HG 85 fragmentation grenade | |
---|---|
Type | Hand grenade |
Place of origin | Switzerland |
Service history | |
Used by | Netherlands, Switzerland, United Kingdom |
Production history | |
Designer | Munitionsfabrik Altdorf, today RUAG |
Designed | 1985 |
Produced | 1985–present |
Specifications | |
Mass | 465 g (16.4 oz) |
Length | 97 mm (3.8 in) |
Diameter | 65 mm (2.6 in) |
Filling | RDX / TNT (55/45%) |
Filling weight | 155 g (5.5 oz) |
Detonation mechanism | Time Fuse |
The HG 85 (Hand Granate M1985) is a round fragmentation hand grenade designed for the Swiss Armed Forces, and is still produced by RUAG Ammotec in Switzerland. HG 85 is the internal designation of the Swiss Army and replaced the HG 43 from World War II.
On detonation, the steel body containing 155 g (5.5 oz) of TNT releases around 1,800 fragments, weighing on average 0.1 g (0.0035 oz). UK grenade range safety data suggests the L109 (see-Variants ) and by extension all live versions – may represent a danger at ranges up to 200 m (220 yd). It is primarily intended for use during fighting in built-up areas, trench clearing, and wood clearing. It is effective against unprotected personnel up to 10 m (33 ft) away, and protected personnel up to 5 m (16 ft).
The design of the grenade was made by the federal Munitionsfabrik Altdorf (MF+A) which became SM Schweizerische Munitionsfabrik and later RUAG Ammotech. The initial detonator was supplied by Diehl (Germany) and later on manufactured under licence in Switzerland. The explosive was supplied from Germany.
Function
The grenade is spherical with a bushing on the top threaded internally to accept the DM 82 CH fuze mechanism. Due to its specially constructed fuze and packaging, the grenade is considered very secure. It is designed to be effective against opponents wearing body armor, up to 20 layers of Kevlar and 1.6 mm (0.063 in) of titanium.
A supplementary spring steel safety clip is clipped over the safety lever and bushing on top of the grenade preventing the safety lever from moving.
Variants
EUHG 85
In the Swiss Army there is a training hand grenade with nearly the same size TNT charge (120–155 g (4.2–5.5 oz)), but no shrapnel mantle. It is designated EUHG 85 for Explosiv-Übungshandgranate (explosive training hand grenade). They are the same size, shape and weight, made up by adding iron powder, as the HG 85, and painted a coarse black. They are stamped "EXPLOSIV". They function in the same way as the HG 85. Due to the substantial explosive charge they are dangerous. The grenade housing, especially the fuze block, causes some fragmentation.
Mark HG 85
Initial training in the Swiss Army is done with a Markier Handgranate 85. It is equal in size and shape to the HG 85, but contains no explosive charge. A small bang charge can be inserted by unscrewing the upper part (where the fuze and lever are). Releasing the lever ("spoon") activates a striker that fires the charge to produce a bang. This is used for training purposes especially when there is OpFor to simulate an explosion but not endanger anyone. The Mark HG 85 can be recovered and reloaded with another banger.
Manip HG 85
The Manip HG (for manipulation) is used for learning the basic movements and practicing throwing hand grenades in the Swiss Army. It is the same size and shape as a real HG 85, but with no moving parts. It is produced as a solid polymer block and painted bright orange, for easy recovery in the field. The first picture link below shows both Manip and EUHG 85.
L109A1
In September 2000, a six-year contract with Swiss Ammunition Enterprise Corporation (a RUAG subsidiary) was announced, committing the UK to purchase around 363,000 grenades for combat and live training, first deliveries scheduled for March 2001.
The L109 is the British designation for the HG 85. It differs from the HG 85 in that it has a special safety clip (matte black in color, which is similar to the safety clip on the American M67 grenade.
The L109 is deep bronze green in color with golden yellow stenciling, and a rough exterior comparable to light sandpaper, and a yellow band around the top bushing, and weighs 465 g (16.4 oz). Markings give the designation "GREN HAND HE L109A1", a manufacturer marking "SM" meaning "Swiss Munitions", and a lot number. (Markings on the safety lever give the designation and lot number of the fuze.)
Once the safety pin is pulled the grenade is armed, but so long as the fly-off lever is kept depressed while the grenade is held (and the grenade can be held indefinitely with the pin out) it can be safely returned to storage so long as the fly-off safety lever is still in the closed position and the safety pin reinserted. However, if thrown – or the lever allowed to rise – the protective plastic cover falls away and the striker, under pressure of the striker spring, begins to rotate on its axis. This causes the safety lever to be thrown clear, the striker continues to rotate until it hits the percussion cap, which fires and ignites the delay pellet. The heat of the burning delay pellet melts solder holding a retaining ring, allowing the detonator to move under the influence of a spring from the safe to armed position. The delay pellet continues to burn and after between 3 and 4 seconds burns out and produces a flash that forces aside a flap valve allowing ignition. When the flash reaches the detonator this initiates a booster charge which in turn initiates the main explosive filling.
L110A1
The L110 (Drill Grenade) is an entirely inert (no explosive content) version of the L109.
Identical in size, weight and shape, as the live grenade and is used for training purposes, specifically correct handling and throwing. It can be easily distinguished from the live grenade as it is dark blue with white markings (see below).
