Misplaced Pages

Tantalum carbide

Article snapshot taken from Wikipedia with creative commons attribution-sharealike license. Give it a read and then ask your questions in the chat. We can research this topic together.

This is an old revision of this page, as edited by Materialscientist (talk | contribs) at 23:44, 14 June 2011 (correction per talk). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Revision as of 23:44, 14 June 2011 by Materialscientist (talk | contribs) (correction per talk)(diff) ← Previous revision | Latest revision (diff) | Newer revision → (diff)
Tantalum carbide
Tantalum carbide
Names
Other names tantalum (IV) carbide
Identifiers
CAS Number
ECHA InfoCard 100.031.914 Edit this at Wikidata
CompTox Dashboard (EPA)
Properties
Chemical formula TaCx
Appearance brown-gray odorless powder
Density 14.3 g/cm (TaC)

15.1 g/cm (TaC)

Melting point 3880 °C (TaC)
3327 °C (TaC0.5)

Boiling point 4780 °C (TaC)
Solubility in water insoluble
Solubility HF-HNO3 mixture
Structure
Crystal structure rock salt (TaC)
trigonal (TaCx)
Related compounds
Except where otherwise noted, data are given for materials in their standard state (at 25 °C , 100 kPa). checkverify (what is  ?) Infobox references
Chemical compound

Tantalum carbides form a family of binary chemical compounds of tantalum and carbon with the empirical formula TaCx, where x usually varies between 0.4 and 1. They are extremely hard, brittle, refractory ceramic materials with metallic electrical conductivity. They appear as brown-gray powders which are usually processed by sintering. Being important cermet materials, tantalum carbides are commercially used in tool bits for cutting applications and are sometimes added to tungsten carbide alloys. The melting points of tantalum carbides peak at about 3880 °C depending on the purity and measurement conditions; this value is among the highest for binary compounds. Only tantalum hafnium carbide has a distinctly higher melting point of about 4215 °C, whereas the melting point of hafnium carbide is comparable to that of TaC.

Preparation

TaCx powders of desired composition are prepared by heating a mixture of tantalum and graphite powders in vacuum or inert gas atmosphere (argon). The heating is performed at temperature of about 2000 °C using a furnace or an arc-melting setup. An alternative technique is reduction of tantalum pentoxide by carbon in vacuum or hydrogen gas atmosphere at a temperature of 1500-1700 °C. This method was used to obtain tantalum carbide back in 1876, but it lacks control over the stoichiometry of the product.

Crystal structure

TaCx compounds have a cubic (rock-salt) crystal structure for x = 0.7–1.0; the lattice parameter increases with x. TaC0.5 has two major crystalline forms symmetry. The more stable one has an anti-cadmium iodide-type trigonal structure which transforms upon heating to about 2000 °C into a hexagonal lattice with no long-range order for the carbon atoms.

Formula Symmetry Type Pearson symbol Space group No Z ρ (g/cm) a (nm) c (nm)
TaC Cubic NaCl cF8 Fm3m 225 4 14.6 0.4427
TaC0.75 Trigonal hR24 R3m 166 12 15.01 0.3116 3
TaC0.5 Trigonal anti-CdI2 hP3 P3m1 164 1 15.08 0.3103 0.4938
TaC0.5 Hexagonal hP4 P63/mmc 194 2 15.03 0.3105 0.4935

Here Z is the number of formula units per unit cell, ρ is the density calculated from lattice parameters.

Properties

The bonding between tantalum and carbon atoms in tantalum carbides is a complex mixture of ionic, metallic and covalent contributions, and because of the strong covalent component these carbides are very hard and brittle materials. For example, TaC has a microhardness of 1800 kg/mm and an elastic modulus of 285 GPa, whereas the corresponding values for tantalum are 110 kg/mm and 186 GPa. The hardness, yield stress and shear stress increase with the carbon content in TaCx. Tantalum carbides have metallic electrical conductivity, both in terms of its magnitude and temperature dependence. TaC is a superconductor with a relatively high transition temperature of TC = 10.35 K.

The magnetic properties of TaCx change from diamagnetic for x ≤ 0.9 to paramagnetic at larger x. An inverse behavior (para-diamagnetic transition with increasing x) is observed for HfCx, despite it has the same crystal structure as TaCx.

See also

References

  1. ^ Physical Constants of Inorganic Compounds in Lide, D. R., ed. (2005). CRC Handbook of Chemistry and Physics (86th ed.). Boca Raton, Florida: CRC Press. pp. 4–44 ff. ISBN 0-8493-0486-5.
  2. John Emsley (11 August 2003). Nature's building blocks: an A-Z guide to the elements. Oxford University Press. pp. 421–. ISBN 9780198503408. Retrieved 2 May 2011.
  3. The claim of melting point of 4000 °C in TaC0.89 is based not on actual measurement but on an extrapolation of the phase diagram, using an analogy with NbC, see Emeléus
  4. ^ Harry Julius Emeléus (1968). Advances in Inorganic Chemistry and Radiochemistry. Academic Press. pp. 174–176. ISBN 9780120236114. Retrieved 3 May 2011.
  5. ^ Lonnberg, B; Lundstrom, T; Tellgren, R (1986). "A neutron powder diffraction study of Ta2C and W2C". Journal of the Less Common Metals. 120 (2): 239–245. doi:10.1016/0022-5088(86)90648-X.
  6. ^ Rudy, Erwin; Brukl, C. E.; Windisch, Stephan (1968). "Constitution of Ternary Ta-Mo-C Alloys". Journal of the American Ceramic Society. 51 (5): 239–250. doi:10.1111/j.1151-2916.1968.tb13850.x.
  7. Joly, A. (1876). Compt. Renal. 82: 1905. {{cite journal}}: Missing or empty |title= (help)
  8. Lavrentyev, A; Gabrelian, B; Vorzhev, V; Nikiforov, I; Khyzhun, O; Rehr, J (2008). "Electronic structure of cubic HfxTa1–xCy carbides from X-ray spectroscopy studies and cluster self-consistent calculations". Journal of Alloys and Compounds. 462: 4–10. doi:10.1016/j.jallcom.2007.08.018.
  9. ^ Valvoda, V. (1981). "X-ray diffraction study of Debye temperature and charge distribution in tantalum monocarbide". Physica Status Solidi (a). 64: 133–142. doi:10.1002/pssa.2210640114.
  10. Yvon, K.; Parthé, E. (1970). "On the crystal chemistry of the close-packed transition-metal carbides. I. The crystal structure of the -V, Nb and Ta carbides". Acta Crystallographica Section B Structural Crystallography and Crystal Chemistry. 26 (2): 149–153. doi:10.1107/S0567740870002091.
  11. Bowman, A. L.; Wallace, T. C.; Yarnell, J. L.; Wenzel, R. G.; Storms, E. K. (1965). "The crystal structures of V2C and Ta2C". Acta Crystallographica. 19: 6–9. doi:10.1107/S0365110X65002670.
  12. Oyama, S. Ted (1996). The chemistry of transition metal carbides and nitrides. Springer. pp. 29–30. ISBN 9780751403657. Retrieved 3 May 2011.
  13. Aleksandr Ivanovich Gusev; Andreĭ Andreevich Rempel; Andreas J. Magerl (2001). Disorder and order in strongly nonstoichiometric compounds: transition metal carbides, nitrides, and oxides. Springer. pp. 513–516. ISBN 9783540418177. Retrieved 3 May 2011.
Tantalum compounds
Tantalum(II)
Tantalum(III)
Organotantalum(III)
  • Ta(SiOBu)3
  • Tantalum(IV)
    Tantalum(V)
    Organotantalum(V)
  • Ta2(OC2H5)10
  • TaC5H15
  • TaCl2(CH3)3
  • Ta(C2H6N)5
  • TaCp2H3
  • Categories: