This is an old revision of this page, as edited by Rachel123s (talk | contribs) at 15:04, 15 June 2015 (added reference). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.
Revision as of 15:04, 15 June 2015 by Rachel123s (talk | contribs) (added reference)(diff) ← Previous revision | Latest revision (diff) | Newer revision → (diff) | This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed. Find sources: "Potting" electronics – news · newspapers · books · scholar · JSTOR (August 2012) (Learn how and when to remove this message) |
In electronics, potting is a process of filling a complete electronic assembly with a solid or gelatinous compound for resistance to shock and vibration, and for exclusion of moisture and corrosive agents. Thermo-setting plastics or silicone rubber gels are often used. Many sites recommend using silicone or epoxy to protect from impact and loose wires.
Most circuit board assembly houses coat assemblies with a layer of transparent conformal coating rather than potting. Conformal coating gives most of the benefits of potting, and is lighter and easier to inspect, test, and repair.
When potting a circuit board that uses surface-mount technology, low glass transition temperature (Tg) potting compounds such as polyurethane or silicone are used, because high Tg potting compounds may break solder bonds as they harden and shrink at low temperatures.
See also
References
- Hackaday
- http://ww1.microchip.com/downloads/en/AppNotes/01288A.pdf
- http://www.pottingsolutions.com/my%20site/Technology/potting_hints.htm#Potting%20PC%20boards
External links
 | This electronics-related article is a stub. You can help Misplaced Pages by expanding it. |