Misplaced Pages

Haber process

Article snapshot taken from Wikipedia with creative commons attribution-sharealike license. Give it a read and then ask your questions in the chat. We can research this topic together.

This is an old revision of this page, as edited by 212.135.1.185 (talk) at 13:03, 16 June 2006 (→Equilibrium and the Haber process). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Revision as of 13:03, 16 June 2006 by 212.135.1.185 (talk) (→Equilibrium and the Haber process)(diff) ← Previous revision | Latest revision (diff) | Newer revision → (diff)

The Haber Process (also Haber-Bosch process) is the reaction of nitrogen and hydrogen to produce ammonia.

The nitrogen(N) and hydrogen(H) are reacted over an iron catalyst(Fe) under conditions of 200 atmospheres (atm), 450-500°C; resulting in a yield of 10-20%:

N2(g) + 3H2(g) ⇌ 2NH3(g) + ΔH (1)

(Where ΔH is the heat of reaction or enthalpy. For the Haber process,this is -92.4 kJ/mol at 25°C)

The process was first patented by Fritz Haber in 1908. In 1910 Carl Bosch, while working for chemical company BASF, successfully commercialized the process and secured further patents. It was first used on an industrial scale by the Germans during World War I: Germany had previously imported 'Chilean saltpeter' from Chile, but the demand for munitions and the uncertainty of this supply in the war prompted the adoption of the process. The ammonia produced was oxidized for the production of nitric acid in the Ostwald process, and the nitric acid for the production of various explosive nitro compounds used in munitions.

The nitrogen is obtained from the air, and the hydrogen is obtained from water and natural gas in steam reforming:

CH4(g) + H2O(g) → CO(g) + 3H2(g) (2)

and shift conversion:

CO(g) + H2O(g) → CO2(g) + H2(g) (3)

PENIS==Equilibrium and the Haber process== The reaction of nitrogen and hydrogen (1) is reversible, meaning the reaction can proceed in either the forward or the reverse direction depending on conditions. The forward reaction is exothermic, meaning it produces heat and is favored at low temperatures, according to Le Chatelier's Principle. Increasing the temperature tends to drive the reaction in the reverse direction, which is undesirable if the goal is to produce ammonia. However, reducing the temperature reduces the rate of the reaction, which is also undesirable. Therefore, an intermediate temperature high enough to allow the reaction to proceed at a reasonable rate, yet not so high as to drive the reaction in the reverse direction, is required. Usually, 400°C is used.

High pressures favour the forward reaction because there are 4 moles of reactant for every 2 moles of product, meaning the position of the equilibrium will shift to the right to produce more ammonia. So the only compromise in pressure is the economical situation trying to increase the pressure as much as possible. Usually, 200 atm is used.

The catalyst has no effect on the position of equilibrium, however it does reduce the activation energy of system and hence in turn increase the reaction rate. This allows the process to be operated at lower temperatures, which as mentioned before favors the forward reaction. The first Haber-Bosch reaction chambers used osmium and uranium catalysts. However, today a much less expensive iron catalyst is used almost exclusively.

The equilibrium constant for this process is given by:

Keq = /

As the temperature increases, the concentration of ammonia decreases and hence, in turn, the equilibrium constant decreases. Temperature (°C) : Keq

25  : 6.4 x 10

200 : 4.4 x 10

300 : 4.3 x 10

400 : 1.6 x 10

500 : 1.5 x 10


In industrial practice, the iron catalyst is prepared by exposing a mass of magnetite, an iron oxide, to the hot hydrogen feedstock. This reduces some of the magnetite to metallic iron, removing oxygen in the process. However, the catalyst maintains most of its bulk volume during the reduction, and so the result is a highly porous material whose large surface area aids its effectiveness as a catalyst. Other minor components of the catalyst include calcium and aluminium oxides, which support the porous iron catalyst and help it maintain its surface area over time, and potassium, which increases the electron density of the catalyst and so improves its reactivity.

The ammonia is formed as a gas but on cooling in the condensor liquefies at the high pressures used, and so is removed as a liquid. Unreacted nitrogen and hydrogen are then fed back in to the reaction.

The Haber process now produces 500 million tons of artificial fertilizer per year, mostly in the form of anhydrous ammonia, ammonium nitrate, and urea. 1% of the world's energy supply is consumed in the manufacturing of that fertilizer (Science 297(1654), Sep 2002). That fertilizer is responsible for sustaining 40% of the Earth's population.

References

  • Enriching the Earth: Fritz Haber, Carl Bosch, and the Transformation of World Food Production by Vaclav Smil (2001) ISBN 0-262-19449-X
  • Fertilizer Industry: Processes, Pollution Control and Energy Conservation by Marshall Sittig (1979) Noyes Data Corp., N.J. ISBN 0-8155-0734-8

External links

Categories: