Misplaced Pages

18-inch/48-caliber Mark 1 gun

Article snapshot taken from Wikipedia with creative commons attribution-sharealike license. Give it a read and then ask your questions in the chat. We can research this topic together.
(Redirected from 18"/48 caliber Mark 1 gun)

Naval gun
18"/48 caliber Mark 1 gun
TypeNaval gun
Place of originUnited States
Service history
Used byUnited States Navy
Production history
Designed1920
No. built1
Specifications
Mass177.8 long tons (180.7 t)
Length864 in (21,946 mm)

Shell2,900 lb (1,315 kg)
Caliber18 in (457 mm)
Muzzle velocity2,700 ft/s (823 m/s)

The 18"/48 caliber Mark 1 – United States Naval Gun was the initial name and design for a large caliber naval gun in the early 1920s. After the Washington Naval Treaty prohibited the development of guns larger than 16 in (406 mm), the gun was relined and finished as a high velocity 16"/56 Mark 4 gun. After the start of World War II, the gun was again relined to 18" and tested with a new Super Heavy Shell. The gun in its final form is currently displayed at the Dahlgren Naval Weapons Facility in Virginia.

Description

After World War I, the erstwhile allies were poised to start a massive and costly naval arms race, with the United Kingdom, United States, and Japan creating plans for large fleets of new battleships and battlecruisers. The 18"/48 cal Mark 1, designed in 1920, was the result of the progression to larger and more heavily armed capital ships. It was known colloquially among the erstwhile allies as "The Croak Smokinator", croak being a popular slang term at the time and smoke referring to the smoke emanating from the barrel. It was designed to fire a 2,900 lb (1,315 kg) AP shell at a muzzle velocity of 2,700 ft/s (823 m/s). The gun prototype was halfway completed when the Washington Naval Treaty of 1922 prohibited the development of guns larger than 16-inches. Consequently, the prototype was converted to a long barrel 16-inch gun and thus never fired in its original design configuration.

Despite the treaty, battleship studies conducted in 1927-1928 had considered this gun, but was rejected due to excessive weight, very short liner life, and poor deck penetrating capability. The gun's size and weight meant that fewer 18-inch guns could be carried than 16-inch gun on a ship of a given size, while the large size and weight of the shells also reduced rate of fire.

16"/56 caliber Mark 4

Naval gun
16"/56 caliber Mark 4 gun
TypeNaval gun
Place of originUnited States
Service history
Used byUS
Production history
Produced1927
No. built1
Specifications
Mass185.2 long tons (188.2 t)
Length915 in (23,241 mm)

Shell2,100 lb (953 kg)
Caliber16 in (406 mm)
Muzzle velocity3,000 ft/s (914 m/s)
Effective firing range49,383 yd (45,156 m) at 40° with 2,100 lb AP shell

The 18"/48 cal Mark 1 was finished with an extra thick 16-inch liner, and the resulting weapon became the 16"/56 cal Mark 4. The gun was first tested at the Dahlgren proving grounds in 1927, with tests continuing into the 1930s. It fired a 2,100 lb (953 kg) AP shell at 3,000 ft/s (914 m/s) muzzle velocity, with a range of 49,383 yd (45,156 m) at 40° elevation. The high muzzle velocity of the prototype resulted in very short liner life of only 45 rounds, with a predicted liner life of 125 full charge rounds for the service weapon. During the early stages of the design process for the Iowa-class battleship, the gun was briefly considered for the main battery, but was rejected due to short liner life; the belt armor of the Montana class was also designed against the 16"/56 cal gun.

18"/47 caliber Mark A

Naval gun
18"/47 caliber Mark A gun
A display at the U.S. Navy Dahlgren Naval Weapons Facility (now Dahlgren Naval Surface Warfare Center) in Virginia, showing the 18 inch/47 (457 mm) Mark "A" (far left) and a 16 inch/50 (406mm) Mark 7 gun, as used on the Iowa-class, is just to its right. Both of these weapons fired projectiles heavier than the Volkswagen Beetle next to it. Just to the right of these guns is an 8 inch/55 (20.3 cm) Mark 16 used on the Des Moines-class heavy cruisers. Further to the right is one of the 20.3 cm/60 SK C/34 guns taken from the forward turret of the German heavy cruiser Prinz Eugen, which was allocated to the U.S. as a war prize at the end of the Second World War.
TypeNaval gun
Place of originUnited States
Service history
Used byUS
Production history
Produced1942
No. built1
Specifications
Mass559,974 lb (253,999.9 kg)
Length846 in (21,488 mm)

Shell3,850 lb (1,746 kg)
Caliber18 in (457 mm)
Muzzle velocity2,400 ft/s (732 m/s)
Effective firing range43,453 yd (39,733 m) at 40° with 3,850 lb AP shell

In 1938, with Japan's refusal to sign the Second London Naval Treaty and worsening situation in Europe and Asia, battleship studies once again considered 18-inch caliber main guns. During the early design stages of a 45,000-ton "slow" battleship alternative to the "fast" battleship design that would eventually result in the Montana class, the 18"/48 cal gun option was considered in several proposals. The 16"/56 cal Mark 4 had its threaded tip cut off and was then relined to 18-inches; this weapon was then designated as the 18"/47 cal Mark A and was used to test a 3,850 lb (1,746 kg) "Super Heavy" AP shell, which the gun fired at a nominal 2,400 ft/s (732 m/s) muzzle velocity, with a range of 43,453 yd (39,733 m) at 40° elevation. The highest energy shot was with a 3,848-lb projectile fired at 2,508 ft/s (764 m/s) with a maximum pressure of 19.91 tons per square inch.

Ultimately, the General Board decided that a 16"/50 cal gun offered the best combination of performance and weight, and the new 16"/50 caliber Mark 7 gun was used by the Iowa-class battleship design. The preeminence of naval aviation ended further developments into large caliber naval guns.

While the 18"/47 cal Mark A was used to test the new "Super Heavy" 18-inch AP shell, if the caliber had been selected, a new lightweight 18"/48 cal Mark 2 gun would have been built. The new lightweight 18-inch gun would have fired the 3,850 lb "Super Heavy" shell at 2,500 ft/s (762 m/s) muzzle velocity, with a design similar to the contemporary 16"/50 cal Mark 7 gun rather than the 1920s technology used in the 18"/47 cal Mark A construction.

While the development of large caliber naval guns ceased after World War II, the gun was subsequently used for the development of low-drag aerial bombs. In this role, the gun fired a total of 114 shots, with the final shot fired on 7 November 1957. With the conclusion of testing, the gun was placed on display at the Dahlgren Naval Weapons Facility in Virginia.

Construction

The built-up gun is constructed of liner, a tube, jacket, nine hoops, six locking rings, a separate yoke ring and screw box liner. The breech mechanism was a down-swinging Welin block with vertical lever operating gear. Chromium plating of the bore was considered in the 1940s but never carried out.

See also

References

  1. ^ "History of the U.S. Navy's Only 18-inch Gun". Naval Sea Systems Command. n.d. Retrieved 14 November 2021.
  2. Garzke & Dulin pp. 154-157
  3. Friedman pp. 330-332
  4. Garzke & Dulin, pp. 110-112
  5. Friedman pp. 308
  6. Sumrall pp.66

External links

American naval weapons of the Second World War
Capital ship main armament
Cruiser main armament
Secondary armament
Destroyer, destroyer escort
and patrol frigate armament
Submarine guns
Anti-aircraft weapons
Light weapons
Torpedoes
Anti-submarine weapons
Ship gun fire-control system
Categories: