| Revision as of 20:27, 27 April 2006 editFresheneesz (talk | contribs)Extended confirmed users9,055 editsm →Importance of weight and speed← Previous edit | Revision as of 01:25, 29 April 2006 edit undoFresheneesz (talk | contribs)Extended confirmed users9,055 edits cutting unverifiable info - and moving it to discussion pageNext edit → | ||
| Line 3: | Line 3: | ||
| '''UniModal''' or '''SkyTran''' is a proposal by ] for a 160km/h (100mph) ] system using electric linear propulsion and a form of passive ] called ]. | '''UniModal''' or '''SkyTran''' is a proposal by ] for a 160km/h (100mph) ] system using electric linear propulsion and a form of passive ] called ]. | ||
| The UniModal design is significantly different from other PRT systems. |
The UniModal design is significantly different from other PRT systems. Vehicles are suspended from an overhead track and are aerodynamically streamlined. Also, the system uses passive magnetic levitation and is proposed to use ] to interact with riders. | ||
| The system is designed to have very few moving parts (for economic reasons), the main moving part being the vehicle itself. The promoters refer to the system as "solid state". However, wheels are present for use during starting and stopping, and the doors move, as well as any moving conveniences such as fans to air from heaters or air conditioning units. | The system is designed to have very few moving parts (for economic reasons), the main moving part being the vehicle itself. The promoters refer to the system as "solid state". However, wheels are present for use during starting and stopping, and the doors move, as well as any moving conveniences such as fans to air from heaters or air conditioning units. | ||
| Line 11: | Line 11: | ||
| ==Guideway== | ==Guideway== | ||
| Guideways would be mounted on poles about 30 feet above the ground |
Guideways would be mounted on poles about 30 feet above the ground. The guideways would be made of modular steel components, attached to a cemented foundations. In the past, the company has estimated a possible $1 million per mile once in mass production. | ||
| Although the guideways have been reported to be about ''one million dollars per mile'', more recent reports of about 2 million dollars per mile have been made. Currently, the company says they are claiming $10 million per mile, but say that the reason for this is to make their cost analysis seem more believable, and they hold that their actual estimates are still well below that amount. | |||
| ==Pods== | ==Pods== | ||
| Projected estimates: | |||
| * 10 feet long | |||
| ⚫ | * Running cost: $0.01 per mile (~ 200 mi/gallon) | ||
| * 200 pounds (passengerless) | |||
| * estimated cost: ~ $3000 | |||
| * Payload weight capacity: 700 pounds | |||
| ⚫ | * |
||
| ] | ] | ||
| Because SkyTran operates at higher speeds than other PRT designs, the pods are designed to be aerodynamically streamlined. Vehicals with lower air drag use less energy and produce less noise. The pod is designed to carry two people in tandem (one behind the other) for decreased air drag. The company plans to charge 10 cents per mile, about the cost of gas in a car. | |||
| The doors do not have handles (inside or out), but open automatically |
The doors do not have handles (inside or out), but open automatically. However, there is a door release mechanism on the outside of the pod to allow rescuers to open the door. | ||
| Resting pods sit on small wheels, but when the pods are accelerated to above around 2 mph, the pods are levitated by the Inductrack in the guideway. After slowing to below 2 mph, the wheels act as landing gear to support the pod. | Resting pods sit on small wheels, but when the pods are accelerated to above around 2 mph, the pods are levitated by the Inductrack in the guideway. After slowing to below 2 mph, the wheels act as landing gear to support the pod. | ||
| Pods would have a small battery, so that a pod could reach the next station and safely disembark its passenger even in complete system failure. | |||
| ==Semantics== | |||
| A ''Pod'' is the name of the vehicles in the UniModal system. The reasons for the name are psychological - people associate "''cars''" with traffic, insurance, crashes, and gas prices. The name ''pod'' is meant to reduce these connotations. | |||
| ''Portals'' are stair-structures where people get on an off pods. Since people associate the words "station" and "stop" with buses, trains, and long waits, the word ''portal'' is again used to avoid these connotations. | |||
| ''Guideways'' are the "tracks" that the pods travel on. This word is used in many PRT proposals, probably also for psychological reasons. | |||
| Many of these connections may be unconsciously thought of and for these reasons, new words have been created to describe a system in which these connections are not present. | |||
| ==Importance of weight and speed== | |||
| The advantage of a small vehicle is that it weighs less, and therefore requires less support - allowing a smaller, less expensive guideway. Also, smaller cars are cheaper to build and have less aerodynamic drag. Making pods twice the size would most probably increase the cost of the system more than 2 or 3 fold. The system is designed to relieve commuter congestion - the main reason that the average car in the U.S. carries 1.16 people. | |||
| One advantage of Unimodal's high speeds is that trips would be faster. Another important reason to have higher speeds is that higher speeds increase capacity - a singly pod could be used more times in, say, an hour. This is a factor in saving money because the only other ways to increase capacity are to build more guideways, or more vehicles. | |||
| ==System Description== | ==System Description== | ||
| Line 59: | Line 36: | ||
| The guideway is designed to accommodate a ''3D'' grid design. It is called ''3D'' because the guideway can be built under or over other things - especially other guideways. The main reason to have such a grid is to avoid intersections - guideways can cross over or under other parts of the guideway so that no stops are necessary - much like freeway overpasses allow the cars on the freeway to continue non-stop. | The guideway is designed to accommodate a ''3D'' grid design. It is called ''3D'' because the guideway can be built under or over other things - especially other guideways. The main reason to have such a grid is to avoid intersections - guideways can cross over or under other parts of the guideway so that no stops are necessary - much like freeway overpasses allow the cars on the freeway to continue non-stop. | ||
| ⚫ | Although the design suggests a guideway grid, the UniModal design permits guideways to be used in any configuration - such as a linear route system (like most train routes). | ||
| Ideally, Skytran/UniModal would be built in a grid configuration, where parallel guideways would be built one mile apart and portals would be build every mile along each guideway. This configuration would require a maximum 1/2 mile distance to the nearest portal, and an average distance of 800 feet (about a 3 minute walk at 3 mph walking speed). | |||
| ⚫ | Although a guideway grid |
||
| ==Decelerate - tracks, and brakes== | ==Decelerate - tracks, and brakes== | ||
| Like all PRT systems, vehicles exit the main guideway, then slow and then stop on deceleration |
Like all PRT systems, vehicles exit the main guideway, then slow and then stop on a deceleration guideway. This is analogous to the way cars exit a freeway, rather than remaining on the road). In this way, the main guideway can allow a constant speed. The design proposes that vehicles slow down to 20 mph on the deceleration guideway before actually making any turn. | ||
| For each 90 degree turn onto a guideway ] to the current guideway, there will be a deceleration track, turn track, and an acceleration guideway. Vehicles would exit the main guideway, then decelerate to 20 mph during the turn, and then accelerate back up to 100 mph to enter the main guideway again. This is analogous to the way cars exit a freeway, rather than remaining on the road). In this way, the main guideway can allow a constant speed. | |||
| Unimodal's braking would normally use ]s that convert the pod's ] back into electricity. However, the emergency brake would be a pad that presses against the inside of the steel rail, permitting fast emergency deceleration. The designers cite that a six ] (about 59 <math>m/s^2</math>) deceleration would be safe in the short period of time (about 3/4 of a second). The deceleration rate allows a vehicle traveling at 100 mph to stop in less than 17 meters (56 feet). | |||
| ⚫ | This |
||
| The UniModal design proposes using ]s for normal braking, but in an emergency, an emergency brake pad would press against the inside of the steel rail, permitting fast emergency deceleration. The designers propose a 6 ] maximum emergency braking deceleration. The pods would have seatbelts resembling race car seatbelts - with a wider belt and an X shaped harness - to be safer in emergencies. | |||
| Note that rail safety standards do not yet apply to PRT systems, and that this braking rate is considered unsafe for the general population by most authorities. | |||
| ⚫ | This deceleration rate was chosen in order to enable vehicles at 1-second headways to comply with rail safety standards requiring that a public transportation vehicle to be far enough behind the vehicle in front of it to make a ''complete'' stop in a very short distance. Note that rail safety standards do not yet apply to PRT systems, and that this braking rate is considered unsafe for the general population by most authorities. | ||
| Pods would travel 72 feet (or about 1/2 second) from each other. Since guideway supports are spaced 36 feet apart, only one pod can be between support posts at a time - meaning supports need only be able to support the weight of one pod. | |||
| ==Concerns about the disabled== | ==Concerns about the disabled== | ||
| Line 89: | Line 58: | ||
| ==Intercity vs intracity travel== | ==Intercity vs intracity travel== | ||
| * Intracity travel is travel within a city. |
* Intracity travel is travel within a city. Pods would travel at 100 mph on these lines. | ||
| * Intercity travel is travel between cities. |
* Intercity travel is travel between cities. Pods would travel at 150 mph on these lines. | ||
| Due to air resistance, the energy costs of a vehicle increase as the cube of its speed (approximately). Therefore the intercity plan (at 150 mph) has energy costs 3.4 times as much per mile as the intracity plan (100 mph). | Due to air resistance, the energy costs of a vehicle increase as the cube of its speed (approximately). Therefore the intercity plan (at 150 mph) has energy costs 3.4 times as much per mile as the intracity plan (100 mph). | ||
Revision as of 01:25, 29 April 2006
- For the use of "unimodal" in mathematics and statistics, see Unimodal function
UniModal or SkyTran is a proposal by Douglas Malewicki for a 160km/h (100mph) personal rapid transit system using electric linear propulsion and a form of passive magnetic levitation called Inductrack.
The UniModal design is significantly different from other PRT systems. Vehicles are suspended from an overhead track and are aerodynamically streamlined. Also, the system uses passive magnetic levitation and is proposed to use speech recognition to interact with riders.
The system is designed to have very few moving parts (for economic reasons), the main moving part being the vehicle itself. The promoters refer to the system as "solid state". However, wheels are present for use during starting and stopping, and the doors move, as well as any moving conveniences such as fans to air from heaters or air conditioning units.
Guideway
Guideways would be mounted on poles about 30 feet above the ground. The guideways would be made of modular steel components, attached to a cemented foundations. In the past, the company has estimated a possible $1 million per mile once in mass production.
Pods
Projected estimates:
- Running cost: $0.01 per mile (~ 200 mi/gallon)
Because SkyTran operates at higher speeds than other PRT designs, the pods are designed to be aerodynamically streamlined. Vehicals with lower air drag use less energy and produce less noise. The pod is designed to carry two people in tandem (one behind the other) for decreased air drag. The company plans to charge 10 cents per mile, about the cost of gas in a car.
The doors do not have handles (inside or out), but open automatically. However, there is a door release mechanism on the outside of the pod to allow rescuers to open the door.
Resting pods sit on small wheels, but when the pods are accelerated to above around 2 mph, the pods are levitated by the Inductrack in the guideway. After slowing to below 2 mph, the wheels act as landing gear to support the pod.
System Description
Hypothetical Trip
A person would approach a portal, walk up the stairs, and get in the ready pod. One would tell (verbally) the pod where they want to go, and the pod door would close automatically. The pod would then accelerate forward and up along the acceleration guideway, and would then merge with the main guideway at 100 mph. The pod would travel to the destination portal and would exit on the decelerate track, then start slowing down, and presently stop at an exit portal. The door would automatically open, and the person would get out and walk down the stairs. The pod would then close its door, and edge forward to wait in a line with other pods, all waiting for people to use the pod in front at the entrance portal.
Ideal Guideway Grid
The guideway is designed to accommodate a 3D grid design. It is called 3D because the guideway can be built under or over other things - especially other guideways. The main reason to have such a grid is to avoid intersections - guideways can cross over or under other parts of the guideway so that no stops are necessary - much like freeway overpasses allow the cars on the freeway to continue non-stop.
Although the design suggests a guideway grid, the UniModal design permits guideways to be used in any configuration - such as a linear route system (like most train routes).
Decelerate - tracks, and brakes
Like all PRT systems, vehicles exit the main guideway, then slow and then stop on a deceleration guideway. This is analogous to the way cars exit a freeway, rather than remaining on the road). In this way, the main guideway can allow a constant speed. The design proposes that vehicles slow down to 20 mph on the deceleration guideway before actually making any turn.
The UniModal design proposes using regenerative brakes for normal braking, but in an emergency, an emergency brake pad would press against the inside of the steel rail, permitting fast emergency deceleration. The designers propose a 6 G maximum emergency braking deceleration. The pods would have seatbelts resembling race car seatbelts - with a wider belt and an X shaped harness - to be safer in emergencies.
This deceleration rate was chosen in order to enable vehicles at 1-second headways to comply with rail safety standards requiring that a public transportation vehicle to be far enough behind the vehicle in front of it to make a complete stop in a very short distance. Note that rail safety standards do not yet apply to PRT systems, and that this braking rate is considered unsafe for the general population by most authorities.
Concerns about the disabled
SkyTran proposes that, instead of designing the system so disabled people can use it, it would be cheaper to gives these people door to door taxi service instead.
Inductrack
The magnetic levitation system would be the passive "Inductrack" system using Halbach arrays, as developed by physicist Richard Post at Lawrence Livermore Laboratories. Passive maglev requires no power to levitate vehicles.
Magnetic levitation permits low "friction" (present as magnetic drag). Lawrence Livermore National Laboratory reports that at 100 mph, a 700 pound vehicle would require 408 watts (equivalent to .54 horsepower) to overcome the magnetic drag. By comparison, conventional cars (varying greatly around 3000 pounds) traveling at 65 mph consume between 3000 and 8000 watts.
Intercity vs intracity travel
- Intracity travel is travel within a city. Pods would travel at 100 mph on these lines.
- Intercity travel is travel between cities. Pods would travel at 150 mph on these lines.
Due to air resistance, the energy costs of a vehicle increase as the cube of its speed (approximately). Therefore the intercity plan (at 150 mph) has energy costs 3.4 times as much per mile as the intracity plan (100 mph).
External links
See also
Personal Rapid Transit is the generic term for a family of similar systems.
Categories: