The Distance Vector Multicast Routing Protocol (DVMRP), defined in RFC 1075, is a routing protocol used to share information between routers to facilitate the transportation of IP multicast packets among networks. It formed the basis of the Internet's historic multicast backbone, Mbone.
Operation
The protocol is based on the Routing Information Protocol (RIP). The router generates a routing table with the multicast group of which it has knowledge with corresponding distances (i.e. number of devices/routers between the router and the destination). When a multicast packet is received by a router, it is forwarded by the router's interfaces specified in the routing table.
DVMRP operates via a reverse path flooding technique, sending a copy of a received packet (specifically IGMP messages for exchanging routing information with other routers) out through each interface except the one at which the packet arrived. If a router (i.e. a LAN which it borders) does not wish to be part of a particular multicast group, it sends a "prune message" along the source path of the multicast.
Criticisms
Being a naïve distance-vector protocol, DVMRP has difficulties with network scaling in some topologies, primarily due to the periodic reflooding necessary to detect new hosts. This was more prevalent in early versions of the protocol, prior to the implementation of pruning. DVMRP's flat unicast routing mechanism, which is used to determine the source interface of a data stream, also affects its ability to scale.
See also
References
- DVMRP: Distance Vector Multicast Routing Protocol Archived June 22, 2009, at the Wayback Machine
- What is DVMRP?
- Multicast Routing May 5, 1995