EN 10080 - Misplaced Pages

This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed.
Find sources: "EN 10080" – news · newspapers · books · scholar · JSTOR (December 2022) (Learn how and when to remove this message)

The EN 10080: Steel for the reinforcement of concrete is a European Standard. This standard is referenced by EN 1992. This standard specifies general requirements and definitions for performance characteristics of steel reinforcement suitable for welding, which is used for reinforcement of concrete structures, supplied as finished products:

rods, coils (wire rod, wire) and unwound products;
reinforcement meshes automatically welded in factory conditions;
spatial scaffolds.

Steel conforming to this standard has a corrugated, periodically profiled or smooth surface. This standard does not apply to

Steel reinforcement not suitable for welding;
Zinc-plated steel bars;
Epoxy-coated steel bars;
Corrosion-resistant steel bars;
Prestressed steel bars;
Periodically profiled bars;
Further processing such as cutting or cutting and bending.

This standard does not define technical grades. The technical grades shall be determined in accordance with this standard according to the specified values for Re, Agt, Rm/Re, and Re,act/Re,nom (if applicable), fatigue strength (if applicable), flexibility, weldability, bending strength, welded or clamped joint strength (for welded reinforcement mesh or spatial frameworks) and dimensional tolerances.

v t e List of EN standards
EN standards	CEN/CENELEC Guide 6 CEN Workshop Agreement Datex II EN 3 EN 54 EN 71 EN 166 EN 206-1 EN 207 EN 301 549 EN 417 EN 590 EN 1063 EN 1078 EN 1090 EN 1991 EN 1992 EN 1993 EN 1994 EN 1995 EN 1996 EN 1997 EN 1998 EN 1999 EN 10025 EN 10027 EN 10034 EN 10080 EN 12255 EN 12566 EN 13402 EN 13432 EN 13445 EN 13537 EN 13757 EN 13940 EN 14214 EN 15038 EN 15838 EN 16034 EN 16114 EN 28601 EN 45554 EN 50022 EN 50075 EN 50090 EN 50102 EN 50155 EN 50436 EN 55011 EN 61000-3-2 EN 61000-4-5 EN 62061 EN 62262 Meter-Bus
Related	Eurocodes Keymark List of CEN technical committees

v t e Concrete
History	Ancient Roman architecture Roman architectural revolution Roman concrete Roman engineering Roman technology
Composition	Cement Calcium aluminate Energetically modified Portland Rosendale Water Water–cement ratio Aggregate Reinforcement Fly ash Ground granulated blast-furnace slag Silica fume Metakaolin
Production	Plant Concrete mixer Volumetric mixer Reversing drum mixer Slump test Flow table test Curing Concrete cover Cover meter Rebar
Construction	Precast Cast-in-place Formwork Climbing formwork Slip forming Screed Power screed Finisher Grinder Power trowel Pump Float Sealer Tremie
Science	Properties Durability Degradation Environmental impact Recycling Segregation Alkali–silica reaction
Types	AstroCrete Fiber-reinforced Filigree Foam Lunarcrete Mass Nanoconcrete Pervious Polished Polymer Prestressed Ready-mix Reinforced Roller-compacting Self-consolidating Self-leveling Sulfur Tabby Translucent Waste light Aerated AAC RAAC
Applications	Slab waffle hollow-core voided biaxial slab on grade Concrete block Step barrier Roads Columns Structures
Organizations	American Concrete Institute Concrete Society Institution of Structural Engineers Indian Concrete Institute Nanocem Portland Cement Association International Federation for Structural Concrete
Standards	Eurocode 2 EN 197-1 EN 206-1 EN 10080
See also	Hempcrete
Category:Concrete

References

"ENV 10080:1995". standards.iteh.ai. Retrieved 2022-11-25.
"Standard EN 10080 for fittings". baysideplumbingmelbourne.com. 10 March 2022. Retrieved 2022-11-25.
"Standards for reinforcement". concretecentre.com. Retrieved 2022-11-25.

This engineering-related article is a stub. You can help Misplaced Pages by expanding it.

Categories:

See also

References