This is an old revision of this page, as edited by BattyBot (talk | contribs) at 00:57, 30 January 2012 (changed {{Unreferenced}} to {{Refimprove}} & general fixes, removed stub tag using AWB (7916)). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.
Revision as of 00:57, 30 January 2012 by BattyBot (talk | contribs) (changed {{Unreferenced}} to {{Refimprove}} & general fixes, removed stub tag using AWB (7916))(diff) ← Previous revision | Latest revision (diff) | Newer revision → (diff) | This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed. Find sources: "Ammonium paratungstate" – news · newspapers · books · scholar · JSTOR (May 2008) (Learn how and when to remove this message) |
| |
| Identifiers | |
|---|---|
| CAS Number | |
| ChemSpider | |
| ECHA InfoCard | 100.031.228 
|
| CompTox Dashboard (EPA) | |
InChI
| |
| Properties | |
| Chemical formula | (NH4)10(H2W12O42)·4H2O |
| Molar mass | 3132.2 g/mol |
| Appearance | White crystalline powder |
| Boiling point | Decomposes at 600 °C |
Except where otherwise noted, data are given for materials in their standard state (at 25 °C , 100 kPa).
 Y verify (what is ?)
Infobox references
| |
Ammonium paratungstate is a white crystalline salt of ammonium and tungsten, with the chemical formula (NH4)10(W12O41)·5H2O.
Ammonium paratungstate is produced separating tungsten from its ore. Once the ammonium paratungstate is prepared, it is heated to its decomposition temperature, 600 °C. Left over is WO3, tungsten(VI) oxide. From there, the oxide is heated in an atmosphere of hydrogen, reducing the tungsten to elemental powder, leaving behind water vapor. From there, the tungsten powder can be fused into any number of things, from wire to bars to other shapes.
Structure
In more recent literature (post WWII period), the anion in (NH4)10(W12O41)·5H2O has been shown to be , containing two hydrogen atoms, keeping two hydrogen atoms inside the cage. The tungsten-oxygen cage, that is the heart of the anion requires 42 oxygen molecules. The correct formula notation for ammonium paratungstate is therefore (NH4)10·4H2O. The ion is known as the paratungstate B ion, as opposed to the paratungstate A ion, that has the formula , similar to the paramolybdate ion. The existence of the paratungstate A ion, could not be confirmed by NMR spectroscopy, however.
Before about 1930, there has been some dispute about the exact composition of the salt, and both (NH4)10W12O41 and (NH4)6W7O24 were proposed. O.W. Gibbs remarked about this:
- "The alkali tungstates are numerous and unusually complex. Salts of essentially different formul;ae approach so closely in percentage composition, that the differences lie very near the unavoidable errors of analyses. The analyses are hardly sufficiently close to decide the question upon purely analytical grounds."
Synthesis
When concentrating an ammoniacal solution of tungstic acid (i.e. hydrous WO3), the product obtained is ammonium paratungstate. Below 50 °C, the henahydrate is formed, whereas when the temperature of the solution is above 50 °C, the pentahydrate or heptahydrate is formed. The former crystallizes as triclinic plates or prisms, whereas the latter as pseudorhombic needles.
If a calcined WO3 is used, refluxing the ammonia solution is advisable to speed up the dissolution of the oxide.
References
- D.J. Jones, "Practical aspects of Sintering Tungsten and Molybdenum" (as referenced in Comprehensive Inorganic Chemistry, J.C. Bailar Jr. etc., p. 744, vol. 3, 1st edition 1973)
- Greenwood & Earnshaw, Chemistry of the Elements, 2nd ed. 1997, pp. 1012-1014
- J.W. Mellor: Inorganic and Theoretical Chemistry, vol. XI, p. 812-813, Longmans Green & co. 1931