Article snapshot taken from Wikipedia with creative commons attribution-sharealike license.
Give it a read and then ask your questions in the chat.
We can research this topic together.
|status= In production<ref>{{Cite web|url=https://helihub.com/2020/02/21/robinson-production-falls-off-a-cliff-in-2019/|title = Robinson production falls off a cliff in 2019|date = 21 February 2020}}</ref>
|status= In production<ref>{{Cite web|url=https://helihub.com/2020/02/21/robinson-production-falls-off-a-cliff-in-2019/|title = Robinson production falls off a cliff in 2019|date = 21 February 2020}}</ref>
The '''Robinson R22''' is a two-seat, two-bladed, single-engined, light utility ] manufactured by ]. It was designed in 1973 by ], and has been in production since 1979.
The '''Robinson R22''' is a two-seat, two-bladed, single-engined, light utility ] manufactured by ]. It was designed in 1973 by ], and has been in production since 1979.
Line 26:
Line 23:
==Development==
==Development==
The majority of flight testing was performed at ] in ]. Flight testing and certification were performed in the late 1970s by test pilot ], and the R22 received FAA certification in March 1979.<ref>{{cite web |title= Aerospace Walk of Honor: "Tymczyszyn Bio" |url= http://www.cityoflancasterca.org/Index.aspx?page=196#tym |access-date= 1 April 2014 |url-status=dead|archive-url= https://web.archive.org/web/20140527215051/http://www.cityoflancasterca.org/index.aspx?page=196#tym |archive-date= 27 May 2014 }}</ref>
The majority of flight testing was performed at ] in ]. Flight testing and certification were performed in the late 1970s by test pilot ], and the R22 received FAA certification in March 1979.<ref>{{cite web |title= Aerospace Walk of Honor: "Tymczyszyn Bio" |url= http://www.cityoflancasterca.org/Index.aspx?page=196#tym |access-date= 1 April 2014 |url-status=dead|archive-url= https://web.archive.org/web/20140527215051/http://www.cityoflancasterca.org/index.aspx?page=196#tym |archive-date= 27 May 2014 }}</ref>
Due to relatively low acquisition and operating costs, the R22 has been popular as a primary rotorcraft trainer around the world, and as a livestock-management tool on large ]es in North America and ]s in ].
Due to relatively low acquisition and operating costs, the R22 has been popular as a primary rotorcraft trainer around the world, entry-level personal helicopter, and as a livestock-management tool on large ]es in North America and ]s in ].
The R22 has a very low-] rotor system<ref name="Greenspun">]. " {{Webarchive|url=https://web.archive.org/web/20140904141730/http://philip.greenspun.com/flying/robinson-r22 |date=2014-09-04 }}" March 2010. Accessed: 20 September 2014.</ref> and the control inputs are operated directly by push rods with no hydraulic assistance. Thus, its flight controls are very sensitive and require a light touch to avoid overcorrection, and students who master an R22 are usually well prepared to transition to heavier helicopters. Due to the specific training required by the low-inertia rotor system and a teetering main rotor, operation of the Robinson R22 or ] in the US requires a special endorsement by a certified flight instructor.<ref> {{webarchive|url=https://web.archive.org/web/20090220092255/http://ecfr.gpoaccess.gov/cgi/t/text/text-idx?c=ecfr&sid=40760189a03dfea0b501608f33820a45&rgn=div5&view=text&node=14:2.0.1.1.2&idno=14 |date=2009-02-20 }}</ref> Tip weights were added to the R22 to increase rotor inertia,<ref>{{Cite web |url=http://www.unicopter.com/0385.html |title=0385 |access-date=2011-02-05 |archive-url=https://web.archive.org/web/20110205232841/http://www.unicopter.com/0385.html |archive-date=2011-02-05 |url-status=live }}</ref> but the small rotor limits weight.<ref>Borrows, David A. {{Webarchive|url=https://web.archive.org/web/20110719020419/http://flighttraining.aopa.org/magazine/1998/March/199803_Features_Rotor_RPM_.html |date=2011-07-19 }} ''Flight Training'', March 1998. Accessed: February 2011.</ref>
The R22 has a very low-] rotor system<ref name="Greenspun">]. " {{Webarchive|url=https://web.archive.org/web/20140904141730/http://philip.greenspun.com/flying/robinson-r22 |date=2014-09-04 }}" March 2010. Accessed: 20 September 2014.</ref> and the control inputs are operated directly by push rods with no hydraulic assistance. Thus, its flight controls are very sensitive and require a light touch to avoid overcorrection, and students who master an R22 are usually well prepared to transition to heavier helicopters. Due to the specific training required by the low-inertia rotor system and a teetering main rotor, operation of the Robinson R22 or ] in the US requires a special endorsement by a certified flight instructor.<ref>{{Cite web|title=Special Federal Aviation Regulation No. 73|url=https://www.rhctraining.com/sfar-73/}}</ref> SFAR 73 includes discussion and training on energy management, mast bumping, low rotor RPM (blade stall), low G hazards and rotor RPM decay. Tip weights were added to the R22 to increase rotor inertia,<ref>{{Cite web |url=http://www.unicopter.com/0385.html |title=0385 |access-date=2011-02-05 |archive-url=https://web.archive.org/web/20110205232841/http://www.unicopter.com/0385.html |archive-date=2011-02-05 |url-status=live }}</ref> but the small rotor limits weight.<ref>Borrows, David A. {{Webarchive|url=https://web.archive.org/web/20110719020419/http://flighttraining.aopa.org/magazine/1998/March/199803_Features_Rotor_RPM_.html |date=2011-07-19 }} ''Flight Training'', March 1998. Accessed: February 2011.</ref>
The first R22 sold, October, 1979, S/N 003, N1010WR, was purchased by Pacific Wing and Rotor, Inc., represented by Tim Tucker who later became a ] and chief instructor for Robinson. S/N 001 was crashed in the ocean during certification testing due to a failure of the casting that mates the tail rotor gearbox and stabilizing fins to the conical monocoque aluminum tail boom and S/N 002 was used to complete the FAA certification.<ref>{{Cite web|title=Tim Tucker's Helicopter World|url=https://www.timtuckershelicopterworld.com/}}</ref> S/N 002, N32AD, is still owned by Robinson and is now preserved in the collection of the Smithsonian Air and Space Museum.
By 2019, 4800 R22 had been made.<ref name=total19>{{Cite web |title=The little copter that could: The Robinson R22 |url=https://verticalmag.com/features/the-little-copter-that-could-the-robinson-r22/ |access-date=2024-05-04 |website=Vertical Mag |language=en-US}}</ref>
===R22 cost===
===R22 cost===
{{Trivia|section|date=April 2023}}
{{Trivia|section|date=April 2023}}
Initially, Robinson projected the sale price in 1977 to be US$18-19,000. However, 3 months prior to initial deliveries starting in 1979, the price was raised to US$33,850. Per Tim Tucker, the sale price for S/N 003 including options was US$48,000, {{USDCY|48000|1979}}.<ref>{{cite web|title=Robinson R22 - History and Technical Description|url=https://www.heli-archive.ch/en/helicopters/in-depth-articles/robinson-22}}</ref>
The R22 has a suggested retail price of $318,000 (ex factory price, USA)<ref>{{cite web|title=R22 Pricelist|url=https://robinsonheli.com/wp-content/uploads/2021/01/r22_pricelist_15_jan_2021.pdf|publisher=Robinson Helicopter Company|access-date=15 January 2021}}</ref> and the value on the second-hand market is dependent on component time in service.{{cn|date=April 2023}}
Operatingcost,perthefactory,<refname="R22 OperatingCosts">{{cite web|title=R22 Operating Costs|url=https://robinsonheli.com/wp-content/uploads/2021/01/r22_eoc_jan_2021.pdf|publisher=Robinson Helicopter Company|access-date=23March2021}}</ref> including insurance, reserve for overhaul, and direct operating cost (fuel, oil, inspections, unscheduled maintenance) is US$163.71/hr.{{cn|date=April2023}}
As of 15 January 2024, the R22 Beta II has a suggested retail price of US$375,000 (ex-factory price, USA)<ref>{{cite web|title=R22 Pricelist|url=https://robinsonheli.com/wp-content/uploads/2024/01/r22-pricelist-15-january-2024.pdf|publisher=Robinson Helicopter Company|access-date=29 February 2024}}</ref> and the value on the second-hand market is dependent on component time in service.<ref>{{cite web|title=The Official Helicopter Blue Book|url=https://www.helivalues.com/helicopter/values/information/prices/robinson-r22-beta-ii}}</ref> The estimated operating cost of a R22 Beta II, per the factory, including insurance, reserve for overhaul, and direct operating cost (fuel, oil, inspections, unscheduled maintenance) is US$189.87/hr when flown 500 hours per year.<ref name="R22 Operating Costs">{{cite web|title=R22 Operating Costs|url=https://robinsonheli.com/wp-content/uploads/2024/01/r22-eoc-15-january-2024.pdf|publisher=Robinson Helicopter Company|access-date=29 February 2024}}</ref>
Depreciation on a Robinson R22 is negligible, as freshly overhauled R22s typically sell for more than the original cost.<ref name="R22 Operating Costs">{{cite web|title=R22 Operating Costs|url=https://robinsonheli.com/wp-content/uploads/2021/01/r22_eoc_jan_2021.pdf|publisher=Robinson Helicopter Company|access-date=23 March 2021}}</ref> However, a provision per flown hour must be made for a "reserve for overhaul" cost, currently estimated at US$72.21 per hour.<ref name="R22 Operating Costs"/>
Depreciation on a Robinson R22 is negligible, as freshly overhauled R22s typically sell for more than the original cost.<ref name="R22 Operating Costs"/> However, a provision per flown hour must be made for a "reserve for overhaul" cost, currently estimated at US$90.42 per hour.<ref name="R22 Operating Costs"/>
==Design==
===Design===
]
]
Line 52:
Line 53:
]
]
Instead of floor-mounted cyclic sticks between the pilot's knees, the R22 uses a unique teetering "T-Bar" control connected to a stick that emerges from the console between the seats. This makes it easier for occupants to enter and exit the cabin and reduces chances for injury in the event of a hard landing. The teetering bar has a hand grip on both sides that hangs down between the pilots' legs. Thus, if teetered to the right, the right-side pilot would be flying and the left grip would be about 12 inches above the left pilot's lap. R22 flight instructors quickly learn how to fly with their hand in the air. The left part of the bar, left collective control, and left tail-rotor pedals can be removed if the left-seat occupant is not certified to fly theR22orifthe space is needed for technical or observer duties. A floor-mounted, foot-activated push-to-talk switch facilitates intercom communications for the left-seat occupant, although some later models may be equipped with a voice-activated intercom system.
Instead of floor-mounted cyclic sticks between the pilot's knees, the R22 uses a unique teetering "T-Bar" control connected to a stick that emerges from the console between the seats. This makes it easier for occupants to enter and exit the cabin and reduces chances for injury in the event of a hard landing. The teetering bar has a hand grip on both sides that hangs down between the pilots' legs. Thus, if teetered to the right, the right-side pilot would be flying and the left grip would be about 12 inches above the left pilot's lap. R22 flight instructors quickly learn how to fly with their hand in the air. The left part of the bar, left collective control, and left tail-rotor pedals can be removed if the left-seat occupant is not going to fly such as a non-rated pilot. A floor-mounted, foot-activated push-to-talk switch facilitates intercom communications for the left-seat occupant, although some later models may be equipped with a voice-activated intercom system.
The ] system consists of a two-bladed main rotor and two-bladed antitorque rotor on the tail, each equipped with a teetering hinge. The main rotor is also equipped with two coning hinges. Collective and cyclic pitch inputs to the main rotor are transmitted through pushrods and a conventional ] mechanism. Control inputs to the preconed tail rotor are transmitted through a single pushrod inside the aluminum tail cone.
The ] system consists of a two-bladed main rotor and two-bladed antitorque rotor on the tail, each equipped with a teetering hinge. The main rotor rotates with the starboard (right) side blade moving forward. The main rotor is also equipped with two coning hinges. Collective and cyclic pitch inputs to the main rotor are transmitted through pushrods and a conventional ] mechanism. Control inputs to the tail rotor are transmitted through a single pushrod inside the aluminum tail cone.
To ease the pilot's workload, a mechanical throttle correlator adjusts the throttle as the ] control is raised or lowered. The pilot needs to make only small adjustments by twisting the throttle grip on the collective throughout the flight regimen. Later models are also equipped with an electronic ], which works to maintain engine speed within normal operating limits (between 97 and 104%); the governor is active when the engine is running only above 80% of socified{{what|date=June 2023}} speed, and is most effective in normal flight conditions. The governor can be switched on or off with a toggle switch located at the end of the pilot's collective pitch control. When the governor is not engaged, a yellow caution light glows on the instrument panel.<ref name="RTR 061">{{cite book | last =Robinson Helicopter Company | title =R22 Pilot's Operating Handbook and FAA Approved Rotorcraft Flight Manual | date = 1996-10-22 | pages = 2–2, 7–17}}</ref>
To ease the pilot's workload, a mechanical throttle correlator adjusts the throttle as the ] control is raised or lowered. The pilot needs to make only small adjustments by twisting the throttle grip on the collective throughout the flight regime. Later models are also equipped with an electronic ], which works to maintain engine speed within normal operating limits (between 97 and 104%); the governor is active when the engine is running only above 80% and is most effective in normal flight conditions. Robinson introduced the governor to ease pilot workload and to reduce instances of main rotor stall due to low rotor RPM. The governor can be switched on or off with a toggle switch located at the end of the pilot's collective pitch control. When the governor is not engaged, a yellow caution light glows on the instrument panel.<ref name="RTR 061">{{cite book | last =Robinson Helicopter Company | title =R22 Pilot's Operating Handbook and FAA Approved Rotorcraft Flight Manual | date = 1996-10-22 | pages = 2–2, 7–17}}</ref>
===Powerplant===
===Powerplant===
Line 62:
Line 63:
]
]
The R22 uses a horizontally mounted ] (O-360-J2A on the Beta II), ], ], ], ]-equipped, ]. It is fueled with 100LL grade aviation gasoline. Cooling is provided through a direct-drive, ] cooling fan. At sea level, it is derated, or operated at less than maximum power, which has been attributed to the company wishing for the power unit to maintain the same performance at sea level as it does at altitude. As the air becomes thinner with increasing altitude, maximum available horsepower decreases, reaching a point where the throttle can be completely open and rotor speed is controlled by ] position. By derating the engine at sea level, the R22 achieves acceptable high-altitude performance without use of ] or ], thus saving the weight, cost, complexity, unreliability, and shortened engine life of a ] system.
The R22 uses a horizontally mounted ] (O-360-J2A on the Beta II), ], ], ], ]-equipped, ]. It is fueled with 100LL grade aviation gasoline. JTI Air Holdings, Inc., offers an STC allowing use of 91+ octane non-ethanol automotive gasoline.<ref>{{cite web|title=JTI Air Holdings, Inc. STC for auto gas|url=https://www.pprune.org/archive/index.php/t-242002.html}}</ref> Cooling is provided through a direct-drive, ] cooling fan. At sea level, it is derated, or operated at less than maximum power, which has been attributed to the company wishing for the power unit to maintain the same performance at sea level as it does at altitude.<ref>{{cite web|title=Unlocking the Mysteries of Robinson's Derated Engines|date=8 May 2020 |url=https://www.timtuckershelicopterworld.com/post/unlocking-the-mysteries-of-robinson-s-derated-engines}}</ref> As the air becomes thinner with increasing altitude, maximum available horsepower decreases, reaching a point where the throttle can be completely open and rotor speed is controlled by ] position. By derating the engine at sea level, the R22 achieves acceptable high-altitude performance without use of ] or ], thus saving the weight, cost, complexity, unreliability, and shortened engine life of a ] system.
A ] is used to provide the air-fuel mixture. Carbureted engines are susceptible to carburetor icing, a condition most likely to occur in conditions of a low 11 °C (20 °F) difference <!-- DO NOT use Misplaced Pages's convert function, as this is a DIFFERENCE value, so 20 deg F NOT 52 deg F --> between the outside air temperature and ] (the "dew point spread"), as well as visible signs of moisture in the atmosphere. Icing can lead to loss of engine power, and if not corrected, total shutdown of the engine. A carburetor heat control is used to supply heated air to the carburetor; this can prevent or cure icing, but also causes a reduction in engine power output because hot air is less dense, enriching the fuel-air mixture. The carburetor heat control is a simple plunger-type control mounted on the center console near the collective pitch control lever. Pulling the control up slides a gate valve near the carburetor that admits warm air from a scoop on the exhaust system. The R22 employs a carburetor air temperature gauge, marked to indicate temperatures conducive to icing. The Beta II version of the R22 also includes a "carburetor heat assist", which automatically applies carburetor heat when the collective lever is lowered below a certain point. When icing conditions are present, carburetor heat is required to prevent icing around the butterfly valve from the pressure drop at that point. As the carburetor air temperature (CAT) indicator does not read correctly below 18 ] (457 mm Hg) of intake manifold air pressure, icing conditions require applying full carburetor heat below 18 in Hg of manifold pressure. A placard indicating this requirement is located on the CAT indicator and in the pilot's operating handbook.
A ] is used to provide the air-fuel mixture. Carbureted engines are susceptible to carburetor icing, a condition most likely to occur in conditions of a low 11 °C (20 °F) difference <!-- DO NOT use Misplaced Pages's convert function, as this is a DIFFERENCE value, so 20 deg F NOT 52 deg F --> between the outside air temperature and ] (the "dew point spread"), as well as visible signs of moisture in the atmosphere. Icing can lead to loss of engine power, and if not corrected, total shutdown of the engine. A carburetor heat control is used to supply heated air to the carburetor; this can prevent or cure icing, but also causes a reduction in engine power output because hot air is less dense, enriching the fuel-air mixture. The carburetor heat control is a simple plunger-type control mounted on the center console near the collective pitch control lever. Pulling the control up slides a gate valve near the carburetor that admits warm air from a scoop on the exhaust system. The R22 employs a carburetor air temperature gauge, marked to indicate temperatures conducive to icing. The Beta II version of the R22 also includes a "carburetor heat assist", which automatically applies carburetor heat when the collective lever is lowered below a certain point. When icing conditions are present, carburetor heat is required to prevent icing around the butterfly valve from the pressure drop at that point. As the carburetor air temperature (CAT) indicator does not read correctly below 18 ] (457 mm Hg) of intake manifold air pressure, icing conditions require applying full carburetor heat below 18 in Hg of manifold pressure. A placard indicating this requirement is located on the CAT indicator and in the pilot's operating handbook.
Line 69:
Line 70:
A one-way ] is built into the center of the upper sheave to allow the rotor system to continue to rotate in the event of engine failure, allowing the R22 to enter ] and land in a controlled manner. Because the main rotor has very little mass and inertia, autorotation in an R22 requires careful and proper execution to assure a successful outcome. Much time is spent in training practicing various types of autorotation. Target speed in an autorotation is {{convert|65|kn|km/h|abbr=on}} and the glide ratio is approximately 4:1 in maximum-glide configuration.
A one-way ] is built into the center of the upper sheave to allow the rotor system to continue to rotate in the event of engine failure, allowing the R22 to enter ] and land in a controlled manner. Because the main rotor has very little mass and inertia, autorotation in an R22 requires careful and proper execution to assure a successful outcome. Much time is spent in training practicing various types of autorotation. Target speed in an autorotation is {{convert|65|kn|km/h|abbr=on}} and the glide ratio is approximately 4:1 in maximum-glide configuration.
===Ground handling===
]
R22’s are equipped with wheel mounts toward the rear of the skids, one on each side, for attachment of removable wheels. The wheels must be removed prior to flight. These brackets are slightly behind the helicopter center of gravity so when the wheels are installed, the helicopter sits nose low. The wheel assembly has a pivot pin which is inserted into the skid-mounted bracket and then rotated over center to lift the rear of the skids about 2 inches leaving the front of the skids on the ground. The helicopter can be moved by pulling down on the tail to lift the front of the skids off the ground. One person can move the helicopter though this is difficult over any distance or on a sloped surface. Another person can help by pushing on the bracing behind the engine.
R22’s with flotation attached to the skids such as the Mariner or Mariner II must have wheels installed under the skids as the bracket is not accessible.
R22’s manufactured after 1991 include a ¾” diameter tow ball mounted on the bottom of the fuselage, near the front and offset slightly to the left. A tow cart or tug can be engaged with the ball and then used to lift the front of the helicopter to clear the skids from the ground after the wheels are installed and rotated to lift the rear of the skids. This makes it possible for a single person to move the helicopter, even over significant distances or not-level surfaces.
Tow carts are available with a variety of features. There exist manual versions which place the ball mating device behind the wheels so the operator engages the ball then pushes down on the handle to lift the nose. Others provide a repurposed car-style hydraulic jack to lift the nose. Others provide an electric jack.
Tow carts are available with no motive power, a gas engine or one or two electric motors operated from one or two batteries. Some of the non-powered tow carts are set up to be towed such as behind a golf cart or quad cycle. One manufacturer offered a modified pallet jack.
The other option for ground handling is a landing platform which is large enough for the helicopter to safely land on, has wheels underneath and can be towed between the hangar and the take-off location. These are heavy and must be towed with a vehicle. R22’s are light enough to move they are rarely loaded onto platforms.
===Transport===
===Transport===
Line 76:
Line 92:
==Variants==
==Variants==
]
]
;R22
;R22
:The initial production version, it is powered by a Lycoming O-320-A2B or A2C piston engine.
:The initial production version, it is powered by a Lycoming O-320-A2B or A2C piston engine.
Line 86:
Line 102:
:Fitted with a more powerful engine, it is powered by a Lycoming O-320-B2C piston engine.
:Fitted with a more powerful engine, it is powered by a Lycoming O-320-B2C piston engine.
;R22 Beta II
;R22 Beta II
:Fitted with a more powerful engine, it is powered by a Lycoming O-360-J2A piston engine.
:]Fitted with a more powerful engine, it is powered by a Lycoming O-360-J2A piston engine.
;R22 Beta II Police
;R22 Beta II Police
:This police patrol version is equipped with a searchlight and loudspeaker.
:This police patrol version is equipped with a searchlight and loudspeaker.
Line 111:
Line 127:
The R22 is operated by many private individuals, companies, and flying clubs. In Australia, where 489 R22s were registered as of mid-2011, a survey found that 62% of the fleet's flying time was in ] operations, while 13% of hours were spent in training pilots. Many broadcasters used the R22 until the mid-1990s, when the financial landscape of radio broadcasting in the U.S. changed due to deregulation of the industry.<ref>{{cite journal |date=July–August 2011 |title=Stockhorse of the sky: the Robinson R22 |journal= Flight Safety Australia |issue= 81 |pages=14–15 |publisher=] |editor1-first=Margo |editor1-last=Marchbank |issn=1325-5002 }}</ref>
The R22 is operated by many private individuals, companies, and flying clubs. In Australia, where 489 R22s were registered as of mid-2011, a survey found that 62% of the fleet's flying time was in ] operations, while 13% of hours were spent in training pilots. Many broadcasters used the R22 until the mid-1990s, when the financial landscape of radio broadcasting in the U.S. changed due to deregulation of the industry.<ref>{{cite journal |date=July–August 2011 |title=Stockhorse of the sky: the Robinson R22 |journal= Flight Safety Australia |issue= 81 |pages=14–15 |publisher=] |editor1-first=Margo |editor1-last=Marchbank |issn=1325-5002 }}</ref>
=== Military and GovernmentOperators ===
=== Military and government operators ===
;{{CRO}}
;{{CRO}}
*]<ref>{{cite web | url=https://www.helis.com/database/org/Croatian-Police/cn | title=Policija Fleet }}</ref>
*]<ref>{{cite web | url=https://www.helis.com/database/org/Croatian-Police/cn | title=Policija Fleet }}</ref>
Line 120:
Line 136:
== Accidents and incidents ==
== Accidents and incidents ==
Since the R22 received FAA certification in March 1979, Robinson has delivered 4620 R22 helicopters. The R22 had 182 fatal accidents between March 1979 and June 2010 from a total of 1230 incidents. In late 1981, the R22 had its type certificate temporarily revoked by the Federal Aviation Administration due to delamination of a main rotor blade. The cause of the delamination was determined to be contamination of one of the bonded parts during a priming operation performed at an outside vendor. In response, Robinson Helicopter Company instituted stringent quality procedures and requirements, and replaced all main rotor blades on the fleet of 33 helicopters in service at the time.<ref>Krauss, Barbara. (1986, July/August). ''Robinson Helicopter: Number two and trying harder. Vertiflite, Volume 32'', p 24</ref>
Since the R22 received FAA certification in March 1979, Robinson has delivered 4,800 R22 helicopters up to 2019.<ref>{{Cite web |title=The little copter that could: The Robinson R22 |url=https://verticalmag.com/features/the-little-copter-that-could-the-robinson-r22/ |access-date=2024-05-04 |website=Vertical Mag |language=en-US}}</ref> The R22 had 182 fatal accidents between March 1979 and June 2010 from a total of 1,230 incidents. In late 1981, the R22 had its type certificate temporarily revoked by the Federal Aviation Administration due to delamination of a main rotor blade. The cause of the delamination was determined to be contamination of one of the bonded parts during a priming operation performed at an outside vendor. In response, Robinson Helicopter Company instituted stringent quality procedures and requirements, and replaced all main rotor blades on the fleet of 33 helicopters in service at the time.<ref>Krauss, Barbara. (1986, July/August). ''Robinson Helicopter: Number two and trying harder. Vertiflite, Volume 32'', p 24</ref>
In the early 1980s, the R22 experienced a number of student-pilot related accidents due to the R22's use as a primary flight trainer. Believing the number of accidents was the result of insufficient training and lax standards, Robinson established the Robinson Pilot Safety Course in 1982 to educate Certified Flight Instructors transitioning from larger helicopters to the new, smaller R22.<ref>Ells, Steven W. (2007, June 1) ''The highest standards: Robinson Helicopter aims for excellence. AOPA Pilot''.</ref> After the introduction of the Robinson Pilot Safety Course, the rate of fatal R22 accidents declined from 3.7 per 100,000 flight hours in 1983 to 0.97 per 100,000 flight hours for the 12 months preceding July 1995.<ref>Campbell, J.R. "Zoom". (1995, October) Witch hunt extraordinaire. ''US Aviator'' 8-16.</ref> Robinson's statistics show the rate of fatal R22 accidents per 100,000 flight hours fell from 6.0 in 1982 to 0.7 in 1997.<ref>Robinson Helicopter Company. (2012, Spring). ''Robinson safety class turns thirty. Robinson News, Volume 18, Issue 1'', p. 3.</ref> As of 2012, more than 17,000 students have gone through the course.<ref>Moorman, Robert. (2013, May/June). ''The house that Frank built. Vertiflite, Volume 59'', p. 25</ref>
In the early 1980s, the R22 experienced a number of student-pilot related accidents due to the R22's use as a primary flight trainer. Believing the number of accidents was the result of insufficient training and lax standards, Robinson established the Robinson Pilot Safety Course in 1982 to educate Certified Flight Instructors transitioning from larger helicopters to the new, smaller R22.<ref>Ells, Steven W. (2007, June 1) ''The highest standards: Robinson Helicopter aims for excellence. AOPA Pilot''.</ref> After the introduction of the Robinson Pilot Safety Course, the rate of fatal R22 accidents declined from 3.7 per 100,000 flight hours in 1983 to 0.97 per 100,000 flight hours for the 12 months preceding July 1995.<ref>Campbell, J.R. "Zoom". (1995, October) Witch hunt extraordinaire. ''US Aviator'' 8-16.</ref> Robinson's statistics show the rate of fatal R22 accidents per 100,000 flight hours fell from 6.0 in 1982 to 0.7 in 1997.<ref>Robinson Helicopter Company. (2012, Spring). ''Robinson safety class turns thirty. Robinson News, Volume 18, Issue 1'', p. 3.</ref> As of 2012, more than 17,000 students have gone through the course.<ref>Moorman, Robert. (2013, May/June). ''The house that Frank built. Vertiflite, Volume 59'', p. 25</ref>
On April 11, 2024 a Robinson R22 helicopter of the ] crashed near a public market in Cavite City in the Philippines while on a training flight, killing its two pilots. It was the last R22 model helicopter in the inventory of the Philippine Navy.<ref>{{Cite news |title=2 dead in Navy chopper mishap near Cavite City market |language=en-US |newspaper=] |url=https://www.gmanetwork.com/news/topstories/regions/903322/2-dead-in-navy-chopper-mishap-near-cavite-city-market/story/}}</ref>
==Specifications (R22)==
==Specifications (R22)==
Line 205:
Line 223:
* ]
* ]
|lists=
|lists=
*]
|see also=
|see also=
}}
}}
the governor is active when the engine is running only above 80% of socified speed, and is most effective in normal flight conditions.
The majority of flight testing was performed at Zamperini Field in Torrance, California. Flight testing and certification were performed in the late 1970s by test pilot Joseph John "Tym" Tymczyszyn, and the R22 received FAA certification in March 1979.
Due to relatively low acquisition and operating costs, the R22 has been popular as a primary rotorcraft trainer around the world, entry-level personal helicopter, and as a livestock-management tool on large ranches in North America and cattle stations in Australia.
The R22 has a very low-inertia rotor system and the control inputs are operated directly by push rods with no hydraulic assistance. Thus, its flight controls are very sensitive and require a light touch to avoid overcorrection, and students who master an R22 are usually well prepared to transition to heavier helicopters. Due to the specific training required by the low-inertia rotor system and a teetering main rotor, operation of the Robinson R22 or R44 in the US requires a special endorsement by a certified flight instructor. SFAR 73 includes discussion and training on energy management, mast bumping, low rotor RPM (blade stall), low G hazards and rotor RPM decay. Tip weights were added to the R22 to increase rotor inertia, but the small rotor limits weight.
The first R22 sold, October, 1979, S/N 003, N1010WR, was purchased by Pacific Wing and Rotor, Inc., represented by Tim Tucker who later became a test pilot and chief instructor for Robinson. S/N 001 was crashed in the ocean during certification testing due to a failure of the casting that mates the tail rotor gearbox and stabilizing fins to the conical monocoque aluminum tail boom and S/N 002 was used to complete the FAA certification. S/N 002, N32AD, is still owned by Robinson and is now preserved in the collection of the Smithsonian Air and Space Museum.
Initially, Robinson projected the sale price in 1977 to be US$18-19,000. However, 3 months prior to initial deliveries starting in 1979, the price was raised to US$33,850. Per Tim Tucker, the sale price for S/N 003 including options was US$48,000, ($201,508 in 2023).
As of 15 January 2024, the R22 Beta II has a suggested retail price of US$375,000 (ex-factory price, USA) and the value on the second-hand market is dependent on component time in service. The estimated operating cost of a R22 Beta II, per the factory, including insurance, reserve for overhaul, and direct operating cost (fuel, oil, inspections, unscheduled maintenance) is US$189.87/hr when flown 500 hours per year.
Depreciation on a Robinson R22 is negligible, as freshly overhauled R22s typically sell for more than the original cost. However, a provision per flown hour must be made for a "reserve for overhaul" cost, currently estimated at US$90.42 per hour.
Design
Robinson R22 hovering
The R22 is a light, two-place, single reciprocating-engined helicopter, with a semirigid, two-bladed main rotor and a two-bladed tail rotor. The main rotor has a teetering hinge and two coning hinges. The tail rotor has only a teetering hinge.
The normal production variant has skid landing gear. The Mariner version, no longer manufactured, provided floats. Wheeled gear is not available.
The basic structure is welded chromoly steel tubing. The forward fuselage is made of fiberglass and aluminum with a Plexiglas canopy. The tailcone and vertical and horizontal stabilizers are aluminum. It has an enclosed cabin with side-by-side seating for a pilot and passenger. The doors may be removed for flight, as is often done for photographic flights, interior cooling in high temperatures, or a 10.4 lb weight saving.
The first version was produced as the R22, followed by the R22 HP, R22 Alpha, R22 Beta, and R22 Beta II. Superficially, the aircraft appear similar. The R22 HP was fitted with a 160 bhp Lycoming O-320-B2C engine, an increase of 10 bhp (7.5 kW) over the original R22. The steel-tube frame on the R22 Alpha was modified by extending the aft landing-gear mounting points, giving it a slightly nose-down attitude on the ground and better matching of the skids to the ground in a low-altitude hover with two people on board. The R22 Beta added an engine speed governor (optional), rotor brake, and auxiliary fuel tank (optional). The battery was moved from below the instrument cluster to the engine compartment for better balance. The R22 has been offered as an instrument trainer version, with optional fixed floats as the R22 Mariner, and other special configurations for police work, electronic news gathering, and so on. The R22 Beta II received a larger Lycoming O-360 engine derated for sea-level operation. It allows greater altitudes for hovering in and out of ground effect (HIGE/HOGE). The R22 Beta II also made the engine speed governor standard and included a carburetor heat assist, which correlates adding carburetor heat with a decrease in collective control. Only the basic skid style is currently being sold.
Controls
The R22's cockpit, showing its unique "T-Bar" control
Instead of floor-mounted cyclic sticks between the pilot's knees, the R22 uses a unique teetering "T-Bar" control connected to a stick that emerges from the console between the seats. This makes it easier for occupants to enter and exit the cabin and reduces chances for injury in the event of a hard landing. The teetering bar has a hand grip on both sides that hangs down between the pilots' legs. Thus, if teetered to the right, the right-side pilot would be flying and the left grip would be about 12 inches above the left pilot's lap. R22 flight instructors quickly learn how to fly with their hand in the air. The left part of the bar, left collective control, and left tail-rotor pedals can be removed if the left-seat occupant is not going to fly such as a non-rated pilot. A floor-mounted, foot-activated push-to-talk switch facilitates intercom communications for the left-seat occupant, although some later models may be equipped with a voice-activated intercom system.
The helicopter rotor system consists of a two-bladed main rotor and two-bladed antitorque rotor on the tail, each equipped with a teetering hinge. The main rotor rotates with the starboard (right) side blade moving forward. The main rotor is also equipped with two coning hinges. Collective and cyclic pitch inputs to the main rotor are transmitted through pushrods and a conventional swashplate mechanism. Control inputs to the tail rotor are transmitted through a single pushrod inside the aluminum tail cone.
To ease the pilot's workload, a mechanical throttle correlator adjusts the throttle as the collective pitch control is raised or lowered. The pilot needs to make only small adjustments by twisting the throttle grip on the collective throughout the flight regime. Later models are also equipped with an electronic governor, which works to maintain engine speed within normal operating limits (between 97 and 104%); the governor is active when the engine is running only above 80% and is most effective in normal flight conditions. Robinson introduced the governor to ease pilot workload and to reduce instances of main rotor stall due to low rotor RPM. The governor can be switched on or off with a toggle switch located at the end of the pilot's collective pitch control. When the governor is not engaged, a yellow caution light glows on the instrument panel.
Powerplant
Lycoming O-320 mounted in a Robinson R22 BetaThe R22 is a simple and tight design.
The R22 uses a horizontally mounted Lycoming O-320 (O-360-J2A on the Beta II), flat-four, air-cooled, naturally aspirated, carburetor-equipped, reciprocating engine. It is fueled with 100LL grade aviation gasoline. JTI Air Holdings, Inc., offers an STC allowing use of 91+ octane non-ethanol automotive gasoline. Cooling is provided through a direct-drive, squirrel-cage cooling fan. At sea level, it is derated, or operated at less than maximum power, which has been attributed to the company wishing for the power unit to maintain the same performance at sea level as it does at altitude. As the air becomes thinner with increasing altitude, maximum available horsepower decreases, reaching a point where the throttle can be completely open and rotor speed is controlled by collective lever position. By derating the engine at sea level, the R22 achieves acceptable high-altitude performance without use of supercharging or turbocharging, thus saving the weight, cost, complexity, unreliability, and shortened engine life of a forced induction system.
A carburetor is used to provide the air-fuel mixture. Carbureted engines are susceptible to carburetor icing, a condition most likely to occur in conditions of a low 11 °C (20 °F) difference between the outside air temperature and dew point (the "dew point spread"), as well as visible signs of moisture in the atmosphere. Icing can lead to loss of engine power, and if not corrected, total shutdown of the engine. A carburetor heat control is used to supply heated air to the carburetor; this can prevent or cure icing, but also causes a reduction in engine power output because hot air is less dense, enriching the fuel-air mixture. The carburetor heat control is a simple plunger-type control mounted on the center console near the collective pitch control lever. Pulling the control up slides a gate valve near the carburetor that admits warm air from a scoop on the exhaust system. The R22 employs a carburetor air temperature gauge, marked to indicate temperatures conducive to icing. The Beta II version of the R22 also includes a "carburetor heat assist", which automatically applies carburetor heat when the collective lever is lowered below a certain point. When icing conditions are present, carburetor heat is required to prevent icing around the butterfly valve from the pressure drop at that point. As the carburetor air temperature (CAT) indicator does not read correctly below 18 in Hg (457 mm Hg) of intake manifold air pressure, icing conditions require applying full carburetor heat below 18 in Hg of manifold pressure. A placard indicating this requirement is located on the CAT indicator and in the pilot's operating handbook.
Power is transmitted from the engine to the drive system through drive belts. Originally, the R22 used four separate v-belts running on multigroove sheaves. This system proved problematic, as individual belts sometimes rolled over in their groove and fail. As a temporary measure, in 1982, R22 operators received a kit from Robinson that was installed in the cockpit and on the belt tension actuator, isolating the tensioning circuits and locking the clutch/drive system at take-off tension. The problem was ultimately solved by replacing the four individual v-belts with two dual v-belts. The upper, driven sheave is mounted on the main/tail rotor drive shaft incorporating flexible couplings, and is raised and lowered relative to the engine-mounted, driving sheave by means of a belt tension actuator. During shutdown, the actuator is used to lower the upper sheave to loosen the drive belts. For startup, the engine is started with the belts loose, allowing the engine to run without spinning the rotor system. Immediately after engine start, the clutch switch located in the cockpit is closed by the pilot, powering the actuator to slowly raise the upper sheave to flight position, which tightens the belts. The actuator is thereafter controlled by pressure-sensing column springs, automatically maintaining proper belt tension during flight as the belts wear and stretch. The shaft on which the upper sheave is mounted drives both the main and tail rotors; the main gear box delivers power to the main rotor shaft through a set of splash-lubricatedspiral bevel gears.
A one-way sprag clutch is built into the center of the upper sheave to allow the rotor system to continue to rotate in the event of engine failure, allowing the R22 to enter autorotation and land in a controlled manner. Because the main rotor has very little mass and inertia, autorotation in an R22 requires careful and proper execution to assure a successful outcome. Much time is spent in training practicing various types of autorotation. Target speed in an autorotation is 65 kn (120 km/h) and the glide ratio is approximately 4:1 in maximum-glide configuration.
Ground handling
Robinson Helicopter Tow Cart Connected to R22
R22’s are equipped with wheel mounts toward the rear of the skids, one on each side, for attachment of removable wheels. The wheels must be removed prior to flight. These brackets are slightly behind the helicopter center of gravity so when the wheels are installed, the helicopter sits nose low. The wheel assembly has a pivot pin which is inserted into the skid-mounted bracket and then rotated over center to lift the rear of the skids about 2 inches leaving the front of the skids on the ground. The helicopter can be moved by pulling down on the tail to lift the front of the skids off the ground. One person can move the helicopter though this is difficult over any distance or on a sloped surface. Another person can help by pushing on the bracing behind the engine.
R22’s with flotation attached to the skids such as the Mariner or Mariner II must have wheels installed under the skids as the bracket is not accessible.
R22’s manufactured after 1991 include a ¾” diameter tow ball mounted on the bottom of the fuselage, near the front and offset slightly to the left. A tow cart or tug can be engaged with the ball and then used to lift the front of the helicopter to clear the skids from the ground after the wheels are installed and rotated to lift the rear of the skids. This makes it possible for a single person to move the helicopter, even over significant distances or not-level surfaces.
Tow carts are available with a variety of features. There exist manual versions which place the ball mating device behind the wheels so the operator engages the ball then pushes down on the handle to lift the nose. Others provide a repurposed car-style hydraulic jack to lift the nose. Others provide an electric jack.
Tow carts are available with no motive power, a gas engine or one or two electric motors operated from one or two batteries. Some of the non-powered tow carts are set up to be towed such as behind a golf cart or quad cycle. One manufacturer offered a modified pallet jack.
The other option for ground handling is a landing platform which is large enough for the helicopter to safely land on, has wheels underneath and can be towed between the hangar and the take-off location. These are heavy and must be towed with a vehicle. R22’s are light enough to move they are rarely loaded onto platforms.
Transport
Robinson R22 helicopter on a trailer
The two-bladed rotor and the small size of the R22 make transporting the helicopter without blade folding or dismantling tasks possible. Transporting the R22 requires securing the tail boom and rotor blades to a truck or trailer bed, which must be torsionally rigid to prevent motion and stresses being applied to the helicopter during transportation. Take off and landing directly onto a trailer is possible.
Variants
Robinson R22 Alpha variant, built after 1983
R22
The initial production version, it is powered by a Lycoming O-320-A2B or A2C piston engine.
R22 HP
A higher-powered version, it has a 160 bhp Lycoming O-320-B2C piston engine.
R22 Alpha
This improved version, certified in 1983, is powered by a Lycoming O-320-B2C piston engine.
R22 Beta
Fitted with a more powerful engine, it is powered by a Lycoming O-320-B2C piston engine.
R22 Beta II
A R22 Beta IIFitted with a more powerful engine, it is powered by a Lycoming O-360-J2A piston engine.
R22 Beta II Police
This police patrol version is equipped with a searchlight and loudspeaker.
R22 Mariner
Designed for off-shore work, it is fitted with floats and a Lycoming O-320-B2C piston engine, and is limited to daylight operations when fitted with floats.
R22 Mariner II
Designed for off-shore work, it is fitted with floats and a Lycoming O-360-J2A piston engine, and is limited to daylight operations when fitted with floats.
R22 Police
Police version
R22 IFR
Designed for IFR training, it has a larger, 10-hole panel to accommodate additional instruments. It is not IFR certified, so training must be done with a safety pilot in VFR conditions.
The R22 is the basis for Boeing's Maverick military unmanned aerial vehicle helicopter, and its Renegade version. In 1999, Frontier Systems developed a remotely piloted R22, the Maverick. This aircraft, along with the company, was later acquired by Boeing Phantom Works. In 2003, the United States Navy purchased four aircraft, equipped with Wescam electro-optical/infrared systems.
Boeing then modified one of the Mavericks further, calling it the Renegade, under contract with the Defense Advanced Research Projects Agency as a research testbed to develop software for its A160 Hummingbird. The software system, known as the software enabled control (SEC) program, was developed by Boeing and teams from the University of California, Berkeley, Georgia Institute of Technology, and Massachusetts Institute of Technology, and was first flown on May 26, 2005. During the flight, the SEC assumed control of the aircraft to "execute autonomous maneuvering algorithms". The software allows the aircraft to autonomously select "optimal routes through a field of pop-up and known threats; flying low-level, terrain-hugging profiles to avoid detection; and determining safe landing zones using vision-based algorithms to process landing site imagery and terrain height information."
Operators
The R22 is operated by many private individuals, companies, and flying clubs. In Australia, where 489 R22s were registered as of mid-2011, a survey found that 62% of the fleet's flying time was in mustering operations, while 13% of hours were spent in training pilots. Many broadcasters used the R22 until the mid-1990s, when the financial landscape of radio broadcasting in the U.S. changed due to deregulation of the industry.
Since the R22 received FAA certification in March 1979, Robinson has delivered 4,800 R22 helicopters up to 2019. The R22 had 182 fatal accidents between March 1979 and June 2010 from a total of 1,230 incidents. In late 1981, the R22 had its type certificate temporarily revoked by the Federal Aviation Administration due to delamination of a main rotor blade. The cause of the delamination was determined to be contamination of one of the bonded parts during a priming operation performed at an outside vendor. In response, Robinson Helicopter Company instituted stringent quality procedures and requirements, and replaced all main rotor blades on the fleet of 33 helicopters in service at the time.
In the early 1980s, the R22 experienced a number of student-pilot related accidents due to the R22's use as a primary flight trainer. Believing the number of accidents was the result of insufficient training and lax standards, Robinson established the Robinson Pilot Safety Course in 1982 to educate Certified Flight Instructors transitioning from larger helicopters to the new, smaller R22. After the introduction of the Robinson Pilot Safety Course, the rate of fatal R22 accidents declined from 3.7 per 100,000 flight hours in 1983 to 0.97 per 100,000 flight hours for the 12 months preceding July 1995. Robinson's statistics show the rate of fatal R22 accidents per 100,000 flight hours fell from 6.0 in 1982 to 0.7 in 1997. As of 2012, more than 17,000 students have gone through the course.
On April 11, 2024 a Robinson R22 helicopter of the Philippine Navy crashed near a public market in Cavite City in the Philippines while on a training flight, killing its two pilots. It was the last R22 model helicopter in the inventory of the Philippine Navy.
Specifications (R22)
(These specifications are for the original R22, which is no longer in production. Later variants have different specifications.)
Data from Robinson R22 Pilot's Operating Handbook., R22 Introduction and Specifications
General characteristics
Crew: 1/2
Capacity: 1/0
Length: 28 ft 8 in (8.74 m)
Height: 8 ft 11 in (2.72 m)
Empty weight: 880 lb (399 kg)
Max takeoff weight: 1,370 lb (621 kg)
Fuel capacity:
Main tank total capacity: 16.9 US gal (14 imp gal; 64 L)
Optional auxiliary tank total capacity: 10.9 US gal (9 imp gal; 41 L)
Powerplant: 1 × Lycoming O-320-A2B or -A2C 4-cylinder air-cooled horizontally-opposed piston engine, 124 hp (92 kW)
.jpg)
.jpg)
