Article snapshot taken from Wikipedia with creative commons attribution-sharealike license.
Give it a read and then ask your questions in the chat.
We can research this topic together.
Formula racing car by Brabham
Brabham BT23CBrabham BT23 of Jochen Rindt
The BT23 was designed as a Formula 2 racing car and most of the vehicles of this type were also used in this racing series. There was also a Tasman version and some BT23s were converted for Formula One by private drivers.
Design
The car was equipped with a tubular chassis in space-frame configuration, while the engine that equipped it was a Ford-Cosworth FVA, a 4-cylinder in-line of 1 600 cm³ capable of delivering a maximum power of 200–220 bhp (150–160 kW), which droves the rear wheels through a F.T.200 Hewland five-speed manual gearbox. The suspension consisted of double wishbones, coaxial coil springs, and a stabilizer bar in the front section and inverted lower wishbones, trailing arms, coil springs, and stabilizer bars in the rear section. The braking system consisted of four disc brakes.
The car had a space frame, which was reinforced by load-bearing plates in the Tasman version. Jochen Rindt dominated the 1967 and 1968 Formula 2 seasons with the BT23 at will. He won nine rounds out of 15 in 1967, but, being an A driver, did not score points for the European Drivers' Championship.
* The entries in the 1967 and 1969 German Grands Prix were in the Formula 2 class and were therefore ineligible for World Championship points or classification.
Gerhard Mitter
Alan Rees
Xavier Perrot
John Cordts
Jochen Rindt
Roy Pike
Graham McRae
