Misplaced Pages

Fiber to the x (FTTX; also spelled "fibre") or fiber in the loop is a generic term for any broadband network architecture using optical fiber to provide all or part of the local loop used for last mile telecommunications. As fiber optic cables are able to carry much more data than copper cables, especially over long distances, copper telephone networks built in the 20th century are being replaced by fiber.

FTTX is a generalization for several configurations of fiber deployment, arranged into two groups: FTTP/FTTH/FTTB (fiber laid all the way to the premises/home/building) and FTTC/N (fiber laid to the cabinet/node, with copper wires completing the connection).

Residential areas already served by balanced pair distribution plant call for a trade-off between cost and capacity. The closer the fiber head, the higher the cost of construction and the higher the channel capacity. In places not served by metallic facilities, little cost is saved by not running fiber to the home.

Fiber to the x is the key method used to drive next-generation access (NGA), which describes a significant upgrade to the broadband available by making a step change in speed and quality of the service. This is typically thought of as asymmetrical with a download speed of 24 Mbit/s plus and a fast upload speed. Ofcom have defined super-fast broadband as "broadband products that provide a maximum download speed that is greater than 24 Mbit/s – this threshold is commonly considered to be the maximum speed that can be supported on current generation (copper-based) networks."

A similar network called a hybrid fiber-coaxial (HFC) network is used by cable television operators but is usually not synonymous with "fiber In the loop", although similar advanced services are provided by the HFC networks. Fixed wireless and mobile wireless technologies such as Wi-Fi, WiMAX and 3GPP Long Term Evolution (LTE) are an alternative for providing Internet access.

Definitions

The telecommunications industry differentiates between several distinct FTTX configurations. The terms in most widespread use today are:

• FTTE (fiber-to-the-edge) is a networking approach used in the enterprise building (hotels, convention centers, office buildings, hospitals, senior living communities, Multi-Dwelling Units, stadiums, etc.). Fiber reaches directly from the main distribution frame of a building out to the edge devices, eliminating the need for intermediate distribution frames.
• FTTP (fiber-to-the-premises): This term is used either as a blanket term for both FTTH and FTTB, or where the fiber network includes both homes and small businesses
  • FTTH (fiber-to-the-home): Fiber reaches the boundary of the living space, such as a box on the outside wall of a home. Passive optical networks and point-to-point Ethernet are architectures that are capable of delivering triple-play services over FTTH networks directly from an operator's central office. Typically providing between 1 and 10 Gbit/s
  • FTTB (fiber-to-the-building, -business, or -basement): Fiber reaches the boundary of the building, such as the basement in a multi-dwelling unit, with the final connection to the individual living space being made via alternative means, similar to the curb or pole technologies. It can currently reach symmetrical 2 Gbps with G.fast and 10G with Ethernet using some kind of copper wires.
  • FTTD can mean two different things:
    • (fiber-to-the-desktop or -desk): In an office, fiber connection is installed from the main computer room to a desk or fiber media converter near the user's desk
    • (fiber-to-the-door): Fiber reaches outside the flat
  • FTTR can mean three different things:
    • (fiber-to-the-radio): Fiber runs to the transceivers of base stations
    • (fiber-to-the-router): Fiber connection is installed from the router to the ISP's fiber network
    • (fiber-to-the-room): Fiber connection is extended from the router to each room in the home
  • FTTO (fiber-to-the-office): Fiber connection is installed from the main computer room/core switch to a special mini-switch (called FTTO Switch) located at the user's workstation or service points. This mini-switch provides Ethernet services to end user devices via standard twisted pair patch cords. The switches are decentralised and located all over the building, but managed from one central point
  • FTTF can mean five different things:
    • (fiber-to-the-factory): fiber runs to factory buildings
    • (fiber-to-the-farm): fiber runs to agricultural farms
    • (fiber-to-the-feeder): a synonym of FTTN
    • (fiber-to-the-floor): fiber reaches a junction box at a floor of a building
    • (fiber-to-the-frontage): This is very similar to FTTB. In a fiber to the front yard scenario, each fiber node serves a single subscriber. This allows for multi-gigabit speeds using XG-fast technology. The fiber node may be reverse-powered by the subscriber modem
  • FTTM can mean four different things:
    • (fiber-to-the-machine): In a factory, fiber runs to machines
    • (fiber-to-the-mast): Fiber runs to wireless masts
    • (fiber-to-the-mobile): Fiber runs to base stations
    • (fiber-to-the-multi-dwelling-unit): FTTP to apartment buildings
  • FTTT can mean three different things:
    • (fiber-to-the-terminal): In an office, fiber runs to desktop equipment
    • (fiber-to-the-tower): Fiber reaches base stations
    • (fiber-to-the-tent): For example, at hacker camps such as BornHack in Denmark.
  • FTTW (fiber-to-the-wall or -workgroup): In an office, fiber runs to small switches near a group of users
• FTTA can mean two different things:
  • (fiber-to-the-amplifier): Fiber runs to street cabinets
  • (fiber-to-the-antenna): Fiber runs up antenna towers
• FTTCS (fiber-to-the-cell-site): fiber reaches the base station site
• FTTE / FTTZ (fiber-to-the-telecom-enclosure or fiber-to-the-zone): is a form of structured cabling typically used in enterprise local area networks, where fiber is used to link the main computer equipment room to an enclosure close to the desk or workstation. FTTE and FTTZ are not considered part of the FTTX group of technologies, despite the similarity in name.
• FTTdp (fiber-to-the-distribution-point): This is very similar to FTTC / FTTN but is one-step closer again, moving the end of the fiber to within meters of the boundary of the customers premises in the last possible junction box, known as the "distribution point". This allows for near-gigabit speeds
• FTTL (fiber-to-the-loop): general term
• FTTN / FTTLA (fiber-to-the-node, -neighborhood, or -last-amplifier): Fiber is terminated in a street cabinet, possibly miles away from the customer premises, with the final connections being copper. FTTN is often an interim step toward full FTTH (fiber-to-the-home) and is typically used to deliver 'advanced' triple-play telecommunications services
• FTTC / FTTK (fiber-to-the-curb/kerb, -closet, or -cabinet): This is very similar to FTTN, but the street cabinet or pole is closer to the user's premises, typically within 300 m (1,000 ft), within range for high-bandwidth copper technologies such as wired Ethernet or IEEE 1901 power line networking and wireless Wi-Fi technology. FTTC is occasionally ambiguously called FTTP (fiber-to-the-pole), leading to confusion with the distinct fiber-to-the-premises system. Typically providing up to 100 Mbit/s
• FTTS can mean three different things:
  • (fiber-to-the-screen or -seat): On an airplane, fiber reaches the IFE screens
  • (fiber-to-the-street): The customer is connected using copper to the fiber passing near the building, up to 200 m (700 ft) away. This is a compromise between FTTB and FTTC. Typically providing up to 500 Mbit/s
  • (fiber-to-the-subscriber): This is a synonym for FTTP

To promote consistency, especially when comparing FTTH penetration rates between countries, the three FTTH Councils of Europe, North America, and Asia-Pacific agreed upon definitions for FTTH and FTTB in 2006, with an update in 2009, 2011 and another in 2015. The FTTH Councils do not have formal definitions for FTTC and FTTN.

Benefits

While fiber optic cables can carry data at high speeds over long distances, copper cables used in traditional telephone lines and ADSL cannot. For example, the common form of Gigabit Ethernet (1 Gbit/s) runs over relatively economical category 5e, category 6 or 6A unshielded twisted-pair copper cabling but only to 100 m (300 ft). However, 1 Gbit/s Ethernet over fiber can easily reach tens of kilometers. Therefore, FTTP has been selected by every major communications provider in the world to carry data over long 1 Gbit/s symmetrical connections directly to consumer homes. FTTP configurations that bring fiber directly into the building can offer the highest speeds since the remaining segments can use standard Ethernet or coaxial cable.

Fiber is often said to be "future-proof" because the data rate of the connection is usually limited by the terminal equipment rather than the fiber, permitting substantial speed improvements by equipment upgrades before the fiber itself must be upgraded. Still, the type and length of employed fibers chosen, e.g. multimode vs. single-mode, are critical for applicability for future connections of over 1 Gbit/s.

With the rising popularity of high-definition, on-demand video streaming applications and devices such as YouTube, Netflix, Roku, and Facebook LIVE, the demand for reliable bandwidth is crucial as more and more people begin to utilize these services.

FTTC (where fiber transitions to copper in a street cabinet) is generally too far from the users for standard Ethernet configurations over existing copper cabling. They generally use very-high-bit-rate digital subscriber line (VDSL) at downstream rates of 80 Mbit/s, but this falls extremely quickly when the distance exceeds 100 m (300 ft).

Fiber to the premises

Fiber to the premises (FTTP) is a form of fiber-optic communication delivery in which an optical fiber is run in an optical distribution network from the central office all the way to the premises occupied by the subscriber. The term "FTTP" has become ambiguous and may also refer to FTTC where the fiber terminates at a utility pole without reaching the premises.

Fiber to the premises can be categorized according to where the optical fiber ends:

• FTTH (fiber-to-the-home) is a form of fiber-optic communication delivery that reaches one living or working space. The fiber extends from the central office to the subscriber's living or working space. Once at the subscriber's living or working space, the signal may be conveyed throughout the space using any means, including twisted pair, coaxial cable, wireless, power line communication, or optical fiber.
• FTTB (fiber-to-the-building or -basement) is a form of fiber-optic communication delivery that necessarily applies only to those properties that contain multiple living or working spaces. The optical fiber terminates before actually reaching the subscribers living or working space itself, but does extend to the property containing that living or working space. The signal is conveyed the final distance using any non-optical means, including twisted pair, coaxial cable, wireless, or power line communication.

An apartment building may provide an example of the distinction between FTTH and FTTB. If a fiber is run to a panel inside each subscriber's apartment unit, it is FTTH. If instead, the fiber goes only as far as the apartment building's shared electrical room (either only to the ground floor or to each floor), it is FTTB.

Fiber to the curb/cabinet/node

Fiber to the curb/cabinet (FTTC) is a telecommunications system based on fiber-optic cables run to a platform that serves several customers. Each of these customers has a connection to this platform via coaxial cable or twisted pair. The "curb" is an abstraction and can just as easily mean a pole-mounted device or communications closet or shed. Typically any system terminating fiber within 300 m (1,000 ft) of the customer premises equipment would be described as FTTC.

Fiber to the node or neighborhood (FTTN), sometimes identified with and sometimes distinguished from fiber to the cabinet (FTTC), is a telecommunication architecture based on fiber-optic cables run to a cabinet serving a neighborhood. Customers typically connect to this cabinet using traditional coaxial cable or twisted pair wiring. The area served by the cabinet is usually less than one mile in radius and can contain several hundred customers.

FTTN allows delivery of broadband services such as high-speed internet. High-speed communications protocols such as broadband cable access (typically DOCSIS) or some form of digital subscriber line (DSL) are used between the cabinet and the customers. Data rates vary according to the exact protocol used and according to how close the customer is to the cabinet.

Unlike FTTP, FTTN often uses existing coaxial or twisted-pair infrastructure to provide last mile service and is thus less costly to deploy. In the long term, however, its bandwidth potential is limited relative to implementations that bring the fiber still closer to the subscriber.

A variant of this technique for cable television providers is used in a hybrid fiber-coaxial (HFC) system. It is sometimes given the acronym FTTLA (fiber-to-the-last-amplifier) when it replaces analog amplifiers up to the last one before the customer (or neighborhood of customers).

FTTC allows delivery of broadband services such as high-speed internet. Usually, existing wire is used with communications protocols such as broadband cable access (typically DOCSIS) or some form of DSL connecting the curb/cabinet and the customers. In these protocols, the data rates vary according to the exact protocol used and according to how close the customer is to the cabinet.

Where it is feasible to run new cable, both fiber and copper Ethernet are capable of connecting the "curb" with a full 100 Mbit/s or 1 Gbit/s connection. Even using relatively cheap outdoor category 5 copper over hundreds of meters, all Ethernet protocols including power over Ethernet (PoE) are supported. Most fixed wireless technologies rely on PoE, including Motorola Canopy, which has low-power radios capable of running on a 12 VDC power supply fed over several tens of meters of cable.

Power line networking deployments also rely on FTTC. Using the IEEE P1901 protocol (or its predecessor HomePlug AV) existing electric service cables move up to 1 Gbit/s from the curb/pole/cabinet into every AC electrical outlet in the home—coverage equivalent to a robust Wi-Fi implementation, with the added advantage of a single cable for power and data.

By avoiding new cable and its cost and liabilities, FTTC costs less to deploy. However, it also has historically had lower bandwidth potential than FTTP. In practice, the relative advantage of fiber depends on the bandwidth available for backhaul, usage-based billing restrictions that prevent full use of last-mile capabilities, and customer premises equipment and maintenance restrictions, and the cost of running fiber that can vary widely with geography and building type.

In the United States and Canada, the largest deployment of FTTC was carried out by BellSouth Telecommunications. With the acquisition of BellSouth by AT&T, deployment of FTTC will end. Future deployments will be based on either FTTN or FTTP. Existing FTTC plant may be removed and replaced with FTTP. Verizon, meanwhile, announced in March 2010 they were winding down Verizon FiOS expansion, concentrating on completing their network in areas that already had FiOS franchises but were not deploying to new areas, suggesting that FTTH was uneconomic beyond these areas.

Verizon also announced (at CES 2010) its entry into the smart home and power utility data management arenas, indicating it was considering using P1901-based FTTC or some other existing-wire approach to reach into homes, and access additional revenues from the secure AES-128 bandwidth required for advanced metering infrastructure. However, the largest 1 Gbit/s deployment in the United States, in Chattanooga, Tennessee, despite being conducted by power utility EPB, was FTTH rather than FTTC, reaching every subscriber in a 600-square-mile area. Monthly pricing of US$350 reflected this generally high cost of deployment. However, Chattanooga EPB has reduced the monthly pricing to US$70/month.

Historically, both telephone and cable companies avoided hybrid networks using several different modes of transport from their point of presence into customer premises. The increased competitive cost pressure, availability of three different existing wire solutions, smart grid deployment requirements (as in Chattanooga), and better hybrid networking tools (with major vendors like Alcatel-Lucent and Qualcomm Atheros, and Wi-Fi solutions for edge networks, IEEE 1905 and IEEE 802.21 protocol efforts and SNMP improvements) all make FTTC deployments more likely in areas uneconomic to serve with FTTP/FTTH. In effect FTTC serves as a halfway measure between fixed wireless and FTTH, with special advantages for smart appliances and electric vehicles that rely on PLC use already.

Deployments

Operators around the world have been rolling out high-speed Internet access networks since the mid-2000s. Some used a network topology known as Active Ethernet Point-to-Point to deliver services from its central office directly into subscribers' homes. Fiber termination was handled by a residential gateway provided by Advanced Digital Broadcast inside a subscriber's home to be shared with other consumer electronics (CE) devices.

Since 2007, Italian access providers Fastweb, Vodafone, and Wind participated in an initiative called Fiber for Italy, with the aim of creating a countrywide fiber-to-the-home network in Italy. The pilot taking place in the Italian capital, Rome, has seen symmetrical bandwidth of 100 Mbit/s. Telecom Italia, which refused to take part in the Fiber for Italy initiative, had an even more ambitious plan to bring fiber-to-the-home and fiber-to-the-business to 138 cities by 2018.

By the end of December 2010, the total number of fiber-to-the-home enabled homes had passed 2.5 million, with more than 348,000 subscribers.)

In September 2010, the European Commission published a new "Recommendation for Regulated Access to NGA Networks" along with a list of measures to promote the deployment of fast broadband and next-generation access networks.

Portugal Telecom plans to complete its fiber-to-the-home nationwide roll out by 2020. Currently 200 Mbit/s down, 100 Mbit/s up costs €22 per month.

Between September 2017 and March 2019, the number of European FTTH and FTTB subscribers increased by nearly 16%. By 2025, the total number of premises passed by FTTH and FTTB infrastructure is expected to reach 187 million throughout Europe.

Google Fiber provides speed of up to 8 Gbit/s.

Active Line Access is an evolving standard for the provision of services over FTTP networks in the United Kingdom proposed by the regulator Ofcom and developed by the Network Interoperability Consultative Committee.

FTTS, FTTH and FTTB

Most FTTH deployments follow one of four primary architecture types: centralized split, distributed split, star architecture, or daisy-chaining. Fiber network developers choose architectures based on a variety of factors, such as the physical geography of the local environment, number of anticipated subscribers, and labor force skill.

FTTN and FTTC

FTTN/C is seen as an interim step towards full FTTH and in many cases triple-play services delivered using this approach to provide up to around 100 Mbit/s have been proven to grow subscriber numbers and ARPU considerably FTTN/C is currently used by a number of operators, including AT&T in the United States, Germany's Deutsche Telekom, Greece's OTE, Swisscom, TIM in Italy, Proximus in Belgium, nbn™ in Australia, and Canadian operators Telus, Cogeco and Bell Canada.

Optical distribution networks

Direct fiber

The simplest optical distribution network architecture is direct fiber: each fiber leaving the central office goes to exactly one customer. These networks can support a lot of bandwidth, but they cost more because of the fiber and the equipment in the central office.

Direct fiber is generally favored by new entrants and competitive operators. A benefit is that no layer 2 networking technologies are excluded, whether passive optical network (PON), active optical network (AON), or other. Any form of regulatory remedy is possible using this topology.

Shared fiber

More commonly, each fiber leaving the central office is actually shared by many customers. It is not until such a fiber gets relatively close to the customers that it is split into individual customer-specific fibers. AONs and PONs both achieve this split.

Active optical network

AONs rely on electrically powered network equipment to distribute the signal, such as a switch or router. Normally, signals need an optical-electrical-optical transformation in the AON. Each signal leaving the central office is directed only to the customer for whom it is intended.

Incoming signals from the customers avoid colliding at the intersection because the powered equipment there provides buffering. Active Ethernet (a type of Ethernet in the first mile) is a common AON, which uses optical Ethernet switches to distribute the signal, incorporating the customers' premises and the central office into a large switched Ethernet network. Ethernet in the first mile deployments follow a point to point or star network topology and are often based on Fast Ethernet speeds of up to 100 Mbit/s.

Such networks are identical to Ethernet computer networks used in businesses and academic institutions, except that their purpose is to connect homes and buildings to a central office rather than to connect computers and printers within a location. Each switching cabinet can handle up to 1,000 customers, although 400–500 is more typical.

This neighborhood equipment performs layer 2 switching or layer 3 switching and routing, offloading full layer 3 routing to the carrier's central office. The IEEE 802.3ah standard enables service providers to deliver up to 1000 Mbit/s, full-duplex, over one single-mode optical fiber FTTP, depending on the provider.

Passive optical network

A passive optical network (PON) is a point-to-multipoint FTTP network architecture in which unpowered optical splitters are used to enable a single optical fiber to serve up to 128 customers. A PON reduces the fiber and central office equipment required compared with point-to-point architecture. Because of this, and because it needs no powered splitters or other active components from the moment it leaves the ISP's facilities until it reaches the customer, many ISPs prefer this technology.

The downstream signal coming from the central office is broadcast to each customer premises sharing a fiber. Encryption is used to prevent eavesdropping. Upstream signals are combined using a multiple-access protocol, usually time-division multiple access (TDMA).

Ethernet point-to-point

Point-to-Point Protocol over Ethernet (PPPoE) is a common way of delivering triple- and quad-play (voice, video, data, and mobile) services over both fiber and hybrid fiber-coaxial (HFC) networks. Active PPPoE uses dedicated fiber from an operator's central office all the way to the subscribers' homes, while hybrid networks (often FTTN) use it to transport data via fiber to an intermediate point to ensure sufficiently high throughput speeds over last-mile copper connections.

This approach has become increasingly popular in recent years with telecoms service providers in both North America (AT&T, Telus, for example) and Europe's Fastweb, Telecom Italia, Telekom Austria and Deutsche Telekom, for example. Google has also looked into this approach, amongst others, as a way to deliver multiple services over open-access networks in the United States.

Electrical network

Once on private property, the signal is typically converted into an electrical format.

The optical network terminal (ONT, an ITU-T term) or unit (ONU, an identical IEEE term) converts the optical signal into an electrical signal using thin film filter technology. These units require electrical power for their operation, so some providers connect them to backup batteries in case of power outages to ensure emergency access to telecommunications. The optical line terminations "range" the optical network terminals or units in order to provide TDMA time slot assignments for upstream communication.

For FTTH and for some forms of FTTB, it is common for the building's existing Ethernet, phone, and cable TV systems to connect directly to the optical network terminal or unit. If all three systems cannot directly reach the unit, it is possible to combine signals and transport them over a common medium such as Ethernet. Once closer to the end user, equipment such as a router or network interface controller can separate the signals and convert them into the appropriate protocol.

For FTTC and FTTN, the combined internet, video and telephone signal travels to the building over existing telephone or cable wiring until it reaches the end-user's living space, where a VDSL or DOCSIS modem converts data and video signals into Ethernet protocol, which is sent over the end-user's category 5 cable.

See also

• National broadband plan

References

1. "How Fiber Optics Work". https://computer.howstuffworks.com/fiber-optic4.htm. How Stuff Works. Retrieved 2 June 2020.
2. Mark Jackson (October 25, 2010), "The Definition of UK Superfast Next Generation Broadband", ISP Review, retrieved May 3, 2012
3. "Review of the wholesale local access market" (PDF). Ofcom.org.uk. June 1, 2010. Retrieved June 18, 2021.
4. Poulus, Tim (November 17, 2010). "FTTH networking: Active Ethernet versus Passive Optical Networking and point-to-point vs. point-to-multipoint". Telecompaper. Retrieved July 12, 2013.
5. Ed Gubbins, "Active Ethernet grows in PON's shadow" Archived 2011-10-01 at the Wayback Machine, NXTcomm Daily News, Penton Media, 13 May 2008. Retrieved 12 July 2013
6. Coomans, Werner; Moraes, Rodrigo B.; Hooghe, Koen; Duque, Alex; Galaro, Joe; Timmers, Michael; Van Wijngaarden, Adriaan J.; Guenach, Mamoun; Maes, Jochen (2015). "XG-fast: the 5th generation broadband". IEEE Communications Magazine. 53 (12). IEEE Xplore: 83–88. doi:10.1109/MCOM.2015.7355589. S2CID 33169617.
7. "BornHack Event Network Information". Retrieved July 8, 2024.
8. Robert Reid, "All multimode fiber is not created equal", Cabling Installation & Maintenance, PennWell Corporation, February 2007, retrieved 12 July 2013
9. Heath, Nick (September 26, 2014). "Could ultrafast broadband over copper speed the rollout of gigabit internet?". TechRepublic. Archived from the original on July 22, 2015. Retrieved September 26, 2014.
10. "FTTH Council – Definition of Terms" (PDF). FTTH Council. August 11, 2006. Retrieved September 1, 2011.
11. "FTTH Council – Definition of Terms" (PDF). FTTH Council. January 9, 2009. Archived from the original (PDF) on June 3, 2015. Retrieved June 22, 2015.
12. ^ "FTTH Council – Definition of Terms" (PDF). FTTH Council. September 2011. Archived from the original (PDF) on October 8, 2013. Retrieved June 27, 2013.
13. "FTTH Council – Definition of Terms" (PDF). FTTH Council. February 2016. Archived from the original (PDF) on June 22, 2015. Retrieved June 22, 2015.
14. "FTTx". OFS Optics. Retrieved July 17, 2017.
15. McCullough, Don (August 2005), "Flexibility is key to successful fiber to the premises deployments" Archived 2011-10-09 at the Wayback Machine, Lightwave 22 (8). Retrieved on 2010-01-27.
16. da Silva, Henrique (March 2005), "Optical Access Networks" Archived March 4, 2016, at the Wayback Machine, Instituto de Telecomunicações, 9 March 2005, slide 10. Retrieved on 2007-03-25.
17. Ed Gubbins, "Analyst: AT&T may replace some FTTC with FTTP", Connected Planet, Penton Media, Inc., 21 December 2007
18. Svensson, Peter (March 26, 2010). /industries/telecom/2010-03-26-verizon-fios_N.htm/ "Verizon winds down expensive Fios expansion". USA Today. Associated Press. Archived from the original on January 11, 2012. Retrieved August 12, 2024. {{cite news}}: Check |archive-url= value (help)
19. EPB, website of a non-profit agency of the City of Chattanooga, established in 1935 to provide electric power to the greater Chattanooga area. Retrieved 12 July 2013.
20. EPBFI, a website for EPB Fiber Optics. Retrieved 3 June 2014.
21. Enrico Pietralunga (March 23, 2009). "Fastweb FTTH: A 10-years success story" (PDF). Konferenzbeitraege Berlin presentation. Fastweb. Archived from the original (PDF) on October 9, 2011. Retrieved May 3, 2012.
22. "FTTH with the Optical Distribution Frame". Connections. Reichle & De-Massari AG. March 17, 2011. Archived from the original on March 28, 2012. Retrieved May 3, 2012.
23. ^ Sean Buckley (January 17, 2011). "Italy: FTTH reaches 348,000 subscriber mark". Fierce Telecom. Retrieved May 3, 2012.
24. "Digital Agenda: Commission outlines measures to deliver fast and ultra-fast broadband in Europe". Europe's Information Society. September 20, 2010. Archived from the original on November 3, 2012. Retrieved May 3, 2012.
25. "Net + Telefone – Fibra". MEO. Archived from the original on June 27, 2018. Retrieved June 26, 2018.
26. "Press Release" (PDF). Fibre to the Home Council Europe. March 14, 2019. Archived from the original (PDF) on July 31, 2020. Retrieved June 2, 2020.
27. "Google Fiber | Gigabit Fiber Optic Internet". fiber.google.com. Retrieved December 31, 2023.
28. "VLAN standard could extend broadband reach to poorest". Computing. March 26, 2010.
29. "Choosing The Right FTTH Architecture For Your Network". OSPInsight. Retrieved August 13, 2021.
30. "Facts and Figures 2010" Archived 2012-07-08 at archive.today, Annual Report, Telekom / Austria Group. Retrieved 12 July 2013.
31. "Telecommunication Market Trends", 2010 Annual Report, Swisscom, page 22. Retrieved 12 July 2013.
32. "Best-Ever Mobile Broadband Sales and Strong Cash Flows Highlight AT&T's Fourth-Quarter Results; Stock Buyback Begins on Previous 300 Million Share Authorization" Archived September 11, 2012, at the Wayback Machine, News Release, AT&T, 26 January 2012
33. Dieter Elixmann, et al., "The Economics of Next Generation Access-Final Report: Study for the European Competitive Telecommunication Association (ECTA)", WIK-Consult GmbH, 10 September 2008. Retrieved 12 July 2012.
34. Rudolf van der Berg, "Developments in Fiber Technologies and Investment", Working Party on Communication Infrastructures and Services Policy (CISP), Committee for Information, Computer and Communication Policy (ICCP), Directorate for Science, Technology and Industry (DSTI), Organisation for Economic Co-operation and Development (OECD), 3 April 2008. Retrieved 12 July 2013.
35. Wang, K.; Mas Machuca, C.; Wosinska, L.; Urban, P. J.; Gavler, A.; Brunnström, K.; Chen, J. (2017). "Techno-Economic Analysis of Active Optical Network Migration Toward Next-Generation Optical Access". Journal of Optical Communications and Networking. 9 (4): 327. doi:10.1364/JOCN.9.000327. S2CID 18604241.
36. "Fundamentals" (PDF). jm.telecoms.free.fr. Retrieved April 4, 2023.
37. Stephen Hardy, "Is Active Ethernet best FTTH option for Google?" Archived December 28, 2011, at the Wayback Machine, Lightwave, PennWell Corporation, 24 February 2010

External links

• Fiber to the Home Council: Asia-Pacific
• Fibre to the Home Council: Europe
• Fiber to the Home Council: North America
• Fiber to the Home Council: Latin America Chapter Archived December 5, 2013, at the Wayback Machine

• Broadband
• Network architecture
• Fiber-optic communications
• Local loop
• Telephony
• Fiber to the premises