Misplaced Pages

Harmonic series (music)

Article snapshot taken from Wikipedia with creative commons attribution-sharealike license. Give it a read and then ask your questions in the chat. We can research this topic together.
(Redirected from Harmonic (music)) Sequence of frequencies
Harmonics of a string showing the periods of the pure-tone harmonics (period = 1/frequency)

The harmonic series (also overtone series) is the sequence of harmonics, musical tones, or pure tones whose frequency is an integer multiple of a fundamental frequency.

Pitched musical instruments are often based on an acoustic resonator such as a string or a column of air, which oscillates at numerous modes simultaneously. As waves travel in both directions along the string or air column, they reinforce and cancel one another to form standing waves. Interaction with the surrounding air produces audible sound waves, which travel away from the instrument. These frequencies are generally integer multiples, or harmonics, of the fundamental and such multiples form the harmonic series.

The fundamental, which is usually perceived as the lowest partial present, is generally perceived as the pitch of a musical tone. The musical timbre of a steady tone from such an instrument is strongly affected by the relative strength of each harmonic.

Terminology

Partial, harmonic, fundamental, inharmonicity, and overtone

A "complex tone" (the sound of a note with a timbre particular to the instrument playing the note) "can be described as a combination of many simple periodic waves (i.e., sine waves) or partials, each with its own frequency of vibration, amplitude, and phase". (See also, Fourier analysis.)

A partial is any of the sine waves (or "simple tones", as Ellis calls them when translating Helmholtz) of which a complex tone is composed, not necessarily with an integer multiple of the lowest harmonic.

A harmonic is any member of the harmonic series, an ideal set of frequencies that are positive integer multiples of a common fundamental frequency. The fundamental is a harmonic because it is one times itself. A harmonic partial is any real partial component of a complex tone that matches (or nearly matches) an ideal harmonic.

An inharmonic partial is any partial that does not match an ideal harmonic. Inharmonicity is a measure of the deviation of a partial from the closest ideal harmonic, typically measured in cents for each partial.

Many pitched acoustic instruments are designed to have partials that are close to being whole-number ratios with very low inharmonicity; therefore, in music theory, and in instrument design, it is convenient, although not strictly accurate, to speak of the partials in those instruments' sounds as "harmonics", even though they may have some degree of inharmonicity. The piano, one of the most important instruments of western tradition, contains a certain degree of inharmonicity among the frequencies generated by each string. Other pitched instruments, especially certain percussion instruments, such as marimba, vibraphone, tubular bells, timpani, and singing bowls contain mostly inharmonic partials, yet may give the ear a good sense of pitch because of a few strong partials that resemble harmonics. Unpitched, or indefinite-pitched instruments, such as cymbals and tam-tams make sounds (produce spectra) that are rich in inharmonic partials and may give no impression of implying any particular pitch.

An overtone is any partial above the lowest partial. The term overtone does not imply harmonicity or inharmonicity and has no other special meaning other than to exclude the fundamental. It is mostly the relative strength of the different overtones that give an instrument its particular timbre, tone color, or character. When writing or speaking of overtones and partials numerically, care must be taken to designate each correctly to avoid any confusion of one for the other, so the second overtone may not be the third partial, because it is the second sound in a series.

Some electronic instruments, such as synthesizers, can play a pure frequency with no overtones (a sine wave). Synthesizers can also combine pure frequencies into more complex tones, such as to simulate other instruments. Certain flutes and ocarinas are very nearly without overtones.

Frequencies, wavelengths, and musical intervals in example systems

Even-numbered string harmonics from 2nd up to the 64th (five octaves)

One of the simplest cases to visualise is a vibrating string, as in the illustration; the string has fixed points at each end, and each harmonic mode divides it into an integer number (1, 2, 3, 4, etc.) of equal-sized sections resonating at increasingly higher frequencies. Similar arguments apply to vibrating air columns in wind instruments (for example, "the French horn was originally a valveless instrument that could play only the notes of the harmonic series"), although these are complicated by having the possibility of anti-nodes (that is, the air column is closed at one end and open at the other), conical as opposed to cylindrical bores, or end-openings that run the gamut from no flare, cone flare, or exponentially shaped flares (such as in various bells).

In most pitched musical instruments, the fundamental (first harmonic) is accompanied by other, higher-frequency harmonics. Thus shorter-wavelength, higher-frequency waves occur with varying prominence and give each instrument its characteristic tone quality. The fact that a string is fixed at each end means that the longest allowed wavelength on the string (which gives the fundamental frequency) is twice the length of the string (one round trip, with a half cycle fitting between the nodes at the two ends). Other allowed wavelengths are reciprocal multiples (e.g. 1⁄2, 1⁄3, 1⁄4 times) that of the fundamental.

Theoretically, these shorter wavelengths correspond to vibrations at frequencies that are integer multiples of (e.g. 2, 3, 4 times) the fundamental frequency. Physical characteristics of the vibrating medium and/or the resonator it vibrates against often alter these frequencies. (See inharmonicity and stretched tuning for alterations specific to wire-stringed instruments and certain electric pianos.) However, those alterations are small, and except for precise, highly specialized tuning, it is reasonable to think of the frequencies of the harmonic series as integer multiples of the fundamental frequency.

The harmonic series is an arithmetic progression (f, 2f, 3f, 4f, 5f, ...). In terms of frequency (measured in cycles per second, or hertz, where f is the fundamental frequency), the difference between consecutive harmonics is therefore constant and equal to the fundamental. But because human ears respond to sound nonlinearly, higher harmonics are perceived as "closer together" than lower ones. On the other hand, the octave series is a geometric progression (2f, 4f, 8f, 16f, ...), and people perceive these distances as "the same" in the sense of musical interval. In terms of what one hears, each successively higher octave in the harmonic series is divided into increasingly "smaller" and more numerous intervals.

The second harmonic, whose frequency is twice the fundamental, sounds an octave higher; the third harmonic, three times the frequency of the fundamental, sounds a perfect fifth above the second harmonic. The fourth harmonic vibrates at four times the frequency of the fundamental and sounds a perfect fourth above the third harmonic (two octaves above the fundamental). Double the harmonic number means double the frequency (which sounds an octave higher).

An illustration in musical notation of the harmonic series (on C) up to the 20th harmonic. The numbers above the harmonic indicate the difference – in cents – from equal temperament (rounded to the nearest integer). Blue notes are very flat and red notes are very sharp. Listeners accustomed to more tonal tuning, such as meantone and well temperaments, notice many other notes are "off".
Harmonics on C, from 1st (fundamental) to 32nd harmonic (five octaves higher). Notation used is based on the extended just notation by Ben Johnston
Harmonic series as musical notation with intervals between harmonics labeled. Blue notes differ most significantly from equal temperament. One can listen to A2 (110 Hz) and 15 of its partials
Staff notation of partials 1, 3, 5, 7, 11, 13, 17, and 19 on C. These are "prime harmonics".

Marin Mersenne wrote: "The order of the Consonances is natural, and ... the way we count them, starting from unity up to the number six and beyond is founded in nature." However, to quote Carl Dahlhaus, "the interval-distance of the natural-tone-row , counting up to 20, includes everything from the octave to the quarter tone, (and) useful and useless musical tones. The natural-tone-row justifies everything, that means, nothing."

Harmonics and tuning

If the harmonics are octave displaced and compressed into the span of one octave, some of them are approximated by the notes of what the West has adopted as the chromatic scale based on the fundamental tone. The Western chromatic scale has been modified into twelve equal semitones, which is slightly out of tune with many of the harmonics, especially the 7th, 11th, and 13th harmonics. In the late 1930s, composer Paul Hindemith ranked musical intervals according to their relative dissonance based on these and similar harmonic relationships.

Below is a comparison between the first 31 harmonics and the intervals of 12-tone equal temperament (12TET), octave displaced and compressed into the span of one octave. Tinted fields highlight differences greater than 5 cents (1⁄20 of a semitone), which is the human ear's "just noticeable difference" for notes played one after the other (smaller differences are noticeable with notes played simultaneously).

Harmonic Interval as a ratio Interval in binary 12TET interval Note Variance cents
1 2 4 8 16 1, 2 1 prime (octave) C 0
17 17/16 (1.0625) 1.0001 minor second C♯, D♭ +5
9 18 9/8 (1.125) 1.001 major second D +4
19 19/16 (1.1875) 1.0011 minor third D♯, E♭ −2
5 10 20 5/4 (1.25) 1.01 major third E −14
21 21/16 (1.3125) 1.0101 fourth F −29
11 22 11/8 (1.375) 1.011 tritone F♯, G♭ −49
23 23/16 (1.4375) 1.0111 +28
3 6 12 24 3/2 (1.5) 1.1 fifth G +2
25 25/16 (1.5625) 1.1001 minor sixth G♯, A♭ −27
13 26 13/8 (1.625) 1.101 +41
27 27/16 (1.6875) 1.1011 major sixth A +6
7 14 28 7/4 (1.75) 1.11 minor seventh A♯, B♭ −31
29 29/16 (1.8125) 1.1101 +30
15 30 15/8 (1.875) 1.111 major seventh B −12
31 31/16 (1.9375) 1.1111 +45

The frequencies of the harmonic series, being integer multiples of the fundamental frequency, are naturally related to each other by whole-numbered ratios and small whole-numbered ratios are likely the basis of the consonance of musical intervals (see just intonation). This objective structure is augmented by psychoacoustic phenomena. For example, a perfect fifth, say 200 and 300 Hz (cycles per second), causes a listener to perceive a combination tone of 100 Hz (the difference between 300 Hz and 200 Hz); that is, an octave below the lower (actual sounding) note. This 100 Hz first-order combination tone then interacts with both notes of the interval to produce second-order combination tones of 200 (300 − 100) and 100 (200 − 100) Hz and all further nth-order combination tones are all the same, being formed from various subtraction of 100, 200, and 300. When one contrasts this with a dissonant interval such as a tritone (not tempered) with a frequency ratio of 7:5 one gets, for example, 700 − 500 = 200 (1st order combination tone) and 500 − 200 = 300 (2nd order). The rest of the combination tones are octaves of 100 Hz so the 7:5 interval actually contains four notes: 100 Hz (and its octaves), 300 Hz, 500 Hz and 700 Hz. The lowest combination tone (100 Hz) is a seventeenth (two octaves and a major third) below the lower (actual sounding) note of the tritone. All the intervals succumb to similar analysis as has been demonstrated by Paul Hindemith in his book The Craft of Musical Composition, although he rejected the use of harmonics from the seventh and beyond.

The Mixolydian mode is consonant with the first 10 harmonics of the harmonic series (the 11th harmonic, a tritone, is not in the Mixolydian mode). The Ionian mode is consonant with only the first 6 harmonics of the series (the seventh harmonic, a minor seventh, is not in the Ionian mode). The Rishabhapriya ragam is consonant with the first 14 harmonics of the series.

Timbre of musical instruments

This section needs additional citations for verification. Please help improve this article by adding citations to reliable sources in this section. Unsourced material may be challenged and removed. (November 2011) (Learn how and when to remove this message)

The relative amplitudes (strengths) of the various harmonics primarily determine the timbre of different instruments and sounds, though onset transients, formants, noises, and inharmonicities also play a role. For example, the clarinet and saxophone have similar mouthpieces and reeds, and both produce sound through resonance of air inside a chamber whose mouthpiece end is considered closed. Because the clarinet's resonator is cylindrical, the even-numbered harmonics are less present. The saxophone's resonator is conical, which allows the even-numbered harmonics to sound more strongly and thus produces a more complex tone. The inharmonic ringing of the instrument's metal resonator is even more prominent in the sounds of brass instruments.

Human ears tend to group phase-coherent, harmonically-related frequency components into a single sensation. Rather than perceiving the individual partials–harmonic and inharmonic, of a musical tone, humans perceive them together as a tone color or timbre, and the overall pitch is heard as the fundamental of the harmonic series being experienced. If a sound is heard that is made up of even just a few simultaneous sine tones, and if the intervals among those tones form part of a harmonic series, the brain tends to group this input into a sensation of the pitch of the fundamental of that series, even if the fundamental is not present.

Variations in the frequency of harmonics can also affect the perceived fundamental pitch. These variations, most clearly documented in the piano and other stringed instruments but also apparent in brass instruments, are caused by a combination of metal stiffness and the interaction of the vibrating air or string with the resonating body of the instrument.

Interval strength

David Cope (1997) suggests the concept of interval strength, in which an interval's strength, consonance, or stability (see consonance and dissonance) is determined by its approximation to a lower and stronger, or higher and weaker, position in the harmonic series. See also: Lipps–Meyer law.

Thus, an equal-tempered perfect fifth (play) is stronger than an equal-tempered minor third (play), since they approximate a just perfect fifth (play) and just minor third (play), respectively. The just minor third appears between harmonics 5 and 6 while the just fifth appears lower, between harmonics 2 and 3.

See also

Notes

  1. William Forde Thompson (2008). Music, Thought, and Feeling: Understanding the Psychology of Music. Oxford University Press. p. 46. ISBN 978-0-19-537707-1.
  2. Hermann von Helmholtz (1885). On the Sensations of Tone as a Physiological Basis for the Theory of Music. Translated by Alexander John Ellis (2nd ed.). Longmans, Green. p. 23.
  3. John R. Pierce (2001). "Consonance and Scales". In Perry R. Cook (ed.). Music, Cognition, and Computerized Sound. MIT Press. ISBN 978-0-262-53190-0.
  4. Martha Goodway and Jay Scott Odell (1987). The Historical Harpsichord Volume Two: The Metallurgy of 17th- and 18th- Century Music Wire. Pendragon Press. ISBN 978-0-918728-54-8.
  5. Riemann 1896, p. 143: "let it be understood, the second overtone is not the third tone of the series, but the second"
  6. Roederer, Juan G. (1995). The Physics and Psychophysics of Music. Springer. p. 106. ISBN 0-387-94366-8.
  7. Kostka, Stefan; Payne, Dorothy (1995). Tonal Harmony (3rd ed.). McGraw-Hill. p. 102. ISBN 0-07-035874-5.
  8. Fonville, John (Summer 1991). "Ben Johnston's Extended Just Intonation: A guide for interpreters". Perspectives of New Music. 29 (2): 106–137 (121). doi:10.2307/833435. JSTOR 833435.
  9. Cohen, H. F. (2013). Quantifying Music: The science of music at the first stage of scientific revolution 1580–1650. Springer. p. 103. ISBN 9789401576864.
  10. Sabbagh, Peter (2003). The Development of Harmony in Scriabin's Works, p. 12. Universal. ISBN 9781581125955. Cites: Dahlhaus, Carl (1972). "Struktur und Expression bei Alexander Skrjabin", Musik des Ostens, Vol. 6, p. 229.
  11. ^ Hindemith, Paul (1942). The Craft of Musical Composition: Book 1 – Theoretical Part, pp. 15ff. Translated by Arthur Mendel (London: Schott & Co; New York: Associated Music Publishers. ISBN 0901938300). Archived 2014-07-01 at the Wayback Machine.
  12. Cope, David (1997). Techniques of the Contemporary Composer, p. 40–41. New York, New York: Schirmer Books. ISBN 0-02-864737-8.

Sources

Further reading

Acoustics
Acoustical engineering
Psychoacoustics
Audio frequency and pitch
Acousticians
Related topics
Consonance and dissonance
Consonances
Dissonances
Musical strings, wires, and instruments
List ( Hornbostel–Sachs numbers)
Monochords and
musical bows
Category: