Misplaced Pages

ArduPilot

Article snapshot taken from Wikipedia with creative commons attribution-sharealike license. Give it a read and then ask your questions in the chat. We can research this topic together.
Open-source autopiloting library
Developer(s)ArduPilot Development Team and Community
Initial release2009
Repositoryhttps://github.com/ArduPilot
Written inC++, Python
Operating systemCross-platform
LicenseGPLv3
Websitehttp://ardupilot.org

ArduPilot is an open source, uncrewed vehicle Autopilot Software Suite, capable of controlling:

ArduPilot was originally developed by hobbyists to control model aircraft and rovers and has evolved into a full-featured and reliable autopilot used by industry, research organisations and amateurs.

Software and Hardware

Software suite

BlueROV2 diving with ArduSub

The ArduPilot software suite consists of navigation software (typically referred to as firmware when it is compiled to binary form for microcontroller hardware targets) running on the vehicle (either Copter, Plane, Rover, AntennaTracker, or Sub), along with ground station controlling software including Mission Planner, APM Planner, QGroundControl, MavProxy, Tower and others.

ArduPilot source code is stored and managed on GitHub, with over 800 contributors.

The software suite is automatically built nightly, with continuous integration and unit testing provided by Travis CI, and a build and compiling environment including the GNU cross-platform compiler and Waf. Pre-compiled binaries running on various hardware platforms are available for user download from ArduPilot's sub-websites.

An octocopter flying with Ardupilot
An octocopter flying with Ardupilot

Supported hardware

Copter, Plane, Rover, AntennaTracker, or Sub software runs on a wide variety of embedded hardware (including full blown Linux computers), typically consisting of one or more microcontroller or microprocessor connected to peripheral sensors used for navigation. These sensors include MEMS gyroscopes and accelerometers at a minimum, necessary for multirotor flight and plane stabilization. Sensors usually include, in addition, one or more compass, altimeter (barometric) and GPS, along with optional additional sensors such as optical flow sensors, airspeed indicators, laser or sonar altimeters or rangefinders, monocular, stereoscopic or RGB-D cameras. Sensors may be on the same electronic board, or external.

Ground Station software, used for programming or monitoring vehicle operation, is available for Windows, Linux, macOS, iOS, and Android.

ArduPilot runs on a wide variety of hardware platforms, including the following, listed in alphabetical order:

  • Intel Aero (Linux or STM32 Base)
  • APM 2.X (Atmel Mega Microcontroller Arduino base), designed by Jordi Munoz in 2010. APM, for ArduPilotMega, only runs on older versions of ArduPilot.
  • BeagleBone Blue and PXF Mini (BeagleBone Black cape).
  • The Cube, formerly called Pixhawk 2, (ARM Cortex microcontroller base), designed by ProfiCNC in 2015.
  • Edge Archived 2019-04-03 at the Wayback Machine, drone controller with video streaming system, designed by Emlid.
  • Erle-Brain Archived 2018-05-27 at the Wayback Machine, (Linux base) designed by Erle Robotics.
  • Intel Minnowboard (Linux Base).
  • Navigator Flight Controller by Blue Robotics
  • Navio2 and Navio+ (Raspberry Pi Linux based), designed by Emlid.
  • Parrot Bebop, and Parrot C.H.U.C.K., designed by Parrot, S.A.
  • Pixhawk, (ARM Cortex microcontroller base), originally designed by Lorenz Meier and ETH Zurich, improved and launched in 2013 by PX4, 3DRobotics, and the ArduPilot development team.
  • PixRacer, (ARM Cortex microcontroller base) designed by AUAV.
  • Qualcomm SnapDragon (Linux base).
  • Virtual Robotics VRBrain (ARM Cortex microcontroller base).
  • Xilinx SoC Zynq processor (Linux base, ARM and FPGA processor).

In addition to the above base navigation platforms, ArduPilot supports integration and communication with on-vehicle companion, or auxiliary computers for advanced navigation requiring more powerful processing. These include NVidia TX1 and TX2 ( Nvidia Jetson architecture), Intel Edison and Intel Joule, HardKernel ODROID, and Raspberry Pi computers.

Features

Common to all vehicles

ArduPilot provides a large set of features, including the following common for all vehicles:

  • Fully autonomous, semi-autonomous and fully manual flight modes, programmable missions with 3D waypoints, optional geofencing.
  • Stabilization options to negate the need for a third party co-pilot.
  • Simulation with a variety of simulators, including ArduPilot SITL.
  • Large number of navigation sensors supported, including several models of RTK GPSs, traditional L1 GPSs, barometers, magnetometers, laser and sonar rangefinders, optical flow, ADS-B transponder, infrared, airspeed, sensors, and computer vision/motion capture devices.
  • Sensor communication via SPI, I²C, CAN Bus, Serial communication, SMBus.
  • Failsafes for loss of radio contact, GPS and breaching a predefined boundary, minimum battery power level.
  • Support for navigation in GPS denied environments, with vision-based positioning, optical flow, SLAM, Ultra Wide Band positioning.
  • Support for actuators such as parachutes and magnetic grippers.
  • Support for brushless and brushed motors.
  • Photographic and video gimbal support and integration.
  • Integration and communication with powerful secondary, or "companion", computers
  • Rich documentation through ArduPilot wiki.
  • Support and discussion through ArduPilot discourse forum, Gitter chat channels, GitHub, Facebook.

Copter-specific

  • Flight modes: Stabilize, Alt Hold, Loiter, RTL (Return-to-Launch), Auto, Acro, AutoTune, Brake, Circle, Drift, Guided, (and Guided_NoGPS), Land, PosHold, Sport, Throw, Follow Me, Simple, Super Simple, Avoid_ADSB.
  • Auto-tuning
  • Wide variety of frame types supported, including tricopters, quadcopters, hexacopters, flat and co-axial octocopters, and custom motor configurations
  • Support for traditional electric and gas helicopters, mono copters, tandem helicopters.

Plane-specific

  • Fly By Wire modes, loiter, auto, acrobatic modes.
  • Take-off options: Hand launch, bungee, catapult, vertical transition (for VTOL planes).
  • Landing options: Adjustable glide slope, helical, reverse thrust, net, vertical transition (for VTOL planes).
  • Auto-tuning, simulation with JSBSIM, X-Plane and RealFlight simulators.
  • Support for a large variety of VTOL architectures: Quadplanes, Tilt wings, tilt rotors, tail sitters, ornithopters.
  • Optimization of 3 or 4 channel airplanes.

Rover-specific

  • Manual, Learning, Auto, Steering, Hold and Guided operational modes.
  • Support for wheeled and track architectures.

Submarine-specific

  • Depth hold: Using pressure-based depth sensors, submarines can maintain depth within a few centimeters.
  • Light Control: Control of subsea lighting through the controller.

ArduPilot is fully documented within its wiki, totaling the equivalent of about 700 printed pages and divided in six top sections: The Copter, Plane, Rover, and Submarine vehicle related subsections are aimed at users. A "developer" subsection for advanced uses is aimed primarily at software and hardware engineers, and a "common" section regrouping information common to all vehicle types is shared within the first four sections.

ArduPilot use cases

Hobbyists and amateurs

Professional

History

Early years, 2007–2012

The ArduPilot project earliest roots date back to late 2007 when Jordi Munoz, who later co-founded 3DRobotics with Chris Anderson, wrote an Arduino program (which he called "ArduCopter") to stabilize an RC Helicopter. In 2009 Munoz and Anderson released Ardupilot 1.0 (flight controller software) along with a hardware board it could run on. That same year Munoz, who had built a traditional RC helicopter UAV able to fly autonomously, won the first Sparkfun AVC competition. The project grew further thanks to many members of the DIY Drones community, including Chris Anderson who championed the project and had founded the forum based community earlier in 2007.

The first ArduPilot version supported only fixed-wing aircraft and was based on a thermopile sensor, which relies on determining the location of the horizon relative to the aircraft by measuring the difference in temperature between the sky and the ground. Later, the system was improved to replace thermopiles with an Inertial Measurement Unit (IMU) using a combination of accelerometers, gyroscopes and magnetometers. Vehicle support was later expanded to other vehicle types which led to the Copter, Plane, Rover, and Submarine subprojects.

The years 2011 and 2012 witnessed an explosive growth in the autopilot functionality and codebase size, thanks in large part to new participation from Andrew "Tridge" Tridgell and HAL author Pat Hickey. Tridge's contributions included automatic testing and simulation capabilities for Ardupilot, along with PyMavlink and Mavproxy. Hickey was instrumental in bringing the AP_ HAL library to the code base: HAL (Hardware Abstraction Layer) greatly simplified and modularized the code base by introducing and confining low-level hardware implementation specifics to a separate hardware library. The year 2012 also saw Randy Mackay taking the role of lead maintainer of Copter, after a request from former maintainer Jason Short, and Tridge taking over the role of lead Plane maintainer, after Doug Weibel who went on to earn a Ph.D. in Aerospace Engineering. Both Randy and Tridge are current lead maintainers to date.

The free software approach to ArduPilot code development is similar to that of the Linux Operating system and the GNU Project, and the PX4/Pixhawk and Paparazzi Project, where low cost and availability enabled hobbyists to build autonomous small remotely piloted aircraft, such as micro air vehicles and miniature UAVs. The drone industry, similarly, progressively leveraged ArduPilot code to build professional, high-end autonomous vehicles.

Maturity, 2013–2016

While early versions of ArduPilot used the APM flight controller, an AVR CPU running the Arduino open-source programming language (which explains the "Ardu" part of the project name), later years witnessed a significant re-write of the code base in C++ with many supporting utilities written in Python.

Between 2013 and 2014 ArduPilot evolved to run on a range of hardware platforms and operating system beyond the original Arduino Atmel based microcontroller architecture, first with the commercial introduction of the Pixhawk hardware flight controller, a collaborative effort between PX4, 3DRobotics and the ArduPilot development team, and later to the Parrot's Bebop2 and the Linux-based flight controllers like Raspberry Pi based NAVIO2 and BeagleBone based ErleBrain. A key event within this time period included the first flight of a plane under Linux in mid 2014.

Late 2014 saw the formation of DroneCode, formed to bring together the leading open source UAV software projects, and most notably to solidify the relationship and collaboration of the ArduPilot and the PX4 projects. ArduPilot's involvement with DroneCode ended in September 2016. 2015 was also a banner year for 3DRobotics, a heavy sponsor of ArduPilot development, with its introduction of the Solo quadcopter, an off the shelf quadcopter running ArduPilot. Solo's commercial success, however, was not to be.

Fall of 2015 again saw a key event in the history of the autopilot, with a swarm of 50 planes running ArduPilot simultaneously flown at the Advanced Robotic Systems Engineering Laboratory (ARSENL) team at the Naval Postgraduate School.

Within this time period, ArduPilot's code base was significantly refactored, to the point where it ceased to bear any similarity to its early Arduino years.

Current, 2018–present

ArduPilot code evolution continues with support for integrating and communicating with powerful companion computers for autonomous navigation, plane support for additional VTOL architectures, integration with ROS, support for gliders, and tighter integration for submarines. The project evolves under the umbrella of ArduPilot.org, a project within the Software in the Public Interest (spi-inc.org) not-for-profit organisation. ArduPilot is sponsored in part by a growing list of corporate partners.

UAV Outback Challenge

In 2012, the Canberra UAV Team successfully took first place in the prestigious UAV Outback Challenge. The CanberraUAV Team included ArduPlane Developers and the airplane flown was controlled by an APM 2 Autopilot. In 2014 the CanberraUAV Team and ArduPilot took first place again, by successfully delivering a bottle to the "lost" hiker. In 2016 ArduPilot placed first in the technically more challenging competition, ahead of strong competition from international teams.

Community

ArduPilot is jointly managed by a group of volunteers located around the world, using the Internet (discourse based forum, gitter channel) to communicate, plan, develop and support it. The development team meets weekly in a chat meeting, open to all, using Mumble. In addition, hundreds of users contribute ideas, code and documentation to the project. ArduPilot is licensed under the GPL Version 3 and is free to download and use.

Customizability

The flexibility of ArduPilot makes it very popular in the DIY field but it has also gained popularity with professional users and companies. 3DRobotics' Solo quadcopter, for instance, uses ArduPilot, as have a large number of professional aerospace companies such as Boeing. The flexibility allows for support of a wide variety of frame types and sizes, different sensors, camera gimbals and RC transmitters depending on the operator's preferences.

ArduPilot has been successfully integrated into many airplanes such as the Bixler 2.0. The customizability and ease of installation have allowed the ArduPilot platform to be integrated for a variety of missions. The Mission Planner (Windows) ground control station allows the user to easily configure, program, use, or simulate an ArduPilot board for purposes such as mapping, search and rescue, and surveying areas.

See also

Other projects for autonomous aircraft control:

Other projects for ground vehicles & cars driven:

References

  1. "Community: — ArduPilot documentation". ardupilot.org. Retrieved 2017-04-30.
  2. "Corporate Partners". ardupilot.org. Retrieved 2018-01-14.
  3. Eure, Kenneth W. (December 2013). "An Application of UAV Attitude Estimation Using a Low-Cost Inertial Navigation System" (PDF). NTRS.nasa.gov. NASA/TM–2013-218144.
  4. "ArduPilot/ardupilot". GitHub. Retrieved 2024-08-21.
  5. "Please welcome ArduPilotMega 2.0!". diydrones.com. December 2011. Retrieved 2017-05-01.
  6. "Linux and the future of drones [LWN.net]". lwn.net. Retrieved 2017-05-05.
  7. Press (2013-08-29). "PX4 and 3D Robotics present Pixhawk: An Advanced, User-Friendly Autopilot - sUAS News - The Business of Drones". sUAS News - The Business of Drones. Retrieved 2017-05-01.
  8. "First successful flight powered by Zynq processor - Aerotenna". Aerotenna. 2015-10-08. Archived from the original on 2017-04-21. Retrieved 2017-05-05.
  9. "Flight Modes — Copter documentation". ardupilot.org. Retrieved 2017-05-01.
  10. "ArduCopter V1 Beta". forum.arduino.cc. 7 November 2007. Retrieved 2017-05-01.
  11. "ArduPilot, an open source autopilot, now available ($24.95!) - RC Groups". www.rcgroups.com. Retrieved 2017-05-08.
  12. "2009 AVC - AVC.SFE". avc.sparkfun.com. Retrieved 2017-05-03.
  13. ^ "ArduPilot". ArduPilot.org.
  14. "Drone Makers Get Help From the Open-Source, DIY Crowd - Businessweek". April 1, 2013. Archived from the original on 2013-04-01.
  15. "First flight of ArduPilot on Linux". diydrones.com. 20 August 2014. Retrieved 2017-05-03.
  16. "Introducing the Dronecode Foundation". diydrones.com. 13 October 2014. Retrieved 2017-05-03.
  17. "ArduPilot and DroneCode part ways". diydrones.com. 9 September 2016. Retrieved 2017-05-03.
  18. Mac, Ryan. "Behind The Crash Of 3D Robotics, North America's Most Promising Drone Company". Forbes. Retrieved 2017-05-03.
  19. Davies, Alex. "Boeing's Experimental Cargo Drone is a Heavy Lifter". Wired.
Categories: