This article has multiple issues. Please help improve it or discuss these issues on the talk page. (Learn how and when to remove these messages)
|
The Enterprise and Data Center Standard Form Factor (EDSFF), previously known as the Enterprise and Data Center SSD Form Factor, is a family of solid-state drive (SSD) form factors for use in data center servers.
Form factors
EDSFF was developed by the Small Form Factor Technology Affiliate technical work group, which is itself under the organizational stewardship of the Storage Networking Industry Association.
As a family of form factors, it defines specifications for the mechanical dimensions and electrical interfaces devices should have, to ensure compatibility between disparate hardware manufacturers. The standard is meant to replace the U.2 form factors for drives used in data centers. EDSFF provides a pure NVMe over PCIe interface. One common way to provide EDSFF connections on the motherboard is through MCIO connectors.
EDSFF SSDs come in four form factors: E1.L (Long) and E1.S (Short), which fit vertically in a 1u server, and E3.L and E3.S, which fit vertically in a 2u server. E3.S is approximately the size of an 2.5 inch (U.2) drive.
Samsung's NGSFF (also known as M.3 or NF1) form factor competes with EDSFF.
See also
References
- ^ Hands, Jonmichael. "EDSFF – A Dynamic Family of Form Factors for Data Center SSDs" (PDF).
- "SFF-TA-1008 Enterprise and Datacenter Device Form Factor (E3) 2.0". 6 November 2020. Retrieved 22 November 2021.
- "SSD Form Factors | SNIA". www.snia.org.
- "PCI-SIG Warns of Incompatibilities Between M.2 and Samsung's NGSFF/NF1".
External links
- Solid State Drive Form Factors on SNIA's website
- E1 and E3 EDSFF to Take Over from M.2 and 2.5 in SSDs
Solid-state drives | |||||
---|---|---|---|---|---|
Key terminology | |||||
Flash manufacturers | |||||
Controllers |
| ||||
SSD manufacturers | |||||
Interfaces |
| ||||
Configurations | |||||
Related organizations | |||||