Misplaced Pages

Back-side bus

Article snapshot taken from Wikipedia with creative commons attribution-sharealike license. Give it a read and then ask your questions in the chat. We can research this topic together.
Computer architecture terminology

In personal computer microprocessor architecture, a back-side bus (BSB), or backside bus, was a computer bus used on early Intel platforms to connect the CPU to CPU cache memory, usually off-die L2. If a design utilizes a back-side bus along with a front-side bus (FSB), the design is said to use a dual-bus architecture, or in Intel's terminology Dual Independent Bus (DIB) architecture. The back-side bus architecture evolved when newer processors like the second-generation Pentium III began to incorporate on-die L2 cache, which at the time was advertised as Advanced Transfer Cache, but Intel continued to refer to the Dual Independent Bus till the end of Pentium III.

History

BSB is an improvement over the older practice of using a single system bus, because a single bus typically became a severe bottleneck as CPUs and memory speeds increased. Due to its dedicated nature, the back-side bus can be optimized for communication with cache, thus eliminating protocol overheads and additional signals that are required on a general-purpose bus. Furthermore, since a BSB operates over a shorter distance, it can typically operate at higher clock speeds, increasing the computer's overall performance.

Cache connected with a BSB was initially external to the microprocessor die, but now is usually on-die. In the latter case, the BSB clock frequency is typically equal to the processor's, and the back-side bus can also be made much wider (256-bit, 512-bit) than either off-chip or on-chip FSB.

A Pentium II processor module with its cover removed showing the processor on the left and the L2 cache memory on the right

The dual-bus architecture was used in a number of designs, including the IBM and Freescale (formerly the semiconductor division of Motorola) PowerPC processors (certain PowerPC 604 models, the PowerPC 7xx family, and the Freescale 7xxx line), as well as the Intel Pentium Pro, Pentium II and early Pentium III processors, which used it to access their L2 cache (earlier Intel processors accessed the L2 cache over the FSB, while later processors moved it on-chip).

See also

References

  1. "Dedicated Backside Cache Bus". PCguide.com. 2001-04-30.
  2. Pentium® III Processors for Applied Computing product brief
  3. "Buses: frontside and backside". ITworld. 2001-04-30. Archived from the original on 2001-05-02.
  4. "Buses: frontside and backside". ITworld. 2001-04-30. Archived from the original on 2001-05-02.
  5. "Monday a big day for Apple". CNet. 1997-11-07.
  6. "Backside Bus". Whatis.com. 2001-04-30.
Technical and de facto standards for wired computer buses
General
Standards
Storage
Peripheral
Audio
Portable
Embedded
Interfaces are listed by their speed in the (roughly) ascending order, so the interface at the end of each section should be the fastest.
Category
Processor technologies
Models
Architecture
Instruction set
architectures
Types
Instruction
sets
Execution
Instruction pipelining
Hazards
Out-of-order
Speculative
Parallelism
Level
Multithreading
Flynn's taxonomy
Processor
performance
Types
By application
Systems
on chip
Hardware
accelerators
Word size
Core count
Components
Functional
units
Logic
Registers
Control unit
Datapath
Circuitry
Power
management
Related
Category: