Misplaced Pages

Gitana (yacht)

Article snapshot taken from Wikipedia with creative commons attribution-sharealike license. Give it a read and then ask your questions in the chat. We can research this topic together.
1936 yacht

Gitana is a classic yacht built in 1936 after plans of American Naval Architect John Alden.

Gitana at anchor in Maine

Design and build

Gitana was built by Nunes Bros Shipbuilders in Sausalito, California for Richard Danforth, an American civil engineer and inventor of a popular, patented lightweight anchor.

Originally drawn as a Bermuda rigged sloop, John Alden's design number 630 represents the architects modern type, in contrast to his successful series of gaff-rigged schooners.

With a displacement of 26000lbs at a hull length of 40 and beam of 10 feet, Gitana was, at the time, a relatively moderate displacement vessel. Hull construction is 5/4 inch Mahogany carvel planking over white oak centerline and steam-bent frames. All fixed ballast is external.

History

After campaigning Gitana in San Francisco and West Coast races including the 1947 transpacific race, Danforth relocated the boat to the Maine coast where she was converted for cruising with the addition of a mizzen mast and sail. In 1961, the boat was acquired by Coast Guard Captain Ernest Burt Jr of Annapolis. In 2014, the ship was acquired and is now privately owned and berthed in New Rochelle, New York. It was listed on the National Register of Historic Places in 2024.

An annual boat race in Maine is named after Gitana.

Measurements

  • LOD 39' 9"
  • Beam 10' 4"
  • LWL 30' 3"
  • Draft 6'

References

  1. "Looking Back: The Bermuda Race's Schooner Era (1907-1932) - Newport Bermuda Race". bermudarace.com. Retrieved October 24, 2023.
  2. "1947 Transpac Race Results" (PDF). transpacyc.com. Retrieved October 24, 2023.
  3. "Cup Races & Awards". Kollegewidgwok Yacht Club. Retrieved October 24, 2023.
Categories: