.jpg)
The Bristol Odin is a ramjet engine originally developed by Bristol Siddeley Engines, later taken over by Rolls-Royce.
Odin was specifically designed to power the Sea Dart missile. Unlike the earlier Thor ramjet powering the Bristol Bloodhound missile, Odin is an integral part of the Sea Dart airframe. A biconic intake at the front of the missile transfers air, via a transfer duct, to the ramjet combustor, which is located towards the rear of the missile. Thrust is provided by the combustion products exiting the engine at high velocity, via a fixed area ratio convergent-divergent nozzle. The only significant moving part in the engine is the turbopump. This extracts 'ram' air in the transfer duct to drive an air-turbine, which is connected to the fuel pump. The air exiting the turbine is dumped overboard.
References
- "Rolls-Royce Bristol Odin ramjet for the Sea Dart". National Archives. Retrieved 12 December 2015.
- "Odin- another stride in the ramjet age". Flight International: 4. 1966.
- "British Ramjets". Flight: 212–213. 10 August 1956.
| Bristol / Bristol Siddeley aero engines | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Bristol Aeroplane Company Piston engines (1920-1956) |
| ||||||||
| Bristol Siddeley gas turbine and rocket engines (1959-1966) |
| ||||||||
| Designers | |||||||||
 |
This aircraft engine article is missing some (or all) of its specifications. If you have a source, you can help Misplaced Pages by adding them. |