Misplaced Pages

Adafruit Industries

Article snapshot taken from Wikipedia with creative commons attribution-sharealike license. Give it a read and then ask your questions in the chat. We can research this topic together.
American electronic components and hardware distributor
Adafruit Industries, LLC
Adafruit offices in New York
IndustryOpen-source hardware
Founded2005
FounderLimor Fried
HeadquartersNew York City (Industry City, Brooklyn), New York, United States
RevenueUS$45 million (2016)
Number of employees105 (2016)
Websitewww.adafruit.com

Adafruit Industries is an open-source hardware company based in New York, United States. It was founded by Limor Fried in 2005. The company designs, manufactures and sells electronics products, electronics components, tools, and accessories. It also produces learning resources, including live and recorded videos about electronics, technology, and programming.

History

Limor Fried, then a student at Massachusetts Institute of Technology, began selling electronic kits on her website from her own designs in 2005. She later moved to New York City and established Adafruit Industries.

In 2010, Adafruit offered a US$1,000 (equivalent to $1,397 in 2023) reward for whoever could hack Microsoft's Kinect to make its motion-sensing capabilities available for use for other projects. This reward was increased to $2,000 and then $3,000 after Microsoft said it would work to prevent such "tampering". In November, the reward was issued to Hector Martin for his open-source Kinect driver.

The company had $22 million in revenue in 2013 and $33 million in 2014.

Company name

The name Adafruit comes from Fried's online moniker "Ladyada", a homage to computer science pioneer Ada Lovelace. The company aims to get more people involved in technology, science and engineering.

Products

In addition to distributing third-party components and boards such as the Raspberry Pi, Adafruit develops and sells its own development boards for educational and hobbyist purposes. In 2016, the company released the Circuit Playground, a board with an Atmel ATmega32u4 microcontroller and a variety of sensors, followed in 2017 by the more powerful Atmel SAMD21 based Circuit Playground Express. They, like many Adafruit products, are circular in shape for ease of use in education and wearable electronics projects, along with the FLORA and Gemma, the company's wearable electronics development platforms. In 2017, Adafruit Industries' best-selling product was the Circuit Playground Express

NeoPixel

Adafruit Mini Neopixels
Mini NeoPixels with comparison to a Canadian quarter

NeoPixel is Adafruit's brand of individually addressable red-green-blue (RGB) LED. They are based on the WS2812 LED and WS2811 driver, where the WS2811 is integrated into the LED, for reduced footprint. Adafruit manufactures several products with NeoPixels with form factors such as strips, rings, matrices, Arduino shields, traditional five-millimeter cylinder LED and individual NeoPixel with or without a PCB. The control protocol for NeoPixels is based on only one communication wire. Adafruit provides an Arduino library and a Python Library to help with the programming of NeoPixels. In addition to the traditional RGB technology, Adafruit manufactures a red-green-blue-white (RGBW) variant of NeoPixel for all products except those that feature a NeoPixel Mini 3535. Those integrate an additional white LED in the package for extra possible color mixes and selectable white color temperature (the company sells single NeoPixels with a 6000 K, 4500 K and 3000 K color temperature).

CircuitPython

In January, 2017, Adafruit introduced CircuitPython, a fork of the MicroPython programming language optimized to run on Adafruit and third-party products. CircuitPython runs on Adafruit boards with a flash memory chip and a supported microcontroller or single-board computer.

In 2019, resources for CircuitPython were moved to circuitpython.org, reflecting the appearance of non-Adafruit boards that use CircuitPython. This includes CircuitPython for microcontrollers and CircuitPython on single-board computers using a compatibility layer Adafruit named "Blinka", to access general-purpose input/output functionality and compatibility.

Adafruit has fostered a community which has contributed software libraries for more than 488 sensors and drivers.

Feather development boards

Adafruit Feather M0 Basic Proto Development Board
A headerless Adafruit Feather M0 Basic Proto Development Board

Feather is Adafruit's largest brand of "Arduino-like" boards and accessories. The boards share a form factor, pinouts, and lithium polymer battery charging. Certain boards add special features such as Bluetooth, Wi-Fi or cellular network connectivity, built-in prototyping space, or SD card communication. More features can be added with "FeatherWing" expansion cards that with an LCD or NeoPixel array, DC motor drivers, and other capabilities.

A fairly complete list of Feather form factor boards, FeatherWings and accessories has been compiled into a GitHub Awesome List.

Adafruit Learning System

Adafruit publishes tutorials-nearly 3,000 as of 2024—that show how to build projects with their products, tear down wearable electronic devices, 3D printing, and more. The company also hosts articles written by collaborators.

Presence on YouTube

Adafruit Industries has a substantial presence on the online video streaming website YouTube. The channel has been active since April 2, 2006. The company was awarded a YouTube Silver Play Button in August 2015 when it surpassed 100,000 subscribers; as of October 2022, it had 420,000. Adafruit creates different types of videos, all on electronics, with most featuring one of their products. Each week, several live shows are streamed.

Ask an Engineer

This weekly show was started in 2010 in Fried's living room. The concept was that viewers could ask her questions about engineering while she was assembling an electronics kit and Phillip Torrone, her spouse, was preparing shipments. The show is broadcast on YouTube with behind-the-scenes content available on Discord. The company states that this is the longest-running live electronics show. Some of the sections of the stream are new products where Fried demonstrates new products; Time Travel, where the hosts look back on the world of makers, hackers, artists and engineers and often highlight a special person or event; 3D Printing, where they showcase a special project or product related to the industry; a Q&A session; and a trivia question, where the first viewer with the correct answer wins a product. There is sometimes a section dedicated to Raspberry Pi and Arduino news and a section where the hosts read a positive email they have received. The show airs on Wednesdays at 8PM ET on the company's YouTube channel and is still run by Limor Fried and Phillip Torrone, with guests often present. As of February 2016, there have been almost 200 editions of the show, totalling almost 7 million minutes watched, a half million video views and 33 thousand playlist views.

Show-and-Tell

Show-and-Tell is Adafruit's live show where makers from all around the world share electronic projects they are currently working on. The show is first broadcast at 7:30PM ET on Wednesdays, and runs for 30 minutes. It is hosted by Limor Fried and Phillip Torrone and uses the Google+ Hangouts platform. Over the four years that it has been running, Show-and-Tell has been produced more than 200 times, collecting more than 2.8 million minutes watched, about 500,000 video views and with 27,000 playlist views.

3D Hangouts with Noe and Pedro Ruiz

3D Hangouts with Noe and Pedro Ruiz goes over the 3D printing industry (most typically about desktop FDM printers). Every week, on Thursday, a 30-minute edition is released where the two brothers discuss news about the industry, specific projects that they are working on, share 3D printing tips and tricks and answer viewer's questions and comments. They also showcase projects and prints from the online community. The show was started in 2014.

John Park's Workshop

The weekly John Park's Workshop show is broadcast live from John Edgar Park's workshop as he builds creative technology projects – from mystery boxes to ninja timers to synthesizers to coffee robots – while teaching viewers the skills to create their own. The creations made by Park demonstrate the weekly project (which is later developed into a tutorial on Adafruit's Learning System), covers fundamental tips and tricks for working with the featured tools and materials, interacts with viewers, and answers questions over chat messaging systems in YouTube and Discord.

Wearable Electronics with Becky Stern

Wearable Electronics with Becky Stern was Adafruit's live show dedicated to the wearable electronics industry. It was hosted by the American artist Becky Stern. In the show, industry news, projects, techniques and materials were covered and discussed. It aired every Wednesday at 2PM ET and was produced for 122 episodes, from 2013 to 2016. The last edition was streamed on February 10, 2016.

Customer support

Adafruit provides customer support via its forums. Emails to their support address receive automated responses referring customers to the support forums or the Adafruit Discord server.

See also

References

  1. "Gizmo Maker Adafruit Leaves Manhattan for 42K SF at Brooklyn's Industry City". industrycity.com. June 5, 2024. Retrieved July 14, 2024.
  2. ^ Gareth Branwyn (June 14, 2017). "Ladyada and Adafruit featured in the latest issue of Make". Boing Boing. Retrieved October 29, 2018.
  3. Porter, Jane (2012-09-12). "Spotlight: Adafruit Industries' Limor Fried, Entrepreneur of 2012 Finalist". Entrepreneur. Retrieved 2020-04-22.
  4. "Entrepreneur of 2012: Limor Fried". 18 December 2012. Retrieved February 22, 2015.
  5. "Women Entrepreneurs to Bet On". Newsweek. 7 May 2014. Retrieved February 22, 2015.
  6. ^ Matt Weinberger (August 18, 2015). "How one woman turned her passion for tinkering into a $33 million business – without a dime of funding". Business Insider. Retrieved October 21, 2018.
  7. "Bounty offered for open-source Kinect driver". cnet.com. Retrieved December 9, 2015.
  8. Brown, Mark. "$2,000 Bounty Put on Open-Source Kinect Drivers". Wired. Retrieved December 9, 2015.
  9. "Kinect Hack Makes Microsoft Angry, Deny its Existence". PCWorld. Retrieved November 23, 2015.
  10. Rozenfeld, Monica (September 9, 2015). "How DIY Electronics Startup Adafruit Industries Became a Multimillion-Dollar Company: IEEE Member Limor Fried started the venture in her dorm room at MIT". IEEE. Archived from the original on September 18, 2015. Retrieved February 23, 2016.
  11. Horsey, Julian (January 14, 2016). "Adafruit Unveils New Circuit Playground Board To Learn About Electronics". Geeky Gadgets. Retrieved January 16, 2016.
  12. "Adafruit's best open source wearables of 2015". Opensource.com. Retrieved January 16, 2016.
  13. Fried, Limor; Burgess, Phil (2019-01-17). "Adafruit NeoPixel Library". GitHub. Adafruit. Retrieved 2019-02-21.
  14. Fried, Limor; Burgess, Phil (2019-02-05). "Adafruit CircuitPython NeoPixel". GitHub. Adafruit. Retrieved 2019-02-21.
  15. "Awesome CircuitPython List". GitHub. Retrieved December 21, 2018.
  16. Shawcroft, Scott. "Adafruit CircuitPython". GitHub. Retrieved 2019-02-21.
  17. "CircuitPython". Retrieved 2019-07-27.
  18. "CircuitPython Blinka". Retrieved 2019-07-27.
  19. "Python on Microcontrollers Newsletter". Retrieved 17 July 2024.
  20. "CircuitPython Libraries". Retrieved 17 July 2024.
  21. ^ Barela, Anne (2019-02-19). "Awesome Feather" (Markdown). GitHub. Adafruit. Retrieved 2019-02-21.
  22. "Adafruit Learning System". Retrieved December 30, 2020.
  23. "An interview with Limor Fried, Founder at Adafruit". Archived from the original on February 23, 2015. Retrieved February 22, 2015.
  24. "Adafruit channel on YouTube.com". YouTube. Archived from the original on 2009-04-03. Retrieved September 5, 2021.
  25. Stern, Becky (2016-02-10). "Jess cohosts Wearable Electronics with Becky Stern 2/10/2016 – LIVE". YouTube. Adafruit. Retrieved 2019-02-21.
  26. "Contact Us : Adafruit Industries, Unique & fun DIY electronics and kits". www.adafruit.com. Retrieved 2023-04-27.
  27. "adafruit industries - Forums Index". forums.adafruit.com. Retrieved 2023-04-27.
  28. "Adafruit Discord Server". Retrieved 2024-07-14.

External links

Categories: