Misplaced Pages

Garland Mill

Article snapshot taken from Wikipedia with creative commons attribution-sharealike license. Give it a read and then ask your questions in the chat. We can research this topic together.
United States historic place
Garland Mill
U.S. National Register of Historic Places
Garland Mill is located in New HampshireGarland MillShow map of New HampshireGarland Mill is located in the United StatesGarland MillShow map of the United States
LocationGarland Rd., Lancaster, New Hampshire
Coordinates44°28′24″N 71°28′50″W / 44.47333°N 71.48056°W / 44.47333; -71.48056
Area5 acres (2.0 ha)
NRHP reference No.82000616
Added to NRHPNovember 12, 1982

The Garland Mill is a historic sawmill on Garland Road in Lancaster, New Hampshire. Built about 1860, and repeatedly modified to adapt to growth and new technology, it is the only water-powered sawmill (a once-common sight) in the state. The property was listed on the National Register of Historic Places in 1982.

Description and history

The Garland Mill stands in a rural upland area of eastern Lancaster, on the west side of Garland Road at its junction with Pleasant Valley Road. The property is bisected by Garland Brook, which provides the mill's power. The mill is set astride the stream, separated from the main road by the mill pond and wooded area. A wooden crib dam with rock fill provides a drop of about 16 feet (4.9 m) at the eastern end of the building. The main mill is a broad single-story timber-framed structure. The interior is one large chamber, with large entrances on the north and south sides to facilitate the entry of logs and the exit of sawn lumber. A wooden penstock brings water to a turbine, from which a series of leather belts deliver power from the main shaft to the saws.

The mill was built in 1860 by Eben Crocket Garland, and was a relatively successful small mill operation. It grew in the subsequent decades, its growth spurred by the arrival of railroad service to Lancaster. In 1870, it was one of 640 sawmills in the state. The mill was sold by Garland's son in 1888. It is now roughly three times the size of its original construction, and kept pace with technological changes through the mid-20th century, updating its turbines when more efficient ones became available.

The building was listed on the National Register of Historic Places in 1982. At the time of its listing it was still in operation as the only water-powered sawmill in the state.

See also

References

  1. ^ "National Register Information System". National Register of Historic Places. National Park Service. March 13, 2009.
  2. ^ "NRHP nomination for Garland Mill". National Park Service. Retrieved 2014-03-25.
National Register of Historic Places in Coös County, New Hampshire
National Historic
Landmark
Coös County map
Historic districts
Historic properties
Footnotes‡This historic property also has portions in an adjacent state.
See also: National Register of Historic Places listings in Coös County, New Hampshire and List of National Historic Landmarks in New Hampshire
Categories: