Misplaced Pages

High-speed rail

Article snapshot taken from Wikipedia with creative commons attribution-sharealike license. Give it a read and then ask your questions in the chat. We can research this topic together.
(Redirected from High speed rail) Fastest rail-based transport systems "High-speed train" redirects here. For the "High Speed Train" in the United Kingdom, see InterCity 125. For fast railway services with speeds less than 200 km/h (125 mph), see Higher-speed rail.

High-speed railThe Tokaido Shinkansen high-speed line in Japan, with Mount Fuji in the background. The Tokaido Shinkansen, which connects the cities of Tokyo and Osaka, was the world's first high-speed rail line.High-speed trains operated by China Railway at Beijing Chaoyang railway station; China has the most extensive high-speed rail network in the world.

High-speed rail (HSR) is a type of rail transport network utilizing trains that run significantly faster than those of traditional rail, using an integrated system of specialized rolling stock and dedicated tracks. While there is no single standard that applies worldwide, lines built to handle speeds above 250 km/h (155 mph) or upgraded lines in excess of 200 km/h (125 mph) are widely considered to be high-speed.

The first high-speed rail system, the Tōkaidō Shinkansen, began operations in Honshu, Japan, in 1964. Due to the streamlined spitzer-shaped nose cone of the trains, the system also became known by its English nickname bullet train. Japan's example was followed by several European countries, initially in Italy with the Direttissima line, followed shortly thereafter by France, Germany, and Spain. Today, much of Europe has an extensive network with numerous international connections. More recent construction since the 21st century has led to China taking a leading role in high-speed rail. As of 2023, China's HSR network accounted for over two-thirds of the world's total.

In addition to these, many other countries have developed high-speed rail infrastructure to connect major cities, including: Austria, Belgium, Denmark, Finland, Greece, Indonesia, Morocco, the Netherlands, Norway, Poland, Portugal, Russia, Saudi Arabia, Serbia, South Korea, Sweden, Switzerland, Taiwan, Turkey, the United Kingdom, the United States, and Uzbekistan. Only in continental Europe and Asia does high-speed rail cross international borders.

High-speed trains mostly operate on standard gauge tracks of continuously welded rail on grade-separated rights of way with large radii. However, certain regions with wider legacy railways, including Russia and Uzbekistan, have sought to develop a high-speed railway network in Russian gauge. There are no narrow gauge high-speed railways. Countries whose legacy network is entirely or mostly of a different gauge than 1435mm – including Japan and Spain – have however often opted to build their high speed lines to standard gauge instead of the legacy railway gauge.

High-speed rail is the fastest and most efficient ground-based method of commercial transportation. However, due to requirements for large track curves, gentle gradients and grade separated track the construction of high-speed rail is more costly than conventional rail and therefore does not always present an economical advantage over conventional speed rail.

Definitions

Part of a series on
Rail transport

Infrastructure

Service and rolling stock

Urban rail transit

Miscellanea
icon Transport portal
See also: Passenger rail terminology
A pair of Italian FS' ETR 500 at Firenze Santa Maria Novella railway station. The version ETR 500 Y1 achieved 362 km/h (225 mph) on the Bologna-Florence line on 4 February 2009, a new world speed record in a tunnel.

Multiple definitions for high-speed rail are in use worldwide.

The European Union Directive 96/48/EC, Annex 1 (see also Trans-European high-speed rail network) defines high-speed rail in terms of:

Infrastructure
Track built specially for high-speed travel or specially upgraded for high-speed travel.
Minimum speed limit
Minimum speed of 250 km/h (155 mph) on lines specially built for high speed and of about 200 km/h (124 mph) on existing lines which have been specially upgraded. This must apply to at least one section of the line. Rolling stock must be able to reach a speed of at least 200 km/h to be considered high speed.
Operating conditions
Rolling stock must be designed alongside its infrastructure for complete compatibility, safety and quality of service.

The International Union of Railways (UIC) identifies three categories of high-speed rail:

Category I
New tracks specially constructed for high speeds, allowing a maximum running speed of at least 250 km/h (155 mph).
Category II
Existing tracks specially upgraded for high speeds, allowing a maximum running speed of at least 200 km/h (124 mph).
Category III
Existing tracks specially upgraded for high speeds, allowing a maximum running speed of at least 200 km/h, but with some sections having a lower allowable speed (for example due to topographic constraints, or passage through urban areas).

A third definition of high-speed and very high-speed rail requires simultaneous fulfilment of the following two conditions:

  1. Maximum achievable running speed in excess of 200 km/h (124 mph), or 250 km/h (155 mph) for very high-speed,
  2. Average running speed across the corridor in excess of 150 km/h (93 mph), or 200 km/h (124 mph) for very high-speed.

The UIC prefers to use "definitions" (plural) because they consider that there is no single standard definition of high-speed rail, nor even standard usage of the terms ("high speed", or "very high speed"). They make use of the European EC Directive 96/48, stating that high speed is a combination of all the elements which constitute the system: infrastructure, rolling stock and operating conditions. The International Union of Railways states that high-speed rail is a set of unique features, not merely a train travelling above a particular speed. Many conventionally hauled trains are able to reach 200 km/h (124 mph) in commercial service but are not considered to be high-speed trains. These include the French SNCF Intercités and German DB IC.

The criterion of 200 km/h (124 mph) is selected for several reasons; above this speed, the impacts of geometric defects are intensified, track adhesion is decreased, aerodynamic resistance is greatly increased, pressure fluctuations within tunnels cause passenger discomfort, and it becomes difficult for drivers to identify trackside signalling. Standard signaling equipment is often limited to speeds below 200 km/h (124 mph), with the traditional limits of 127 km/h (79 mph) in the US, 160 km/h (99 mph) in Germany and 125 mph (201 km/h) in Britain. Above those speeds positive train control or the European Train Control System becomes necessary or legally mandatory.

National domestic standards may vary from the international ones.

History

Railways were the first form of rapid land transportation and had an effective monopoly on long-distance passenger traffic until the development of the motor car and airliners in the early-mid 20th century. Speed had always been an important factor for railroads and they constantly tried to achieve higher speeds and decrease journey times. Rail transportation in the late 19th century was not much slower than non-high-speed trains today, and many railroads regularly operated relatively fast express trains which averaged speeds of around 100 km/h (62 mph).

Early research

The German 1903 record holder

First experiments

High-speed rail development began in Germany in 1899 when the Prussian state railway joined with ten electrical and engineering firms and electrified 72 km (45 mi) of military owned railway between Marienfelde and Zossen. The line used three-phase current at 10 kilovolts and 45 Hz.

The Van der Zypen & Charlier company of Deutz, Cologne built two railcars, one fitted with electrical equipment from Siemens-Halske, the second with equipment from Allgemeine Elektrizitäts-Gesellschaft (AEG), that were tested on the MarienfeldeZossen line during 1902 and 1903 (see Experimental three-phase railcar).

On 23 October 1903, the S&H-equipped railcar achieved a speed of 206.7 km/h (128.4 mph) and on 27 October the AEG-equipped railcar achieved 210.2 km/h (130.6 mph). These trains demonstrated the feasibility of electric high-speed rail; however, regularly scheduled electric high-speed rail travel was still more than 30 years away.

High-speed aspirations

After the breakthrough of electric railroads, it was clearly the infrastructure – especially the cost of it – which hampered the introduction of high-speed rail. Several disasters happened – derailments, head-on collisions on single-track lines, collisions with road traffic at grade crossings, etc. The physical laws were well-known, i.e. if the speed was doubled, the curve radius should be quadrupled; the same was true for the acceleration and braking distances.

Károly Zipernowsky

In 1891 engineer Károly Zipernowsky proposed a high-speed line from Vienna to Budapest for electric railcars at 250 km/h (160 mph). In 1893 Wellington Adams proposed an air-line from Chicago to St. Louis of 252 miles (406 km), at a speed of only 160 km/h (99 mph).

1907 map showing the projected Chicago–New York Electric Air Line Railroad

Alexander C. Miller had greater ambitions. In 1906, he launched the Chicago-New York Electric Air Line Railroad project to reduce the running time between the two big cities to ten hours by using electric 160 km/h (99 mph) locomotives. After seven years of effort, however, less than 50 km (31 mi) of arrow-straight track was finished. A part of the line is still used as one of the last interurbans in the US.

High-speed interurbans

In the US, some of the interurbans (i.e. trams or streetcars which run from city to city) of the early 20th century were very high-speed for their time (also Europe had and still does have some interurbans). Several high-speed rail technologies have their origin in the interurban field.

In 1903 – 30 years before the conventional railways started to streamline their trains – the officials of the Louisiana Purchase Exposition organised the Electric Railway Test Commission to conduct a series of tests to develop a carbody design that would reduce wind resistance at high speeds. A long series of tests was carried. In 1905, St. Louis Car Company built a railcar for the traction magnate Henry E. Huntington, capable of speeds approaching 160 km/h (100 mph). Once it ran 32 km (20 mi) between Los Angeles and Long Beach in 15 minutes, an average speed of 130 km/h (80 mph). However, it was too heavy for much of the tracks, so Cincinnati Car Company, J. G. Brill and others pioneered lightweight constructions, use of aluminium alloys, and low-level bogies which could operate smoothly at extremely high speeds on rough interurban tracks. Westinghouse and General Electric designed motors compact enough to be mounted on the bogies. From 1930 on, the Red Devils from Cincinnati Car Company and a some other interurban rail cars reached about 145 km/h (90 mph) in commercial traffic. The Red Devils weighed only 22 tons though they could seat 44 passengers.

Extensive wind tunnel research – the first in the railway industry – was done before J. G. Brill in 1931 built the Bullet cars for Philadelphia and Western Railroad (P&W). They were capable of running at 148 km/h (92 mph). Some of them were almost 60 years in service. P&W's Norristown High Speed Line is still in use, almost 110 years after P&W in 1907 opened their double-track Upper Darby–Strafford line without a single grade crossing with roads or other railways. The entire line was governed by an absolute block signal system.

Early German high-speed network

The German Fliegender Hamburger

On 15 May 1933, the Deutsche Reichsbahn-Gesellschaft company introduced the diesel-powered "Fliegender Hamburger" in regular service between Hamburg and Berlin (286 km or 178 mi), thereby achieving a new top speed for a regular service, with a top speed of 160 km/h (99 mph). This train was a streamlined multi-powered unit, albeit diesel, and used Jakobs bogies.

Following the success of the Hamburg line, the steam-powered Henschel-Wegmann Train was developed and introduced in June 1936 for service from Berlin to Dresden, with a regular top speed of 160 km/h (99 mph). Incidentally no train service since the cancelation of this express train in 1939 has traveled between the two cities in a faster time as of 2018. In August 2019, the travel time between Dresden-Neustadt and Berlin-Südkreuz was 102 minutes. See Berlin–Dresden railway.

Further development allowed the usage of these "Fliegenden Züge" (flying trains) on a rail network across Germany. The "Diesel-Schnelltriebwagen-Netz" (diesel high-speed-vehicle network) had been in the planning since 1934 but it never reached its envisaged size.

All high-speed service stopped in August 1939 shortly before the outbreak of World War II.

American Streamliners

Burlington Zephyr passenger train

On 26 May 1934, one year after Fliegender Hamburger introduction, the Burlington Railroad set an average speed record on long distance with their new streamlined train, the Zephyr, at 124 km/h (77 mph) with peaks at 185 km/h (115 mph). The Zephyr was made of stainless steel and, like the Fliegender Hamburger, was diesel powered, articulated with Jacobs bogies, and could reach 160 km/h (99 mph) as commercial speed.

The new service was inaugurated 11 November 1934, traveling between Kansas City and Lincoln, but at a lower speed than the record, on average speed 74 km/h (46 mph).

In 1935, the Milwaukee Road introduced the Morning Hiawatha service, hauled at 160 km/h (99 mph) by steam locomotives. In 1939, the largest railroad of the world, the Pennsylvania Railroad introduced a duplex steam engine Class S1, which was designed to be capable of hauling 1200 tons passenger trains at 161 km/h (100 mph). The S1 engine was assigned to power the popular all-coach overnight premier train the Trail Blazer between New York and Chicago since the late 1940s and it consistently reached 161 km/h (100 mph) in its service life. These were the last "high-speed" trains to use steam power. In 1936, the Twin Cities Zephyr entered service, from Chicago to Minneapolis, with an average speed of 101 km/h (63 mph).

Many of these streamliners posted travel times comparable to or even better than their modern Amtrak successors, which are limited to 127 km/h (79 mph) top speed on most of the network.

Italian electric and the last steam record

The Italian ETR 200

The German high-speed service was followed in Italy in 1938 with an electric-multiple-unit ETR 200, designed for 200 km/h (120 mph), between Bologna and Naples. It too reached 160 km/h (99 mph) in commercial service, and achieved a world mean speed record of 203 km/h (126 mph) between Florence and Milan in 1938.

In Great Britain in the same year, the streamlined steam locomotive Mallard achieved the official world speed record for steam locomotives at 202.58 km/h (125.88 mph). The external combustion engines and boilers on steam locomotives were large, heavy and time and labor-intensive to maintain, and the days of steam for high speed were numbered.

Introduction of the Talgo system

In 1945, a Spanish engineer, Alejandro Goicoechea, developed a streamlined, articulated train that was able to run on existing tracks at higher speeds than contemporary passenger trains. This was achieved by providing the locomotive and cars with a unique axle system that used one axle set per car end, connected by a Y-bar coupler. Amongst other advantages, the centre of mass was only half as high as usual. This system became famous under the name of Talgo (Tren Articulado Ligero Goicoechea Oriol), and for half a century was the main Spanish provider of high-speed trains.

