Misplaced Pages

This is an old revision of this page, as edited by AnomieBOT (talk | contribs) at 03:04, 21 June 2015 (Dating maintenance tags: {{Biblio}}). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

This article has multiple issues. Please help improve it or discuss these issues on the talk page. (Learn how and when to remove these messages) This article's tone or style may not reflect the encyclopedic tone used on Misplaced Pages. See Misplaced Pages's guide to writing better articles for suggestions. (October 2012) (Learn how and when to remove this message) This article may require cleanup to meet Misplaced Pages's quality standards. No cleanup reason has been specified. Please help improve this article if you can. (October 2008) (Learn how and when to remove this message) This article has an unclear citation style. The references used may be made clearer with a different or consistent style of citation and footnoting. (September 2009) (Learn how and when to remove this message) (Learn how and when to remove this message)

Special relativity
Principle of relativity Theory of relativity Formulations
Foundations Einstein's postulates Inertial frame of reference Speed of light Maxwell's equations Lorentz transformation
Consequences Time dilation Length contraction Relativistic mass Mass–energy equivalence Relativity of simultaneity Relativistic Doppler effect Thomas precession Relativistic disk Bell's spaceship paradox Ehrenfest paradox
Spacetime Minkowski spacetime Spacetime diagram World line Light cone
Dynamics Proper time Proper mass Four-momentum
History Precursors Galilean relativity Galilean transformation Aether theories
People Einstein Sommerfeld Michelson Morley FitzGerald Herglotz Lorentz Poincaré Minkowski Fizeau Abraham Born Planck von Laue Ehrenfest Tolman Dirac
Physics portal  Category
v t e

In physics, special relativity is a fundamental theory concerning space and time, developed by Albert Einstein in 1905 as a modification of Galilean relativity. (See "History of special relativity" for a detailed account and the contributions of Hendrik Lorentz and Henri Poincaré.) The theory was able to explain some pressing theoretical and experimental issues in the physics of the time involving light and electrodynamics, such as the failure of the 1887 Michelson–Morley experiment, which aimed to measure differences in the relative speed of light due to the Earth's motion through the hypothetical, and now discredited, luminiferous aether. The aether was then considered to be the medium of propagation of electromagnetic waves such as light.

Einstein postulated that the speed of light in free space is the same for all observers, regardless of their motion relative to the light source, where we may think of an observer as an imaginary entity with a sophisticated set of measurement devices, at rest with respect to itself, that perfectly records the positions and times of all events in space and time. This postulate stemmed from the assumption that Maxwell's equations of electromagnetism, which predict a specific speed of light in a vacuum, hold in any inertial frame of reference rather than, as was previously believed, just in the frame of the aether. This prediction contradicted the laws of classical mechanics, which had been accepted for centuries, by arguing that time and space are not fixed and in fact change to maintain a constant speed of light regardless of the relative motions of sources and observers. Einstein's approach was based on thought experiments, calculations, and the principle of relativity, which is the notion that all physical laws should appear the same (that is, take the same basic form) to all inertial observers. Today, the result is that the speed of light defines the metre as "the length of the path travelled by light in vacuum during a time interval of 1/299 792 458 of a second." This relates that the speed of light is by convention 299 792 458 m/s (approximately 1.079 billion kilometres per hour, or 671 million miles per hour).

The predictions of special relativity are almost identical to those of Galilean relativity for most everyday phenomena, in which speeds are much lower than the speed of light, but it makes different, non-obvious predictions for objects moving at very high speeds. These predictions have been experimentally tested on numerous occasions since the theory's inception and were confirmed by those experiments. The major predictions of special relativity are:

• Relativity of simultaneity: Observers who are in motion with respect to each other may disagree on whether two events occurred at the same time or one occurred before the other.
• Time dilation (An observer watching two identical clocks, one moving and one at rest, will measure the moving clock to tick more slowly)
• Relativistic mass
• Length contraction (Along the direction of motion, a rod moving with respect to an observer will be measured to be shorter than an identical rod at rest), and
• The equivalence of mass and energy (written as E = mc).

Special relativity predicts a non-linear velocity addition formula which prevents speeds greater than that of light from being observed. In 1908, Hermann Minkowski reformulated the theory based on different postulates of a more geometrical nature. This approach considers space and time as being different components of a single entity, the spacetime, which is "divided" in different ways by observers in relative motion. Likewise, energy and momentum are the components of the four-momentum, and the electric and magnetic field are the components of the electromagnetic tensor.

As Galilean relativity is now considered an approximation of special relativity valid for low speeds, special relativity is considered an approximation of the theory of general relativity valid for weak gravitational fields. General relativity postulates that physical laws should appear the same to all observers (an accelerating frame of reference being equivalent to one in which a gravitational field acts), and that gravitation is the effect of the curvature of spacetime caused by energy (including mass).

Reference frames and Galilean relativity: a classical prelude

A reference frame is simply a selection of what constitutes a stationary object. Once the velocity of a certain object is arbitrarily defined to be zero, the velocity of everything else in the universe can be measured relative to that object.

One oft-used example is the difference in measurements of objects on a train as made by an observer on the train compared to those made by one standing on a nearby platform as it passes.

Consider the seats on the train car in which the passenger observer is sitting.

The distances between these objects and the passenger observer do not change. Therefore, this observer measures all of the seats to be at rest, since he is stationary from his own perspective.

An observer standing on the platform would see exactly the same objects but interpret them very differently. The distance between the platform observer and the seats on the train car is changing, and so the platform observer concludes that the seats are moving forward, as is the whole train. Thus for one observer the seats are at rest, while for the other the seats are moving, and both are correct, since they are using different definitions of "at rest" and "moving". Each observer has a distinct "frame of reference" in which velocities are measured, the rest frame of the platform and the rest frame of the train – or simply the platform frame and the train frame.

Why can't we select one of these frames to be the "correct" one? Or more generally, why is there not a frame we can select to be the basis for all measurements, an "absolutely stationary" frame?

Aristotle imagined the Earth lying at the centre of the universe (the geocentric model), unmoving as other objects moved about it. In this worldview, one could select the surface of the Earth as the absolute frame. However, as the geocentric model was challenged and finally fell in the 1500s, it was realised that the Earth was not stationary at all, but both rotating on its axes as well as orbiting the Sun. In this case the Earth is clearly not the absolute frame. But perhaps there is some other frame one could select, perhaps the Sun's?

Galileo challenged this idea and argued that the concept of an absolute frame, and thus absolute velocity, was unreal; all motion was relative. Galileo gave the common-sense "formula" for adding velocities: if

1. particle P is moving at velocity v with respect to reference frame A and
2. reference frame A is moving at velocity u with respect to reference frame B, then
3. the velocity of P with respect to B is given by v + u.

In modern terms, we expand the application of this concept from velocity to all physical measurements – according to what we now call the Galilean transformation, there is no absolute frame of reference. An observer on the train has no measurement that distinguishes whether the train is moving forward at a constant speed, or the platform is moving backwards at that same speed. The only meaningful statement is that the train and platform are moving relative to each other, and any observer can choose to define what constitutes a speed equal to zero. When considering trains moving by platforms it is generally convenient to select the frame of reference of the platform, but such a selection would not be convenient when considering planetary motion and is not intrinsically more valid.

One can use this formula to explore whether or not any possible measurement would remain the same in different reference frames. For instance, if the passenger on the train threw a ball forward, he would measure one velocity for the ball, and the observer on the platform another. After applying the formula above, though, both would agree that the velocity of the ball is the same once corrected for a different choice of what speed is considered zero. This means that motion is "invariant". Laws of classical mechanics, like Newton's second law of motion, all obey this principle because they have the same form after applying the transformation. As Newton's law involves the derivative of velocity, any constant velocity added in a Galilean transformation to a different reference frame contributes nothing (the derivative of a constant is zero).

This means that the Galilean transformation and the addition of velocities only apply to frames that are moving at a constant (relative) velocity. Since objects tend to retain their current velocity due to a property we call inertia, frames that refer to objects with constant speed are known as inertial reference frames. The Galilean transformation, then, does not apply to accelerations, only velocities, and classical mechanics is not invariant under acceleration. This mirrors the real world, where acceleration is easily distinguishable from smooth motion in any number of ways. For example, if an observer on a train saw a ball roll backward off a table, he would be able to infer that the train was accelerating forward, since the ball remains at rest unless acted upon by an external force. Therefore, the only explanation is that the train has moved underneath the ball, resulting in an apparent motion of the ball. Addition of a time-varying velocity, corresponding to an accelerated reference frame, changed the formula (see pseudo-force).

Both the Aristotelian and Galilean views of motion contain an important assumption. Motion is defined as the change of position over time, but both of these quantities, position and time, are not defined within the system. It is assumed, explicitly in the Greek worldview, that space and time lie outside physical existence and are absolute even if the objects within them are measured relative to each other. The Galilean transformations can only be applied because both observers are assumed to be able to measure the same time and space, regardless of their frames' relative motions. So in spite of there being no absolute motion, it is assumed there is some, perhaps unknowable, absolute space and time.

Classical physics and electromagnetism

Through the era between Newton and around the start of the 20th century, the development of classical physics had made great strides. Newton's application of the inverse square law to gravity was the key to unlocking a wide variety of physical events, from heat to light, and calculus made the direct calculation of these effects tractable. Over time, new mathematical techniques, notably the Lagrangian, greatly simplified the application of these physical laws to more complex problems.

As electricity and magnetism were better explored, it became clear that the two concepts were related. Over time, this work culminated in Maxwell's equations, a set of four equations that could be used to calculate the entirety of electromagnetism. One of the most interesting results of the application of these equations was that it was possible to construct a self-sustaining wave of electrical and magnetic fields that could propagate through space. When reduced, the mathematics demonstrated that the speed of propagation was dependent on two universal constants, and their ratio was the speed of light. Light was an electromagnetic wave.

Under the classic model, waves are displacements within a medium. In the case of light, the waves were thought to be displacements of a special medium known as the luminiferous aether, which extended through all space. This being the case, light travels in its own frame of reference, the frame of the aether. According to the Galilean transform, we should be able to measure the difference in velocities between the aether's frame and any other – a universal frame at last.

Designing an experiment to actually carry out this measurement proved very difficult, however, as the speeds and timing involved made accurate measurement difficult. The measurement problem was eventually solved with the Michelson–Morley experiment. To everyone's surprise, no relative motion was seen. Either the aether was travelling at the same velocity as the Earth, difficult to imagine given the Earth's complex motion, or there was no aether. Follow-up experiments tested various possibilities, and by the start of the 20th century it was becoming increasingly difficult to escape the conclusion that the aether did not exist.

These experiments all showed that light simply did not follow the Galilean transformation. And yet it was clear that physical objects emitted light, which led to unsolved problems. If one were to carry out the experiment on the train by "throwing light" instead of balls, if light does not follow the Galilean transformation then the observers should not agree on the results. Yet it was apparent that the universe disagreed; physical systems known to be at great speeds, like distant stars, had physics that were as similar to our own as measurements allowed. Some sort of transformation had to be acting on light, or better, a single transformation for both light and matter.

The development of a suitable transformation to replace the Galilean transformation is the basis of special relativity.

Invariance of length: the Euclidean picture

In special relativity, space and time are joined into a unified four-dimensional continuum called spacetime. To gain a sense of what spacetime is like, we must first look at the Euclidean space of classical Newtonian physics. This approach to explaining the theory of special relativity begins with the concept of "length".

In everyday experience, it seems that the length of objects remains the same no matter how they are rotated or moved from place to place; as a result the simple length of an object doesn't appear to change or is invariant. However, as is shown in the illustrations below, what is actually being suggested is that length seems to be invariant in a three-dimensional coordinate system.

The length of a line in a two-dimensional Cartesian coordinate system is given by Pythagoras' theorem:

${\displaystyle h^{2}=x^{2}+y^{2}.\,}$

One of the basic theorems of vector algebra is that the length of a vector does not change when it is rotated. However, a closer inspection tells us that this is only true if we consider rotations confined to the plane. If we introduce rotation in the third dimension, then we can tilt the line out of the plane. In this case the projection of the line on the plane will get shorter. Does this mean the line's length changes? – obviously not. The world is three-dimensional and in a 3D Cartesian coordinate system the length is given by the three-dimensional version of Pythagoras's theorem:

${\displaystyle k^{2}=x^{2}+y^{2}+z^{2}.\,}$

This is invariant under all rotations. The apparent violation of invariance of length only happened because we were "missing" a dimension. It seems that, provided all the directions in which an object can be tilted or arranged are represented within a coordinate system, the length of an object does not change under rotations. With time and space considered to be outside the realm of physics itself, under classical mechanics a 3-dimensional coordinate system is enough to describe the world.

Note that invariance of length is not ordinarily considered a principle or law, not even a theorem. It is simply a statement about the fundamental nature of space itself. Space as we ordinarily conceive it is called a three-dimensional Euclidean space, because its geometrical structure is described by the principles of Euclidean geometry. The formula for distance between two points is a fundamental property of a Euclidean space, it is called the Euclidean metric tensor (or simply the Euclidean metric). In general, distance formulas are called metric tensors.

Note that rotations are fundamentally related to the concept of length. In fact, one may define length or distance to be that which stays the same (is invariant) under rotations, or define rotations to be that which keep the length invariant. Given any one, it is possible to find the other. If we know the distance formula, we can find out the formula for transforming coordinates in a rotation. If, on the other hand, we have the formula for rotations then we can find out the distance formula.

The Minkowski formulation: introduction of spacetime

After Einstein derived special relativity formally from the (at first sight counter-intuitive) assumption that the speed of light is the same to all observers, Hermann Minkowski built on mathematical approaches used in non-euclidean geometry and on the mathematical work of Lorentz and Poincaré. Minkowski showed in 1908 that Einstein's new theory could also be explained by replacing the concept of a separate space and time with a four-dimensional continuum called spacetime. This was a groundbreaking concept, and Roger Penrose has said that relativity was not truly complete until Minkowski reformulated Einstein's work.

The concept of a four-dimensional space is hard to visualise. It may help at the beginning to think simply in terms of coordinates. In three-dimensional space, one needs three real numbers to refer to a point. In the Minkowski space, one needs four real numbers (three space coordinates and one time coordinate) to refer to a point at a particular instant of time. This point, specified by the four coordinates, is called an event. The distance between two different events is called the spacetime interval.

A path through the four-dimensional spacetime (usually known as Minkowski space) is called a world line. Since it specifies both position and time, a particle having a known world line has a completely determined trajectory and velocity. This is just like graphing the displacement of a particle moving in a straight line against the time elapsed. The curve contains the complete motional information of the particle.

In the same way as the measurement of distance in 3D space needed all three coordinates, we must include time as well as the three space coordinates when calculating the distance in Minkowski space (henceforth called M). In a sense, the spacetime interval provides a combined estimate of how far apart two events occur in space as well as the time that elapses between their occurrence.

But there is a problem; time is related to the space coordinates, but they are not equivalent. Pythagoras' theorem treats all coordinates on an equal footing (see Euclidean space for more details). We can exchange two space coordinates without changing the length, but we can not simply exchange a space coordinate with time – they are fundamentally different. It is an entirely different thing for two events to be separated in space and to be separated in time. Minkowski proposed that the formula for distance needed a change. He found that the correct formula was actually quite simple, differing only by a sign from Pythagoras' theorem:

${\displaystyle s^{2}=x^{2}+y^{2}+z^{2}-(ct)^{2}\,}$

where c is a constant and t is the time coordinate. Multiplication by c, which has the dimensions L T , converts the time to units of length and this constant has the same value as the speed of light. So the spacetime interval between two distinct events is given by

${\displaystyle s^{2}=(x_{2}-x_{1})^{2}+(y_{2}-y_{1})^{2}+(z_{2}-z_{1})^{2}-c^{2}(t_{2}-t_{1})^{2}.\,}$

There are two major points to be noted. Firstly, time is being measured in the same units as length by multiplying it by a constant conversion factor. Secondly, and more importantly, the time-coordinate has a different sign than the space coordinates. This means that in the four-dimensional spacetime, one coordinate is different from the others and influences the distance differently. This new "distance" may be zero or even negative. This new distance formula, called the metric of the spacetime, is at the heart of relativity. This distance formula is called the metric tensor of M. This minus sign means that a lot of our intuition about distances can not be directly carried over into spacetime intervals. For example, the spacetime interval between two events separated both in time and space may be zero (see below). From now on, the terms distance formula and metric tensor will be used interchangeably, as will be the terms Minkowski metric and spacetime interval.

In Minkowski spacetime the spacetime interval is the invariant length, the ordinary 3D length is not required to be invariant. The spacetime interval must stay the same under rotations, but ordinary lengths can change. Just like before, we were missing a dimension. Note that everything thus far is merely definitions. We define a four-dimensional mathematical construct which has a special formula for distance, where distance means that which stays the same under rotations (alternatively, one may define a rotation to be that which keeps the distance unchanged).

Now comes the physical part. Rotations in Minkowski space have a different interpretation than ordinary rotations. These rotations correspond to transformations of reference frames. Passing from one reference frame to another corresponds to rotating the Minkowski space. An intuitive justification for this is given below, but mathematically this is a dynamical postulate just like assuming that physical laws must stay the same under Galilean transformations (which seems so intuitive that we don't usually recognise it to be a postulate).

Since by definition rotations must keep the distance same, passing to a different reference frame must keep the spacetime interval between two events unchanged. This requirement can be used to derive an explicit mathematical form for the transformation that must be applied to the laws of physics (compare with the application of Galilean transformations to classical laws) when shifting reference frames. These transformations are called the Lorentz transformations. Just like the Galilean transformations are the mathematical statement of the principle of Galilean relativity in classical mechanics, the Lorentz transformations are the mathematical form of Einstein's principle of relativity. Laws of physics must stay the same under Lorentz transformations. Maxwell's equations and Dirac's equation satisfy this property, and hence they are relativistically correct laws (but classically incorrect, since they don't transform correctly under Galilean transformations).

With the statement of the Minkowski metric, the common name for the distance formula given above, the theoretical foundation of special relativity is complete. The entire basis for special relativity can be summed up by the geometric statement "changes of reference frame correspond to rotations in the 4D Minkowski spacetime, which is defined to have the distance formula given above". The unique dynamical predictions of SR stem from this geometrical property of spacetime. Special relativity may be said to be the physics of Minkowski spacetime. In this case of spacetime, there are six independent rotations to be considered. Three of them are the standard rotations on a plane in two directions of space. The other three are rotations in a plane of both space and time: These rotations correspond to a change of velocity, and the Minkowski diagrams devised by him describe such rotations.

As has been mentioned before, one can replace distance formulas with rotation formulas. Instead of starting with the invariance of the Minkowski metric as the fundamental property of spacetime, one may state (as was done in classical physics with Galilean relativity) the mathematical form of the Lorentz transformations and require that physical laws be invariant under these transformations. This makes no reference to the geometry of spacetime, but will produce the same result. This was in fact the traditional approach to SR, used originally by Einstein himself. However, this approach is often considered to offer less insight and be more cumbersome than the more natural Minkowski formalism.

Reference frames and Lorentz transformations: relativity revisited

This section does not cite any sources. Please help improve this section by adding citations to reliable sources. Unsourced material may be challenged and removed. (March 2013) (Learn how and when to remove this message)

Changes in reference frame, represented by velocity transformations in classical mechanics, are represented by rotations in Minkowski space. These rotations are called Lorentz transformations. They are different from the Galilean transformations because of the unique form of the Minkowski metric. The Lorentz transformations are the relativistic equivalent of Galilean transformations. Laws of physics, in order to be relativistically correct, must stay the same under Lorentz transformations. The physical statement that they must be the same in all inertial reference frames remains unchanged, but the mathematical transformation between different reference frames changes. Newton's laws of motion are invariant under Galilean rather than Lorentz transformations, so they are immediately recognisable as non-relativistic laws and must be discarded in relativistic physics. The Schrödinger equation is also non-relativistic.

Maxwell's equations are written using vectors and at first glance appear to transform correctly under Galilean transformations. But on closer inspection, several questions are apparent that can not be satisfactorily resolved within classical mechanics (see History of special relativity). They are indeed invariant under Lorentz transformations and are relativistic, even though they were formulated before the discovery of special relativity. Classical electrodynamics can be said to be the first relativistic theory in physics. To make the relativistic character of equations apparent, they are written using four-component vector-like quantities called four-vectors. Four-vectors transform correctly under Lorentz transformations, so equations written using four-vectors are inherently relativistic. This is called the manifestly covariant form of equations. Four-vectors form a very important part of the formalism of special relativity.

Einstein's postulate: the constancy of the speed of light

Einstein's postulate that the speed of light is a constant comes out as a natural consequence of the Minkowski formulation.

Proposition 1:

When an object is travelling at c in a certain reference frame, the spacetime interval is zero.

Proof:

The spacetime interval between the origin-event (0,0,0,0) and an event (x,y,z,t) is

${\displaystyle s^{2}=x^{2}+y^{2}+z^{2}-(ct)^{2}.\,}$

The distance travelled by an object moving at velocity v for t seconds is:

${\displaystyle {\sqrt {x^{2}+y^{2}+z^{2}}}=vt\,}$

giving

${\displaystyle s^{2}=(vt)^{2}-(ct)^{2}.\,}$

Since the velocity v equals c we have

${\displaystyle s^{2}=(ct)^{2}-(ct)^{2}.\,}$

Hence the spacetime interval between the events of departure and arrival is given by

${\displaystyle s^{2}=0\,}$

Proposition 2:

An object travelling at c in one reference frame is travelling at c in all reference frames.

Proof:

Let the object move with velocity v when observed from a different reference frame. A change in reference frame corresponds to a rotation in M. Since the spacetime interval must be conserved under rotation, the spacetime interval must be the same in all reference frames. In proposition 1 we showed it to be zero in one reference frame, hence it must be zero in all other reference frames. We get that

${\displaystyle (vt)^{2}-(ct)^{2}=0\,}$

which implies

${\displaystyle |v|=c.}$

The paths of light rays have a zero spacetime interval, and hence all observers will obtain the same value for the speed of light. Therefore, when assuming that the universe has four dimensions that are related by Minkowski's formula, the speed of light appears as a constant, and does not need to be assumed (postulated) to be constant as in Einstein's original approach to special relativity.

Clock delays and rod contractions: more on Lorentz transformations

Another consequence of the invariance of the spacetime interval is that clocks will appear to go slower on objects that are moving relative to the observer. This is very similar to how the 2D projection of a line rotated into the third dimension appears to get shorter. Length is not conserved simply because we are ignoring one of the dimensions. Let us return to the example of John and Bill.

John observes the length of Bill's spacetime interval as:

${\displaystyle s^{2}=(vt)^{2}-(ct)^{2}\,}$

whereas Bill doesn't think he has traveled in space, so writes:

${\displaystyle s^{2}=(0)^{2}-(cT)^{2}\,}$

The spacetime interval, s, is invariant. It has the same value for all observers, no matter who measures it or how they are moving in a straight line. This means that Bill's spacetime interval equals John's observation of Bill's spacetime interval so:

${\displaystyle (0)^{2}-(cT)^{2}=(vt)^{2}-(ct)^{2}\,}$

and

${\displaystyle -(cT)^{2}=(vt)^{2}-(ct)^{2}\,}$

hence

${\displaystyle t={\frac {T}{\sqrt {1-{\frac {v^{2}}{c^{2}}}}}}\,}$.

So, if John sees a clock that is at rest in Bill's frame record one second, John will find that his own clock measures between these same ticks an interval t, called coordinate time, which is greater than one second. It is said that clocks in motion slow down, relative to those on observers at rest. This is known as "relativistic time dilation of a moving clock". The time that is measured in the rest frame of the clock (in Bill's frame) is called the proper time of the clock.

In special relativity, therefore, changes in reference frame affect time also. Time is no longer absolute. There is no universally correct clock; time runs at different rates for different observers.

Similarly it can be shown that John will also observe measuring rods at rest on Bill's planet to be shorter in the direction of motion than his own measuring rods. This is a prediction known as "relativistic length contraction of a moving rod". If the length of a rod at rest on Bill's planet is X, then we call this quantity the proper length of the rod. The length x of that same rod as measured on John's planet, is called coordinate length, and given by

${\displaystyle x=X{\sqrt {1-{\frac {v^{2}}{c^{2}}}}}\,}$.

These two equations can be combined to obtain the general form of the Lorentz transformation in one spatial dimension:

${\displaystyle {\begin{cases}T&=\gamma \left(t-{\frac {vx}{c^{2}}}\right)\\X&=\gamma \left(x-vt\right)\end{cases}}}$

or equivalently:

${\displaystyle {\begin{cases}t&=\gamma \left(T+{\frac {vX}{c^{2}}}\right)\\x&=\gamma \left(X+vT\right)\end{cases}}}$

where the Lorentz factor is given by

${\displaystyle \gamma ={1 \over {\sqrt {1-v^{2}/c^{2}}}}}$

The above formulas for clock delays and length contractions are special cases of the general transformation.

Alternatively, these equations for time dilation and length contraction (here obtained from the invariance of the spacetime interval), can be obtained directly from the Lorentz transformation by setting X = 0 for time dilation, meaning that the clock is at rest in Bill's frame, or by setting t = 0 for length contraction, meaning that John must measure the distances to the end points of the moving rod at the same time.

A consequence of the Lorentz transformations is the modified velocity-addition formula:

${\displaystyle s={v+u \over 1+(v/c)(u/c)}.}$

Simultaneity and clock desynchronisation

This section needs expansion. You can help by adding to it. (October 2007)

The last consequence of Minkowski's spacetime is that clocks will appear to be out of phase with each other along the length of a moving object. This means that if one observer sets up a line of clocks that are all synchronised so they all read the same time, then another observer who is moving along the line at high speed will see the clocks all reading different times. This means that observers who are moving relative to each other see different events as simultaneous. This effect is known as "Relativistic Phase" or the "Relativity of Simultaneity". Relativistic phase is often overlooked by students of special relativity, but if it is understood, then phenomena such as the twin paradox are easier to understand.

Observers have a set of simultaneous events around them that they regard as composing the present instant. The relativity of simultaneity results in observers who are moving relative to each other having different sets of events in their present instant.

The net effect of the four-dimensional universe is that observers who are in motion relative to you seem to have time coordinates that lean over in the direction of motion, and consider things to be simultaneous that are not simultaneous for you. Spatial lengths in the direction of travel are shortened, because they tip upwards and downwards, relative to the time axis in the direction of travel, akin to a skew or shear of three-dimensional space.

Great care is needed when interpreting spacetime diagrams. Diagrams present data in two dimensions, and cannot show faithfully how, for instance, a zero length spacetime interval appears.

General relativity: a peek forward

Unlike Newton's laws of motion, relativity is not based upon dynamical postulates. It does not assume anything about motion or forces. Rather, it deals with the fundamental nature of spacetime. It is concerned with describing the geometry of the backdrop on which all dynamical phenomena take place. In a sense therefore, it is a meta-theory, a theory that lays out a structure that all other theories must follow. In truth, special relativity is only a special case. It assumes that spacetime is flat. That is, it assumes that the structure of Minkowski space and the Minkowski metric tensor is constant throughout. In general relativity, Einstein showed that this is not true. The structure of spacetime is modified by the presence of matter. Specifically, the distance formula given above is no longer generally valid except in space free from mass. However, just like a curved surface can be considered flat in the infinitesimal limit of calculus, a curved spacetime can be considered flat at a small scale. This means that the Minkowski metric written in the differential form is generally valid.

${\displaystyle ds^{2}=dx^{2}+dy^{2}+dz^{2}-c^{2}dt^{2}\,}$

One says that the Minkowski metric is valid locally, but it fails to give a measure of distance over extended distances. It is not valid globally. In fact, in general relativity the global metric itself becomes dependent on the mass distribution and varies through space. The central problem of general relativity is to solve the famous Einstein field equations for a given mass distribution and find the distance formula that applies in that particular case. Minkowski's spacetime formulation was the conceptual stepping stone to general relativity. His fundamentally new outlook allowed not only the development of general relativity, but also to some extent quantum field theories.

Mass–energy equivalence

As we increase an object's energy by accelerating it, such that its speed approaches the speed of light from an observer's point of view, its total (relativistic) mass increases, thereby making it more and more difficult to accelerate it from within the observer's frame of reference. This ultimately leads to the concept of mass-energy equivalence.

Any object that has mass when at rest (in a given inertial frame of reference), equivalently has rest energy as can be calculated using Einstein's equation E=mc. Rest energy, being a form of energy, is interconvertible with other forms of energy. As with any energy transformation, the total amount of energy does not increase or decrease in such a process. From this perspective, the amount of matter in the universe contributes to its total energy.

Similarly, the total of amount of energy of any system also manifests as an equivalent total amount of mass, not limited to the case of the relativistic mass of a moving body. For example, adding 25 kilowatt-hours (90 megajoules) of any form(s) of energy to an object increases its mass by 1 microgram. If you had a sensitive enough mass balance or scale, this mass increase could be measured. Our Sun (or a nuclear bomb) converts nuclear potential energy to other forms of energy; its total mass doesn't decrease due to that in itself because it still contains the same total energy in different forms, but its mass does decrease when the energy escapes out to its surroundings, largely as radiant energy.

Applications

This section needs expansion. You can help by adding to it. (September 2007)

There is a common perception that relativistic physics is not needed for practical purposes or in everyday life. This is not true. Without relativistic effects, gold would look silvery, rather than yellow. Many technologies are critically dependent on relativistic physics:

• Cathode ray tubes,
• Particle accelerators,
• Global Positioning System (GPS) – These systems require very precise measures of time, so that the effects of relativity must be considered in calculations. These calculations actually require the more complete general relativity.

The postulates of special relativity

Einstein developed special relativity on the basis of two postulates:

• First postulate – Special principle of relativity – The laws of physics are the same in all inertial frames of reference. In other words, there are no privileged inertial frames of reference.
• Second postulate – Invariance of c – The speed of light in a vacuum is independent of the motion of the light source.

Special relativity can be derived from these postulates, as was done by Einstein in 1905. Einstein's postulates are still applicable in the modern theory but the origin of the postulates is more explicit. It was shown above how the existence of a universally constant velocity (the speed of light) is a consequence of modeling the universe as a particular four-dimensional space having certain specific properties. The principle of relativity is a result of Minkowski structure being preserved under Lorentz transformations, which are postulated to be the physical transformations of inertial reference frames.

See also

• Andromeda paradox
• Derivations of the Lorentz transformations
• History of special relativity
• Introduction to general relativity
• Invariance
• Light clock
• Spacetime
• Special relativity
• Speed of light
• Symmetry
• Symmetry in physics

Notes

• The mass of objects and systems of objects has a complex interpretation in special relativity, see relativistic mass.
• "Minkowski also shared Poincaré's view of the Lorentz transformation as a rotation in a four-dimensional space with one imaginary coordinate, and his five four-vector expressions." (Walter 1999).

1. There exists a more technical but mathematically convenient description of reference frames. A reference frame may be considered to be an identification of points in space at different times. That is, it is the identification of space points at different times as being the same point. This concept, particularly useful in making the transition to relativistic spacetime, is described in the language of affine space by VI Arnold in Mathematical Methods in Classical Mechanics, and in the language of fibre bundles by Roger Penrose in The Road to Reality.
2. Originally Minkowski tried to make his formula look like Pythagoras's theorem by introducing the concept of imaginary time and writing −1 as i. But Wilson, Gilbert, Borel and others proposed that this was unnecessary and introduced real time with the assumption that, when comparing coordinate systems, the change of spatial displacements with displacements in time can be negative. This assumption is expressed in differential geometry using a metric tensor that has a negative coefficient.
3. It should also be made clear that the length contraction result only applies to rods aligned in the direction of motion. At right angles to the direction of motion, there is no contraction.

References

This article's citations lack bibliographical information. Please read the guide to citations and add information such as author, title, date of publication, publisher, ISBN, pages cited, etc. (June 2015) (Learn how and when to remove this message)

1. "On the Electrodynamics of Moving Bodies". (fourmilab.ch web site): Translation from the German article: "Zur Elektrodynamik bewegter Körper", Annalen der Physik. 17:891-921. (June 30, 1905)
2. Peter Gabriel Bergmann (1976). Introduction to the Theory of Relativity. Reprint of first edition of 1942 with a forward by A. Einstein. Courier Dover Publications. pp. xi. ISBN 0-486-63282-2.
3. "Définition du mètre". Résolution 1 de la 17 réunion de la CGPM (in French). Sèvres: Bureau International des Poids et Mesures. 1983. Retrieved 2008-10-03. Le mètre est la longueur du trajet parcouru dans le vide par la lumière pendant une durée de 1/299 792 458 de seconde. English translation: "Definition of the metre". Resolution 1 of the 17th meeting of the CGPM. Retrieved 2008-10-03.
4. Tom Roberts and Siegmar Schleif (October 2007). "What is the experimental basis of Special Relativity?". Usenet Physics FAQ. Retrieved 2008-09-17.
5. Minkowski, Hermann (1909), "Raum und Zeit" , Physikalische Zeitschrift, 10: 75–88
   • Various English translations on Wikisource: Space and Time.
6. Walter, S.(1999) The non-Euclidean style of Minkowskian relativity. The Symbolic Universe, J. Gray (ed.), Oxford University Press, 1999 http://www.univ-nancy2.fr/DepPhilo/walter/papers/nes.pdf
7. Penrose, Roger (2004). The Road to Reality. Vintage. p. 406. ISBN 9780099440680.
8. Einstein, Albert (2001). Relativity : the special and general theory. Authorised translation by Robert W. Lawson (Reprinted ed.). London: Routledge. p. 152. ISBN 978-0-415-25538-7. It appears therefore more natural to think of physical reality as a four dimensional existence, instead of, as hitherto, the evolution of a three dimensional existence.
9. Feynman, Richard P. (1999). Six not-so-easy pieces : Einstein's relativity, symmetry and space-time. London: Penguin Books. p. xiv. ISBN 978-0-14-027667-1. The idea that the history of the universe should be viewed, physically, as a four-dimensional spacetime, rather than as a three dimensional space evolving with time is indeed fundamental to modern physics.
10. Weyl, Hermann (1952) . Space, time, matter (4th ed.). New York: Dover Books. ISBN 978-0-486-60267-7.: "The adequate mathematical formulation of Einstein's discovery was first given by Minkowski: to him we are indebted for the idea of four dimensional world-geometry, on which we based our argument from the outset."
11. Thorne, Kip; Blandford, Roger. "Chapter 1: Physics in Euclidean Space and Flat Spacetime: Geometric Viewpoint" (pdf). Ph 136: Applications of classical physics. Caltech. Special relativity is the limit of general relativity in the complete absence of gravity; its arena is flat, 4-dimensional Minkowski spacetime.
12. Einstein, Albert (2001). Relativity : the special and general theory. Authorised translation by Robert W. Lawson (Reprinted ed.). London: Routledge. p. 152. ISBN 978-0-415-25538-7.
13. "Relativity in Chemistry". Math.ucr.edu. Retrieved 2009-04-05.

External links

Special relativity for a general audience (no math knowledge required)

• Einstein Light An award-winning, non-technical introduction (film clips and demonstrations) supported by dozens of pages of further explanations and animations, at levels with or without mathematics.
• Einstein Online Introduction to relativity theory, from the Max Planck Institute for Gravitational Physics.
• Explaining Relativity for The Laymen

Special relativity explained (using simple or more advanced math)

• Wikibooks: Special Relativity
• Albert Einstein. Relativity: The Special and General Theory. New York: Henry Holt 1920. BARTLEBY.COM, 2000
• Usenet Physics FAQ
• Greg Egan's Foundations
• A Primer on Special Relativity – MathPages
• Caltech Relativity Tutorial A basic introduction to concepts of Special and General Relativity, requiring only a knowledge of basic geometry.
• Special Relativity in film clips and animations from the University of New South Wales.

v t e Relativity
Special relativity	Background Principle of relativity (Galilean relativity Galilean transformation) Special relativity Doubly special relativity Fundamental concepts Frame of reference Speed of light Hyperbolic orthogonality Rapidity Maxwell's equations Proper length Proper time Proper acceleration Relativistic mass Formulation Lorentz transformation Textbooks Phenomena Time dilation Mass–energy equivalence (E=mc) Length contraction Relativity of simultaneity Relativistic Doppler effect Thomas precession Ladder paradox Twin paradox Terrell rotation Spacetime Light cone World line Minkowski diagram Biquaternions Minkowski space
General relativity	Background Introduction Mathematical formulation Fundamental concepts Equivalence principle Riemannian geometry Penrose diagram Geodesics Mach's principle Formulation ADM formalism BSSN formalism Einstein field equations Linearized gravity Post-Newtonian formalism Raychaudhuri equation Hamilton–Jacobi–Einstein equation Ernst equation Phenomena Black hole Event horizon Singularity Two-body problem Gravitational waves: astronomy detectors (LIGO and collaboration Virgo LISA Pathfinder GEO) Hulse–Taylor binary Other tests: precession of Mercury lensing (together with Einstein cross and Einstein rings) redshift Shapiro delay frame-dragging / geodetic effect (Lense–Thirring precession) pulsar timing arrays Advanced theories Brans–Dicke theory Kaluza–Klein Quantum gravity Solutions Cosmological: Friedmann–Lemaître–Robertson–Walker (Friedmann equations) Lemaître–Tolman Kasner BKL singularity Gödel Milne Spherical: Schwarzschild (interior Tolman–Oppenheimer–Volkoff equation) Reissner–Nordström Axisymmetric: Kerr (Kerr–Newman) Weyl−Lewis−Papapetrou Taub–NUT van Stockum dust discs Others: pp-wave Ozsváth–Schücking Alcubierre In computational physics: Numerical relativity
Scientists	Poincaré Lorentz Einstein Hilbert Schwarzschild de Sitter Weyl Eddington Friedmann Lemaître Milne Robertson Chandrasekhar Zwicky Wheeler Choquet-Bruhat Kerr Zel'dovich Novikov Ehlers Geroch Penrose Hawking Taylor Hulse Bondi Misner Yau Thorne Weiss others
Category

• Articles needing cleanup from October 2008
• Cleanup tagged articles without a reason field from October 2008
• Misplaced Pages pages needing cleanup from October 2008
• Articles to be expanded from September 2007
• Special relativity