This is an old revision of this page, as edited by Mulsannescorner (talk | contribs) at 01:09, 16 February 2009 (There are effectively no dimensional differences between the P2 and P1 Lola and no regulatory differences; P1 and P2 maximum overhang dimensions are identical). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.
Revision as of 01:09, 16 February 2009 by Mulsannescorner (talk | contribs) (There are effectively no dimensional differences between the P2 and P1 Lola and no regulatory differences; P1 and P2 maximum overhang dimensions are identical)(diff) ← Previous revision | Latest revision (diff) | Newer revision → (diff)
The Lola B06/10 is a Le Mans Prototype developed by Lola Cars International for use in the LMP1 class of the American Le Mans Series, Le Mans Series, and 24 Hours of Le Mans. It was developed in 2006 as a replacement for the Lola B2K/10 as well as the MG-Lola EX257. It shared much of its mechanical elements and design with the LMP2 class Lola B05/40, which was developed the year prior.
Development
Due to similarity in the new regulations between LMP1 and LMP2, Lola was able to easily develop an all new LMP1 car based on their existing and successful B05/40 LMP2. Sharing most of the design elements evolved from the MG-Lola EX257, the B06/10 would bring them to a larger scale meant for larger engines than the LMP2 class allowed. This would include increased cooling and air management, as well as the ability to carry much larger engines as well as turbochargers.
Although the nose of the B06/10 is nearly identical to the B05/40, among the most noticeable differences is the use of larger brake ducts between the fenders and raised nose then those seen on the B05/40. Instead of NACA ducts, large squared off openings would be used to collect more air, even if it increased drag. The sides of the car would also include larger openings for the radiators, while extra vents were used to draw away heat and unnecessary air. Unlike the B05/40 though, inlets for the turbochargers would be moved from their position next to the cockpit, to a new position integrated into the rear wheel fenders, partially because two intakes were necessary on the B06/10 while only a single was needed on the B05/40.
For engines, the B06/10 was specifically designed around the use of either the Advanced Engine Research (AER) P32T twin-turbocharged 3.6 Litre V8 or the Judd GV5 naturally aspirated 5.0 Litre V10. While the GV5 has yet to be used, an upgraded GV5.5 S2 5.5 Litre V10 was put into use by Charouz Racing Systems in 2007. Swiss Spirit have also installed an Audi twin-turbocharged 3.6 Litre V8 for the 2007 season, with assistance from Audi Sport.
Modifications
Like the B05/40, the B06/10 has been continually upgraded by Lola. For 2007 aerodynamic improvements nearly identical to those seen on the B05/40, which included the replacement of the two large ducts between the fenders with a large single dict in a slightly raised nose. This has led to some of the cars to be named B07/10, while the older cars tend to keep the B06/10 name. Some modification to the design of the B06/10 was necessary for Swiss Spirit's Audi V8 to be able to be used, although it was minor.
Racing history
For 2006, three B06/10s would be sold two two teams. Dyson Racing would run two cars in the American Le Mans Series while Chamberlain-Synergy would run a single entry in the Le Mans Series, as well as at the 24 Hours of Le Mans. Dyson's AER-powered cars would struggle in the ALMS, taking no wins yet finishing second to the dominant Audi R10. Chamberlain-Synergy would see similar results, tying for second in the Le Mans Series with no wins as well, beaten by the dominant Pescarolo Sport team.
For 2007, Dyson sold their two B06/10s, with one being bought by Team Cytosport for select rounds of the ALMS, while the second was originally sold to Velocity Motorsports. Intersport Racing bought the car from Velocity to use for the final two races of the ALMS season. Chamberlain-Synergy on the other hand retained their car, and were joined by the Charouz Racing Systems Judd-powered entry and Swiss Spirit's Audi-powered car for the Le Mans Series and 24 Hours of Le Mans.
External links
- Template:PDFlink - B06/10 specifications
- Mulsannes Corner - Lola B06/10 technical analysis
 Lola sports cars | |
|---|---|
| Early projects (1958–1968) | |
| Group 7 / Can Am (1967–1974) | |
| Group 5 / Group 6 (1970–1981) | |
| Sports 2000 (1976–2007) | |
| Can Am (1977–1986) | |
| Group C / IMSA GTP (1982–1992) | |
| LMP / SR (1998–2014) | |
| Daytona Prototype (2008–2012) | |