Misplaced Pages

This is an old revision of this page, as edited by Bluebot (talk | contribs) at 11:02, 25 July 2006 (removing excess header per Misplaced Pages:Guide to layout). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Modulated continuous wave is defined by the Federal Communications Commission in 47 CFR §97.3(c)(4) as "Tone-modulated international Morse code telegraphy emissions having designators with A, C, D, F, G, H or R as the first symbol; 2 as the second symbol; A or B as the third symbol."

Simply put, MCW uses a fixed audio tone to modulate a carrier wave. This is an older method of sending Morse code, with continuous wave being the more common method used today. MCW is not allowed in the United States on amateur radio frequencies lower than 50 MHz, as it is a very ineffecient use of radio spectrum.

See also

• Types of radio emissions
• Morse code

References

• "Amateur Radio Service Definitions (47 CFR §97.3)". Retrieved August 03. {{cite web}}: Check date values in: |accessdate= (help); Unknown parameter |accessyear= ignored (|access-date= suggested) (help)

• "Ham Radio Jargon, Abbreviations and Terminology". Retrieved August 03. {{cite web}}: Check date values in: |accessdate= (help); Unknown parameter |accessyear= ignored (|access-date= suggested) (help)

This article related to amateur radio is a stub. You can help Misplaced Pages by expanding it.

• v
• t
• e

• Amateur radio
• Radio modulation modes
• Radio
• Amateur radio stubs