Misplaced Pages

There are several variant definitions for the terms shunt impedance and acceleration voltage relating to transit time dependence. To clear this point, this page differentiates between effective (including transit time factor) and time-independent quantities.

In accelerator physics, the term acceleration voltage means the effective voltage surpassed by a charged particle along a defined straight line. If not specified further, the term is likely to refer to the longitudinal effective acceleration voltage ${\displaystyle V_{\parallel }}$.

The acceleration voltage is an important quantity for the design of microwave cavities for particle accelerators. See also shunt impedance.

For the special case of an electrostatic field that is surpassed by a particle, the acceleration voltage is directly given by integrating the electric field along its path. The following considerations are generalized for time-dependent fields.

Longitudinal voltage

The longitudinal effective acceleration voltage is given by the kinetic energy gain experienced by a particle with velocity ${\displaystyle \beta c}$ along a defined straight path (path integral of the longitudinal Lorentz forces) divided by its charge,

${\displaystyle V_{\parallel }(\beta )={\frac {1}{q}}{\vec {e}}_{s}\cdot \int {\vec {F}}_{L}(s,t)\,\mathrm {d} s={\frac {1}{q}}{\vec {e}}_{s}\cdot \int {\vec {F}}_{L}(s,t={\frac {s}{\beta c}})\,\mathrm {d} s}$.

For resonant structures, e.g. SRF cavities, this may be expressed as a Fourier integral, because the fields ${\displaystyle {\vec {E}},{\vec {B}}}$, and the resulting Lorentz force ${\displaystyle {\vec {F}}_{L}}$, are proportional to ${\displaystyle \exp(i\omega t)}$ (eigenmodes)

${\displaystyle V_{\parallel }(\beta )={\frac {1}{q}}{\vec {e}}_{s}\cdot \int {\vec {F}}_{L}(s)\exp \left(i{\frac {\omega }{\beta c}}s\right)\,\mathrm {d} s={\frac {1}{q}}{\vec {e}}_{s}\cdot \int {\vec {F}}_{L}(s)\exp \left(ik_{\beta }s\right)\,\mathrm {d} s}$ with ${\displaystyle k_{\beta }={\frac {\omega }{\beta c}}}$

Since the particles kinetic energy can only be changed by electric fields, this reduces to

${\displaystyle V_{\parallel }(\beta )=\int E_{s}(s)\exp \left(ik_{\beta }s\right)\,\mathrm {d} s}$

Particle Phase considerations

Note that by the given definition, ${\displaystyle V_{\parallel }}$ is a complex quantity. This is advantageous, since the relative phase between particle and the experienced field was fixed in the previous considerations (the particle travelling through ${\displaystyle s=0}$ experienced maximum electric force).

To account for this degree of freedom, an additional phase factor ${\displaystyle \phi }$ is included in the eigenmode field definition

${\displaystyle E_{s}(s,t)=E_{s}(s)\;\exp \left(i\omega t+i\phi \right)}$

which leads to a modified expression

${\displaystyle V_{\parallel }(\beta )=e^{i\phi }\int E_{s}(s)\exp \left(ik_{\beta }s\right)\,\mathrm {d} s}$

for the voltage. In comparison to the former expression, only a phase factor with unit length occurs. Thus, the absolute value of the complex quantity ${\displaystyle |V_{\parallel }(\beta )|}$ is independent of the particle-to-eigenmode phase ${\displaystyle \phi }$. It represents the maximum achievable voltage that is experienced by a particle with optimal phase to the applied field, and is the relevant physical quantity.

Transit time factor

A quantity named transit time factor

${\displaystyle T(\beta )={\frac {|V_{\parallel }|}{V_{0}}}}$

is often defined which relates the effective acceleration voltage ${\displaystyle V_{\parallel }(\beta )}$ to the time-independent acceleration voltage

${\displaystyle V_{0}=\int E(s)\,\mathrm {d} s}$.

In this notation, the effective acceleration voltage ${\displaystyle |V_{\parallel }|}$ is often expressed as ${\displaystyle V_{0}T}$.

Transverse voltage

In symbolic analogy to the longitudinal voltage, one can define effective voltages in two orthogonal directions ${\displaystyle x,y}$ that are transversal to the particle trajectory

${\displaystyle V_{x,y}={\frac {1}{q}}{\vec {e}}_{x,y}\cdot \int {\vec {F}}_{L}(s)\exp \left(ik_{\beta }s\right)\,\mathrm {d} s}$

which describe the integrated forces that deflect the particle from its design path. Since the modes that deflect particles may have arbitrary polarizations, the transverse effective voltage may be defined using polar notation by

${\displaystyle V_{\perp }^{2}(\beta )=V_{x}^{2}+V_{y}^{2},\quad \alpha =\arctan {\frac {{\tilde {V}}_{y}}{{\tilde {V}}_{x}}}}$

with the polarization angle ${\displaystyle \alpha }$ The tilde-marked variables are not absolute values, as one might expect, but can have positive or negative sign, to enable a range ${\displaystyle }$ for ${\displaystyle \alpha }$. For example, if ${\displaystyle {\tilde {V}}_{x}=|V_{x}|}$ is defined, then ${\displaystyle {\tilde {V}}_{y}=V_{y}\cdot \exp(-i\arg V_{x})\in \mathbb {R} }$ must hold.

Note that this transverse voltage does not necessarily relate to a real change in the particles energy, since magnetic fields are also able to deflect particles. Also, this is an approximation for small-angle deflection of the particle, where the particles trajectory through the field can still be approximated by a straight line.

References

1. Lee, Shyh-Yuan (2004). Accelerator physics (2nd ed.). World Scientific. ISBN 978-981-256-200-5.
2. ^ Wangler, Thomas (2008). RF Linear Accelerators (2nd ed.). Wiley-VCH. ISBN 978-3-527-62343-3. (slightly different notation)

• Accelerator physics