This is an old revision of this page, as edited by Physchim62 (talk | contribs) at 13:37, 29 March 2006 (→Related anions and cations: rm boldface from wikilink as per MoS). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.
Revision as of 13:37, 29 March 2006 by Physchim62 (talk | contribs) (→Related anions and cations: rm boldface from wikilink as per MoS)(diff) ← Previous revision | Latest revision (diff) | Newer revision → (diff)Uranium trioxide | |
---|---|
O || O = U = O | |
Systematic name | Uranium trioxide Uranium(VI) oxide |
Other names | Uranyl oxide Uranic oxide |
Molecular formula | UO3 |
Molar mass | 286.03 g/mol |
CAS number | |
Density | 5.5-8.7 g/cm |
Solubility (water) | Soluble |
Elimination half-life | < 5 days (dog, inhalation) |
Melting point | ca. 500 °C decomp. |
Disclaimer and references |
Uranium trioxide (UO3), also called uranyl oxide, uranium(VI) oxide, and uranic oxide, is the hexavalent oxide of uranium. The toxic, teratogenic, and radioactive solid may be obtained by heating uranyl nitrate to 400 °C.
Its most commonly encountered polymorph, γ-UO3, is a yellow-orange powder.
Cameco Corporation, which operates at the world's largest uranium refinery at Blind River, Ontario, produces high-purity uranium trioxide.
Health and safety hazards
Like all hexavalent uranium compounds, UO3 is hazardous by inhalation, ingestion, and through skin contact. It is a poisonous, radioactive substance, which may cause shortness of breath, coughing, acute arterial lesions, and changes in the chromosomes of white blood cells and gonads leading to congenital malformations if inhaled.
Chemistry
Solid UO3 may be obtained by heating uranyl nitrate (UO2(NO3)2·6H2O) at 400 °C. This conversion is used in the reprocessing of nuclear fuel, which begins with the dissolution of the fuel rods in HNO3.
Uranium trioxide is also an intermediary compound in the conversion of sodium diuranate yellowcake (Na2U2O7·6H2O) to uranium hexafluoride and is shipped between processing facilities in the form of a UO3 gel. In the jargon of the uranium refining industry, the chemical solution containing the concentrated uranium trioxide is called "OK liquor". Upon heating, this material liberates ammonia, giving UO3.
Chemical and Structural properties
The only well characterized binary trioxide of any actinide is UO3, of which several polymorphs are known. At 800-900 °C, solid UO3 releases some O2 to give green-colored U3O8. Heating at 700 °C under H2 gives dark brown uranium dioxide (UO2), which is used in MOX nuclear fuel rods.
The most frequently encountered polymorph is γ-UO3, whose x-ray structure has been solved from powder diffraction data. The compound crystallizes in the space group I41/amd with two uranium atoms in the asymmetric unit. Both are surrounded by somewhat distorted octahedra of oxygen atoms. One uranium atom has two closer and four more distant oxygen atoms whereas the other has four close and two more distant oxygen atoms as neighbors. Thus it is not incorrect to describe the structure as , that is uranyl uranate. (Engmann, 1963).
Infrared spectroscopy of molecular UO3 isolated in an argon matrix indicates a T-shaped structure (point group C2v) for the molecule. This is in contrast to the commonly encountered D3h symmetry exhibited by most trioxides. One could think of the compound as "uranyl monoxide", O. From the force constants the authors deduct the U-O bond lengths to be between 1.76 and 1.79 angstroms. The authors did not attempt to deduce bond angles. (Gabelnick, Reedy, Chasanov, 1970)
In the gas phase
At elevated temperatures gaseous UO3 and O2 are in equilibrium with solid U3O8.
- /3 U3O8(s) + /6 O2(g) ⇄ UO3(g)
With increasing temperature the equilibrium is shifted to the right. This system has been studied at temperatures between 900 and 1500 °C. The vapor pressure of UO3 is low but appreciable, about 10 bar at 980 °C, rising to 10 bar at 1400 °C. In the gas phase, uranyl oxide is monomeric. (Ackermann, 1960)
Uranium oxide in ceramics
UO3-based ceramics become green or black when fired in a reducing atmosphere and yellow to orange when fired with oxygen. Orange-coloured Fiestaware is a well-known example of a product with a uranium-based glaze. UO3-has also been used in formulations of enamel, uranium glass, and porcelain.
Prior to 1960, UO3 was used as an agent of crystallization in crystalline coloured glazes. It is possible to determine with a Geiger counter if a glaze or glass was made from UO3.
Related anions and cations
Uranium oxide is amphoteric and reacts as acid and as a base, depending on the conditions.
As an acid:
- UO3 + H2O → UO4 + H
Dissolving uranium oxide in a strong base like sodium hydroxide forms the doubly negatively charged uranate anion (UO4). Uranates tend to agglomerate, forming diuranate, U2O7
As a base:
- UO3 + H2O → UO2 + OH
Dissolving uranium oxide in a strong acid like sulfuric or nitric acid forms the double positive charged uranyl cation. The uranyl nitrate formed (UO2(NO3)2ˑ6H2O) is soluble in ethers, alcohols, ketones and esters; for example, tributylphosphate. This solubilty is used to separate uranium from other elements in nuclear reprocessing, which begins with the dissolution of nuclear fuel rods in nitric acid. The uranyl nitrate is then converted to uranium trioxide by heating.
From nitric acid one obtains uranyl nitrate, trans-UO2(NO3)2·2H2O, consisting of eight-coordinated uranium with two bidentate nitrato ligands and two water ligands as well as the familiar O=U=O core.
See also
Accidental teratogens:
References
- Peer-reviewed
- R.J. Ackermann, et al., "Free Energies of Formation of Gaseous Uranium, Molybdenum, and Tungsten Trioxides," Journal of Physical Chemistry, vol. 64 (1960) pp. 350-355
- Wilson, W.B. (1961) "High-Pressure High-Temperature Investigation of the Uranium-Oxygen System," Journal Of Inorganic and Nuclear Chemistry, 19, 212-222.
- Roberts, L.E.J. and A.J. Walter (1961) "Equilibrium Pressures and Phase Relations in the Uranium Oxide System," Journal of Inorganic and Nuclear Chemistry, 22, 213-229.
- Mouradian and Baker (1963) "Burning Temperatures of Uranium and Zirconium in Air," Nuclear Science and Engineering, 15, 388-394
- R. Engmann, P.M. de Wolff (1963) "The Crystal Structure of γ-UO3," Acta Cryst., 16, 993.
- Chapman, A.T. and Meadows, R.E. (1964) "Volatility of UO2+/-x and Phase Relations in the System Uranium Oxygen," Journal of the American Ceramic Society, 47, 614-621.
- Drowart, J., A. Pattoret, and S. Smoes (1964) "Heat of sublimation of uranium and consistency of thermodynamic data for uranium compounds," Journal of Nuclear Materials, 12, 319-322.
- Hoekstra, H.R. and Siegel, S. (1970) "Uranium-Oxygen System at high pressure," Journal of Inorganic and Nuclear Chemistry, 32, 3237-3248.
- Morrow et al. (1972) "Inhalation studies of uranium trioxide" Health Physics 23, 273-280
- Ackermann, R.J. and A.T. Chang (1973) "Thermodynamic Characterization of U3O8-z Phase," Journal Of Chemical Thermodynamics, 5, 873-890.
- S.D. Gabelnick, G.T. Reedy, M.G. Chasanov (1973) "Infrared spectra of matrix-isolated uranium oxide species. II: Spectral interpretation and structure of UO3," J. Chem. Phys., 59, 6397.
- Rauh, E.G. and R.J. Ackermann (1974) "First ionization potentials of some refractory oxide vapors," J. Chem. Phys., 60, 1396.
- Stuart et al. (1979) "Solubility and Hemolytic Activity of Uranium Trioxide." Environmental Research 18, 385-396
- Green, D.W. (1980) "Relationship between spectroscopic data and thermodynamic functions; application to uranium, plutonium, and thorium oxide vapor species," Journal of Nuclear Materials, 88, 51-63.
- Cort, B., et al. (1987) "Infrared Characterization of Uranium Oxide Powders Using a Metal Light Pipe," Applied Spectroscopy, 41, 493-495.
- Chazel, V., et al. (1998) "Effect of U3O8 specific surface area on in vitro dissolution, biokinetics, and dose coefficients," Radiation Protection Dosimetry, 79, 39-42.
- Ansoborlo, E. (1998) "Exposure implications for uranium aerosols formed at a new laser enrichment facility: application of the ICRP respiratory tract and systemic model," Radiation Protection Dosimetry, 79, 23-27. Abstract: "... urine assay could be useful, provided that measurements are made soon after a known acute intake."
- Stradling, G.N., et al. (2000) "Treatment for actinide-bearing industrial dusts and aerosols," Radiation Protection Dosimetry, 87, 41-50.
- Chazel, V., et al. (2000) "Variation of solubility, biokinetics and dose coefficient of industrial uranium oxides according to specific surface area," Radiation Protection Dosimetry, 88, 223-231.
- Nakajima, K.; Arai, Y. (2001) "Mass-spectrometric investigation of UO{sub 3}(g)", Journal of Nuclear Materials, 294, 250-255.
- Ansoborlo, E. (2002) "Determination of the physical and chemical properties, biokinetics, and dose coefficients of uranium compounds handled during nuclear fuel fabrication in France," Health Physics, 82, 279-289.
- Stradling, N. et al. (2003a) "Optimising monitoring regimens for inhaled uranium oxides," Radiation Protection Dosimetry, 105, 109-114.
- Stradling, N. at al. (2003b) "Anomalies between radiological and chemical limits for uranium after inhalation by workers and the public," Radiation Protection Dosimetry 105, 175-178.
- Khaskelis, A.I. (2004) "Uranium oxide weathering: spectroscopy and kinetics," Transactions of the American Nuclear Society, 91, 890-891. Abstract: "During nuclear fuel fabrication or reprocessing stages of a nuclear fuel cycle, it is possible for small particles of uranium oxides to escape into the environment. This paper reports measurements of rates of oxidation of uranium dioxide particles in controlled gas environments using in-situ phosphorescence spectroscopy. Comparison is made with reduction and reoxidation of uranium trioxide...." From Schueneman, R.A. et al. (2003) Journal of Nuclear Materials, 323, 8-17.
- Sutton, M. and S.R. Burastero (2004) "Uranium(VI) solubility and speciation in simulated elemental human biological fluids," Chemical Research in Toxicology, 17, 1468-1480.
- United Nations invitation-only
- H. R. Hoekstra and S. Siegel (1958) "Recent Developments in the Chemistry of the Uranium-Oxygen System," in the Proceedings of the Second International Conference on Peaceful Uses of Atomic Energy, (Geneva: UN) 7, 394-400.
- Other
- H. Wanner and I. Forest, eds. (2004) Chemical Termodynamics of Uranium (Paris: OECD and French Nuclear Energy Agency)
- Gmelin Handbook of Inorganic Chemistry, 8th ed., English translation, vol. U-C1 (1977), page 98
- «Gmelin Handbuch der anorganischen Chemiek» 8th ed., vol. U-C2, pp. 118-120
- Gilchrist, R.L., J.A. Glissmyer, and J. Mishima (1979) "Characterization of Airborne Uranium from Test Firings of XM774 Ammunition," Technical report no. PNL-2944, Richland, WA: Battelle Pacific Northwest Laboratory, November 1979.
- URANIUM and CERAMICS by Edouard Bastarache
- Uranium and Insoluble Compounds from the Occupational Safety and Health Administration; note that UO3 is moderately soluble (Morrow, 1972.)
- Chemical data from NIST