Misplaced Pages

7.65×21mm Parabellum

Article snapshot taken from Wikipedia with creative commons attribution-sharealike license. Give it a read and then ask your questions in the chat. We can research this topic together.
(Redirected from 7.65mm Parabellum) Pistol cartridge designed by Georg Luger and Hugo Borchardt
7.65×21mm Parabellum
7.65mm Parabellum, Swiss manufacture (Thun, 1973)
TypePistol
Place of originGerman Empire
Service history
In service1898–1949
Used byGermany, Switzerland, Portugal, Brazil, United States, and Finland
WarsPhilippine-American War
World War I
World War II
Production history
DesignerGeorg Luger and Hugo Borchardt
Designed1898
ManufacturerDeutsche Waffen und Munitionsfabriken
Specifications
Parent case7.65×25mm Borchardt
Case typeRimless, bottleneck
Bullet diameter7.85 mm (0.309 in)
Land diameter7.62 mm (0.300 in)
Neck diameter8.43 mm (0.332 in)
Base diameter9.93 mm (0.391 in)
Rim diameter9.98 mm (0.393 in)
Rim thickness1.22 mm (0.048 in)
Case length21.59 mm (0.850 in)
Overall length29.85 mm (1.175 in)
Case capacity0.93 cm (14.4 gr H2O)
Rifling twist275 mm (1 in 10.83 in)
Primer typeBerdan or Boxer Small pistol
Maximum pressure235.00 MPa (34,084 psi)
Maximum CUP28,000 CUP
Ballistic performance
Bullet mass/type Velocity Energy
6.03 g (93 gr) FMJ 370 m/s (1,200 ft/s) 412 J (304 ft⋅lbf)
Source(s): Modern Firearms & Ammunition, Pistol Ammunition

The 7.65×21mm Parabellum (designated as the 7,65 Parabellum by the C.I.P. and also known as .30 Luger and 7.65mm Luger) is a rimless, bottleneck, centerfire pistol cartridge that was introduced in 1898 by German arms manufacturer Deutsche Waffen- und Munitionsfabriken (DWM) for their new Pistol Parabellum. The primary developers of the pistol cartridge were firearms designers Georg Luger and Hugo Borchardt, who developed the round from the earlier 7.65×25mm Borchardt while working at DWM.

Development

In 1897, the C-93 Borchardt pistol was submitted for testing to the Swiss Military Trials Committee. The committee found the Borchardt too heavy and unwieldy to serve as a military sidearm. Georg Luger was asked by DWM to improve upon the Borchardt pistol. He developed the 7.65×21mm Parabellum cartridge from the 7.65×25mm Borchardt. By shortening the cartridge case, Luger was able to design a narrower grip, and the toggle action required a shorter stroke than in the original Borchardt design. A transitional Borchardt-Luger model in the new caliber was submitted to the Swiss commission in 1898. After further improvements, the final result became the DWM Pistole-Parabellum ("Luger pistol"). The loading for the new cartridge was standardized and mass production began in 1900–1901 in DWM's factory in Karlsruhe, Germany.

Around 1903, a separate load was developed for Parabellum carbines, with about 20% more powder (increased from the standard 0.32–0.35 g to 0.40 g) and a blackened cartridge case. This carbine load was manufactured until sometime after World War I.

History and usage

Swiss Army 7.65mm Parabellum last batch
Swiss Parabellum Model 1900 service pistol

Since its introduction, 7.65×21mm Parabellum ammunition has been manufactured in several countries for both domestic use and for export, including Germany, Switzerland, Finland, France, Portugal, Brazil, the United Kingdom, and the United States.

In 1900, with the adoption of the Luger Parabellum Model 1900 pistol, the 7.65mm Luger became the standard pistol cartridge of the Swiss Army. The Swiss Modell 06/29 pistol served the Swiss Army until well after the adoption of a SIG P210 in 1949, and remained in limited service until the late 1960s. The SIG P210 was also manufactured in this caliber, but only for civilian use; Swiss military issues of the P210 were chambered in 9×19mm Parabellum.

The 7.65mm Parabellum was replaced by the German Army with the 9×19mm Parabellum cartridge.

Around 1900, Brazilian armed forces adopted the round for use in German-made Parabellum pistols (partially replacing the Simson Nagant-style revolver) and, later, in some Schmeisser MP-28 II submachine guns made in Belgium under license. It remained in limited use by some police forces up through the 1970s, such as the former Guanabara State Police (based in Rio de Janeiro).

The Luger pistol in 7.65mm was adopted by the Finnish in 1923 with the designation Parabellum Pistooli 23, abbreviated m/23. About 8,000 pistols were delivered, but few survived the war. Many of these pistols were rebarreled to 9mm, and a limited quantity remained in storage until 1980 for arming noncombat personnel. The Finnish Lahti L-35 pistol, a 1929 design introduced in 1935 to replace the Luger pistol, was also originally chambered in 7.65mm Parabellum before it, too, was switched over to the 9mm Parabellum.

In addition to the Luger Parabellum and the SIG P210, several other handguns have been manufactured in this caliber, mainly for commercial sale in countries that restrict civilian use of contemporary military calibers such as 9mm Parabellum. Examples include the Astra A-80, Benelli B80, Beretta M952, Beretta 92, Browning Hi-Power, Colt Commander, Mamba, some models of the Ruger P series, the SIG Sauer P220, Smith & Wesson Model 59, Walther P5, Walther P38 and P38K.

A handful of submachine guns have been manufactured in this caliber, notably the SIG Bergmann 1920 (the licensed Swiss version of the Bergmann MP-18/1), the Swiss Furrer submachine gun, and its double-barreled aerial counterpart the Flieger-Doppelpistole 1919, the M/Neuhausen MKMS, the Austrian MP34, and the Suomi M-26.

The name is derived from the Latin phrase si vis pacem, para bellum—"If you want peace, prepare for war."

Cartridge dimensions

The 7.65×21mm Parabellum has 0.93 ml (14.3 grains H2O) cartridge case capacity.

7.65×21mm Parabellum maximum CIP cartridge dimensions, all sizes in millimeters (mm)

The common rifling twist rate for this cartridge is 275 mm (1 in 10.83 in), 4 grooves, ø lands = 7.62 mm, ø grooves = 7.83 mm, land width = 3.05 mm and the primer type is small pistol. This cartridge headspaces on the shoulder of the case.

According to the official Commission internationale permanente pour l'épreuve des armes à feu portatives (CIP) guidelines, the 7.65×21mm Parabellum case can handle up to 235 MPa (34,100 psi) piezo pressure. In CIP-regulated countries, every pistol cartridge combo has to be proofed at 130% of this maximum CIP pressure to certify for sale to consumers.

Synonyms

  • 7.65×22mm Parabellum
  • .30 Luger
  • 7.65mm Luger
  • 7.65×21mm
  • 7.65×21mm Luger
  • 7.65mm Parabellum
  • 7.65mm Para

See also

References

  1. Saami pressures. (n.d.). Retrieved May 3, 2023, from https://leverguns.com/articles/saami_pressures.htm
  2. "Modern Firearms - Pistol / SMG ammunition". Archived from the original on 2012-02-13. Retrieved 2011-11-18.
  3. ^ C.I.P. TDCC datasheet 7,65 Parabellum
  4. Wilson, R. K. Textbook of Automatic Pistols, p. 244. Plantersville, SC: Small Arms Technical Publishing Company, 1943.
  • Barnes, Frank C. (1972). Cartridges of the World, 3rd Edition. Digest Books, pp. 153, 177. ISBN 0-695-80326-3.
  • Goertz, Joachim and Sturgess, Geoffrey (2010 and 2011). The Borchardt & Luger Automatic Pistols. Brad Simpson Publishing and G.L. Sturgess. pp. 1455–69. ISBN 978-0-9727815-8-9.

External links

Cartridges derived from the 7.65×25mm Borchardt or its derivatives
First generation
Second generation
Based on 7.63×25mm Mauser
Based on 7.65×21mm Parabellum
Third generation
Based on 9×19mm Parabellum
Based on 7.62x25mm Tokarev
Fourth generation
Based on 9×18mm Ultra
Based on 9×21mm
Related
Categories: