Misplaced Pages

Modulated continuous wave

Article snapshot taken from Wikipedia with creative commons attribution-sharealike license. Give it a read and then ask your questions in the chat. We can research this topic together.

This is an old revision of this page, as edited by Nigelj (talk | contribs) at 20:56, 31 October 2008 (a liitle more about usage). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Revision as of 20:56, 31 October 2008 by Nigelj (talk | contribs) (a liitle more about usage)(diff) ← Previous revision | Latest revision (diff) | Newer revision → (diff)
Passband modulation
Analog modulation
Digital modulation
Hierarchical modulation
Spread spectrum
See also

Modulated continuous wave is defined by the Federal Communications Commission in 47 CFR §97.3(c)(4) as "Tone-modulated international Morse code telegraphy emissions having designators with A, C, D, F, G, H or R as the first symbol; 2 as the second symbol; A or B as the third symbol." See Types of radio emissions for a general explanation of these symbols.

Simply put, MCW uses a fixed audio tone to modulate a carrier wave. This is an older method of sending Morse code, with continuous wave being the more common method used today.

Unlike A1A CW transmissions, A2A MCW morse can clearly be heard on a normal AM radio receiver. It was commonly used by many RDF beacons to send a morse station identifier on a regular basis.

MCW is not allowed in the United States on amateur radio frequencies lower than 50 MHz, as it is a very inefficient use of radio spectrum.

See also

References

International Morse code
Transmission methods
Notable signals
Other writing systems
in Morse code
Stub icon

This article related to amateur radio is a stub. You can help Misplaced Pages by expanding it.

Categories: