Misplaced Pages

Maschinenfabrik Esslingen GT4

Article snapshot taken from Wikipedia with creative commons attribution-sharealike license. Give it a read and then ask your questions in the chat. We can research this topic together.

This is the current revision of this page, as edited by 193.105.223.125 (talk) at 15:30, 29 May 2024. The present address (URL) is a permanent link to this version.

Revision as of 15:30, 29 May 2024 by 193.105.223.125 (talk)(diff) ← Previous revision | Latest revision (diff) | Newer revision → (diff) Tram type
GT4
GT4 in Stuttgart
ManufacturerMaschinenfabrik Esslingen
Constructed1959–1965
Number built380
Capacity38–41 (seated)
121–125 (standing)
Specifications
Train length18,800 mm (61 ft 8 in) over couplers
Width2,200 mm (7 ft 3 in)
Height3,160 mm (10 ft 4 in)
Doors3
Maximum speed60 km/h (37 mph)
Weight19,500 kg (43,000 lb)
Power output2 x 100 kW motors
AAR wheel arrangement(1A)' (A1)'
Bogies2
Track gauge1,000 mm (3 ft 3+3⁄8 in)
1,435 mm (4 ft 8+1⁄2 in)

The GT4 (from German: Gelenktriebwagen 4-achsig, which translates as 4-axle articulated tramcar) is an articulated tram vehicle built by Maschinenfabrik Esslingen from 1959 until 1965.

History

380 GT4 trams were produced of which 350 were delivered to the Stuttgarter Strassenbahnen, the public transport operator of Stuttgart. The remaining 30 vehicles were delivered to Freiburg (19), Neunkirchen (Saar) (8) and Reutlingen (3). The 350 Stuttgart-vehicles were uni-directional, had three double-doors, and were built to 1,000 mm (3 ft 3+3⁄8 in) gauge. The remaining cars were bi-directional and built with 1,000 mm (3 ft 3+3⁄8 in) gauge, with the exception of the Neunkirchen cars, which were built to 1,435 mm (4 ft 8+1⁄2 in) standard gauge. They also had four powered axles whereas two powered axles was the standard variant. Tram services in Neunkirchen ended in 1978.

With 86 trams in service, as of 2021, the largest operator of GT4 is CTP, the public transport company in Iași, Romania.

Technical specifications

Bi-directional GT4 tram in Freiburg.

The GT4 was developed because the longer six-axle articulated trams with Jacobs bogies, such as the GT6, were not suitable for the Stuttgart network, which had a large number of sharp curves and steep gradients due to the city's hilly topography.

The design of articulation is unique: Both bogies are connected by an underframe, upon which the two halves of the tram body rest. When the tram drives around a curve, the underframe prevents the body from overhanging the inside of the curve, allowing tighter clearances and more flexibility than a non-articulated tram.

On all except the Neunkirchen vehicles only the inner axles on each bogie were powered, therefore the wheel notation was (1A)(A1). Two thirds of the vehicle weight were rested on both powered axles.

The bi-directional variants have a second driver's cab and additional side doors, unlike the uni-directional models.

Trailers

The GT4 can operate in multiple. In later years, some vehicles were only used as powered trailers left and became therefore no modernisized driver's cab. This was the case with 24 vehicles of the first series, 30 in the second series, 98 in the third and fourth series and eight in the fifth series, altogether 180 coaches were affected.

Sale to other cities

As Stuttgart put the Stuttgart Stadtbahn standard gauge light rail system in operation from 1985 onwards, some surplus GT4 cars were sold to other cities:

Some vehicles were destroyed or damaged beyond repair during a great fire in the Feuerbach depot in Stuttgart in 1986.

One Iași tram was rebuilt in 2013 by Electroputere VFU as type GT4M.

The bi-directional cars originally delivered to Reutlingen (59,60 and 61) were later sold to Ulm. The Ulm workshop rebuilt them to unidirectional cars (11, 12 and 13).

In 1989, a longer car set was rebuilt just before being exported to Japan: Two unidirectional vehicles (SSB 714 and 735) were joined together as one bi-directional vehicle. The vehicle had no additional doors, so only the two doors in the direction of travel got available, which, however, suit the Japanese tram fare collecting system. Also, they were regauged to fit into the 1,067 mm (3 ft 6 in) gauge. They were exported and used by Tosa Denki Tetsudō, then sold to and now being operated by Fukui Railway as their type F10 tram under the nickname "Retram" (レトラム).

  • Augsburg GT4 419 Augsburg GT4 419
  • Fukui Railway Type F10 (SSB 714 & 735) at their departure ceremony in Fukui Railway Fukui Railway Type F10 (SSB 714 & 735) at their departure ceremony in Fukui Railway
  • Iași GT4 #128 at its 60th anniversary in 2019 Iași GT4 #128 at its 60th anniversary in 2019

References

  1. ^ "Kurzgelenktriebwagen, Typ GT4" [Short articulated railcar, type GT4]. Landesstelle für Museumsbetreuung Baden-Württemberg (in German). 2014. Archived from the original on June 8, 2020. Retrieved June 8, 2020.
  2. "The RATP fleet".
  3. "Modernised tram presented to Iaşi". railwaygazette.com. DVV Media International. July 2, 2013. Archived from the original on June 8, 2020. Retrieved June 8, 2020.

External links

Categories: