Misplaced Pages

Revision as of 00:14, 13 October 2006

Template:Totallydisputed

Cold fusion is a theoretical fusion reaction that occurs near room temperature and pressure using relatively simple devices. The temperatures and pressures required for thermonuclear reactions are tremendous, and must be contained within an as-yet technologically impractical fusion reactor - or be released, as by a fusion bomb. In a narrower sense, "cold fusion" also refers to a particular type of fusion supposedly occurring in electrolytic cells.

Cold fusion was brought into popular consciousness by the controversy surrounding the Fleischmann-Pons experiment in March of 1989. A number of other scientists have reported replication of their experimental observation of anomalous heat generation in electrolytic cells, but in a non-predictable way, and most scientists believe that there is no proof of cold fusion in these experiments.

The subject has been of scientific interest since nuclear fusion was first understood. Hot nuclear fusion using deuterium yields large amounts of energy, uses an abundant fuel source, and produces only small amounts of manageable waste; thus a cheap and simple process of nuclear fusion would have great economic impact. No "cold" fusion experiments that gave an otherwise unexplainable net release of energy have so far been shown to be reproduceable.

Early work

The idea that palladium or titanium might catalyze fusion stems from the special ability of these metals to absorb large quantities of hydrogen (including its deuterium isotope), the hope being that deuterium atoms would be close enough together to induce fusion at ordinary temperatures. The special ability of palladium to absorb hydrogen was recognized in the nineteenth century. In the late nineteen-twenties, two German scientists, F. Paneth and K. Peters, reported the transformation of hydrogen into helium by spontaneous nuclear catalysis when hydrogen is absorbed by finely divided palladium at room temperature. These authors later acknowledged that the helium they measured was due to background from the air.

In 1927, Swedish scientist J. Tandberg said that he had fused hydrogen into helium in an electrolytic cell with palladium electrodes. On the basis of his work he applied for a Swedish patent for "a method to produce helium and useful reaction energy". After deuterium was discovered in 1932, Tandberg continued his experiments with heavy water. Due to Paneth and Peters' retraction, Tandberg's patent application was eventually denied.

Pons and Fleischmann's experiment

On March 23, 1989, the chemists Stanley Pons and Martin Fleischmann ("P and F") at the University of Utah held a press conference and reported the production of excess heat that could only be explained by a nuclear process. The report was particularly astounding given the simplicity of the equipment, just a pair of electrodes connected to a battery and immersed in a jar of heavy water (dideuterium oxide). The press reported on the experiments widely, and it was one of the front-page items on most newspapers around the world. The immense beneficial implications of the Utah experiments, if they were correct, and the ready availability of the required equipment, led scientists around the world to attempt to repeat the experiments within hours of the announcement.

The press conference followed about a year of work of increasing tempo by Pons and Fleischmann, who had been working on their basic experiments since 1984. In 1988 they applied to the US Department of Energy for funding for a larger series of experiments: up to this point they had been running their experiments "out of pocket".

The grant proposal was turned over to several people for peer review, including Steven Jones of Brigham Young University. Jones had worked on muon-catalyzed fusion for some time, and had written an article on the topic entitled Cold Nuclear Fusion that had been published in Scientific American in July 1987. He had since turned his attention to the problem of fusion in high-pressure environments, believing it could explain the fact that the interior temperature of the Earth was hotter than could be explained without nuclear reactions, and by unusually high concentrations of helium-3 around volcanoes that implied some sort of nuclear reaction within. At first he worked with diamond anvils, but had since moved to electrolytic cells similar to those being worked on by Pons and Fleischmann, which he referred to as piezonuclear fusion. In order to characterize the reactions, Jones had spent considerable time designing and building a neutron counter, one able to accurately measure the tiny numbers of neutrons being produced in his experiments.

Both teams were in Utah, and met on several occasions to discuss sharing work and techniques. During this time Pons and Fleischmann described their experiments as generating considerable "excess energy", excess in that it could not be explained by chemical reactions alone. If this were true, their device would have considerable commercial value, and should be protected by patents. Jones was measuring neutron flux instead, and seems to have considered it primarily of scientific interest, not commercial. In order to avoid problems in the future, the teams apparently agreed to simultaneously publish their results, although their accounts of their March 6 meeting differ.

In mid-March both teams were ready to publish, and Fleischmann and Jones were to meet at the airport on the 24th to both hand in their papers at the exact same time. However, Pons and Fleischmann then "jumped the gun", and held their press conference the day before. Jones, apparently furious at being "scooped", faxed in his paper to Nature as soon as he saw the press announcements. Thus the teams both rushed to publish, which has perhaps muddied the field more than any scientific aspects.

Within days scientists around the world had started work on duplications of the experiments. On April 10 a team at Texas A&M University published results of excess heat, and later that day a team at the Georgia Institute of Technology announced neutron production. Both results were widely reported on in the press. Not so well reported was the fact that both teams soon withdrew their results for lack of evidence. For the next six weeks competing claims, counterclaims, and suggested explanations kept the topic on the front pages, and led to what writers have referred to as "fusion confusion."

On April 12 Pons received a standing ovation from about 7000 chemists at the semi-annual meeting of the American Chemical Society. On May 1 a meeting of the American Physical Society held a session on cold fusion that ran past midnight; a string of failed experiments were reported. The dramatically different reception at the two meetings was attributed to the results of experiments- many scientists had tried and failed to replicate the results in the intervening weeks.

Also in May, the president of the University of Utah, who had already secured a $5 million commitment from his state legislature, asked for $25 million from the federal government to set up a "National Cold Fusion Institute". At the end of May the Energy Research Advisory Board (under a charge of the US Department of Energy) formed a special panel to investigate cold fusion. The scientists in the panel found the evidence for cold fusion to be unconvincing. Nevertheless, the panel was "sympathetic toward modest support for carefully focused and cooperative experiments within the present funding system".

Both critics and those attempting replications were frustrated by what they said was incomplete information released by the University of Utah. With the initial reports suggesting successful duplication of their experiments there was not much public criticism, but a growing body of failed experiments started a "buzz" of their own. Pons and Fleischmann later apparently claimed that there was a "secret" to the experiment, a statement that infuriated the majority of scientists to the point of dismissing the experiment out of hand.

By the end of May much of the media attention had faded. This was due not only to the competing results and counterclaims, but also to the limited attention span of modern media. However, while the research effort also cooled to some degree, projects continued around the world.

Experimental set-up and observations

In their original set-up, Fleischmann and Pons used a Dewar flask (a double-walled vacuum flask) for the electrolysis, so that heat conduction would be minimal on the side and the bottom of the cell (only 5% of the heat loss in this experiment). The cell flask was then submerged in a bath maintained at constant temperature to eliminate the effect of external heat sources. They used an open cell, thus allowing the gaseous deuterium and oxygen resulting from the electrolysis reaction to leave the cell (with some heat too). It was necessary to replenish the cell with heavy water at regular intervals. The cell was tall and narrow, so that the bubbling action of the gas kept the electrolyte well mixed and of a uniform temperature. Special attention was paid to the purity of the palladium cathode and electrolyte to prevent the build-up of material on its surface, especially after long periods of operation.

The cell was also instrumented with a thermistor to measure the temperature of the electrolyte, and an electrical heater to generate pulses of heat and calibrate the heat loss due to the gas outlet. After calibration, it was possible to compute the heat generated by the reaction.

A constant current was applied to the cell continuously for many weeks, and heavy water was added as necessary. For most of the time, the power input to the cell was equal to the power that went out of the cell within measuring accuracy, and the cell temperature was stable at around 30 °C. But then, at some point (and in some of the experiments), the temperature rose suddenly to about 50 °C without changes in the input power, for durations of 2 days or more. The generated power was calculated to be about 20 times the input power during the power bursts. Eventually the power bursts in any one cell would no longer occur and the cell was turned off.

Continuing efforts

Since 1989, a number of people have done research on the possibilities of generating power with cold fusion. Scientists in several countries continue the research, and meet at the International Conference on Cold Fusion (see Proceedings at www.lenr-can.org).

The generation of excess heat has been reported by

• Michael McKubre, director of the Energy Research Center at SRI International,
• Richard A. Oriani (University of Minnesota, in December 1990),
• Robert A. Huggins (at Stanford University in March 1990),
• Y. Arata (Osaka University, Japan),

among others. In the best experimental set-up, excess heat was observed in 50% of the experiment reproductions. Various fusion ashes and transmutations were observed by some scientists.

Dr. Michael McKubre thinks a working cold fusion reactor is possible. Dr. Edmund Storms, a former scientist with The Los Alamos National Laboratory in New Mexico, maintains an international database of research into cold fusion.

In 2004, the United States Department of Energy (DOE) commissioned a panel of eighteen scientists to review new experimental evidence on cold fusion, to determine if their policies towards it should be altered. The panel was provided with a paper, New physical effects in metal deuterides, by those scientists that requested the review of the DOE. According to a summary of the report, "he conclusions reached by the reviewers... are similar to those found in the 1989 review."

Controversy

A majority of scientists consider current cold fusion research to be of questionable validity, while proponents argue that they are conducting valid experiments that challenge mainstream science (see history of science and technology). Here are the main arguments in the controversy.

Reproducibility of the result

Cold fusion researchers have reported the production of excess heat in their experiments. However, this result is not consistent, and its exact cause is unknown. No sure method of reproducing the result has been developed.

It is not uncommon for a not-yet-understood phenomenon to be difficult to control, and to bring erratic results. Attempts to repeat electrostatic experiments often fail due to excessive air humidity. This does not mean that electrostatic phenomena are fictitious, or that experimental data are fraudulent. On the contrary, occasional observations of new events, by qualified experimentalists, can in some cases be the preliminary steps leading to recognized discoveries.

The reproducibility of the result will remain the main issue in the Cold Fusion controversy until a scientist designs an experiment that is fully reproducible by following a recipe, or that generates power continuously rather than sporadically.

Current understanding of nuclear process

The DOE panel says: "Nuclear fusion at room temperature, of the type discussed in this report, would be contrary to all understanding gained of nuclear reactions in the last half century; it would require the invention of an entirely new nuclear process".

However, this argument only says that the experiment has unexplained results, not that the experiment is wrong. As an analogy, superconductivity was observed in 1911, and explained theoretically only in 1957.

Current understanding of hot nuclear fusion shows that the following explanations are not adequate:

• Nuclear reaction in general: The average density of deuterium in the palladium rod seems vastly insufficient to force pairs of nuclei close enough for fusion to occur according to mechanisms known to mainstream theories. The average distance is approximately 0.17 nanometers, a distance at which the attractive strong nuclear force cannot overcome the Coulomb repulsion. Actually, deuterium atoms are closer together in D2 gas molecules, which do not exhibit fusion.

• Absence of standard nuclear fusion products: if the excess heat were generated by the fusion of 2 deuterium atoms, the most probable outcome would be the generation of either a tritium atom and a proton, or a He and a neutron. The level of neutrons, tritium and He actually observed in Fleischmann-Pons experiment have been well below the level expected in view of the heat generated, implying that these fusion reactions cannot explain it.

• Fusion of deuterium into helium 4: if the excess heat were generated by the hot fusion of 2 deuterium atoms into He, a reaction which is normally extremely rare, gamma rays and helium would be generated. Again, insufficient levels of helium and gamma rays have been observed to explain the excess heat, and there is no known mechanism to explain how gamma rays could be converted into heat.

Energy source vs power store

While the output power is higher than the input power during the power burst, the power balance over the whole experiment does not show significant imbalances. Since the mechanism under the power burst is not known, one cannot say whether energy is really produced, or simply stored during the early stages of the experiment (loading of deuterium in the Palladium cathode) for later release during the power burst.

A "power store" discovery would have much less value than an "energy source" one, especially if the stored power can only be released in the form of heat.

Other kinds of fusion

A variety of other methods are known to effect nuclear fusion. Some are "cold" in the strict sense as no part of the material is hot (except for the reaction products), some are "cold" in the limited sense that the bulk of the material is at a relatively low temperature and pressure but the reactants are not, and some are "hot" fusion methods that create macroscopic regions of very high temperature and pressure.

• Fusion with low-energy reactants:
  • Muon-catalyzed fusion occurs at ordinary temperatures. It was studied in detail by Steven Jones in the early 1980s. It has not been reported to produce net energy. Because of the energy required to create muons, their 2.2 µs half-life, and the chance that muons will bind to new helium nuclei and thus stop catalyzing fusion, net energy production from this reaction is not believed to be possible.
• Fusion with high-energy reactants in relatively cold condensed matter: (Energy losses from the small hot spots to the surrounding cold matter will generally preclude any possibility of net energy production.)
  • Pyroelectric fusion was reported in April 2005 by a team at UCLA. The scientists used a pyroelectric crystal heated from −34 to 7 °C, combined with a tungsten needle to produce an electric field of about 25 gigavolts per meter to ionize and accelerate deuterium nuclei into an erbium deuteride target. Though the energy of the deuterium ions generated by the crystal has not been directly measured, the authors used 100 keV (a temperature of about 10 K) as an estimate in their modeling. At these energy levels, two deuterium nuclei can fuse together to produce a helium-3 nucleus, a 2.45 MeV neutron and bremsstrahlung. This experiment has been repeated successfully, and other scientists have confirmed the results. Although it makes a useful neutron generator, the apparatus is not intended for power generation since it requires far more energy than it produces.
  • Antimatter-initialized fusion uses small amounts of antimatter to trigger a tiny fusion explosion. This has been studied primarily in the context of making nuclear pulse propulsion feasible. This is not near becoming a practical power source, due to the cost of manufacturing antimatter alone.
  • In sonoluminescence, acoustic shock waves create temporary bubbles that collapse shortly after creation, producing very high temperatures and pressures. In 2002, Rusi P. Taleyarkhan reported the possibility that bubble fusion occurs in those collapsing bubbles. As of 2005, experiments to determine whether fusion is occurring give conflicting results. If fusion is occurring, it is because the local temperature and pressure are sufficiently high to produce hot fusion.
• Fusion with macroscopic regions of high energy plasma:
  • "Standard" "hot" fusion, in which the fuel reaches tremendous temperature and pressure inside a fusion reactor, nuclear weapon, or star.
  • The Farnsworth-Hirsch Fusor is a tabletop device in which fusion occurs. This fusion comes from high effective temperatures produced by electrostatic acceleration of ions. The device can be built inexpensively, but it too is unable to produce a net power output. These devices have a valid use however, and are commercially sold as a source of neutrons. The ion energy distribution is generally supposed to be nearly mono-energetic, but Todd Rider showed in his doctoral thesis for Massachusetts Institute of Technology that such non-Maxwellian distributions require too much recirculating power to be practically sustainable.

References

1. Physicist Richard Garwin, IBM fellow emeritus at the Watson Research Center, commented about investigating cold fusion claims at a 2005 meeting at Massachusetts Institute of Technology: "If one had that energy, that would be great. And I would be the first one to cheer. But why can not reproduce the energy that they get?"
2. APS Special Session on Cold Fusion, May 1-2, 1989
3. Hagelstein P. et al., "New physical effects in metal deuterides", submitted to the 2004 DoE panel on cold fusion
4. Report of the review from the DOE and DOE press-release

• Beaudette, Charles, Excess Heat: why cold fusion research prevailed, Infinite Energy Press; ISBN 0967854814, Oak Grove Press, LLC; 1st edition May 15 2000.
• Park, Robert L. Voodoo Science: The Road from Foolishness to Fraud'; Oxford University Press, New York; ISBN 0195135156; May 15 2000. It gives a thorough account of cold fusion and its history which represents the perspective of the mainstream scientific community.
• Aspden, Harold, Cold Fusion Lectures and Essays, 1998 (html available). It gives a firsthand thorough account of the efforts and experiments in the development of cold fusion, including the obstruction and hostility done by state agencies and the industry; it presents also the description of this British engineer and physicist GB Patent no. 2,231,195 (1993) and U.S. Patent no. 5,734,122 (1998).
• Close, Frank, Too Hot To Handle, by; Penguin Books; ISBN 0140159266; 1992 and Huizenga, John R, Cold Fusion: the scientific fiasco of the century, by; Oxford Paperbacks; ISBN 0198558171; 1992. Two other sceptical books from the scientific mainstream are those by Frank Close (1992) and John Huizenga (1992). Huizenga was co-chair of the DOE panel set up to investigate the Pons/Fleischmann experiment, and his book is perhaps the definitive account of the cold fusion affair.
• Fire from Ice, by Eugene Mallove; Infinite Energy Press; ISBN 1892925028; 1991. It's an early account from the pro-cold-fusion perspective. Charles Beaudette's Excess heat (2000) is a more recent scientific account of why cold fusion research prevailed.

See also

• 2004 DoE panel on cold fusion
• Timeline of cold fusion
• Martin Fleischmann
• Stanley Pons
• Mizuno experiment
• Cold fusion controversy
• Low energy nuclear reaction
• Biological transmutation
• Pathological science
• Pathological disbelief
• Huemul Project

Further reading

Reports and reviews

• "Cold Fusion Research" - Energy Research Advisory Board report (November 1989)
  • Conclusions and recommendations section of the report
• U.S. Navy Report Detailing a Decade of Cold Fusion Research "Thermal and Nuclear Aspects of the Pd/D2O System", U.S. Navy TECHNICAL REPORT 1862, February 2002
• U.S. DoE 2004 Cold Fusion Review - U.S. Department of Energy review of 15 years of cold fusion experiments
  • Additional information on the DoE 2004 Cold Fusion Review. This page includes the full text of the reviewer's comments, which is not available on the DoE pages, plus links to the full text of 42 of the papers submitted by cold fusion researchers to the review panel. (The list of all 130 submitted papers can be found here.)
  • A response to the review of cold fusion by DOE - by Edmund Storms
  • Response to the DoE/2004 Review of Cold-Fusion Research - C. Beaudette's critique of the DoE 2004 Cold Fusion Review
• Cold Fusion - An Objective Assessment - by Dr. Edmund Storms, a review of the experimental results (December 2001; 233 references, including 34 studies reporting anomalous energy using the Pons-Fleischmann method)
• A Student's Guide to Cold Fusion - by Edmund Storms. A 55-page introduction to the subject.
• Overview of BARC Studies in Cold Fusion. - P.K. Iyengar (Atomic Energy Commission, India) and M. Srinivasan (Bhabha Atomic Research Centre) review some of the major research in India.
• Review Of Transmutation Reactions In Solids. Miley, G. H. and P. Shrestha in Tenth International Conference on Cold Fusion. 2003. Cambridge, MA.

Journals and publications

• Infinite Energy - one of the original periodicals dedicated to cold fusion and new energy
• New Energy Times - site that focuses on the latest advances in the field of cold fusion
• Cold Fusion Times - quarterly journal about cold fusion

Websites and repositories

• Recent papers on cold fusion listed on New Energy Times
• LENR-CANR Low Energy Nuclear Reactions — Chemically Assisted Nuclear Reactions - information and links on cold fusion research (mainly pro-cold fusion), and an online library of over 500 full-text papers from the peer-reviewed literature and conference proceedings
• Britz's cold nuclear fusion bibliography - an overview and review of almost all available publications about cold nuclear fusion
• Cold Fusion — 17 Years and Heating Up - directory of cold fusion resources compiled by FreeEnergyNews.com
• L. Kowalski's web site - a collection of commentaries on cold fusion research from a physics teacher
• International Society for Condensed Matter Nuclear Science - website of the ISCMNS
• JL Naudin's web site - the CFR project, a High Temperature Plasma Electrolysis based on the Tadahiko Mizuno work from the Hokkaido University (Japan)
• Cold Fusion overview - John Coviello provides an introductory synopsis for new encyclopedic entry at PESWiki.com.
• A Cold Fusion primer, in English and Italian

News

1980s

• Elation Should Be Tempered Until Jury Has Examined Experiments The Financial Post (May 1 1989)
• "Physicists Debunk Claim Of a New Kind of Fusion" - The New York Times (May 3 1989)
• "PFC results said to deal blow to fusion claims" - MIT Tech (May 9 1989) - Early cold fusion claims set straight by work in their Plasma Fusion Center

1990s

• Whatever Happened to Cold Fusion? The American Scholar (Late 1994)
• What If Cold Fusion Is Real? Wired, (November 1998)
• Whatever happened to cold fusion? Physics World, (March 1999)
• The War Against Cold Fusion - What's really behind it? SF Gate - (May 1999)

2000s

• Arthur C Clarke demands cold fusion rethink BBC News (September 2000) See also:
• Warming up to Cold Fusion Washington Post Magazine (November 2004)
• ICCF-11 Overview With Links to Presentations International Society for Condensed Matter Nuclear Science (November 2004)
• U.S. review rekindles cold fusion debate Nature - (December 2004)
• The 2005 Cold Fusion Colloquium Cold Fusion Times (May 2005) - Public gathering of cold fusion researchers at MIT
• Cold-Fusion Believers Work On, Even as Mainstream Science Gives Them the Cold Shoulder Salt Lake City Weekly (October 2005)
• ICCF-12 Overview With Links to Presentations International Society for Condensed Matter Nuclear Science (December 2005)
• Does fusion scientist 'hold the secret'? Deseret Morning News (March 2006)
• Fleischmann Joins D2Fusion to Develop Cold Fusion Heaters Pure Energy Systems News (March 2006)

Bibliography

• Krivit, Steven ; Winocur, Nadine. The Rebirth of Cold Fusion: Real Science, Real Hope, Real Energy. Los Angeles, CA, Pacific Oaks Press, 2004 ISBN 0976054582.
• Beaudette, Charles. Excess Heat: Why Cold Fusion Research Prevailed, 2nd. Ed. South Bristol, ME, Oak Grove Press, 2002. ISBN 0967854830.
• Park, Robert L. Voodoo Science: The Road from Foolishness to Fraud. New York: Oxford University Press, 2000. ISBN 0195135156.
• Mizuno, Tadahiko. Nuclear Transmutation: The Reality of Cold Fusion. Concord, N.H.: Infinite Energy Press, 1998. ISBN 1892925001.
• Taubes, Gary. Bad Science: The Short Life and Weird Times of Cold Fusion. New York, N.Y. : Random House, 1993. ISBN 0394584562.
• Huizenga, John R. Cold Fusion: The Scientific Fiasco of the Century. Rochester, N.Y.: University of Rochester Press, 1992. ISBN 1878822071; ISBN 0198558171.
• Close, Frank E..Too Hot to Handle: The Race for Cold Fusion. Princeton, N.J. : Princeton University Press, 1991. ISBN 0691085919; ISBN 0140159266.
• Mallove, Eugene. Fire from Ice: Searching for the Truth Behind the Cold Fusion Furor. Concord, N.H.: Infinite Energy Press, 1991. ISBN 1892925028.

External links

Information:

• Energy Research Advisory Board, "Conclusions and recommendations"
• "Low Energy Nuclear Reactions - Chemically Assisted Nuclear Reactions". — Information and links from pro-cold fusion research.
• L. Kowalski's web site: an overview of the current state of cold fusion research from a physics teacher
• Britz's cold nuclear fusion bibliography: An extentisve overview and review of almost all available publications about cold nuclear fusion.

News:

• "Sound waves size up sonoluminescence". PhysicsWeb. February 2002.
• "Whatever happened to cold fusion?". Physics World. March 1999.
• "Fusion experiment disappoints". BBC News. July 25 2002
• "Cold Fusion Heats Up. CBC Science.
• DoE to review cold fusion Physics Today April 2004.
• Phys. Rev. E 69, 036109 (2004) "Additional evidence of nuclear emissions during acoustic cavitation", R. P. Taleyarkhan, J. S. Cho, C. D. West, R. T. Lahey, Jr., R. I. Nigmatulin, and R. C. Block.

• Nuclear fusion
• Protoscience
• Pseudoscience