The body is solid aluminum with a textured plastic coating made in the same form as the live grenade, the textured coating ensuring a good gripping surface. A hole drilled up from the bottom indicates an empty store as well as ensuring the drill grenade is of the same weight as a live grenade. A bushing on top of the grenade has a dummy fuze mechanism permanently attached with a slot for the pull ring to clip into to prevent it being accidentally pulled. The fuze mechanism, under the plastic cover is very similar in appearance to the American fuze mechanisms. Internally there is an extension on the striker to allow it to be re-cocked during training and there is a leaf spring safety that clips around the safety lever and neck of the grenade preventing the lever from rotating even if the safety pin is pulled.
The markings are 'GREN HAND INERT DRILL L110A1' and a manufacturers marking "SM" meaning Swiss Munitions. The fuze mechanism is marked on the wide bottom portion of the lever "HG2 DM 82 CH".
L111A1
This practice grenade has a small simulation charge (flash/bang) that imitates a live grenade for training purposes. It is distinguishable from the wholly inert L110 by being a much lighter blue and is fitted with a distinctive gold/orange plastic cap and safety lever.
The body of the L111A1 is made of steel, is covered in a textured plastic material and has the word 'PRACTICE' embossed near the top of the body, near a top portion which is larger than the bushing on the live grenade. Like the L110 there is a large aperture in the bottom of the grenade which demonstrates it is not a live grenade, but in the L111A this aperture allow gas from the practice fuse to escape. Consisting of two parts, a grey reusable striker mechanism and an L162 practice fuse (which has a blue body with a brown base and is fitted with a silver washer) the practice fuse is fitted into the bottom of the reusable striker mechanism then the entire assembly is screwed into the top of the grenade. In this version the safety lever is attached by a plastic strap to prevent loss, the entire unit, apart from the expended L162 practice fuse, being reused.
Markings, again in white, include 'GREN HAND PRAC L111A1', a manufacturers mark 'SM' meaning Swiss Munitions, and a lot number.
Nr300
The Nr300 is the Dutch designation for the HG 85. It is exactly like the L109. There is also the Nr330.
OHG92
Offensive grenade, painted black with a yellow band around the neck. OHG92's were produced for export only. It solely relies on its explosive power, and doesn't have a steel fragmentation liner. For this reason, it has no armour piercing capability.
Users
This section's tone or style may not reflect the encyclopedic tone used on Misplaced Pages. See Misplaced Pages's guide to writing better articles for suggestions. (March 2023) (Learn how and when to remove this message) |
The HG 85 entered service in the Swiss Army in 1985. It is also used in some other European armies and also in the Middle and Far East.
- Switzerland
- Handgranate 85 (HG 85) / Grenade à main 85 (gren main 85) / granata a mano 85 (gran mano 85) : fragmentation, 1,500,000 ordered in 1985
- Explosiv-Übungshandgranate 85 (EUGH 85) / grenade à main d’exercice explosive 85 (gren main ex exp 85) : training, manipulation, full blast
- Explosiv-Übungshandgranate 11 (EUHG 11) / grenade à main d’exercice explosive 11 (gren main ex exp 11)
- Markier-Handgranate 85 (Mark HG 85) / grenade à main de marquage 85 (gren main 85 marq) with explosive cartridge (Knallpatrone / cartouche détonante : training, manipulation, small charge
- Wurfkörper-Handgranate 85 (WurfK HG 85) / corps de lancement grenade à main 85 (lanc gren main 85) : training, throwing practice, inert, 100,000 ordered in 1985
- United Kingdom
- GREN HAND HE L109A1 (hand grenade)
- GREN HAND INERT DRILL L110A1 (inert drill hand grenade)
- GREN HAND PRAC L111A1 (practice hand grenade)
- Netherlands
- Nr300
- Nr330
- United Arab Emirates
- 225,162 grenades sent to the UAE in 2003 Some of these weapons were found with ISIS soldiers in Syria, as well as rebels in Yemen despite a re-export ban signed by the UAE.
References
- ^ "OrData - Data Details". Archived from the original on 2012-12-11. Retrieved 2009-08-17.
- "CHAPTER 22: GRENADE RANGES", JSP 403 (PDF), vol. 2 (3 ed.), Ministry of Defence and Defence Safety Authority
- "Message concernant l'acquisition de matériel d'armement (Programme d'armement de 1985) du 29 mai 1985". www.fedlex.admin.ch (in French) (published July 2, 1985). May 29, 1985. p. 9. Retrieved 2024-05-02.
- "DM 82 CH fuze mechanism". RUAG. Archived from the original on 2016-03-06. Retrieved 2016-03-02.
- "British Data Sheets L109A1". Shaw Communications. Archived from the original on 2011-01-13.
- "Swiss Army hand grenade manual "Die Handgranate 85 (HG 85)", Reglement 53.107 d". 15 February 1995.
- ^ "L109A1". Shaw Communications. Archived from the original on 2016-01-03.
- "L110". Shaw Communications. Archived from the original on 2004-12-27.
- "L111A1". Shaw Communications. Archived from the original on 2003-02-27.
- Koninklijke Landmacht (1 February 1999). Voorschrift 7-827, 5e druk, Handgranaten.
- "HG 85 (Handgranate 85)". Retrieved 4 February 2020.
- "RUAG HG 85". Weaponsystems.net. Retrieved 2023-11-24.
- ^ https://www.fedlex.admin.ch/eli/fga/1985/2__213_/fr Page 10
- Abas, Marhalim (2023-10-31). "More Hand Grenades for The Army". Malaysian Defence. Retrieved 2023-11-24.
- "Swiss-made grenades used in Turkish attack". SWI swissinfo.ch. 2016-07-31. Retrieved 2023-11-24.
- "Federal Council acknowledges inquiries concerning Swiss hand grenades allegedly used in Syria". www.seco.admin.ch. Retrieved 2023-11-24.