| Revision as of 05:20, 26 February 2015 edit2601:6:3c81:470:747f:1d89:7bbf:f24d (talk) cleaned upTag: section blanking← Previous edit | Revision as of 05:21, 26 February 2015 edit undo2601:6:3c81:470:747f:1d89:7bbf:f24d (talk) →External linksNext edit → | ||
| Line 19: | Line 19: | ||
| * | * | ||
| * | * | ||
| * | |||
| ] | ] | ||
Revision as of 05:21, 26 February 2015
 | It has been suggested that this article be merged with Federal Signal Corporation. (Discuss) Proposed since February 2015. |
 | The topic of this article may not meet Misplaced Pages's general notability guideline. Please help to demonstrate the notability of the topic by citing reliable secondary sources that are independent of the topic and provide significant coverage of it beyond a mere trivial mention. If notability cannot be shown, the article is likely to be merged, redirected, or deleted. Find sources: "Federal Signal 3T22" – news · newspapers · books · scholar · JSTOR (February 2015) (Learn how and when to remove this message) |
 | This article does not cite any sources. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed. Find sources: "Federal Signal 3T22" – news · newspapers · books · scholar · JSTOR (February 2015) (Learn how and when to remove this message) |
The Federal Signal 3T22 is an outdoor warning siren made by Federal Signal Corporation (formerly Federal Sign and Signal Corporation) from 1952 through the early 1990s. It has a very recognizable design, having a ten-port rotor (chopper) on the bottom with ten cones (horns) and a 12-port one on top with twelve cones.
History
The Federal Signal 3T22 was originally designed as the 2T22 in 1952 or 1954. The 2T22 had the same number of ports and cones. It could produce two signals, hence the name "2T22" (the 22 representing the 22 cones and horns). The siren had no solenoids, so it could not perform a "hi-lo" signal. In 1955, Federal designed the 3T22, which was similar, except for its name and that it had solenoids. The 3T22 was superior in design because it could perform the "hi-lo" signal, which is mainly used for fire calls. The 2T22 and 3T22 could produce 113db. There are four models of this type of siren. the 2T22 A and B and the 3T22 A and B. The 3T22's name means this: the 3 stands for its three signals: attack (wail), alert (steady), and hi-lo, and the 22 again stands for the twenty-two cones. The siren was mainly used for air raid warnings during the Cold War era and weather warnings after the war. In the early 1990s, the siren's production was stopped when it was replaced with the newer 2001-130, which could reach 130db, hence the name. Like many other older siren models, these sirens are becoming more uncommon due to their age and because of newer technology.
Design
The 3T22 came in only one port ratio: 10/12. It had ten ports and cones on the bottom and twelve ports and cones on the top. It also had a smaller cone on top to reduce rain and other water-related substances such as snow from getting inside. It had two solenoid boxes, one on top, and one on the bottom. There were also two air intake spots: also one on the top and bottom. The siren had a small stand with three legs so it could be mounted on a pole or roof.
External links
- https://federalsignal.com/
- Hear a 2T22 in alert mode
- Hear a 2T22 in attack mode
- Hear a 3T22 in alert mode
- Hear a 3T22 in attack mode
- Hear a 3T22 in hi-lo mode