Misplaced Pages

Uranium trioxide

Article snapshot taken from Wikipedia with creative commons attribution-sharealike license. Give it a read and then ask your questions in the chat. We can research this topic together.

This is an old revision of this page, as edited by 129.215.37.163 (talk) at 12:52, 29 March 2006 (removed information on uranyl compounds. Put them in the entry on the uranyl ion). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Revision as of 12:52, 29 March 2006 by 129.215.37.163 (talk) (removed information on uranyl compounds. Put them in the entry on the uranyl ion)(diff) ← Previous revision | Latest revision (diff) | Newer revision → (diff)
Uranium trioxide
O
||
O = U = O

 
γ-UO3:

Systematic name Uranium trioxide
Other names Uranium(VI) oxide

Uranyl oxide

Uranic oxide

Molecular formula UO3 (or O3U, NIST)
Molar mass 286.03 g mol
CAS number
Density 5.5-8.7 g cm
Solubility (water) Insoluble
Solubility (dog lung fluid) < 5 days half time
Melting point ca. 500 °C decomp.(s)
Disclaimer and references

Uranium trioxide (UO3), also called uranyl oxide, uranium(VI) oxide, and uranic oxide, is the hexavalent oxide of uranium. The toxic, teratogenic, and radioactive solid may be obtained by heating uranyl nitrate to 400 °C, or burning uranium in air, producing a gas which condenses at standard temperature and pressure.

Its most commonly encountered polymorph, γ-UO3, is a yellow-orange powder.

Cameco Corporation, which operates at the world's largest uranium refinery at Blind River, Ontario, produces high-purity uranium trioxide.

Health and safety hazards

Like all hexavalent uranium compounds, UO3 is hazardous by inhalation, ingestion, and through skin contact. It is a poisonous, radioactive substance, which may cause shortness of breath, coughing, acute arterial lesions, and changes in the chromosomes of white blood cells and gonads leading to congenital malformations if inhaled.

UO3-Material Safety Data Sheet.

Chemistry

In addition to the monomeric gas which may be produced by uranium combustion, solid UO3 may be obtained by heating uranyl nitrate (UO2(NO3)2·6H2O) at 400 °C. This conversion is used in the reprocessing of nuclear fuel, which begins with the dissolution of the fuel rods in HNO3.

Uranium trioxide is also an intermediary compound in the conversion of sodium diuranate yellowcake (Na2U2O7·6H2O) to uranium hexafluoride and is shipped between processing facilities in the form of a UO3 gel. In the jargon of the uranium refining industry, the chemical solution containing the concentrated uranium trioxide is called "OK liquor". Upon heating, this material liberates ammonia, giving UO3.

Chemical and Structural properties

The only well characterized binary trioxide of any actinide is UO3, of which several polymorphs are known. At 800-900 °C, solid UO3 releases some O2 to give green-colored U3O8. Heating at 700 °C under H2 gives dark brown uranium dioxide (UO2), which is used in MOX nuclear fuel rods.

The most frequently encountered polymorph is γ-UO3, whose x-ray structure has been solved from powder diffraction data. The compound crystallizes in the space group I41/amd with two uranium atoms in the asymmetric unit. Both are surrounded by somewhat distorted octahedra of oxygen atoms. One uranium atom has two closer and four more distant oxygen atoms whereas the other has four close and two more distant oxygen atoms as neighbors. Thus it is not incorrect to describe the structure as , that is uranyl uranate. (Engmann 1963).

Infrared spectroscopy of molecular UO3 isolated in an argon matrix indicates a T-shaped structure (point group C2v) for the molecule. This is in contrast to the commonly encountered D3h symmetry exhibited by most trioxides. One could think of the compound as "uranyl monoxide", O. From the force constants the authors deduct the U-O bond lengths to be between 1.76 and 1.79 angstroms. The authors did not attempt to deduce bond angles. (Gabelnick, Reedy, Chasanov 1970)

In the gas phase

At elevated temperatures gaseous UO3 and O2 are in equilibrium with U3O8. THe vapor pressure of UO3 is low, about 10 bar at 980 °C, rising to 10 atm at 1400 °C, both in the presence of 1 bar of oxygen. In the gas phase uranyl oxide is monomeric. (Ackermann 1960)

Combustion product of uranium

Monomeric UO3 is produced by combustion of uranium metal in air from 2200-2800 Kelvin (Ackermann et al. 1960; Mouradian et al. 1963; Cotton, 1991.) UO3 gas will eventully condense under normal atmospheric conditions.

Uranium trioxide gas molecules are a known intermediate in the chemical transition reactions forming U3O8 crystals from combustion products including uranium oxides. According to Wilson (1961), Ackermann et al. (1960) show that U3O8 crystals result from the two step process:

/3 U3O8(s) + /6 O2(g) → UO3(g) at T1;
UO3(g) → /3 U3O8 + /6 O2(g) at T2;
where T2 < T1.

The uptake of oxygen by U3O8 is "not infrequently ignored" (Gmelin vol. U-C1, p. 98.)

Individual UO3 molecules will not decompose below the burning temperature of uranium in air, because uranium monoxide requires additional energy to form, as does the release of O2 by a single UO3 molecule. (Hoekstra and Siegel 1958; Wanner and Forest (2004) p. 98.)

Uranium oxide in ceramics

UO3-based ceramics become green or black when fired in a reducing atmosphere and yellow to orange when fired with oxygen. Orange-coloured Fiestaware is a well-known example of a product with a uranium-based glaze. UO3-has also been used in formulations of enamel, uranium glass, and porcelain.

Prior to 1960, UO3 was used as an agent of crystallization in crystalline coloured glazes. It is possible to determine with a Geiger counter if a glaze or glass was made from UO3.

Related anions and cations

Uranium oxide is amphoteric and reacts as acid and as a base, depending on the conditions.

As an acid:

UO3 + H2O → UO4 + H

Dissolving uranium oxide in a strong base like sodium hydroxide forms the doubly negatively charged uranate anion (UO4). Uranates tend to agglomerate, forming diuranate, U2O7

As a base:

UO3 + H2O → UO2 + OH

Dissolving uranium oxide in a strong acid like sulfuric or nitric acid forms the double positive charged uranyl cation. The uranyl nitrate formed (UO2(NO3)2ˑ6H2O) is soluble in ethers, alcohols, ketones and esters; for example, tributylphosphate. This solubilty is used to separate uranium from other elements in nuclear reprocessing, which begins with the dissolution of nuclear fuel rods in nitric acid. The uranyl nitrate is then converted to uranium trioxide by heating.

From nitric acid one obtains uranyl nitrate, trans-UO2(NO3)2·2H2O, consisting of eight-coordinated uranium with two bidentate nitrato ligands and two water ligands as well as the familiar O=U=O core.

See also

Accidental teratogens:

References

Peer-reviewed
United Nations invitation-only
  • H. R. Hoekstra and S. Siegel (1958) "Recent Developments in the Chemistry of the Uranium-Oxygen System," in the Proceedings of the Second International Conference on Peaceful Uses of Atomic Energy, (Geneva: UN) 7, 394-400.
Other
Categories: