Misplaced Pages

Metrication in the United Kingdom

Article snapshot taken from Wikipedia with creative commons attribution-sharealike license. Give it a read and then ask your questions in the chat. We can research this topic together.

This is an old revision of this page, as edited by DeFacto (talk | contribs) at 17:16, 3 March 2012 (→2000 to 2006: Oops). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Revision as of 17:16, 3 March 2012 by DeFacto (talk | contribs) (→2000 to 2006: Oops)(diff) ← Previous revision | Latest revision (diff) | Newer revision → (diff)
Measuring devices purchased on the British High Street: Electrical measurements have always been metric, temperature is mainly metric but both metric and imperial units are used for length and mass.

Metrication in the United Kingdom is the process of introducing the metric system of measurement in place of imperial units in the United Kingdom.

The adoption of metric units has been discussed intermittently by Parliament since 1818. A formal policy of metrication started in 1965. As of 2012, metrication in the UK is partial, with imperial units remaining in common and widespread use. Most regulated selling by weight or measure is conducted in metric units.

In its accession treaty to the European Economic Community (EEC) in 1973, the UK was obliged within five years to incorporate into domestic law all EEC directives including the use of metric units for many purposes. By 1980 most pre-packaged goods were sold by metric measure, but the mandatory use of metric units for packaged goods only took effect in 1995. Mandatory metric measures for goods sold loose or from bulk began in 2000. The use of "supplementary indications" (Imperial units given alongside the metric) was originally to be permitted for a limited period only, but that period was extended a number of times and eventually permission was granted indefinitely.

In a survey in 2007, 56% opposed a change to complete metrication, 19% supported it and 22% said they neither opposed nor supported it. Imperial units are still commonly used to describe body measurements, journey distances and vehicle speeds, and vehicle fuel economy is described in terms of "miles per gallon" even though fuel has not been sold in gallons since the early 1980s. The pint is used when referring to draught beer or cider-by-the-glass consumption, and often in association with bottled milk usage. At school, pupils are taught metric units and rough metric equivalents of imperial units that are still in daily use .

History

Before 1799

When James VI of Scotland inherited the English throne in 1603, England and Scotland had different systems of measure. Superficially the English and the Scots units of measure were similar - many had the same names but there were differences in their sizes: in particular the pint and gallon being more than twice the size of their English counterparts. This situation continued until 1707 when, under the Act of Union, the Parliaments of England and Scotland were merged and the English units of measure became the standard for the United Kingdom.

Gunter's chain - one of Britain's earliest decimal-based measuring devices, each link being 0.001 furlongs, greatly simplified the measurement of land area

This period marked the Age of enlightenment when people started using the power of reason to reform society and advance knowledge. Britons played their role in the realm of measurement laying down practical and philosophical foundations for a decimal system of measurement which were ultimately to provide the building blocks of the metric system.

One of the earliest decimal measuring devices developed in 1620 by the English clergyman and mathematician Edmund Gunter introduced two new units of measure - the chain and the link, and a new measuring device Gunter's chain. Gunter's chain was one chain (one tenth of a furlong) in length and consisted of 100 links, making each link 0.001 furlongs. The decimal nature of these units and of the device made it easy to calculate the area of a rectangle of land in acres and decimals of an acre.

A decimal system of measurement was part of Wilkin's philosophical language published in 1668

In 1670, John Wilkins, the first president of the Royal Society, published his proposal for a decimal system of measure in his work An Essay towards a Real Character and a Philosophical Language. His proposal envisaged a system of units in which the base unit of length was defined by a pendulum that had a period of one second and that the base unit of mass was defined by a cube of rainwater having sides equal to the base unit of length. He recycled the existing names of units of measure so that there were 10 lines in an inch, 10 inches in a foot and so on. A century later his concept of defining unit mass in terms of a cube of water with edges of unit length was one of the fundamental concepts of the metric system.

In finding difficulties in liaising with German scientists, the British inventor James Watt, in 1783, called for the creation of a global decimal measurement system. A letter of invitation in 1790 from the French National Assembly to the British Parliament to help create such a system using the length of a pendulum (as proposed by Wilkins) as the base unit of length received the support of the British Parliament, championed by John Riggs Miller, but when the French overthrew their monarchy and decided to use the meridional definition of the metre as their base unit, Britain withdrew support. The French continued alone and created the foundations of what is now called Système International d'Unités and is the sole measurement system for most of the world.

1799–1945

This section needs additional citations for verification. Please help improve this article by adding citations to reliable sources in this section. Unsourced material may be challenged and removed. (February 2012) (Learn how and when to remove this message)

In 1799 the French adopted the metre and the kilogram as their new units of length and mass. As use of the new system, originally called the "Decimal System", grew through Europe, pressure grew in the UK for decimalisation. The issue of decimalisation of measurement was intertwined in the UK with decimalisation of currency. The idea was first discussed by a Royal Commission that reported in 1818 and again in Parliament by Sir John Wrottesley in 1824. Another Royal Commission was set up 1838 by Chancellor of the Exchequer Thomas Spring Rice and it reported in 1841 that decimal coinage was required first. A third commission advocated in 1853 decimal coinage in the form £1 : 10 florin : 100 cent : 1000 mil. The first florins (one tenth of a pound sterling) were struck in 1849 as silver coins weighing 11.3 grams (0.40 ounces) and having a diameter of 28 millimetres (1.1 inches).

In 1854 Wrottesley set up the "Decimal Association" to lobby for decimalisation of both measurement and coinage. An early supporter of the Decimal Association was the mathematician Augustus de Morgan whose articles supporting the metric system had been published in the Penny Cyclopeadia (1833) and The Companion to the Almanac (1841). A few days later Wrottesley met with Gladstone, then Chancellor of the Exchequer, but was unable to win him over to the idea. In 1862, the Select Committee on Weights and Measures favoured the introduction of decimalisation to accompany the introduction of metric weights and measures. A further Royal Commission "on the question of the introduction of metric system of weights and measures" also reported in 1869.

In 1863 the House of Commons passed a law by 110 votes to 75 mandating the use of the metric system throughout the Empire, but due to lack of parliamentary time the bill was not debated in the House of Lords and so did not become law. The following year, after pressure from the astronomers George Airy and Sir John Herschel the bill was watered down to merely legalise the use of the metric system in contracts. It was presented and passed as a Private Member's Bill. However, ambiguous wording of the 1864 law meant that traders who possessed metric weights and measures were still liable to arrest under Acts 5 and 6 William IV c63.

Joule's Heat Apparatus, 1845

While the politicians were discussing whether or not to adopt the metric system, British scientists were in the forefront in developing the system. In 1845 James Prescott Joule published a paper in which he proved the equivalence of mechanical and thermal energy, a concept that is vital to the metric system - in SI, power is measured in watts and energy in joules regardless of whether it is mechanical, electrical or thermal.

In 1861 a committee of the British Association for Advancement of Science (BAAS) including William Thomson (later Lord Kelvin), James Clerk Maxwell and Joule among its members was tasked with investigating the "Standards of Electrical Resistance". In their first report (1862) they laid the ground rules for their work - the metric system was to be used and measures of electrical energy must have the same units as measures of mechanical energy. In the second report (1863) they introduced the concept of a coherent system of units whereby units of length, mass and time were identified as "fundamental units" (now known as base units). All other units of measure could be derived (hence derived units) from these base units.

In 1873, another committee of the BAAS that also counted Maxwell and Thomson among its members and tasked with "the Selection and Nomenclature of Dynamical and Electrical Units" recommended using the CGS (centimetre-gram-second) system of units. The committee also recommended the names of "dyne" and "erg" for the CGS units of force and energy. The CGS system became the basis for scientific work for the next seventy years.

In 1875 a British delegation was one of twenty national delegations to a convention in Paris that resulted in seventeen of the nations signing the Metre Convention on 20 May 1875 which resulted in the setting up of the three bodies: the CGPM, CIPM and BIPM that were charged with overseeing weights and measures on behalf of the international community. The United Kingdom was one of the countries that declined to sign the convention. In 1882 the British firm Johnson, Matthey & Co secured an agreement with the French government to supply 30 standard metres and 40 standard kilograms. Two years later the United Kingdom signed the treaty and the following year it was found that the standard yard which had been in use since 1855 had been shrinking at the rate of one part per million every twenty years. In 1889 one of the standard metres and one of the standard kilograms that had been cast by Johnson, Matthey & Co were selected at random as the reference standard and the other standards, having been cross-correlated with each other were distributed to the signatory nations of the treaty.

In 1896 Parliament passed the Weights and Measures (Metric System) Act, legalising metric units for all purposes but not making them compulsory.

The situation was clarified in 1897 following another Select Committee which also recommended that metrication become compulsory by 1899. In 1902, an Empire conference decided that metrication should be compulsory across the British Empire. In 1904, scientist Lord Kelvin led a campaign for metrication and collected 8 million signatures of British subjects. On the opposition side, 1904 saw the establishment of the British Weights and Measures Association for "the purpose of defending and, where practicable, improving the present system of weights and measures". At this time 45% of British exports were to metricated countries. Parliament voted to set up a Select Committee on the matter.

This Select Committee reported in 1907 and a bill was drafted proposing compulsory metrication by 1910, including decimalisation of coinage. The opposition declared that decimalisation of coinage would cost £100 million alone.

1945 to 1973

This section needs additional citations for verification. Please help improve this article by adding citations to reliable sources in this section. Unsourced material may be challenged and removed. (February 2012) (Learn how and when to remove this message)

The matter was dropped in the face of wars and depression, and would not be again raised until the 1951 Hudgson Report, the result of yet another Select Committee which unanimously recommended compulsory metrication and currency decimalisation within 10 years. It said "The real problem facing Great Britain is not whether to adhere either to the Imperial or to the metric system, but to maintain two legal systems or to abolish the Imperial." The report also recommended that the change should be done in concert with the Commonwealth (former Empire) and the USA. It also pointed out that metric standards were more accurate than Imperial ones, and that the yard and pound should be pegged to definite metric values. This was done by international agreement in 1959 and currently the yard is defined as 0.9144 metres exactly, and the pound as 0.453 592 37 kg exactly. Agreement could not be reached on the pint (and gallon), and this value still differs between the UK and US (the only countries that maintain legal definitions of these units).

File:Metrication-uk-logo.png
Metrication logo of the Board of Trade

In 1965 the Board of Trade and the Confederation of British Industry declared their full support for metrication and decimalisation. Currency decimalisation finally took place on Decimal Day, 15 February 1971, although £1 did not change in value. The Metrication Board was set up in 1969. Unlike its South African and Australian counterparts which had mandatory powers, it only had an "advisory, educational and persuasive role". Metric units have been taught in UK schools since the late 1960s (and exclusively since 1974), and certain industries also converted or largely converted decades ago. For example the paper industry converted in 1970, and the construction industry between 1969 and 1972 – although certain products continue to be produced to with reference to Imperial trade names but made using metric dimensions in the factory; for example, a 13 mm thick plasterboard is still often called 'half-inch', even though the measurement is rounded to a convenient metric size and so is now only approximately half an inch thick.

Metric Britain logo, Metrication Board

A Commons debate in 1970 on the introduction of compulsory metrication ended in farce. The governing Labour party was then unpopular and the opposition Conservatives revolted on the issue. Examples include these Conservative MPs' speeches:

  • Robert Redmond: "When I have travelled abroad and particularly on the Continent, I have noticed that people have on their desks calculating machines while we in Britain do the same sums in our heads." (In 1970 the United Kingdom still used pounds, shillings and pence).
  • Henry Kerby: "This metric madness, this alien academic nonsense, introduced secretly through the back door by a bunch of cranks and the big business tycoons... and put into clandestine operation."
  • Carol Mather: "I am led to the conclusion that comprehensive universal metrication is a bit of a nonsense... there is a gap between the millimetre and the metre, there is no centimetre.... The kilo is too heavy for the housewife to carry and we know that in France and Denmark they use the old system of the pound."

The press reports on the debate, particularly those of The Daily Telegraph and The Times, were very favourable to the opinions of the Conservatives. Following the debate the projected deadlines for the phased metrication steps were delayed one by one. The original intention of metrication "in concert with the Commonwealth" backfired; Australia, New Zealand and South Africa all completed their metrication processes by 1980, the year that the Metrication Board was abolished as a cost-cutting measure. (In contrast, the situation of metrication in Canada resembles that of the UK, except that all road signs were converted in the 1970s.) The last laws which restricted the sale of metricated goods were only removed in 1995; though it is still illegal to sell draught beer in metric units, which in 2002 led to an Austrian-themed pub being asked to stop selling beer by the half litre traditional German steins.

1973 to 1999

Although in the United Kingdom a metrication process had been proposed by the Board of Trade in 1965, and the Metrication Board was established in 1968, before 1973, the year that the UK joined what was then the European Economic Community (EEC), the only units of measure that were legally defined were those required to be used in trade - length, area, volume, mass or weight and electrical units. For all other purposes, including in science and in engineering, there was a free choice of which units to use.

As a condition of joining the EEC, the UK had agreed to introduce into its national law, within five years, all EEC directives that were then in force. This included directive 71/354/EEC; the directive that catalogued units of measure that should be used, under certain circumstances, for just economic, public health, public safety or administrative purposes. The directive also catalogued a number of other, mainly metric, units which were to be withdrawn from use by the end of 1977. For EEC countries, these directives meant that they had to cease using several units from different evolutions of their metric systems, and for the United Kingdom and Ireland it meant allowing the use of metric units alongside their traditional and customary units in use for certain specified applications, all of which were compatible with the existing metrication programme of the UK. Membership of the EEC also required the UK to formally define a number of other units of measure including those for electric current (ampere), electric potential difference (volt), temperature (degree Celsius and kelvin), pressure (pascal), energy (joule) and power (watt).

By the end of the 1970s, the UK's metrication programme was stalling, and the UK government asked the EEC to postpone the deadlines for the introduction of metric units. The result was the repeal of directive 71/354/EEC and the introduction of directive 80/181/EEC. This directive allowed the continued use in the UK, until the end of 1989, of the imperial units: inch, foot, fathom, mile, yard, acre, fluid ounce, gill, pint, quart, gallon, ounce (avoir dupois), troy ounce, pound and therm.

In 1989 a further extension to the deadline was granted in directive 89/617/EEC, an amendment to directive 80/181/EEC. This amendment removed the deadline altogether for the use of the mile, yard, foot and inch on road signs and for speed measurement; for the pint for draught beer and cider, and for milk; for the acre and for the troy ounce, and extended the deadline for the use of most other imperial units to the end of 1994 and to 1999 for the fathom, pint, fluid ounce, gill, ounce (avoir dupois), pound (avoir dupois) and therm.

2000 to 2006

At the beginning of 2000, 1994 amendments to the UK Weights and Measures Act 1985, implementing the deadlines required by the EEC directives, came into force. From 1 January it became a legal requirement that (apart from the excepted products) loose produce sold by weight or measure be sold using metric units. Dual labelling was still allowed (the deadline to end that having been extended to the end of 2009) and there were no restrictions placed on the units that shoppers could use when asking for goods, provided that the actual sale was made in metric units.

In 2000, after the deadline for the cessation of selling loose produce by imperial units had passed, and in response to the demands of his customers, Steve Thoburn, a Sunderland greengrocer, continued to sell produce from his market stall in pounds and ounces. The decision by the empowered authority to prosecute Thoburn, for offences related to the continued selling of produce in imperial units, inspired the start a campaign of support for him. This in turn led to the formation of a group which became known as the Metric Martyrs. Various members of the Metric Martyrs group, including Thoburn, were prosecuted and found guilty of a variety of weights and measures related offences. In July 2002 Thoburn was refused leave to appeal by the House of Lords. Thoburn did appeal to the European Court of Human Rights (ECHR), on the basis that his human rights had been violated, but in February 2004 that court declared that no violation had occurred. Shortly after loosing his ECHR appeal Thoburn died at the age of thirty-nine following a heart attack. The Metric Martyrs group developed into an advocacy group, campaigning for the freedom of retailers to choose which system of units to use, and raising funds to fight court cases for those being prosecuted for weights and measures related offences.

In August 2005, the press revealed that the European Commission had ordered the UK to set a legal deadline for when it would legislate for the use of the pint, mile, yard, foot, inch and the acre to be replaced by metric units.

2007 onwards

In January 2007 the Department of Trade and Industry announced that "the Government intends to support the continued use of supplementary indications after 2009 for an indefinite period"; on 9 May 2007 European Commission Industry Commissioner Günter Verheugen announced that the Commission had dropped its plans to enforce the abolition of Imperial measures from 2010, so that 'supplementary' imperial indications could continue to be used alongside, but not instead of metric units. On 10 September 2007 the European Commission published a proposed amendment to EU Directive 80/181/EEC that would permit "supplementary indicators" to be used indefinitely.

Legal requirements

File:UKproducts-metricusage.JPG
An example of metrication of UK consumer products. Two of the four items are in rounded metric amounts. The milk is labelled "1.136 litres (2 pints)" and the sausages are labelled "340 g (12oz)"

For most activities and in most situations, there are no legal restrictions on, or legal requirements for, which specific system of units of measurement is used in the UK. For certain trading activities (the selling of certain loose goods priced by weight or measure for example) and for certain public administration activities (the wording of new laws and regulations for example), units from a specified system are legally required. Where the unit system is specified it is usually the metric system (for selling pre-packaged food sold by weight, for the selling of loose vegetables priced by weight and in the wording of new laws and regulations for example), although in some cases the imperial system is specified (for the dispensing of draught beer for example). Even when the unit system is specified, units from the other system can be used concurrently as so-called "supplementary indications" (pre-packaged sausages, which require metric system units at least to be used, can be marked "454 g (1 lb)" for example).

Popular opinion

A September 2007 Ipsos MORI telephone survey conducted for The Sun newspaper, entitled "Northern Rock, Metric Measurements And The EU Constitutional Treaty" found, of the sample questioned, that in response to the question "How strongly would you support and oppose Britain switching to use entirely metric measurements, rather than continuing to use traditional units?":

  • 11% strongly supported a switch to entirely metric measurements
  • 8% tended to support a switch to entirely metric measurements
  • 22% neither supported nor opposed
  • 14% tended to oppose a switch to entirely metric measurements
  • 42% strongly opposed a switch to entirely metric measurements

Detailed results in this survey showed net opposition by all demographic groups; with more than 50% net opposition by the following: Sun readers, aged 65+, Conservative voting intentions, and tabloid newspaper readers.

The Times reported in 2007 that the results of a survey by the British Weights and Measures Association (a group whose stated aim is "to protect and promote British weights and measures, and to oppose compulsory use of the metric system") returned the following results:

  • 80% of people prefer imperial to metric
  • 70% (including 18-24 year olds) can make sense of weights only in imperial measurements

Public debate

The involvement of the European Commission led metrication to be linked in public debate with Euroscepticism, and traditionally Eurosceptic parts of the British press have taken a dim view of the process, often exaggerating or inventing the extent of enforced metrication. Example stories include the Daily Star, which on 17 January 2001 claimed that beer would soon have to be sold by the litre in pubs, something not demanded in any EU directive.

Current usage

The United Kingdom is unique within Europe in that it has retained the imperial system of measurements. The population continue to resist metrication and the traditional imperial measures are preferred by the majority and continue to be in widespread common use. Many aspects of business, commercial and government and associated administrative activities have metricated either totally or partially; including manufacturing and building industries and education. The sport of rugby union has also metricated. Many activities remain without visible evidence of metrication where imperial units are used or even mandated, including road signs, estate agents' advertisements and the non-specialist media. Trade is substantially metric.

Weather forecasts

The BBC weather forecast website allows UK users to choose the units of measure to be used. The choices are between degrees Celsius and Fahrenheit for temperature, and between miles per hour and kilometres per hour for wind speed. Pressure is always expressed in millibars.

The move from Fahrenheit to Centigrade (as it was then referred to) was the subject of a Parliamentary question in 1971, and the reply referred to the increasing use and acceptance of the Centigrade scale since it had first been introduced into public weather forecasts issued by the Met Office in 1962.

In a February 2006 article in The Times, the writer suggests that the British tend to use centigrade values for low temperatures and Fahrenheit values for higher temperatures. The rationale being that -6°C sounds colder than 21°F and 94°F sounds more impressive than 34°C.

Commodities

The principal London commodity markets, apart from oil, are metric: the London Metal Exchange having gone metric in 1970, the various agricultural markets which completed their metrication program in 1970 as is the commodities derivatives market LIFFE which was founded in 1982.

The oil industry however uses US dollars per barrels, which is 42 US gallons (159.0 litres; 35.0 imperial gallons).

Energy

Domestic gas is billed in kilowatt hours (kWh) - although gas meters only record the volume of gas used, which is later converted to kWh. All newly-installed gas meters record usage in cubic metres, but many older installations will measure in cubic feet.

Retail

The extent to which various retailing activities have been metricated in the UK varies from not at all, as in the case of draught beer and cider, for example, to partial (metric measures must be used and imperial measures may be used concurrently), as for example, in the case of pre-packaged food sold by weight.

Groceries

While several food items continue to be packaged and sold in sizes based on Imperial units, many now display only the uneven metric equivalent value on the label (such as 454 or 907 grams for 1- or 2-pound packages). Items include jam, marmalade, honey, dates, strawberries, sausages, beefburgers, fresh coffee, malt vinegar, and Christmas puddings.

Major supermarket chains continue to sell own-labelled cow's milk in 1-, 2-, 4-, and 6-pint plastic bottles with the uneven metric equivalent value always shown before the Imperial volume (if that is shown at all). However these same chains sell own-labelled other milks (goat milk, buffalo milk etc) plus most of the dairy-labelled cow's milk in litre-based units, and have been doing so for many years. However, they are gradually introducing more litre-based bottles (e.g. 1, 2, or 3 litres) under their own label as well. In other shops, such as newsagents and convenience stores, milk is usually sold only in litre-based units.

In May 2011, the Asda supermarket chain stated that consumer research had shown that 70% of their customers found metric confusing and would prefer products to be labelled in imperial units. As a result, they were beginning to experiment with selling strawberries by the pound again – and to do the same with other fruit and vegetables if there was enough shopper demand.

In 2000, the Tesco supermarket chain began selling produce in imperial, stating that their survey of 1,000 customers had shown that 90% of their customers "still used imperial measures in their heads". Tesco's use of imperial units over metric, with prices per pound displayed more prominently that those per kilo, was identified in a 2004 Which? magazine report criticising supermarket pricing tactics, as a possible means of appearing cheaper than its rivals.

Alcohol

In the United Kingdom, draught beer and cider are the only goods that may not be sold in metric units; the only legal measures for these drinks when sold on draught are 1⁄3 pint (190 ml) (rarely encountered), 1⁄2 pint (284 ml) and multiples of the latter. Bottled and canned beer is most often sold in 250 ml, 330 ml, 440 ml and 500 ml containers, the uneven metric 568 ml (1 pint) containers are becoming rare now.

Cosmetics

Cosmetics and toiletries are labelled in metric units (grams or millilitres) but some are additionally labelled with US customary units (ounces or US fluid ounces); this is standard practice for goods intended for importation to the US, where dual labelling is compulsory. The US fluid ounce is 4% larger than its imperial counterpart (29.6 ml as against 28.4 ml).

Clothes

Clothing is usually sold and marketed in inches and UK sizes, with the centimetre dimensions and continental size increasingly shown alongside the Imperial, with equal prominence. Shoes are most often seen with traditional British sizes (though the Paris point sizes (exclusively) are not rare).

Consumer electronics

Dual measures are often seen in the home entertainment and computer markets, for describing television, digital camera and monitor screen sizes. (The imperial size given for CRTs is typically that of the tube, whereas the metric measure – tagged 'vcm' – is that of the visible screen excluding the bezel). Products that may appear to be Imperial are actually manufactured to metric specifications, using metric drawings and made on metric machines, even if references to Imperial units persist in some areas.

Education

Since 1974, the metric system has been the primary system of measurement taught in schools. In the National Curriculum for England, metric is the principal system of measurement and calculation. However, pupils are expected to know how to convert between metric and imperial units still in everyday use, specifically citing "pounds, feet, miles, pints and gallons", and conversion between the two systems is given as an example of numerical problems students should be able to solve.

National Health Service

On 25 February 2010, concern was expressed in the House of Lords that 30% of scales used in National Health Service hospitals and facilities for weighing patients were switchable between metric and imperial units and that 10% were permanently set to imperial units. Since drug doses are worked out using patients' weights in kilograms, the use of Imperial or switchable scales risks giving the patient the wrong dose. The Government announced it was taking steps to remedy this situation and insist that all NHS facilities complied with the requirement that all weighing scales were properly calibrated and maintained and displayed only metric units.

Information dissemination

The principal channels for dissemination of information are the press and government agerncies. The approach taken to metrication by writers in various disseminators of information varies considerably. The civil service is bound by law to follow EU directives relating to public administration while journalists are not bound by such restrictions.


Government Organisations

Government disseminators of information include the Office for National Statistics and the Ordnance Survey office both of whom, being government departments, use metric units in their work. The first Ordnance Survey maps with metric values and scales to be produced were the large scale maps which were required by the construction industry following its committment to metrication, and were introduced from 1969 onwards. A metric National Grid was used as the basis for maps published by the Ordnance Survey since World War II. A metric grid was used by War Office maps from 1920 onwards.


Journalism

The Intercity 225, shown here in the livery of the Flying Scotsman, was so named because its design speed is 225 km/h. Some publications quote its top speed as "140 mph (225 km/h)", but others omit the metric equivalent, thereby hiding the source of the numer "225"

Newspapers styles vary. While both The Guardian' and The Times prefer metric units in most circumstances, and both provide exceptions where imperial units are preferred, they differ on some details.

The Times specifies that heights and weights put Imperial measures first while the Guardian's examples are from metric to Imperial. Similarly, while both give first place to hectares, the Guardian prefers square kilometres (with square miles in brackets) while the Times prefers square miles. Both retain the preference for the mile in expressing distances. In contrast, The Economist prefers metric units for "most non-American contexts," except for the United States section where "you may use the more familiar measurements." However, The Economist also specifies "you should give an equivalent, on first use, in the other units".


Unit of measure inconsistencies

These rules of style have led to inconsistencies between administrative documents and the resulting news reports. Examples include:

  • On 18 March 2005 Johnson Beharry was awarded the Victoria Cross for valour while serving in Iraq. The official citation included the text "...drive the vehicle through the remainder of the ambushed route, some 1500m long". The BBC, in paraphrasing the citation, used the expression "He guided the column through a mile of enemy ground".
  • The Channel Tunnel Rail Link carries traffic from the Channel Tunnel to London. Government reports cited the design speed on the link as being 300 km/h while the BBC cited speeds of 186 mph.

Mapping

The Ordnance Survey, the UK's national mapping agency for Great Britain, initiated the Retriangulation of Great Britain in 1936, using metric measures from the start. A metric National Grid was then used as the basis for maps published by the Ordnance Survey from World War II onwards. A metric grid had been used for War Office maps from 1920 onwards.

The first Ordnance Survey maps with metric values and scales to be produced were the large-scale maps which were required by the construction industry following its commitment to metrication, and were introduced from 1969 onwards. Ordnance Survey completed the replacement of its best selling 1 inch to the mile range of maps with the 1:50000 (two centimetres to the kilometre) range in 1974.


Road transport

Road system

See also: Road signs in the United Kingdom
A British 50 mph speed limit sign

Road signs in Great Britain are regulated by Traffic Signs Regulations and General Directions (TSRGD) which specifies the design and the units of measure for the signs. Distance signs are specified with miles or yards as the only allowable units. Height limit, width limit and vehicle length limit signs are required to use feet and inches, but with metres allowed as optional supplementary indicators. Weight limits are expressed in tonnes: the 2011 legislation now correctly requires "t" as the symbol to be used for tonnes on road signs ("18 t" for example). Earlier legislation had also allowed the use of "T" to represent "tonnes" ("7.5 T" for example), so older signs using this notation are also in use. Speed limits are in miles per hour with no units shown on the signs. Advance-warning signs display distances in miles often using the character "m" as an abbreviation (clashing with the SI use of "m" as the symbol for metre. When SI units are used (such as metres on height, width and length restriction signs if the optional metric-measurement is given) the SI symbol "m" is correctly used.

Advance-warning signs for road works and other temporary road obstructions are generally positioned at multiples of 100 metres from the feature to which they refer, with the distances indicated in yards - to the nearest 100 yards (which is within the 10% tolerance allowed) to comply with the TSRGD requirement for yards to be used on such road signs.

In TSRGD 1994 the legislation included the allowance of metric units as "supplementary indications" for many (but not all) height limit warning and prohibition signs. Schedules 16.1 and 16.2 of the TSRGD 2002 catalogue the signs that may display metric units in addition to imperial units: maximum headroom warning signs and height, width and length prohibition signs. On 23 February 2006 the Secretary of State for Transport Alistair Darling said on the BBC Question Time programme that the Government had abandoned its previously long-standing plans to convert the UK's 2 million road signs to metric, due to the cost.

In late 2009 and early 2010, the DfT proposed modifying the legislation to make it mandatory to use dual units signs for height and width limit warning and restriction signs, as it was believed that this would reduce bridge strikes. The analysis noted that

"approximately 10–12% of bridge strikes involved foreign lorries. This is disproportionately high in terms of the number of foreign lorries on the road network."

In December 2011, some amendments to legislation resulting from that part of the consultation that dealt with metric signs have been put to Parliament in the shape of the TSRGD Amendments 2011. This came into force late January 2012.

Since the late 1960s, British roads have been designed using metric units. Location marker posts are erected at 100-metre intervals on the hard shoulder giving the distance from a notional reference point in kilometres to enable maintenance workers, emergency services and the like to pinpoint specific points on the motorway. The digits on these posts were barely visible to motorists. This number was also encoded into the emergency phones that could be used by stranded motorists. The advent of the mobile phone meant that the location of motorists could no longer be pinpointed by reference to the emergency telephone that they were using. To enable such motorists to communicate with the emergency services, driver location signs were erected at approximately 500-metre intervals in England during the period 2007 to 2010. These signs replicate the distances shown on the smaller location marker posts though no units are shown, but don't appear (yet) on Welsh motorways.

Motor vehicles

Motor fuel has been retailed in litres since the 1980s with news media commonly referring to fuel prices in pounds-per-gallon. Fuel consumption is still commonly quoted in miles-per-imperial gallon. Legislation requires that the official fuel economy guide from which advertisers may quote must catalogue "fuel consumption ... in litres per 100 kilometres (l/100km) or kilometres per litre (km/l), and quoted to one decimal place, or, to the extent compatible with the provisions of Council Directive 80/181/EEC ... in miles per gallon".

Almost all motor vehicles first used on public roads on or after 1 April 1984 are required to have speedometers fitted which can display speeds in both miles per hour and kilometres per hour (simultaneously or separately).

Metric units (kW for power, km/h for speed, kg for weight and cc for engince capacity) are used in legislation relating to driving licences.

Metric units are used in legislation relating to vehicle emissions (grammes of CO2 per km), which affects vehicle taxation bands, and entry requirements to low emissions zones.

Rail transport

An 1845 Act of Parliament fixed British track gauges at 4 ft 8½ in and Irish track gauges at 5 ft 3 in. The 4 ft 8½ in gauge was the basis of 60 % of the world's railways, but is expressed as 1435 mm (including the United Kingdom) - a decrease of 0.1 mm, but well within the engineering tolerances. The Irish 5 ft 3 in gauge is now referred to as a 1600 mm gauge – the difference between the metric and imperial values being 0.2 mm, again well within engineering tolerances.

Metric units are used throughout for engineering purposes and rolling stock is designed using metric units as it is required to meet the loading gauge requirements (most of which are specific to Britain). Track distances of most of Britain's rail network are shown in miles and chains, with speed limits in miles per hour, although lineside signs and in-cab computer displays are now metric on routes where the latest 'ERTMS' signalling system has been installed and on the Channel Tunnel Rail Link. Metro and light-rail systems such as the London Underground, Tyne and Wear Metro and Croydon metro also operate using metric.

Air and shipping

Aviation uses the foot for aircraft altitude and both aviation and shipping use nautical miles and knots for distance and speed respectively.

Industry

The metric system is now used in the majority of industries. The coopers' trade is one of the exceptions to this rule. The print industry works with a wide variety of measurements, including paper size, thickness and weight, typographical measurements, pitch and size of holes, which may be imperial, metric or other.

Advocacy groups

A number of advocacy groups exist to promote the metric system at the expense of the imperial system and vice versa. The groups include (in alphabetic order):

  • Active Resistance to Metrication, founded by eurosceptic politician Tony Bennett is best known for its direct action campaign against metric signs.
  • The UK Metric Association campaigns for the complete replacement of the imperial measurement system with the metric system in the United Kingdom.

Costs

The costs of metrication in the UK have not been reliably calculated. True scientific calculations of the potential costs have been fairly rare, and tend to refer to specific proposals.

A 2005 report pointed to the metrication of the UK's 2 million road signs as the major cost of completing the United Kingdom's metrication program. The Department for Transport (DfT) costed the replacement of all of the United Kingdom's road signs in a short space of time at between £565 million and £644 million In 2008–09, before the outcome of the consultations that led to the EU directive 2009/3/EC was known, the DfT had a contingency of £746 million for the metrication of roads signs. In contrast, the United Kingdom Metrication Association, in a report published in 2006 and using a model based on the Irish road sign metrication program estimated the cost of converting road signs to be £80 million, spread over 5 years (or about 0.25% of the annual roads budget).

A 1970s study by the UK chemical industry estimated costs at £6m over seven years, or 0.25% of expected capital investment over the change period. Other estimates ranged from 0.04% of a large company's turnover spread over seven years to 2% of a small company's turnover for a single year. Many companies reported recouping their costs within a year as a result of improved production. Some 90% of UK exports go to metric countries (as only Liberia, Burma and the United States have not adopted the International System of Units ), and there are costs to business of maintaining two production lines (one for exports to the US in Imperial, and the other for domestic sales and exports to the rest of the world in metric). These have been estimated at 3% of annual turnover by the Institute of Production Engineers, and at £1100 million (1980) per annum by the CBI. Regardless of UK metrication, goods produced in the UK for export to the US would have still been labelled in non-metric units to comply with the US Fair Packaging and Labelling Act.

See also

References

  1. ^ "Northern Rock, Metric Measurements And The EU Constitutional Treaty". Ipsos MORI. 24 September 2007. Q12. Retrieved 23 February 2012.
  2. "Mathematics: Ma3 Shape, space and measures". Primary curriculum subjects. Department for Education. Retrieved 2 March 2012.
  3. "Weights & Measures". Scotlands People (A partnership between General Register Office for Scotland, the National Archives of Scotland and the Court of the Lord Lyon). Retrieved 26 October 2011.
  4. Watson, C. M. (1910), British Weights and Measures, London: John Murray, pp. 77–81.
  5. "An Essay towards a Real Character and a Philosophical Language (Reproduction - 34.7 MB)" (PDF). Retrieved 2 August 2011.
  6. "An Essay towards a Real Character and a Philosophical Language (Transcription - 127 kB)" (PDF). Retrieved 2 August 2011.
  7. Carnegie, Andrew (May 1905). James Watt (PDF). Doubleday, Page & Company. pp. 59–60. Retrieved 20 October 2011.
  8. Alder, Ken (2002). The Measure of all Things - The Seven-Year-Odyssey that Transformed the World. London: Abacus. pp. 252–253. ISBN 0 349 11507 9. {{cite book}}: Check |isbn= value: invalid character (help)
  9. "List of commissions and officials 1815-1829 (nos. 1-11)". British-history.ac.uk. 22 June 2003. Retrieved 2 August 2011.
  10. Scott H Brown (2006). "The life and work of Augustus de Morgan" (PDF). Applied Probability Trust. Retrieved 16 January 2011.
  11. "Second report of the Commissioners appointed to inquire into the condition of the Exchequer (now Board of Trade) standards". Bopcris.ac.uk. 22 March 2011. Retrieved 2 August 2011.
  12. Alder, Ken (2002). The Measure of all Things - The Seven-Year-Odyssey that Transformed the World. London: Abacus. p. 360. ISBN 0 349 11507 9. {{cite book}}: Check |isbn= value: invalid character (help)
  13. Joule, James Prescott (1845). "On the Changes of Temperature Produced by the Rarefaction and Condensation of Air". Philosophical Magazine, Series 3. 26. Harper & brothers: 369.
  14. Thomson, William; Joule, James Prescott; Maxwell, James Clerk; Jenkin, Flemming (1873). "First Report – Cambridge 3 October 1862". In Jenkin, Flemming (ed.). Reports on the Committee on Standards of Electrical Resistance - Appointed by the British Association for the Advancement of Science. London. pp. 1–3. Retrieved 12 May 2011.{{cite book}}: CS1 maint: location missing publisher (link)
  15. Thomson, William; Joule, James Prescott; Maxwell, James Clerk; Jenkin, Flemming (1873). "Second report - Newcastle-upon-Tyne 26 August 1863". In Jenkin, Flemming (ed.). Reports on the Committee on Standards of Electrical Resistance - Appointed by the British Association for the Advancement of Science. London. pp. 39–41. Retrieved 12 May 2011.{{cite book}}: CS1 maint: location missing publisher (link)
  16. J C Maxwell (1873). A treatise on electricity and magnetism. Vol. 1. Oxford: Clarenden Press. pp. 1–3. Retrieved 12 May 2011.
  17. ^ J C Maxwell (1873). A treatise on electricity and magnetism. Vol. 2. Oxford: Clarenden Press. pp. 242–245. Retrieved 12 May 2011.
  18. Professor Everett, ed. (1874). "First Report of the Committee for the Selection and Nomenclature of Dynamical and Electrical Units". Report on the Forty-third Meeting of the British Association for the Advancement of Science held at Bradford in September 1873. British Association for the Advancement of Science: 222–225. Retrieved 10 May 2011.
  19. "centimeter-gram-second systems of units". Sizes, Inc. 6 August 2001. Retrieved 7 April 2011.
  20. "International Bureau of Weights and Measures - The Metre Convention". Bipm.org. Retrieved 2 August 2011.
  21. http://www.platinummetalsreview.com/pdf/pmr-v17-i2-066-068.pdf. {{cite news}}: Missing or empty |title= (help)
  22. "Home". Megalithicsites.co.uk. Retrieved 2 August 2011.
  23. "National Physical Laboratory - History of Length Measurement". Npl.co.uk. Retrieved 2 August 2011.
  24. "Metrication timeline". UK Metric Association. 2009. Retrieved 8 December 2009.
  25. Chalupsky, Albert B; Crawford, Jack J; Carr, Edwin M (1974). Going Metric: An analysis of experiences in five nations and their implications for U.S. Educational Planning (PDF) (Report). U.S. Department of Health, Education & Welfare, Department opf Health. p. 23. AIR-41800-2/74-FR. Retrieved 19 October 2011.
  26. Metrication and the UK Building Industry originally published 1995, accessed 28 July 2011
  27. http://hansard.millbanksystems.com/commons/1970/oct/27/metrication#S5CV0805P0_19701027_HOC_425. Parliamentary Debates (Hansard). House of Commons. 27 October 1970. col. 76–168. Retrieved 25 August 2011. {{cite book}}: |chapter-url= missing title (help)
  28. "– 'Metric' bar told to serve pints". BBC News. 9 October 2002. Retrieved 2 August 2011.
  29. White Paper on Metrication (1972): Summary and Conclusions (para 100) (PDF) (Report). London: Department of Trade and Industry Consumer and Competition Policy Directorate. 1972. §21.
  30. "Council Directive 71/354/EEC: On the approximation of the laws of the Member States relating to units of measurement". The Council of the European Communities. 18 October 1971. Retrieved 3 March 2012.
  31. "Council Directive 80/181/EEC: On the approximation of the laws of the Member States relating to units of measurement and on the repeal of Directive 71/354/EEC". The Council of the European Communities. 20 December 1979. Retrieved 3 March 2012.
  32. "Council Directive 80/181/EEC: Amending Directive 80/181/EEC on the approximation of the laws of the Member States relating to units of measurement". The Council of the European Communities. 27 November 1989. Retrieved 3 March 2012.
  33. "Weights and Measures Act 1985". UK Crown. Retrieved 3 March 2012.
  34. "Clearing Up the Metric Muddle". Trading Standards. GloucestershireCounty Council. Retrieved 3 March 2012. Of course a shopper can ask for a pound of apples or half a pound of mince meat, but the retailer must weigh in metric and sell the metric equivalent
  35. "EU gives up on 'metric Britain'". BBC News. The BBC. 11 September 2007. Retrieved 3 March 2012.
  36. "Trader fights metric case". BBC News. The BBC. 6 September 2000. Retrieved 3 March 2012.
  37. "Metric martyrs lose court fight". theguardian. Guardian News and Media. 19 February 2002. Retrieved 3 March 2012.
  38. "'Metric martyr' loses appeal". BBC News. The BBC. 15 July 2002. Retrieved 3 March 2012.
  39. "Metric martyr market trader dies". BBC News. The BBC. 14 March 2004. Retrieved 3 March 2012.
  40. Mark Townsend and Ned Temko (28 August 2005). "Britain gave an inch. Now the EU wants 1.609km". The Observer. Guardian News and Media. Retrieved 3 March 2012.
  41. Jonathan Calvert (28 August 2005). "Brussels presses for metric Britain". The Sunday Times. Times Newspapers.
  42. "British Government position on "supplementary indications"". Bwmaonline.com. Retrieved 2 August 2011.
  43. http://eur-lex.europa.eu/LexUriServ/LexUriServ.do?uri=COM:2007:0510:FIN:EN:PDF
  44. Valerie Elliott (9 May 2007). "Victory for the campaign to save pounds and ounces". The Times. Times Newspapers. Meat, fish, fruit and vegetables can continue to be sold in pounds and ounces in Britain indefinitely, after a U-turn by the European Commission.
  45. "Scales tip in favour of Metric Martyrs as apples come by the pound again". The Guardian. Guardian News and Media. Retrieved 23 February 2012. Metric Martyrs have won the day with the government drawing up a new series of guidelines to allow traders to use imperial measures without fear of prosecution
  46. ^ "Weights and Measures Act 1985 (c. 72), section 8(2)(d)". Statutelaw.gov.uk. Retrieved 2 August 2011.
  47. "The Units of Measurement Regulations 1995", legislation.gov.uk, The National Archives, SI 1995/1804
  48. "The Units of Measurement Regulations 2009", legislation.gov.uk, The National Archives, SI 2009/3046
  49. http://www.bwmaonline.com/
  50. ^ Melanie McDonagh (10 May 2007). "In the merry old land of lb and oz". The Times. Times Newspapers.
  51. ^ Drewry, Gavin (2007). "The jurisprudence of British Euroscepticism – A strange banquet of fish and vegetables". Utrecht Law Review. 3 (2): 101–115. Retrieved 20 October 2011.
  52. ^ Jon Kelly (21 December 2011). "Will British people ever think in metric?". News Magazine. The BBC. Retrieved 19 February 2012.
  53. "A beginner's guide to Rubgy Union" (PDF). International Rugby Board. 2012. Retrieved 20 February 2012.
  54. "Metrication". Weights & measures legislation. National Measurement Office. 2011. Retrieved 18 October 2011.
  55. "Weather: Help". BBC Weather. The BBC. Retrieved 22 February 2012.
  56. "Hansard - Lords Sitting - Weather forecasts and temperature scales". 22 November 1971. Retrieved 22 February 2012.
  57. "Measure for measure". The Times. Times Newspapers. 23 February 2006.
  58. "ft.com/marketsdata". Financial Times. Retrieved 29 February 2012. The actual units of measure are catalogued in the historic data reports and other daughter pages.
  59. "Our Contracts". London Metal Exchange. Retrieved 30 September 2011.
  60. ^ "Final Report of the Metrication Board (1980)". Department of Trade and Industry. {{cite journal}}: |section= ignored (help); Cite journal requires |journal= (help)
  61. "Market Prices and Trends". Farmers Weekly. Retrieved 28 February 2012.
  62. "Derivatives delayed prices". NYSE Euronext. Retrieved 28 February 2012.
  63. "Gas bill calculation". National Measurement Office. UK Crown.
  64. "Will British people ever think in metric?". BBC News Magazine. 21 December 2011. Retrieved 28 December 2011.
  65. "A kilo of strawberries – or would you prefer a pound?". Which?. 6 June 2011. Retrieved 27 September 2011.
  66. "Asda's new strawberry pricing is sound as a lb". The Grocer. 27 May 2011.
  67. "Tesco faces court over pounds and ounces". BBC News. 21 July 2000. Retrieved 27 September 2011.
  68. "The downside of supermarkets. Price confusion, tasteless fruit, vegetables without vitamins, says UK watchdog". Medical News Today. 5 June 2004. Retrieved 30 September 2011.
  69. "The Measuring Instruments (Capacity Serving Measures) Regulations 2006 (No. 1264)". Statutelaw.gov.uk. 4 July 2011. Retrieved 2 August 2011.
  70. "Guidance Note on the use of Metric Units of Measurement by the Public Sector" (PDF). Department of Trade and Industry. 1995. Retrieved 12 October 2011.
  71. "Mathematics - The National Curriculum for England Key stages 1–4". Joint publication by Department for Education and Employment and Qualifications and Curriculum Authority. 1999. {{cite web}}: |archive-url= requires |url= (help); |format= requires |url= (help); Missing or empty |url= (help)
  72. http://www.publications.parliament.uk/pa/ld200910/ldhansrd/text/100225-0001.htm. Parliamentary Debates (Hansard). House of Lords. 25 February 2010. col. 1081–1083. {{cite book}}: |chapter-url= missing title (help)
  73. The Council of the European Communities (27 May 2009). "Council Directive 80/181/EEC of 20 December 1979 on the approximation of the laws of the Member States relating to Unit of measurement and on the repeal of Directive 71/354/EEC". Retrieved 8 June 2010.
  74. ^ Tim Owen (1992). Ordnance Survey: Map Makers to Britain since 1791. Ordnance Survey and HMSO. p. 148. ISBN 0117015075. {{cite book}}: Unknown parameter |coauthor= ignored (|author= suggested) (help)
  75. ^ "Co-ordinate Converter". FieldenMaps.info. 4 May 2009. Retrieved 2011-005-30. {{cite web}}: Check date values in: |accessdate= (help)
  76. Barnett, Roger (June 1992). British Rail’s InterCity 125 and 225 (PDF) (Report). Berkeley, California: The University of California Transportation Center. p. 34. UCTC No. 114. Retrieved 19 October 2011.
  77. "Intercity 225: Fastest in the fleet". 17 October 2000. Retrieved 19 October 2011. {{cite web}}: Unknown parameter |puublished= ignored (help)
  78. "Style Guide". London: Guardian News and Media Limited. 19 December 2008. Retrieved 12 May 2010.
  79. "Online Style Guide - M". London: Times Newspapers Ltd. 10 July 2009. Retrieved 12 May 2010.
  80. "Style Guide". The Economist Newspaper Limited. 2010. Retrieved 8 June 2010.
  81. "Honours and Awards". The London Gazette. 18 March 2005. Retrieved 3 April 2010.
  82. "Soldier wins VC for Iraq bravery". BBC. 18 March 2005. Retrieved 3 April 2010.
  83. "South East Plan Technical Note 3 Transport – para 4.34" (PDF). South East England Regional Assembly. March 2006. Retrieved 3 April 2010.
  84. "High-speed rail line switched on". BBC. 8 January 2007. Retrieved 3 April 2010.
  85. "A History of the Ordnance Survey" (PDF). Retrieved 2 March 2012. See pages 270-272
  86. Statutory Instrument 2002 No. 3113 The Traffic Signs Regulations and General Directions 2002 - HMSO
  87. International Bureau of Weights and Measures (2006), The International System of Units (SI) (PDF) (8th ed.), pp. 116, 118, ISBN 92-822-2213-6, archived (PDF) from the original on 4 June 2021, retrieved 16 December 2021
  88. Traffic Signs Manual (PDF). Vol. Chapter 8, Traffic Safety Measures and Signs for Road Works and Temporary Situations, Part 1: Design (2nd ed.). London: Design Department for Transport/Highways Agency, Department for Regional Development (Northern Ireland), Transport Scotland and Welsh Assembly Government. 2009 . pp. 253–255. ISBN 978 0 11 553051 7. Retrieved 26 August 2011.
  89. "– Question Time, Milton Keynes, 23 February 2006". BBC News. 23 February 2006. Retrieved 2 August 2011.
  90. "Traffic Signs (Amendment) Regulations and General Directions (TSRGD) 2010" (PDF). Department for Transport. Retrieved 4 October 2010.
  91. "Impact Assessment of the Traffic Signs (Amendment) Regulations and General Directions 2010 and of the Traffic Signs (Temporary Obstructions) (Amendment) Regulations 2010" (PDF). Department for Transport. Retrieved 8 December 2009. (Paragraph 55 of the Impact Analysis)
  92. "The Traffic Signs (Amendment) (No. 2) Regulations and General Directions 2011". Department for Transport. 31 January 2012. Retrieved 1 March 2012.
  93. Hansard. "21 Oct 2009 : Column 1446W". Retrieved 4 November 2009.
  94. Highway Agency. "Driver Location Signs (Driver Location Signs)". Retrieved 7 June 2009.
  95. Project Support Officer (Name blacked out) (1 February 2010). "Freedom of Information Response reference HAIL 8870045" (PDF). Highways Agency. Retrieved 6 June 2011.
  96. "The Passenger Car (Fuel Consumption and CO2 Emissions Information) Regulations 2001" (PDF). Vehicle Certification Agency. 30 October 2001. Retrieved 22 October 2011.
  97. "The Road Vehicles (Construction and Use) Regulations 1986: Section 35". UK Crown. Retrieved 6 June 2011.
  98. "Council Directive 75/443/EEC of 26 June 1975 on the approximation of the laws of the Member States relating to the reverse and speedometer equipment of motor vehicles". Council of the European Communities. Retrieved 6 June 2011.
  99. "Motorcycle licence requirements". DirectGov - Public services all in one place. Retrieved 25 August 2011.
  100. "How to Tax your Vehicle". Owning a vehicle. DVLA. Retrieved 20 February 2012.
  101. "An Act for regulating the Gauge of Railways" (PDF). 18 October 1846. Retrieved 26 April 2010.
  102. ^ "Guidance on Gauging" (PDF). Rail Safety and Standards Board Limited. 3 October 2009. Retrieved 26 April 2010.
  103. The exception is HS1, which uses the continental gauge– as will HS2
  104. http://www.rgsonline.co.uk/Rule_Book/Briefing%20Leaflet/GERT8000-RBBL%20ERTMS%20Iss%201.pdf
  105. "Line facts". Transport for London. Retrieved 26 April 2010.
  106. "The Units of Measurement Regulations 1995; Para 5(3)". Opsi.gov.uk. 4 July 2011. Retrieved 18 October 2011.
  107. "Council directive of 20 December 1979; Article 2(b)". Retrieved 18 October 2011.
  108. Summers, Chris (2 September 2004). "Will we ever go completely metric?". BBC News. Retrieved 21 October 2011.
  109. Foggo, Daniel (3 March 2002). "Raiders wage secret war on metric signs". Daily Telegraph. London. Retrieved 21 October 2011.
  110. "Record Details [British Weights and Measures Association (BWMA)]". DANGO - Database of Archives of Non-Governmental Organisations. Retrieved 21 October 2011.
  111. "Record Details [United Kingdom Metric Association (UKMA)]". DANGO - Database of Archives of Non-Governmental Organisations. Retrieved 21 October 2011.
  112. "Estimating the cost of conversion of road traffic signs to metric units". Department for Transport. November 2005. Archived from the original on 10 June 2011. Retrieved 29 December 2010. {{cite web}}: Unknown parameter |archiveaccess= ignored (help)
  113. "Annual Report and Resource Accounts 2008-09 (For the year ended 31 March 2009): page 377" (PDF). Department for Transport. 16 July 2009. Retrieved 14 March 2010.
  114. Robin Paice (2006). Metric signs ahead. United Kingdom Metrication Association. ISBN 978-0-9552351-0-8.
  115. Replacing distance signs only when they reach the end of their natural lives; replacing height, width and length restriction and warning signs over over a five year period and speed restriction signs "overnight".
  116. White Paper on Metrication (1972): Summary and Conclusions (para 100) (PDF) (Report). London: Department of Trade and Industry Consumer and Competition Policy Directorate. 1972. §100.
  117. The CIA world factbook

Bibliography

  1. Grierson, Philip (1995). English Linear Measures: an essay in origins. 'The Stenton Lecture 1971', University of Reading.
  2. McGreevy, Thomas (1995). The Basis of Measurement: Historical Aspects. Chippenham, Picton Pub. ISBN 0948251824.
  3. McGreevy, Thomas (1997). The Basis of Measurement: Metrication and Current Practice. Chippenham, Picton Pub. ISBN 0948251840.
Metrication or its opposition by country

Categories: