Misplaced Pages

This is an old revision of this page, as edited by DASHBot (talk | contribs) at 06:38, 4 June 2012 (Scanned 3 urls; found 1 archives (1 in CiteWeb Templates; 0 in References). See User:DASHBot/Dead Links for settings, shutoff, info, questions.). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Albert
Coordinates	27°30′22″S 152°58′26″E / 27.506026°S 152.973981°E / -27.506026; 152.973981
Carries	Railway
Crosses	Brisbane River
Locale	Brisbane, Queensland, Australia
Official name	Albert Bridge
Characteristics
Design	Steel Truss bridge
Total length	208 metres (682 ft)
Longest span	two spans each 103.7 metres (340 ft)
History
Opened	1895
Location

The Albert Bridge is a railway bridge of steel truss design crossing the Brisbane River, Queensland, Australia. The Albert Bridge links Indooroopilly and Chelmer stations, and has two long spans with one central pier.

The structure consists of two steel spans supported by masonry abutments and a central concrete pier that is encased in an iron caisson. A footway was positioned on the upstream side.

History

The first bridge on the site was completed in July 1875 and enabled the Ipswich to Grandchester railway to reach Brisbane itself. In the early days of settlement, the Brisbane River at Indooroopilly provided an obstacle to the construction of a railway between Brisbane and the mining centre of Ipswich. At this time, a river boat service linked the two centres. The Ipswich railway line did not open until 1875, following the completion of the original Albert Bridge.

The first bridge was destroyed in the 1893 flood, with the present bridge built in 1895. It was designed by Henry Charles Stanley, Queensland's Chief Engineer of Railways from 1891 to 1901. He sought to avoid the obstruction to flood waters posed by multiple piers, which had been the downfall of the first bridge. The bridge was opened to traffic in August 1895 and remains one of Australia's largest truss bridges. Both bridges were named in honour of the Prince of Wales, Prince Albert.

During the second bridge's construction peak a total of 240 workers were involved, both on site and at quarries. When opened the bridge also catered for pedestrian traffic, until the construction of the nearby Walter Taylor Bridge in 1937. A second unnamed railway bridge is located between the Albert Bridge and the Walter Taylor Bridge. This second crossing was constructed in 1957 as part of the quadruplication of the Ipswich railway line.

The Albert Bridge was registered on the Register of the National Estate in 1988 and is listed on the Queensland Heritage Register.

See also

• Bridges over the Brisbane River

References

1. ^ Hogan, Janet (1982). Living History of Brisbane. Spring Hill, Queensland: Boolarang Publications. p. 76. ISBN 0-908175-41-8. {{cite book}}: Cite has empty unknown parameter: |coauthors= (help)
2. "QR Corporate - QR History - Building to the bush". QR Limited. Archived from the original on 22 July 2008. Retrieved 2008-08-16. {{cite web}}: Unknown parameter |deadurl= ignored (|url-status= suggested) (help)
3. Longhurst, Robert. The Brisbane River: A pictorial history. Brisbane: W.D. Incorporated Pty Ltd. p. 31. ISBN 0-646-34472-2. {{cite book}}: Unknown parameter |coauthors= ignored (|author= suggested) (help)
4. ^ "Indooroopilly Toll Bridge and the Albert Bridge, Brisbane, ca. 1937". State Library of Queensland. Retrieved 2008-09-10.
5. "Queensland Heritage Register: Albert Bridge". www.epa.qld.gov.au. Retrieved 2008-09-10.

External links

• Albert Bridge at Structurae
• "Albert Bridge (Place ID 15967)". Australian Heritage Database. Australian Government.
• "Albert Bridge". Queensland Heritage Register. Queensland Heritage Council.

,

• Bridges in Brisbane
• Bridges completed in 1895
• History of Brisbane
• Bridges over the Brisbane River
• Railway bridges in Australia
• Steel bridges
• Truss bridges
• Register of the National Estate
• Queensland Heritage Register