 | This article has multiple issues. Please help improve it or discuss these issues on the talk page. (Learn how and when to remove these messages)
|
Ferrofluidic is the brand name of a staged magnetic liquid rotary sealing mechanism made by the Ferrotec Corporation. Ferrofluidic seals, also known as magnetic liquid rotary seals, are employed in various rotating equipment to facilitate rotary motion while ensuring a hermetic seal. This is achieved through a physical barrier constituted by a ferrofluid, which is held in position by a permanent magnet. Developed in the 1970s, ferrofluidic seals have been utilized in various specialized applications, including computer disk drives, vacuum systems, and nuclear technologies.
Origins
Ferrofluidic seals rely on the general principle of ferrofluids - fluids that display magnetic attraction. Following research on ferrofluids during the 1960s, the ferrofluidic seal was first patented in 1971 by R.E. Rosensweig (USP 3,620,584), who subsequently founded Ferrofluidics Corporation with R. Moskowitz.
Benefits and limitations
Magnetic liquid rotary seals operate with little maintenance and minimal leakage in a range of applications. Ferrofluid-based seals used in industrial and scientific applications are most often packaged in mechanical seal assemblies called rotary feed-throughs, which also contain a central shaft, ball bearings, and outer housing. The ball bearings provide two functions: maintaining the shaft's centering within the seal gap and supporting external loads. The bearings are the only mechanical wear items, as the dynamic seal is formed with a series of rings of ultra-low vapor pressure, oil-based liquid, held magnetically between the rotor and stator. As the ferrofluid retains its liquid properties even when magnetized, drag torque is very low. With the use of permanent magnets, the operating life and equipment maintenance cycles are generally very long. Ferrofluid-sealed feed-throughs reach their greatest performance levels by optimizing features such as ferrofluid Viscosity and magnetic strength, magnet and steel materials, bearing arrangements, and using water cooling for applications with extremely high speeds or temperatures. Ferrofluid-sealed feedthroughs can operate in environments including ultra-high vacuum (below 10 mbar), temperatures over 1,000 °C, tens of thousands of RPM, and multiple-atmosphere pressures.
Magnetic liquid seals can be engineered for a range of applications and exposure, but are generally limited to sealing gases and vapors, not direct pressurized liquid. This is due to premature failure of the ferrofluid seal when it seals a liquid. In 2020, research was underway to try and solve this problem.
Each particular combination of construction materials and design features has practical limits concerning temperature, differential pressure, speed, applied loads, and operating environment, and as such devices must be designed to meet the criteria for their applications. Necessary features may include multiple ferrofluid stages, water cooling, customized materials, permanent magnets, and exotic bearings. Ferrofluid-based seals have extremely low leak rates however they cannot reach the levels of welded connections or other all-metal, static (non-rotating) seals.
References
- ^ Moskowitz, Ronald; Ezekiel, Frederick D. (1975-02-01). "Non-Wearing Ferrofluidic Seals". SAE Technical Paper Series. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International. doi:10.4271/750851.
{{cite journal}}: CS1 maint: location (link) - "About Us". FerroTec. Retrieved 2023-06-06.
- van der Wal, Karoen; van Ostayen, Ron A.J.; Lampaert, Stefan G.E. (October 2020). "Ferrofluid rotary seal with replenishment system for sealing liquids". Tribology International. 150: 106372. doi:10.1016/j.triboint.2020.106372.