Misplaced Pages

This is an old revision of this page, as edited by Michael Glass (talk | contribs) at 07:01, 27 September 2011 (→Public administration and journalism: More concise wording.). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Metrication is the process of introducing metric units for measurement. Proposals that the British people should use a decimal system date back to at least the 1668 paper of John Wilkins. The adoption of metric units has also been discussed intermittently by Parliament since 1818. A formal policy of metrication started in 1965.

In its accession treaty to the European Economic Community, the UK government agreed to drop the use of non-metric units for selling goods by 1978. By 1980 most pre-packaged goods were sold by metric measure, but the mandatory use of metric units for packaged goods only took effect in 1995. Mandatory metric measures for goods sold loose or from bulk began in 2000. The use of "supplementary indications" (Imperial units given alongside the metric) was originally permitted for a limited period only, but that period was extended a number of times. In 2007, rather than extend the cut-off date for the use of supplementary units again, the EU announced that supplementary units could be used indefinitely.

Metrication has been opposed and even resisted by some of the British public. As of 2011, Imperial units remain in common and widespread usage amongst people of all ages and in the media, particularly for describing body measurements, journey distances and vehicle speeds. At school pupils are taught metric units in subjects, however, in mathematics, school pupils are taught "rough metric equivalents of imperial units still in daily use", but are not taught how to manipulate Imperial units.

Legal requirements

Since 1 January 2000, most loose goods sold by weight, volume or length must, by law, be measured and sold by metric units, with the display of imperial units being permitted as "supplementary indications", on the condition that they are written in characters no larger than the metric measurement.

Non-metric units, allowed by UK law for economic, public health, public safety or administrative use from 1 January 2000, are limited to:

• the mile (1.609 km), yard (91.44 cm), foot (30.48 cm) and inch (2.54 cm) for road traffic signs, distance and speed measurement,
• the pint (568 ml) for the dispensing of draught beer and cider, and for the sale of milk in returnable containers,
• the troy ounce (~31 g) for transaction in precious metals.

Goods and services sold by a description are not covered by weights and measures legislation. Thus, a fence panel sold as "6 foot by 6 foot" is legal, as is a 6 x 4 inch photograph frame, but a pole sold as "50 pence per linear foot" (with no accompanying metric price) would be illegal.

There are no plans to change road signs and road speed measurement to metric units. On 23 February 2006 Alistair Darling, then Secretary of State for Transport, confirmed on the BBC Question Time programme that the Government had abandoned its previously long-standing plans to convert the UK's 2 million road signs to metric, purely on the grounds of cost.

Current usage

Many aspects of life are metric including industry, building, education and some sports such as rugby union but many imperial relics remain including road signs, estate agents' advertisements and the non-specialist media.

Weather

Most radio and television weather reports give temperatures in degrees Celsius, with approximate conversions into degrees Fahrenheit. Snow and rainfall are generally reported in millimetres with the inch equivalents. Wind speeds are generally given in miles-per-hour.

Retail

Groceries

While several food items continue to be packaged and sold in sizes based on Imperial units, many now display only the uneven metric equivalent value on the label (such as 454 or 907 grams for 1- or 2-pound packages). Items include jam, marmalade, honey, dates, strawberries, sausages, beefburgers, fresh coffee, malt vinegar, and Christmas puddings.

Major supermarket chains continue to sell own-labelled cow's milk in 1-, 2-, 4- and 6-pint plastic bottles with the uneven metric equivalent value always shown before the Imperial volume (if that is shown at all). However these same chains sell own-labelled other milks (goat milk, buffalo milk etc) plus most of the dairy-labelled cow's milk in litre-based units, and have been doing so for many years. However, they are gradually introducing more litre-based bottles (e.g. 1, 2, 3 litres) under their own label as well. In other shops, such as newsagents and convenience stores, milk is usually sold only in litre-based units.

Alcohol

In the United Kingdom, draught beer and cider are the only goods that may not be sold in metric units; the only legal measures for these drinks when sold on draught are 1⁄3 pint (190 ml) (rarely encountered), 1⁄2 pint (284 ml) and multiples of the latter. Bottled and canned beer is most often sold in 250ml, 330ml, 440ml and 500ml containers, the uneven metric 568ml (1 pint) containers are becoming rare now.

Cosmetics

Cosmetics and toiletries are often labelled both in metric units (grams or millilitres) and US customary units (ounces or US fluid ounces); this is standard practice throughout the world for goods intended for importation to the US, where dual labelling is compulsory. The US fluid ounce is 4% larger than its imperial counterpart (29.6 ml as against 28.4 ml).

Clothes

Clothing is usually sold and marketed in inches and UK sizes, with the centimetre dimensions and continental size increasingly shown alongside the Imperial, with equal prominence.

Sport

Sporting bodies vary in their preference for metric or imperial units. For example, the Premier League uses just metric measures on soccer players' profiles and so do several of the teams However, other teams use both measures but put Imperial measurements first. and several teams do not publish this information. The English Rugby Football Union provides information about the height and weight of players in both measures but puts the metric units first. Cricket does not give information about the height or weight of cricketers, but the laws of cricket, though giving both measures, put Imperial units first. British weightlifting records use kilograms for the weight of both competitors and the weights that they lift and athletics uses metric measures but horse racing uses Imperial measures for the weight of the jockeys and the lengths the horses run.

National Health Service

On 25 February 2010, concern was expressed in the House of Lords at the continued use of Imperial units for weighing patients in National Health Service hospitals and facilities. Drug doses for patients are now worked out on their weight in kilograms, so using Imperial or switchable scales is a risk to the patients. The British Government announced it was taking steps to remedy this situation and insist that all NHS facilities complied with the requirement that all weighing scales displayed only metric units.

Public administration and journalism

The approach taken to metrication by writers in various parts of British society varies considerably. The civil service is bound by law to follow EU directives relating to public administration while journalists are not bound by such restrictions.

Newspapers styles vary. While both The Guardian' and The Times prefer metric units in most circumstances, and both provide exceptions where imperial units are preferred, they differ on some details.

The Times specifies that heights and weights put Imperial measures first while the Guardian's examples are from metric to Imperial. Similarly, while both give first place to hectares, the Guardian prefers square kilometres (with square miles in brackets) while the Times prefers square miles. Both retain the preference for the mile in expressing distances. In contrast, The Economist prefers metric units for "most non-American contexts," except for the United States section where "you may use the more familiar measurements." However, The Economist also specifies "you should give an equivalent, on first use, in the other units".

These rules of style have led to inconsistencies between administrative documents and the resulting news reports. Examples include:

• On 18 March 2005 Johnson Beharry was awarded the Victoria Cross for valour while serving in Iraq. The official citation included the text "...drive the vehicle through the remainder of the ambushed route, some 1500m long". The BBC, in paraphrasing the citation, used the expression "He guided the column through a mile of enemy ground".
• The Channel Tunnel Rail Link carries traffic from the Channel Tunnel to London. Government reports cited the design speed on the link as being 300 km/h while the BBC cited speeds of 186 mph.

The units of measure used on web pages associated with the British monarchy vary in a similar way. For instance, the Jubilee Walkway Trust's 60 km walking path commemorates the Queen's diamond jubilee (one kilometre per year of the Queen's reign), but a privately produced publicity pamphlet for the trail shows it as being 37 miles. The official website describing the royal residences (URL: .royal.gov.uk - the government website) and the Prince's Rainforests Project (which is scientifically-oriented) use metric units. However, the “private” websites (URL: .co.uk or .com) describing Balmoral Castle and the Sandringham estate use miles for distances but hectares for areas.

Maps produced by the Ordnance Survey used imperial units until 1945 on civilian maps, but a metric grid was used by War Office maps from 1920 onwards.

Road system

Road signs in Great Britain are regulated by Traffic Signs Regulations and General Directions (TSRGD) which requires units of measure to be in miles and yards (for distances), feet and inches (for heights, widths and lengths) though metric heights and widths are allowed as an optional supplementary indicator on some height and width limit signs. Weight limits are expressed in tonnes and the legislation permits either "t" (the SI symbol for tonnes) or "T" (clashing with the SI symbol for teslas) to be used as the abbreviation for "tonnes" on road signs. Speed limits are in miles per hour, but no units are shown on the signs. Advance-warning signs display distances in miles often using the character "m" as an abbreviation (clashing with the SI use of "m" as the symbol for metre). When SI units are used, such as metre on height and width restriction signs if the optional metric-measurement is given, the SI symbol "m" is correctly used.

Advance-warning signs for road works and other temporary road obstructions are generally positioned at multiples of 100 metres from the feature to which they refer, with the distances indicated in yards - to the nearest 100 yards (which is within the 10% tolerance allowed) in order to comply with the TSRGD requirement for yards to be used on such road signs.

In TSRGD 1994 the legislation relaxed the "Imperial only" rule for many (but not all) height limit warning and prohibition signs and permitted such signs to display metric "supplementary indications". In TSRGD 2002 the legislation further relaxed the rules to allow many (but not all) width limit signs to display metric. The regulations require the supplementary metric value to appear above the imperial value on the sign if it is present at all. Vehicle length warning and prohibition signs are still required to be imperial only. In late 2009 and early 2010, the DfT proposed modifying the legislation to make it mandatory to use dual units signs for height and width limit warning and restriction signs. This was because

"approximately 10–12% of bridge strikes involved foreign lorries. This is disproportionately high in terms of the number of foreign lorries on the road network." (Paragraph 53 of the Impact Analysis)

As of May 2011, the legislation resulting from the consultation that deals with metric signs has still not made it to Parliament.

Since the late 1960s, British roads have been designed using metric units. Location marker posts were erected at 100-metre intervals on the hard shoulder giving the distance from a notional reference point in kilometres to enable maintenance workers, emergency services and the like to pinpoint specific points on the motorway. The digits on these posts were barely visible to motorists. This number was also encoded into the emergency phones that could be used by stranded motorists. The advent of the mobile phone meant that the location of motorists could no longer be pinpointed by reference to the emergency telephone that they were using. To enable such motorists to communicate with the emergency services, driver location signs were erected at approximately 500-metre intervals in England during the period 2007 to 2010. These signs replicate the distances shown on the smaller location marker posts though no units are shown, but don't appear (yet) on Welsh motorways.

Motor vehicles

Although motor fuel has been retailed in litres since the 1980s, fuel consumption is still commonly quoted in miles-per-gallon, and news reports may still refer to fuel prices in pounds-per-gallon.

Almost all motor vehicles first used on public roads on or after 1 April 1984 are required to have speedometers fitted which can display speeds in both miles per hour and kilometres per hour (simultaneously or separately).

Metric units (kW for power, km/h for speed, kg for weight and cc for engince capacity) are used in legislation relating to driving licences.

Railway systems

An 1845 Act of Parliament fixed British rail gauges at 4 ft 8.5 in and Irish rail gauges at 5 ft 3 in. The 4 ft 8.5 in gauge was the basis of 60 % of the world's railways, but is expressed as 1435 mm (including the United Kingdom) - a decrease of 0.1 mm, but well within the engineering tolerances. The Irish 5 ft 3 in gauge is now referred to as a 1600 mm gauge – the difference between the metric and imperial values being 0.2 mm, again well within engineering tolerances.

Rolling stock likewise is designed using metric units as it is required to meet the loading gauge requirements. (The British loading gauge is specific to Britain). However, track distances of most of Britain’s rail network are still shown in miles and chains on the identifier-plates affixed to every bridge on the network, and speeds and speed limits are in miles per hour, though metric units are used on the London Underground. Metric units are used throughout for engineering purposes, particularly on new and refurbished railway lines including the Channel Tunnel Rail Link, Tyne and Wear Metro, and Croydon metro.

Other exceptions

Other exceptions, common to many other countries, include aviation, shipping and rail transport – for example, the foot for aircraft altitude, nautical miles and knots – some of which are non-SI units, but accepted for use with SI.

The metric system is now used in the majority of industries. Clothing usually has dual labelling, but shoes are most often seen with traditional British sizes (though the Paris point sizes (exclusively) are not rare). Dual measures are often seen in the home entertainment and computer markets, for describing television, digital camera and monitor screen sizes. (The imperial size given for CRTs is typically that of the tube, whereas the metric measure – tagged 'vcm' – is that of the visible screen excluding the bezel). Products that may appear to be Imperial are actually manufactured to metric specifications, using metric drawings and made on metric machines, even if references to Imperial units persist in some areas. The coopers' trade is one of the exceptions to this rule.

Advocacy groups

Groups such as the British Weights and Measures Association and Active Resistance to Metrication (ARM) are actively opposed to metrication in the UK. In 2005, these activists claimed success against York City council's erection of 30 hiking trail signs with kilometre distance markings. Conceding that the law did not authorise them, the council agreed to cover the metric markings with plastic discs. ARM supporter Peter Rogers said: "Each time we are successful , it is a small but significant step towards eradicating them from our country. The Imperial weights and measures of this country are part of our traditions and part of our culture. The attempt to impose metric signs is one by stealth and deception and has been going on for many years." A Council spokeswoman said: "This was a genuine error and as soon as it was brought to our attention, we took measures to amend it. Giving information on a footpath sign such as the distance and destination is discretionary and we thought the public would appreciate this extra detail. The Ordnance Survey maps that we use to measure the footpaths are metric and the walk packs that we sell describe walks in kilometres, so it made sense to the officer who ordered the signs to give corresponding information."

A pro-metric group, the UK Metric Association, summarised the situation as "British weights and measures are in a mess. This is because although many aspects of national life are metric (including most industry and building, school mathematics and science, athletics, rugby union and Ordnance Survey maps), many imperial relics remain (e.g. in road signs, football commentaries, estate agents' advertisements and most non-specialist media)."

History

Before 1799

When James VI of Scotland inherited the English throne in 1603, England and Scotland had different systems of measure. This situation continued for another century even though, in 1670, John Wilkins, the first president of the Royal Society, published his proposal for a metric system of measure. In 1707, under the Act of Union, the Parliaments of England and Scotland were merged and the English units of measure became the standard for the United Kingdom.

Although British inventor James Watt called for the creation of a global measurement system in 1783, a letter of invitation in 1790 from the French National Assembly to the British Parliament to help create such a system received no reply. The French continued alone and created the foundations of what is now called Système International d'Unités and is the sole measurement system for most of the world.

One of the earliest metric measuring devices predated Wilkin's paper - in 1620 the English clergyman and mathematician Edmund Gunter introduced two new units of measure - the chain and the link, and a new measuring device Gunter's chain. Gunter's chain was one chain (one tenth of a furlong) in length and consisted of 100 links, making each link 0.001 furlongs. The decimal nature of these units and of the device made it easy to calculate the area of a rectangle of land in acres and decimals of an acre.

1799–1945

In 1799 the French adopted the metre and the kilogram as their new units of length and mass. As use of the new system, originally called the "Decimal System", grew through Europe, pressure grew in the UK for decimalisation. The issue of decimalisation of measurement was intertwined in the UK with decimalisation of currency. The idea was first discussed by a Royal Commission that reported in 1818 and again in Parliament by Sir John Wrottesley in 1824. Another Royal Commission was set up 1838 by Chancellor of the Exchequer Thomas Spring Rice and it reported in 1841 that decimal coinage was required first. A third commission advocated in 1853 decimal coinage in the form £ : 10 florin : 100 cent : 1000 mil. The first florins (one tenth of a pound sterling) were struck in 1849 as silver coins weighing 11.3 grams and having a diameter of 28 millimetres. In the London Tavern on Bishopsgate St. 1854 Sir John Wrottesley set up the "Decimal Association" in order to lobby for decimalisation of both measurement and coinage. An early supporter of the Decimal Association was the mathematician Augustus de Morgan whose articles supporting the metric system had been published in the Penny Cyclopeadia (1833) and The Companion to the Almanac (1841).

Sir John met with Gladstone a few days later but was unable to win him to the idea. In 1862, the Select Committee on Weights and Measures favoured the introduction of decimalisation to accompany the introduction of metric weights and measures. A further Royal Commission "on the question of the introduction of metric system of weights and measures" also reported in 1869.

On the legal front, 1864 saw a Private Member's Bill pass which legalised use of the metric system in contracts. However, ambiguous wording of the 1864 law meant that traders who possessed metric weights and measures were still liable to arrest under Acts 5 and 6 William IV c63.

In 1875 a British delegation was one of twenty national delegations to a convention in Paris that resulted in seventeen of the nations signing the Metre Convention on 20 May 1875 which resulted in the setting up of the three bodies: the CGPM, CIPM and BIPM that were charged with overseeing weights and measures on behalf of the international community. The United Kingdom was one of the countries that declined to sign the convention. In 1882 the British firm Johnson, Matthey & Co secured an agreement with the French government to supply 30 standard metres and 40 standard kilograms. Two years later the United Kingdom signed the treaty and the following year it was found that the standard yard which had been in use since 1855 had been shrinking at the rate of one part per million every twenty years. In 1889 one of the standard metres and one of the standard kilograms that had been cast by Johnson, Matthey & Co were selected at random as the reference standard and the other standards, having been cross-correlated with each other were distributed to the signatory nations of the treaty.

In 1896 Parliament passed the Weights and Measures (Metric System) Act, legalising metric units for all purposes but not making them compulsory.

The situation was clarified in 1897 following another Select Committee which also recommended that metrication become compulsory by 1899. In 1904, scientist Lord Kelvin led a campaign for metrication and collected 8 million signatures of British subjects. Two years previously an Empire conference decided that metrication should be compulsory across the British Empire. On the opposition side, 1904 saw the establishment of the British Weights and Measures Association for "the purpose of defending and, where practicable, improving the present system of weights and measures". At this time 45% of British exports were to metricated countries. Parliament voted to set up a Select Committee on the matter.

This Select Committee reported in 1907 and a bill was drafted proposing compulsory metrication by 1910, including decimalisation of coinage. The opposition declared that decimalisation of coinage would cost £100m alone.

1945 to 1973

The matter was dropped in the face of wars and depression, and would not be again raised until the 1951 Hudgson Report, the result of yet another Select Committee.

The Hudgson Report recommended compulsory metrication and currency decimalisation within 10 years. It said "The real problem facing Great Britain is not whether to adhere either to the Imperial or to the metric system, but to maintain two legal systems or to abolish the Imperial." The report also recommended that the change should be done in concert with the Commonwealth (former Empire) and the USA. It also pointed out that metric standards were more accurate than Imperial ones, and that the yard and pound should be pegged to definite metric values. This was done by international agreement in 1959 and currently the yard is defined as 0.9144 metres exactly, and the pound as 0.453 592 37 kg exactly. Agreement could not be reached on the pint (and gallon), and this value still differs between the UK and US (the only countries that maintain legal definitions of these units).

In 1965 the Board of Trade and the Confederation of British Industry declared their full support for metrication and decimalisation. Currency decimalisation finally took place on Decimal Day, 15 February 1971, although £1 did not change in value. The Metrication Board was set up in 1969. Unlike its South African and Australian counterparts which had mandatory powers, it only had an "advisory, educational and persuasive role". Metric units have been taught in UK schools since the late 1960s (and exclusively since 1974), and certain industries also converted or largely converted decades ago. For example the paper industry converted in 1970, and the construction industry between 1969 and 1972 – although certain products continue to be produced to with reference to Imperial trade names but made using metric dimensions in the factory; for example, a 13 mm thick plasterboard is still often called 'half-inch', even though the measurement is rounded to a convenient metric size and so is now only approximately half an inch thick.

A Commons debate in 1970 on the introduction of compulsory metrication ended in farce. The governing Labour party was then unpopular and the opposition Conservatives revolted on the issue. Examples include these Conservative MPs' speeches:

• Robert Redmond: "When I have travelled abroad and particularly on the Continent, I have noticed that people have on their desks calculating machines while we in Britain do the same sums in our heads." (In 1970 the United Kingdom still used pounds, shillings and pence).
• Henry Kerby: "This metric madness, this alien academic nonsense, introduced secretly through the back door by a bunch of cranks and the big business tycoons... and put into clandestine operation."
• Carol Mather: "I am led to the conclusion that comprehensive universal metrication is a bit of a nonsense... there is a gap between the millimetre and the metre, there is no centimetre.... The kilo is too heavy for the housewife to carry and we know that in France and Denmark they use the old system of the pound."

The press reports on the debate, particularly those of The Daily Telegraph and The Times, were very favourable to the opinions of the Conservatives. Following the debate the projected deadlines for the phased metrication steps were delayed one by one. The original intention of metrication "in concert with the Commonwealth" backfired; Australia, New Zealand and South Africa all completed their metrication processes by 1980, the year that the Metrication Board was abolished as a cost-cutting measure. (In contrast, the situation of metrication in Canada resembles that of the UK, except that all road signs were converted in the 1970s.) The last laws which restricted the sale of metricated goods were only removed in 1995; though it is still illegal to sell draught beer in metric units, which in 2002 led to an Austrian-themed pub being asked to stop selling beer by the half litre traditional German steins.

1973 onwards

Before the UK joined the European Community in 1973, the only units of measure that were legally defined were those pertaining to length, area, volume and "mass or weight" .

When the UK joined the European Community (now the European Union) it was obliged to accept into its national law within five years all EEC directives that were then in force. This included directive 71/354/EEC. This directive catalogued units of measure that might be used and for "economic, public administration, public health or public safety purposes". It also catalogued those units whose use was permitted only until the end of 1977. For many EU countries, these directives meant dropping the pfund, livre, pond, etc., in favour of "500 g", but in the case of the United Kingdom and the Republic of Ireland it meant the completion of their metrication programmes which in the case of the United Kingdom had been under way since 1965. It also required the United Kingdom to formally define a number of other units of measure including those for electric current (ampere), electric potential difference (volt), temperature (degree Celsius and kelvin), pressure (pascal), energy (joule), power (watt) and so on.

Originally, European law required the UK government to eliminate almost all non-metric units when used for goods and services sold by quantity by 31 December 2009. In January 2007 the Department of Trade and Industry announced that "the Government intends to support the continued use of supplementary indications after 2009 for an indefinite period" – this appeared to indicate that the British Government was in favour of obtaining an indefinite derogation on the use of dual metric/Imperial markings. On 10 September 2007 the European Commission published a proposed amendment to EU Directive 80/181/EEC that would permit "supplementary indicators" to be used indefinitely.

Indecision and political opposition led the UK government to renegotiate this date first to 31 December 1989, then 1994, 1999 and recently to 31 December 2009. The involvement of the European Commission has led metrication to be linked in the public mind with euroscepticism, and the traditionally eurosceptic British press has taken a dim view of the process. Example stories include the Daily Star, which on 17 January 2001 claimed that beer would soon have to be sold by the litre. Today in the UK, bottled beer is most often sold in 500 ml bottles (and also 330 ml and 250 ml "stubbies"), though pint bottles are also available. Milk is most often sold by the pint, but 500 ml cartons are not unusual.

The European Union Units of Measurement Directive as amended by Directive 89/617/EEC required the UK government to pass laws in 1994 finally permitting the sale of goods using metric labelling, while permitting dual measurement. Public reaction to these regulations was negative . Such suspicion of externally-imposed change has long traditions; as Philip Grierson notes, the town of Lincoln paid "lavish" fines in 1201 rather than use government-imposed reformed weights and measures. Steve Thoburn applied to the European Court of Human Rights on the basis that his human rights had been violated but the court decided that no violation had occurred. George Gardiner of the Federation of Small Businesses called (without apparent response) for a civil disobedience campaign. In 1999 further laws were brought metricating the sale of, among other things, fresh fruit. The "Metric Martyrs" were shop owners that were fined for refusing to use metric units.

In August 2005, the European Commission announced it would require Britain to set a legal deadline for the completion of metrication. However, on 9 May 2007, Industry Commissioner Günter Verheugen announced that the European Commission had dropped its plans to enforce the abolition of Imperial measures from 2010. This means that 'supplementary' imperial indications will be able to continue indefinitely alongside, but not instead of metric units after that date. Furthermore, in a letter to the British MEP Ashley Mote dated 5 June 2007, Commissioner Verheugen announced that in relation to the mile and the pint, "the Commission has no intention to endanger the historical and cultural traditions of Member States."

Costs

The costs of metrication in the UK have not been reliably calculated. True scientific calculations of the potential costs have been fairly rare, and tend to refer to specific proposals.

A 2005 report pointed to the metrication of the UK's 2 million road signs as the major cost of completing the United Kingdom's metrication program. The Department for Transport (DfT) costed the replacement of all of the United Kingdom's road signs in a short space of time at between £565 million and £644 million In 2008–09, before the outcome of the consultations that led to the EU directive 2009/3/EC was known, the DfT had a contingency of £746 million for the metrication of roads signs. In contrast, the United Kingdom Metrication Association, in a report published in 2006 and using a model based on the Irish road sign metrication program estimated the cost of converting road signs to be £80 million, spread over 5 years (or about 0.25% of the annual roads budget).

A 1970s study by the UK chemical industry estimated costs at £6m over seven years, or 0.25% of expected capital investment over the change period.

Some 90% of UK exports go to metric countries (as only Liberia, Burma and the United States have not adopted the International System of Units ), and there are costs to business of maintaining two production lines (one for exports to the US in Imperial, and the other for domestic sales and exports to the rest of the world in metric). These have been estimated at 3% of annual turnover by the Institute of Production Engineers, and at £1100 million (1980) per annum by the CBI. Regardless of UK metrication, goods produced in the UK for export to the US would have still been labelled in non-metric units to comply with the US Fair Packaging and Labelling Act.

See also

• International System of Units
• Metrication opposition
• Imperial system

References

1. ^ "South East Plan Technical Note 3 Transport – para 4.34" (PDF). South East England Regional Assembly. March 2006. Retrieved 3 April 2010.
2. ^ "High-speed rail line switched on". BBC. 8 January 2007. Retrieved 3 April 2010.
3. "An Essay towards a Real Character and a Philosophical Language (Reproduction)" (PDF). Retrieved 2 August 2011.
4. "An Essay towards a Real Character and a Philosophical Language (Transcription)" (PDF). Retrieved 2 August 2011.
5. Metric martyrs take a mile, The Guardian 9 May 2007.
6. Mathematics - The National Curriculum for England Key stages 1–4, Joint publication by Department for Education and Employment and Qualifications and Curriculum Authority 1999.
7. ^ "Weights and Measures Act 1985 (c. 72), section 8(2)(d)". Statutelaw.gov.uk. Retrieved 2 August 2011.
8. "– Question Time, Milton Keynes, 23 February 2006". BBC News. 23 February 2006. Retrieved 2 August 2011.
9. ^ "A very British mess" (PDF). United Kingdom Metrication Association. 2004. ISBN 0750310146.
10. "The Measuring Instruments (Capacity Serving Measures) Regulations 2006 (No. 1264)". Statutelaw.gov.uk. 4 July 2011. Retrieved 2 August 2011.
11. "Player Profile | Trevor Carson". Premierleague.com. Retrieved 2 August 2011.
12. "Philip Neville / Player Profile / evertonfc.com – The Official Website of Everton Football Club". Evertonfc.com. 21 January 1977. Retrieved 2 August 2011.
13. "Matthew Briggs player profile at Fulham FC". Fulhamfc.com. Retrieved 2 August 2011.
14. "1. Brad Jones - Liverpool FC". Liverpoolfc.tv. Retrieved 2 August 2011.
15. "Sunderland | Team | First Team". Safc.com. 9 April 2009. Retrieved 2 August 2011.
16. "Blackburn Rovers | Team | 1st Team Profiles | Christopher Samba". Rovers.co.uk. Retrieved 2 August 2011.
17. http://www.avfc.co.uk/page/PlayerProfiles/0,,10265~8152,00.html
18. "Frank Lampard | Profile, Biography & Pictures | Chelsea FC | Chelsea". Chelsea FC. Retrieved 2 August 2011.
19. "First Team Players - Players". Tottenhamhotspur.com. Retrieved 2 August 2011.
20. "19. Jack Wilshere | Players | First Team". Arsenal.com. Retrieved 2 August 2011.
21. "Everton Stats / Match / evertonfc.com – The Official Website of Everton Football Club". Evertonfc.com. Retrieved 2 August 2011.
22. http://www.rfu.com/SquadsAndPlayers/EnglandSaxons/Chris%20Robshaw.aspx
23. "HD Ackerman - Players - Stats". ECB. 14 February 1973. Retrieved 2 August 2011.
24. Website by the OTHER media. "Law 8 (The wickets) - Laws - Laws of Cricket - Laws & Spirit - Lord's". Lords.org. Retrieved 2 August 2011.
25. ^
26. "British Flat Jockeys Championship". Thepja.co.uk. 30 March 2011. Retrieved 2 August 2011.
27. "Exeter racecourse horseracing results, betting offers and horse racing calendar". Uk-racing-results.com. Retrieved 2 August 2011.
28. http://www.publications.parliament.uk/pa/ld200910/ldhansrd/text/100225-0001.htm. Parliamentary Debates (Hansard). House of Lords. 25 February 2010. col. 1081–1083. {{cite book}}: |chapter-url= missing title (help)
29. The Council of the European Communities (27 May 2009). "Council Directive 80/181/EEC of 20 December 1979 on the approximation of the laws of the Member States relating to Unit of measurement and on the repeal of Directive 71/354/EEC". Retrieved 8 June 2010.
30. "Style Guide". London: Guardian News and Media Limited. 19 December 2008. Retrieved 12 May 2010.
31. "Online Style Guide - M". London: Times Newspapers Ltd. 10 July 2009. Retrieved 12 May 2010.
32. "Style Guide". The Economist Newspaper Limited. 2010. Retrieved 8 June 2010.
33. "Honours and Awards". The London Gazette. 18 March 2005. Retrieved 3 April 2010.
34. "Soldier wins VC for Iraq bravery". BBC. 18 March 2005. Retrieved 3 April 2010.
35. Hugo Vickers (7 April 2010). "A route that puts the Diamond Jubilee on the map". London Evening Standard website. ES London Limited. Retrieved 19 June 2010.
36. "Jubilee Greenway Route Overview". Walk London. Retrieved 7 June 2011.
37. "The Royal Residences". The official website of The British Monarchy. The Royal Household. Retrieved 16 June 2010.
38. "The Prince's Rainforest Project - About us". The Prince's Rainforests Project. Retrieved 17 June 2010.
39. "Scottish Home to The Royal Family Balmoral - Welcome to Balmoral". Balmoral website. Balmoral Estates. Retrieved 16 June 2010.
40. "Sandringham - Farming". The Sandringham Estate. 2009. Retrieved 17 June 2010.
41. "Co-ordinate Converter". FieldenMaps.info. 4 May 2009. Retrieved 2011-005-30. {{cite web}}: Check date values in: |accessdate= (help)
42. ^ Statutory Instrument 2002 No. 3113 The Traffic Signs Regulations and General Directions 2002 - HMSO
43. International Bureau of Weights and Measures (2006), The International System of Units (SI) (PDF) (8th ed.), p. 118, ISBN 92-822-2213-6, archived (PDF) from the original on 4 June 2021, retrieved 16 December 2021
44. International Bureau of Weights and Measures (2006), The International System of Units (SI) (PDF) (8th ed.), p. 118, ISBN 92-822-2213-6, archived (PDF) from the original on 4 June 2021, retrieved 16 December 2021
45. International Bureau of Weights and Measures (2006), The International System of Units (SI) (PDF) (8th ed.), p. 116, ISBN 92-822-2213-6, archived (PDF) from the original on 4 June 2021, retrieved 16 December 2021
46. Traffic Signs Manual (PDF). Vol. Chapter 8, Traffic Safety Measures and Signs for Road Works and Temporary Situations, Part 1: Design (2nd ed.). London: Design Department for Transport/Highways Agency, Department for Regional Development (Northern Ireland), Transport Scotland and Welsh Assembly Government. 2009 . pp. 253–255. ISBN 978 0 11 553051 7. Retrieved 26 August 2011.
47. "Traffic Signs (Amendment) Regulations and General Directions (TSRGD) 2010" (PDF). Department for Transport. Retrieved 4 October 2010.
48. "Impact Assessment of the Traffic Signs (Amendment) Regulations and General Directions 2010 and of the Traffic Signs (Temporary Obstructions) (Amendment) Regulations 2010" (PDF). Department for Transport. Retrieved 8 December 2009.
49. Hansard. "21 Oct 2009 : Column 1446W". Retrieved 4 November 2009.
50. Highway Agency. "Driver Location Signs (Driver Location Signs)". Retrieved 7 June 2009.
51. Project Support Officer (Name blacked out) (1 February 2010). "Freedom of Information Response reference HAIL 8870045" (PDF). Highways Agency. Retrieved 6 June 2011.
52. "The Road Vehicles (Construction and Use) Regulations 1986: Section 35". UK Crown. Retrieved 6 June 2011.
53. "Council Directive 75/443/EEC of 26 June 1975 on the approximation of the laws of the Member States relating to the reverse and speedometer equipment of motor vehicles". Council of the European Communities. Retrieved 6 June 2011.
54. "Motorcycle licence requirements". DirectGov - Public services all in one place. Retrieved 25 August 2011.
55. "An Act for regulating the Gauge of Railways" (PDF). 18 October 1846. Retrieved 26 April 2010.
56. ^ "Guidance on Gauging" (PDF). Rail Safety and Standards Board Limited. 3 October 2009. Retrieved 26 April 2010.
57. "Line facts". Transport for London. Retrieved 26 April 2010.
58. "The Units of Measurement Regulations 1995". Opsi.gov.uk. 4 July 2011. Retrieved 2 August 2011.
59. "Council directive of 20 December 1979". Retrieved 2 August 2011.
60. "– Group hails 'miles better' signs". BBC News. 18 August 2005. Retrieved 2 August 2011.
61. "Undiscovered Scotland's description of the use of weights and measures in Scotland". Undiscovered Scotland. Retrieved 9 February 2010.
62. See An Essay towards a Real Character and a Philosophical Language
63. Watson, C. M. (1910), British Weights and Measures, London: John Murray, pp. 77–81.
64. "List of commissions and officials 1815-1829 (nos. 1-11)". British-history.ac.uk. 22 June 2003. Retrieved 2 August 2011.
65. Scott H Brown (2006). "The life and work of AUgustus de Morgan" (PDF). Applied Probability Trust. Retrieved 16 January 2011.
66. "Second report of the Commissioners appointed to inquire into the condition of the Exchequer (now Board of Trade) standards". Bopcris.ac.uk. 22 March 2011. Retrieved 2 August 2011.
67. "International Bureau of Weights and Measures - The Metre Convention". Bipm.org. Retrieved 2 August 2011.
68. http://www.platinummetalsreview.com/pdf/pmr-v17-i2-066-068.pdf
69. "Home". Megalithicsites.co.uk. Retrieved 2 August 2011.
70. "National Physical Laboratory - History of Length Measurement". Npl.co.uk. Retrieved 2 August 2011.
71. "Metrication timeline". UK Metric Association. 2009. Retrieved 8 December 2009.
72. Metrication and the UK Building Industry originally published 1995, accessed 28 July 2011
73. http://hansard.millbanksystems.com/commons/1970/oct/27/metrication#S5CV0805P0_19701027_HOC_425. Parliamentary Debates (Hansard). House of Commons. 27 October 1970. col. 76–168. Retrieved 25 August 2011. {{cite book}}: |chapter-url= missing title (help)
74. "– 'Metric' bar told to serve pints". BBC News. 9 October 2002. Retrieved 2 August 2011.
75. "Directive 71/354/EEC (bilingual text)". Eur-lex.europa.eu. Retrieved 2 August 2011.
76. "British Government position on "supplementary indications"". Bwmaonline.com. Retrieved 2 August 2011.
77. http://eur-lex.europa.eu/LexUriServ/LexUriServ.do?uri=COM:2007:0510:FIN:EN:PDF
78. Mark Townsend and Ned Temko. "Britain gave an inch. Now the EU wants 1.609km". Guardian. Retrieved 2 August 2011.
79. "EU gives up on 'metric Britain'". BBC News. 11 September 2007. Retrieved 12 May 2010.
80. "Estimating the cost of conversion of road traffic signs to metric units". Department for Transport. November 2005. Retrieved 29 December 2010.
81. "Annual Report and Resource Accounts 2008-09 (For the year ended 31 March 2009): page 377" (PDF). Department for Transport. 16 July 2009. Retrieved 14 March 2010.
82. Robin Paice (2006). Metric signs ahead. United Kingdom Metrication Association. ISBN 978-0-9552351-0-8.
83. Replacing distance signs only when they reach the end of their natural lives; replacing height, width and length restrictioon and warning signs over over a five year period and speed resitriction signs "overnight".
84. 1972 White Paper, 'Metrication' Cmnd 4880 (Summary and Conclusions)
85. The CIA world factbook

Bibliography

1. Grierson, Philip (1995). English Linear Measures: an essay in origins. 'The Stenton Lecture 1971', University of Reading.
2. McGreevy, Thomas (1995). The Basis of Measurement: Historical Aspects. Chippenham, Picton Pub. ISBN 0948251824.
3. McGreevy, Thomas (1997). The Basis of Measurement: Metrication and Current Practice. Chippenham, Picton Pub. ISBN 0948251840.
4. Linacre, Vivian T (2007). The General Rule. Butleigh : Squeeze. ISBN 1906069018.
5. Cairns, Warwick (2007). About the Size of It. London : Macmillan. ISBN 0230016286.

External links

• UK Government Department of Trade and Industry (policy statement)
• British Weights and Measures Association (anti-metric)
• UK metric association (pro-metric)

• Use dmy dates from August 2011
• Metrication by country
• Economy of the United Kingdom