Misplaced Pages

Friction

Article snapshot taken from Wikipedia with creative commons attribution-sharealike license. Give it a read and then ask your questions in the chat. We can research this topic together.

This is an old revision of this page, as edited by Vary (talk | contribs) at 19:04, 20 January 2006 (Popups-assisted reversion to revision 35962530). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Revision as of 19:04, 20 January 2006 by Vary (talk | contribs) (Popups-assisted reversion to revision 35962530)(diff) ← Previous revision | Latest revision (diff) | Newer revision → (diff)

Friction is the force that opposes the relative motion or tendency of such motion of two surfaces in contact.

The classical linear approximation of the force of friction known as Coulomb friction (named for Charles-Augustin de Coulomb) is expressed as:

F f = v | v | ⋅ F n ⋅ μ f {\displaystyle F_{f}={\frac {v}{|v|}}\cdot F_{n}\cdot \mu _{f}\,}

where

v {\displaystyle v\,} =vector velocity of surface
| v | {\displaystyle |v|\,} =magnitude of the velocity vector
F f {\displaystyle F_{f}\,} = the force of friction
F n {\displaystyle F_{n}\,} = the force normal to the contact surface
μ f {\displaystyle \mu _{f}\,} = the coefficient of friction

This very simple, yet incomplete, representation of friction is adequate for the analysis of many physical systems.

Coefficient of Friction

The coefficient of friction (also known as the frictional coefficient or the friction coefficient) is a scalar value which describes the ratio of the force of friction between two bodies and the force pressing them together. The coefficient of friction depends on the materials used -- for example, ice on metal has a low coefficient of friction (they slide past each other easily), while rubber on pavement has a high coefficient of friction (they do not slide past each other easily).

It is also important to discriminate between sliding (dynamic) friction and static friction. For sliding friction, the force of friction does not vary with the area of contact between the two objects. This means that sliding friction does not depend on the size of the contact area. However, for static friction where there is an element of adhesion, the contact area does matter. For a race car, wide wheels are used to increase the static friction with the road. However, once adhesion is lost, the size of the contact area is no longer relevant.

The force of friction is always exerted in a direction that opposes movement. For example, a chair sliding to the right across a floor experiences the force of friction in the left direction.

The coefficient of friction is an empirical measurement -- it has to be measured experimentally, and cannot be found through calculations. Rougher surfaces tend to have higher values. Most dry materials in combination give friction coefficient values from 0.3 to 0.6. It is difficult to maintain values outside this range. A value of 0.0 would mean there is no friction at all. Rubber in contact with other surfaces can yield friction coefficients from 1.0 to 2.0. A system with "interlocking teeth" between surfaces may be indistinguishable from friction, if the "teeth" are small, such as the grains on two sheets of sandpaper or even molecular sized "teeth".

Types of Friction

Static Friction

Static friction (informally known as stiction) occurs when the two objects are not moving relative to each other (like a desk on the ground). The coefficient of static friction is typically denoted as μs. The initial force to get an object moving is often dominated by static friction.

  • Rolling friction occurs moving relative to each other and one "rolls" on the other (like a car's wheels on the ground). This is classified under static friction because the patch of the tire in contact with the ground, at any point while the tire spins, is stationary relative to the ground. The coefficient of rolling friction is typically denoted as μr.

Kinetic Friction

Kinetic friction occurs when two objects are moving relative to each other and rub together (like a sled on the ground). The coefficient of kinetic friction is typically denoted as μk, and is usually less than the coefficient of static friction. From the mathematical point of view, however, the difference between static and kinematic friction is of minor importance: Let us have a coefficient of friction which depends on the displacement velocity and is such that its value at 0 (the static friction μs ) is the limit of the kinetic friction μk for the velocity tending to zero. Then a solution of the contact problem with such Coulomb friction solves also the problem with the original μk and any static friction greater than that limit.

Examples of kinetic friction:

  • Sliding friction is when two objects are rubbing against each other. Putting a book flat on a desk and moving it around is an example of sliding friction
  • Fluid friction is the friction between a solid object as it moves through a liquid or a gas. The drag of air on an airplane or of water on a swimmer are two examples of fluid friction.

When an object is pushed along a surface with coefficient of friction μk and a perpendicular (normal) force acting on that object directed towards the surface of magnitude N, then the energy loss of the object is given by:

U = N μ k d {\displaystyle U=N\mu _{k}d\,}

Where d is the distance travelled by the object whilst in contact with the surface. This equation is identical to Energy Loss = Force x Distance as the frictional force is a non-conservative force. Note, this equation only applies to kinetic friction, not rolling friction.

Physical deformation is associated with friction. While this can be beneficial, as in polishing, it is often a problem, as the materials are worn away, and may no longer hold the specified tolerances.

The work done by friction can translate into deformation and heat that in the long run may affect the surface's specification and the coefficient of friction itself. Friction can in some cases cause solid materials to melt.

Friction may occur between solids, gases and fluids or any combination thereof. See aerodynamics and hydrodynamics.

Reducing Friction

Devices

Devices, such as ball bearings can change sliding friction into the less significant rolling friction.

Techniques

One technique used by railroad engineers is to back up the train to create slack in the linkages between cars. This allows the train to pull forward and only take on the static friction of one car at a time, instead of all cars at once, thus spreading the static frictional force out over time.

Generally, when moving an object over a distance: To minimize work against static friction, the movement is performed in a single interval, if possible. To minimize work against kinetic friction, the movement is performed at the lowest velocity that's practical. This also minimizes frictional stress.

Lubricants

A common way to reduce friction is by using a lubricant, such as oil, that is placed between the two surfaces, often dramatically lessening the coefficient of friction. The science of friction and lubrication is called tribology. Superlubricity, a recently-discovered effect, has been observed in graphite: it is the substantial decrease of friction between two sliding objects, approaching zero levels - a very small amount of frictional energy would be dissipated due to electronic and/or atomic vibrations.

Lubricants to overcome friction need not always be thin, turbulent fluids or powdery solids such as graphite and talc; acoustic lubrication actually uses sound as a lubricant.

Lubricant technology

AF coatings (anti-friction coatings) have been successfully used for years as an element of heavy-duty lubrication. Typically used for applications where a permanent lubricating film is needed for metal-to-plastic or plastic-to-plastic lubrication, AF coating technology offers an economic solution to a wide range of engineering problems.

The usage of AF coatings, such as Molykote® brand or other prominent anti-friction coating brand, is most successful when requirements for wear and corrosion protection and optimal coefficient of friction are properly met. A low, high, or even constant coefficient of friction is achievable, if the appropriate application and type of AF coating is utilized.

A firm, completely dry, and non-contaminating lubricating film results once it is properly prepared and applied. The AF coating generally consists of the resin (epoxy, phenolic, and silicone) - a base material, which adheres well to the surface. Solid lubricants such as MoS2, PTFE, polyamide, polyethylene, and graphite are set in this base material, passing on the anti-friction properties of an AF coating.

Water-dilutable AF coatings, coatings low in solvents, as well as non-combustible or electrostactically sprayable AF coatings, are now being offered to help save energy and meet environmental protection regulations.

Many products using AF technology offer corrosion protection in excess of normal industrial requirements, while some are unaffected by fuels, solvents, or oils.

Application is typically simple: preferably by spraying, dipping, or brushing on thoroughly degreased metal surfaces. The drying and curing times are short (between three minutes for air-drying and sixty minutes for oven cured coatings).

Products of friction

According to the law of conservation of energy, no energy should be lost due to friction. The kinetic energy lost is transformed primarily into heat and/or motion of other objects and fluids. An airplane will heat and accelerate the air as it passes. A submarine will do the same to the water. In some cases, the "other object" to be accelerated may be the Earth. A sliding hockey puck will come to rest due to friction both by changing its energy into heat and accelerating the Earth in its direction of travel (by an immeasurable amount). Since heat and fluid motion quickly dissipate and the change in velocity of the Earth can't be seen, many early philosophers, such as Aristotle, concluded that moving objects lose energy without an opposing force. Lubricant technology is when lubricants are mixed with the application of science, especially to industrial or commercial objectives.

See Also

References

  • . ISBN 1572594926. {{cite book}}: Missing or empty |title= (help); Unknown parameter |Author= ignored (|author= suggested) (help); Unknown parameter |Publisher= ignored (|publisher= suggested) (help); Unknown parameter |Title= ignored (|title= suggested) (help); Unknown parameter |Year= ignored (|year= suggested) (help)

Template:Link FA

Category: