Clip and scotch - Misplaced Pages

Point clip from Bungendore Railway Station

To clip and scotch a set of railway points (Amer. a switch) uses two pieces of equipment to temporarily lock a set of points into a particular position. The point clip clamps the end of a moving rail (the switch rail) of a set of points to its associated stock rail, and the scotch is a timber wedge used to ensure that the other moving rail is kept away from its associated stock rail. In this way the points are fixed in either the 'normal' or 'reverse' positions and cannot be moved by the usual setting mechanisms. For infrequently used points, this guards against mechanical failure of the points leaving them in a condition to derail trains. The 'clip and scotch' method can also be used to positively deny access to the turnout or mainline.

Scotch block

A 'scotch block' is not used, as this is a different piece of equipment clamped to a rail used to ensure that stationary railway vehicles do not move, with much the same function as chocks used to keep aircraft stationary.

Spike and wedge

In North America the term Spike and Wedge is used as instead of a clip, a rail spike is driven through a hole set in the metal base plate that is located flush up against the switch rail, holding it in place against the stock rail. The block of wood set in the open gap is known as the wedge and is functionally equivalent to a scotch.

References

"Requirements for the Design, Operation and Maintenance of Points" (PDF). Safety & Standards Directorate, Railtrack PLC, Evergreen House, 160 Euston Road, London NW1 2DX. December 2000. Archived from the original (PDF) on October 6, 2007. Retrieved 2007-02-26. (NOTE: Document not found/no longer available as at 12-Feb-2018)
"LUL RAILWAY SAFETY CASE VERSION 3.24 GLOSSARY" (PDF). London Underground Limited. 2004-08-02. Archived from the original (PDF) on May 22, 2005. Retrieved 2007-02-26.

"ANPR 707: Clipping Points" (PDF). ARTC. 30 June 2010. Archived from the original (PDF) on 30 October 2016. Retrieved 3 November 2011.

v t e Rail infrastructure
Tracks (history)	Axe ties Ballast Baulk road Breather switch Cant Clip and scotch Date nail Fastening system Fishplate Ladder track Minimum radius Profile Tie/Sleeper Transition curve
Trackwork	Balloon loop Classification yard Headshunt Pocket track Junction Gauntlet track Guide bar Passing loop Track gauge dual gauge Rail track tramway track Rail yard Railway electrification overhead lines third rail ground-level power supply Railway turntable Transfer table (traverser) Roll way Siding refuge siding Switch Track geometry Water crane Water trough Wye
Signalling and safety	Anti-trespass panels Block post Buffer stop Catch points Defect detector Derailer Guard rail Interlocking Level crossing Loading gauge Platform screen doors Railway signal Signalling control Structure gauge Signal bridge Tell-tale Train stop Wayside horn
Structures	Coaling tower Motive power depot/Railway workshop Platform Roundhouse Shed for trains for goods Station building clock ghost list Water stop
Types	Industrial Military Private station list

This rail-transport related article is a stub. You can help Misplaced Pages by expanding it.

Categories: