This is an old revision of this page, as edited by Yobot (talk | contribs) at 18:30, 30 May 2013 (Tagging, removed underlinked tag using AWB (9218)). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.
Revision as of 18:30, 30 May 2013 by Yobot (talk | contribs) (Tagging, removed underlinked tag using AWB (9218))(diff) ← Previous revision | Latest revision (diff) | Newer revision → (diff)This article is an orphan, as no other articles link to it. Please introduce links to this page from related articles; try the Find link tool for suggestions. (November 2006) |
In MPLS, a label with the value of 1 represents the Router Alert Label. This label value is legal anywhere in the label stack except at the bottom. When a received packet contains this label value at the top of the label stack, it is delivered to a local software module for processing. The actual forwarding of the packet is determined by the label beneath it in the stack. However, if the packet is forwarded further, the Router Alert Label should be pushed back onto the label stack before forwarding. The use of this label is analogous to the use of the "Router Alert Option" in IP packets. Since this label cannot occur at the bottom of the stack, it is not associated with a particular network layer protocol.
External links
- http://www.cisco.com/warp/public/105/mpls_faq_4649.shtml
- MPLS Label Stack Encoding RFC
- IP Router Alert Option RFC