| Revision as of 22:54, 31 October 2002 editMaury Markowitz (talk | contribs)Administrators75,981 edits new article | Revision as of 14:43, 31 May 2003 edit undoMaury Markowitz (talk | contribs)Administrators75,981 editsmNo edit summaryNext edit → | ||
| Line 1: | Line 1: | ||
| The '''delta-wing''' is a wing ] in the form of a large triangle. Its use was first pioneered by ] prior to ] in Germany |
The '''delta-wing''' is a wing ] in the form of a large triangle. Its use was first pioneered by ] prior to ] in Germany. | ||
| The primary advantage of the design is that the wing's leading edge remains behind the ] generated by the nose of the aircraft when flying at ] speeds, which was a distinct improvement on traditional wing designs. Another advantage is that as the ] increases the leading edge of the wing generates a huge ] which remains attached to the upper surface of the wing, making the delta have very high ] points. The combination of these two features is a dream come true, a normal wing built for high speed use is typically dangerous at low speeds, but in this regime the delta transitions to a mode of lift based on the vortex it generates. | |||
| After the war Lippich migrated to the ], where he ended up working at ]. Here the other engineers became very interested in his interceptor designs, and started work on a larger version known as the F-92. This project was eventually cancelled as impractical, but a prototype flying testbed was almost complete by that point, and was later flown widely as the XF-92. | |||
| The design generated intense interest around the world. Soon almost every aircraft design, notably interceptors, were designed around a delta-wing. Examples include the ] ''Hustler'', the ] and the ]. | Lippich studied a number of ] powered (sometimes coal-fueled!) delta-wing ] during the war, one progressing as far as a glider prototype. After the war Lippich migrated to the ], where he ended up working at ]. Here the other engineers became very interested in his interceptor designs, and started work on a larger version known as the F-92. This project was eventually cancelled as impractical, but a prototype flying testbed was almost complete by that point, and was later flown widely as the XF-92. The design generated intense interest around the world. Soon almost every aircraft design, notably interceptors, were designed around a delta-wing. Examples include the ] ''Hustler'', the ] and the ]. | ||
| Deltas fell out of favour due to some undesirable characteristics, notably flow-separation at high angles of attack (]s have similar problems), and high drag at low altitudes. As the performance of jet engines grew, fighers with more traditional planforms found they could perform almost as well as the deltas, but do so while manuvering much harder and at a wider range of altitudes. | Deltas fell out of favour due to some undesirable characteristics, notably flow-separation at high angles of attack (]s have similar problems), and high drag at low altitudes. As the performance of jet engines grew, fighers with more traditional planforms found they could perform almost as well as the deltas, but do so while manuvering much harder and at a wider range of altitudes. | ||
| Today a reminant of the delta can be found on most ], in the form of ]s. These are effectively very small delta wings placed so they remain out of the airflow in cruising flight, but start to generate a vortex at high angles of attack. The vortex is then captured on the top of the wing to provide additional lift, thereby combining the delta's high-alpha "trick" with a conventional highly effecient wing planform. | |||
Revision as of 14:43, 31 May 2003
The delta-wing is a wing planform in the form of a large triangle. Its use was first pioneered by Alexander Lippich prior to WWII in Germany.
The primary advantage of the design is that the wing's leading edge remains behind the shock wave generated by the nose of the aircraft when flying at supersonic speeds, which was a distinct improvement on traditional wing designs. Another advantage is that as the angle of attack increases the leading edge of the wing generates a huge vortex which remains attached to the upper surface of the wing, making the delta have very high stall points. The combination of these two features is a dream come true, a normal wing built for high speed use is typically dangerous at low speeds, but in this regime the delta transitions to a mode of lift based on the vortex it generates.
Lippich studied a number of ramjet powered (sometimes coal-fueled!) delta-wing interceptor aircraft during the war, one progressing as far as a glider prototype. After the war Lippich migrated to the US, where he ended up working at Convair. Here the other engineers became very interested in his interceptor designs, and started work on a larger version known as the F-92. This project was eventually cancelled as impractical, but a prototype flying testbed was almost complete by that point, and was later flown widely as the XF-92. The design generated intense interest around the world. Soon almost every aircraft design, notably interceptors, were designed around a delta-wing. Examples include the Convair B-58 Hustler, the Avro Arrow and the MiG-21.
Deltas fell out of favour due to some undesirable characteristics, notably flow-separation at high angles of attack (swept-wings have similar problems), and high drag at low altitudes. As the performance of jet engines grew, fighers with more traditional planforms found they could perform almost as well as the deltas, but do so while manuvering much harder and at a wider range of altitudes.
Today a reminant of the delta can be found on most fighter aircraft, in the form of leading edge extensions. These are effectively very small delta wings placed so they remain out of the airflow in cruising flight, but start to generate a vortex at high angles of attack. The vortex is then captured on the top of the wing to provide additional lift, thereby combining the delta's high-alpha "trick" with a conventional highly effecient wing planform.