinted in Scientific American Supplement, Munn and Co., Vol. 57, No. 1483, June 4, 1904, p. 23760-23761
85. ^ Broad, William J. (4 May 2009). "A Battle to Preserve a Visionary's Bold Failure". New York Times. New York: The New York Times Co. pp. D1. Retrieved 19 November 2014.
86. Carlson 2013 Tesla: Inventor of the Electrical Age, p. 209-210
87. Carlson 2013 Tesla: Inventor of the Electrical Age, Ch. 14 & 15, p. 302-367
88. Hawkins, Lawrence A. (February 1903). "Nikola Tesla: His Work and Unfulfilled Promises". The Electrical Age. 30 (2): 107–108. Retrieved 4 November 2014.
89. ^ Carlson, W. Bernard (2013). Tesla: Inventor of the Electrical Age. Princeton University Press. pp. 294, 301. ISBN 1400846552.
90. ^ Coe, Lewis (2006). Wireless Radio: A History. McFarland. p. 112. ISBN 0786426624.
91. ^ Brown, William C. (1984). "The history of power transmission by radio waves". MTT-Trans. on Microwave Theory and Technique. 32 (9). Inst. of Electrical and Electronic Engineers: 1230–1234. Retrieved 20 November 2014.
92. ^ Dunning, Brian (15 January 2013). "Did Tesla plan to transmit power world-wide through the sky?". The Cult of Nikola Tesla. Skeptoid.com. Retrieved 4 November 2014.
93. "Life and Legacy: Colorado Springs". Tesla: Master of Lightning - companion site for 2000 PBS television documentary. PBS.org, US Public Broadcasting Service website. 2000. Retrieved 19 November 2014. {{cite web}}: External link in |publisher= (help)
94. ^ Dunning, Brian (15 January 2013). "Did Tesla cause a field of light bulbs 26 miles away to illuminate wirelessly?". The Cult of Nikola Tesla. Skeptoid.com. Retrieved 4 November 2014.
95. Tesla, Nikola; Marinčić, Aleksandar, Ed. (1977). Colorado Springs Notes, 1899-1900. Beograd, Yugoslavia: The Nikola Tesla Museum.{{cite book}}: CS1 maint: multiple names: authors list (link)
96. O'Neill, John J. (1944). Prodigal Genius: The life of Nikola Tesla. Ives Washburn, Inc. p. 193.
97. Wearing, Judy (2009). Edison's Concrete Piano: Flying Tanks, Six-Nippled Sheep, Walk-On-Water Shoes, and 12 Other Flops From Great Inventors. ECW Press. p. 98. ISBN 1554905516.
98. ^ Curty, Jari-Pascal; Declercq, Michel; Dehollain, Catherine; Joehl, Norbert (2006). Design and Optimization of Passive UHF RFID Systems. Springer. p. 4. ISBN 0387447105.
99. Belohlavek, Peter; Wagner, John W (2008). Innovation: The Lessons of Nikola Tesla. Blue Eagle Group. pp. 78–79. ISBN 9876510096.
100. "Dennis Papadopoulos interview". Tesla: Master of Lightning - companion site for 2000 PBS television documentary. PBS.org, US Public Broadcasting Service website. 2000. Retrieved 19 November 2014. {{cite web}}: External link in |publisher= (help)
101. Glaser, Peter E. (22 November 1968). "Power from the Sun: Its future" (PDF). Science. 162 (3856). American Assoc. for the Advancement of Science: 857–861. doi:10.1126/science.162.3856.857. Retrieved 4 November 2014.
102. ^ Dickinson, Richard M. (1976). "Performance of a high-power 2.388 GHz receiving array in wireless power transmission over 1.54 km" (PDF). MTT-S Int'l Microwave Symposium Digest: 139–141. Retrieved 9 November 2014.
103. US Patent No. 527857A, Maurice Hutin, Maurice Leblanc, Transformer system for electric railways, filed November 16, 1892; granted October 23, 1894
104. US Patent No. 3713148A, Mario W. Cardullo, William L. Parks, Transponder apparatus and system, filed May 21, 1970; granted January 23, 1973
105. Koelle, A. R.; Depp, S. W.; Freyman, R. W. (1975). "Short-range radio-telemetry for identifiction, using modulated RF backscatter". Proc. of the IEEE. 63 (8). Inst. of Electrical and Electronic Engineers: 1260–1261. {{cite journal}}: |access-date= requires |url= (help); Cite has empty unknown parameter: |coauthors= (help)
106. ^ Sayer, Peter (19 December 2008). "Wireless Power Consortium to Unleash Electronic Gadgets". PCWorld. IDG Consumer and SMB. Retrieved 8 December 2014.
107. "Global Qi Standard Powers Up Wireless Charging". PRNewswire. UBM plc. 2 September 2009. Retrieved 8 December 2014.
108. Kurs, André; Karalis, Aristeidis; Moffatt, Robert (July 2007). "Wireless Power Transfer via Strongly Coupled Magnetic Resonances" (PDF). Science. 317. American Association for the Advancement of Science: 83–85. doi:10.1126/science.1143254. ISSN 1095-9203. {{cite journal}}: line feed character in |title= at position 37 (help)
109. Richard Fitzpatrick (2007). "Ampère's Circuital Law".
110. Thomas H. White, Nikola Tesla: The Guy Who DIDN'T "Invent Radio" earlyradiohistory.us, November 1, 2012
111. "Experiments With Alternating Currents of Very High Frequency, and Their Application to Methods of Artificial Illumination," Columbia College, 1891.
112. "Electricity at the Columbian Exposition" By John Patrick Barrett. 1894. Page 168–169.
113. "On Light and Other High Frequency Phenomena, Franklin Institute, Philadelphia, February 1893, and National Electric Light Association, St. Louis, March 1893
114. "Nikola Tesla, 1856 – 1943". IEEE History Center, IEEE, 2003. lecture-demonstration St. Louis.
115. Cheney, Margaret, Tesla Man Out of Time
116. "Experiments with Alternating Currents of Very High Frequency and Their Application to Methods of Artificial Illumination, AIEE, Columbia College, N.Y., May 20, 1891". 20 June 1891.
117. "Experiments with Alternate Currents of High Potential and High Frequency, IEE Address,' London, February 1892". 1892-02-00. {{cite web}}: Check date values in: |date= (help)
118. "On Light and Other High Frequency Phenomena, 'Franklin Institute,' Philadelphia, February 1893, and National Electric Light Association, St. Louis, March 1893". 1893-03-00. {{cite web}}: Check date values in: |date= (help)
119. Hutin, Maurice; Maurice LeBlanc (23 October 1894). "Transformer System for Electric Railways". United States Patent Office. Retrieved 14 April 2010.
120. Howard B. Rockman, Intellectual Property Law for Engineers and Scientists , page 196'
121. Cite error: The named reference supreme.justia was invoked but never defined (see the help page).
122. Guglielmo Marconi – Britannica Online Encyclopedia
123. O'Neill, John J., Prodigal Genius The Life of Nikola Tesla, Ives Washburn Inc., 1944, 1964, page 144
124. Carlson, W. Bernard, Tesla: Inventor of the Electrical Age, Princeton University Press - 2013
125. Cooper, Drury W., internal document of the law firm Kerr, Page & Cooper, New York City, 1916
126. O'Neill, John J., Prodigal Genius The Life of Nikola Tesla, Ives Washburn Inc., 1944, 1964, page 144
127. Carlson, W. Bernard, Tesla: Inventor of the Electrical Age, Princeton University Press - 2013
128. 5 June 1899, NIKOLA TESLA COLORADO SPRINGS NOTES 1899–1900, Nolit, 1978
129. Margaret Cheney, Robert Uth, Jim Glenn, Tesla, Master of Lightning, Barnes & Noble Publishing - 1999, page 106
130. "Nikola Tesla and John Jacob Astor," Marc J. Seifer, SIXTH INTERNATIONAL SYMPOSIUM NIKOLA TESLA 18–20 October 2006, Belgrade, SASA, Serbia
131. Childress, Hatcher Childress, The Fantastic Inventions of Nikola Tesla, 1993 - page 254
132. The Electrician (London, September 1902, pages 814-815)
133. Cooper, Drury W., internal document of the law firm Kerr, Page & Cooper, New York City, 1916.
134. "Scanning the Past: A History of Electrical Engineering from the Past, Hidetsugu Yagi". Ieee.cincinnati.fuse.net. Retrieved 4 June 2009.
135. A survey of the elements of power Transmission by microwave beam, in 1961 IRE Int. Conf. Rec., vol.9, part 3, pp.93–105
136. "IEEE Microwave Theory and Techniques, Bill Brown's Distinguished Career". Mtt.org. Retrieved 4 June 2009.
137. "Power from the Sun: Its Future," Science Vol. 162, pp. 957–961 (1968)
138. "Solar Power Satellite patent". Patft.uspto.gov. Retrieved 4 June 2009.
139. History of RFID
140. "MIT lights 60W light bulb by wireless power transmission". EetIndia.co.in. Retrieved 3 May 2010.
141. "Bombardier PRIMOVE Technology". Bombardier.com. Retrieved 4 June 2009.
142. "Intel imagines wireless power for your laptop". TG Daily. 22 August 2008. Retrieved 4 June 2009.
143. Leyh, G. E. and M. D. Kennan,Efficient Wireless Transmission of Power Using Resonators with Coupled Electric Fields.
144. Woyke, Elizabeth (02 12 2010). "Wireless Charging Goes Mainstream". Forbes.com. {{cite web}}: Check date values in: |date= (help)
145. "wireless electricity specification nearing completion". PCWorld. 18 August 2009. Retrieved 21 August 2009.
146. "TX40 and CX40, Ex approved Torch and Charger".
147. "A. Kumar, S. Mirabbasi, and M. Chiao, "Resonance-Based Wireless Power Delivery for Implantable Devices," IEEE Biomedical Circuits and Systems Conference (BioCAS), pp. 25–28, November 2009".
148. "LaserMotive LLC Wins Prize in Power Beaming Challenge".
149. "Sony - Sony develops highly efficient wireless power transfer system : : News : Sony Europe Press Centre". Presscentre.sony.eu. 2 October 2009. Retrieved 22 April 2013.
150. "Haier's wireless HDTV lacks wires, svelte profile (video)". Engadget. 7 January 2010. Retrieved 7 January 2009.
151. "Anil Kumar RamRakhyani; Shahriar Mirabbasi; Mu Chiao; , "Design and Optimization of Resonance-Based Efficient Wireless Power Delivery Systems for Biomedical Implants," IEEE Transactions on Biomedical Circuits and Systems".
152. "Meysam Zargham; P. Glenn Gulak, "Maximum Achievable Efficiency in Near-Field Coupled Power-Transfer Systems," IEEE Transactions on Biomedical Circuits and Systems, vol. 6, no. 3, June 2012".
153. "Anil Kumar RamRakhyani; Gianluca Lazzi;, "On the Design of Efficient Multi-Coil Telemetry System for Biomedical Implants," IEEE Transactions on Biomedical Circuits and Systems".
154. "C.A. Tucker, K. Warwick, W. Holderbaum, "Efficient wireless power delivery for biomedical implants," IET Wireless Sensor Systems".
155. "Anil Kumar RamRakhyani; Gianluca Lazzi, "Multi-coil Telemetry System for Compensation of Coil Misalignment Effects in Implantable Systems," Antennas and Wireless Propagation Letters, IEEE".
156. "Anil Kumar RamRakhyani; Gianluca Lazzi, "Use of multi-coil telemetry system for high tolerance efficient wireless power system," IEEE ICWITS".
157. "Meysam Zargham; P. Glenn Gulak, "A 0.13µm CMOS Integrated Wireless Power Receiver for Biomedical Applications," Proceedings of the 2013 European Solid-State Circuits Conference (ESSCIRC), IEEE".
158. "Meysam Zargham; P. Glenn Gulak, "Fully Integrated On-Chip Coil in 0.13µm CMOS for Wireless Power Transfer Through Biological Media," Transactions on Biomedical Circuits and systems, IEEE".
159. Tucker, C.A.; Warwick, K.; Holderbaum, W. (2013). "C.A. Tucker, K. Warwick, W. Holderbaum, "A contribution to the wireless transmission of power," International Journal of Electrical Power and Energy Systems". International Journal of Electrical Power & Energy Systems. 47: 235. doi:10.1016/j.ijepes.2012.10.066.
160. "A. Qusba, Anil Kumar RamRakhyani, J. So, G. Hayes, M. Dickey, G. Lazzi, "On the Design of Microfluidic Implant Coil for Flexible Telemetry System," IEEE Sensors Journal".
161. "A. Rajagopalan, A. K. RamRakhyani, D. Schurig, G. Lazzi, "Improving Power Transfer Efficiency of a Short-Range Telemetry System Using Compact Metamaterials," IEEE Transactions on Microwave Theory and Techniques".
162. "A. K. RamRakhyani, G. Lazzi, "Multi-coil approach to reduce electromagnetic energy absorption for wirelessly powered implants," IET Healthcare Technology Letters". doi:10.1049/htl.2013.0035;jsessionid=1wi9jyn0ocoxd.x-iet-live-01. {{cite web}}: Unknown parameter |doi_brokendate= ignored (|doi-broken-date= suggested) (help)
163. Ramrakhyani, A.K.; Lazzi, G. (2014). "A. K. RamRakhyani, G. Lazzi, "Interference-free wireless power transfer system for biomedical implants using multi-coil approach," IET Electronics Letters". Electronics Letters. 50 (12): 853. doi:10.1049/el.2014.0567.

External links

• Howstuffworks "How Wireless Power Works" – describes near-range and mid-range wireless power transmission using induction and radiation techniques.
• Microwave Power Transmission, – its history before 1980.
• The Stationary High Altitude Relay Platform (SHARP), – microwave beam powered.
• Marin Soljačić's MIT WiTricity – wireless power transmission pages.
• Anticipating MIT WiTricity – The resonant magnetic induction method was demonstrated in 1898.
• Rezence – official site of a wireless power standard promoted by the Alliance for Wireless Power
• Qi – official site of a wireless power standard promoted by the Wireless Power Consortium
• PMA – official site of a wireless power standard promoted by the Power Matters Alliance

• Emerging technologies
• Energy development
• Electric power distribution
• Electromagnetic compatibility
• Microwave transmission
• Wireless energy transfer