First above 300 km/h developments

The French CC 7100, 1955 record holder

In the early 1950s, the French National Railway started to receive their new powerful CC 7100 electric locomotives, and began to study and evaluate running at higher speeds. In 1954, the CC 7121 hauling a full train achieved a record 243 km/h (151 mph) during a test on standard track. The next year, two specially tuned electric locomotives, the CC 7107 and the prototype BB 9004, broke previous speed records, reaching respectively 320 km/h (200 mph) and 331 km/h (206 mph), again on standard track. For the first time, 300 km/h (185 mph) was surpassed, allowing the idea of higher-speed services to be developed and further engineering studies commenced. Especially, during the 1955 records, a dangerous hunting oscillation, the swaying of the bogies which leads to dynamic instability and potential derailment was discovered. This problem was solved by yaw dampers which enabled safe running at high speeds today. Research was also made about "current harnessing" at high-speed by the pantographs, which was solved 20 years later by the Zébulon TGV's prototype.

Breakthrough: Shinkansen

The Odakyu 3000 series SE
The original 0 series Shinkansen train. Introduced in 1964, it reached a speed of 210 km/h (130 mph).
E6 and E5 series Shinkansen models

Japanese research and development

With some 45 million people living in the densely populated Tokyo–Osaka corridor, congestion on road and rail became a serious problem after World War II, and the Japanese government began thinking about ways to transport people in and between cities. Because Japan was resource limited and did not want to import petroleum for security reasons, energy-efficient high-speed rail was an attractive potential solution.

Japanese National Railways (JNR) engineers began to study the development of a high-speed regular mass transit service. In 1955, they were present at the Lille's Electrotechnology Congress in France, and during a 6-month visit, the head engineer of JNR accompanied the deputy director Marcel Tessier at the DETE (SNCF Electric traction study department). JNR engineers returned to Japan with a number of ideas and technologies they would use on their future trains, including alternating current for rail traction, and international standard gauge.

First narrow-gauge Japanese high-speed service

In 1957, the engineers at the private Odakyu Electric Railway in Greater Tokyo Area launched the Odakyu 3000 series SE EMU. This EMU set a world record for narrow gauge trains at 145 km/h (90 mph), giving the Odakyu engineers confidence they could safely and reliably build even faster trains at standard gauge. Conventional Japanese railways up until that point had largely been built in the 1,067 mm (3 ft 6 in) Cape gauge, however widening the tracks to standard gauge (1,435 mm (4 ft 8+1⁄2 in)) would make very high-speed rail much simpler due to improved stability of the wider rail gauge, and thus standard gauge was adopted for high-speed service. With the sole exceptions of Russia, Finland, and Uzbekistan all high-speed rail lines in the world are still standard gauge, even in countries where the preferred gauge for legacy lines is different.

A new train on a new line

The new service, named Shinkansen (meaning new main line) would provide a new alignment, 25% wider standard gauge utilising continuously welded rails between Tokyo and Osaka with new rolling stock, designed for 250 km/h (160 mph). However, the World Bank, whilst supporting the project, considered the design of the equipment as unproven for that speed, and set the maximum speed to 210 km/h (130 mph).

After initial feasibility tests, the plan was fast-tracked and construction of the first section of the line started on 20 April 1959. In 1963, on the new track, test runs hit a top speed of 256 km/h (159 mph). Five years after the beginning of the construction work, in October 1964, just in time for the Olympic Games, the first modern high-speed rail, the Tōkaidō Shinkansen, was opened between the two cities; a 510 km (320 mi) line between Tokyo and Ōsaka. As a result of its speeds, the Shinkansen earned international publicity and praise, and it was dubbed the "bullet train."

The first Shinkansen trains, the 0 Series Shinkansen, built by Kawasaki Heavy Industries – in English often called "Bullet Trains", after the original Japanese name Dangan Ressha (弾丸列車) – outclassed the earlier fast trains in commercial service. They traversed the 515 km (320 mi) distance in 3 hours 10 minutes, reaching a top speed of 210 km/h (130 mph) and sustaining an average speed of 162.8 km/h (101.2 mph) with stops at Nagoya and Kyoto.

High-speed rail for the masses

Speed was not only a part of the Shinkansen revolution: the Shinkansen offered high-speed rail travel to the masses. The first Bullet trains had 12 cars and later versions had up to 16, and double-deck trains further increased the capacity.

After three years, more than 100 million passengers had used the trains, and the milestone of the first one billion passengers was reached in 1976. In 1972, the line was extended a further 161 km (100 mi), and further construction has resulted in the network expanding to 2,951 km (1,834 mi) of high speed lines as of 2024, with a further 211 km (131 mi) of extensions currently under construction and due to open in 2031. The cumulative patronage on the entire system since 1964 is over 10 billion, the equivalent of approximately 140% of the world's population, without a single train passenger fatality. (Suicides, passengers falling off the platforms, and industrial accidents have resulted in fatalities.)

Since their introduction, Japan's Shinkansen systems have been undergoing constant improvement, not only increasing line speeds. Over a dozen train models have been produced, addressing diverse issues such as tunnel boom noise, vibration, aerodynamic drag, lines with lower patronage ("Mini shinkansen"), earthquake and typhoon safety, braking distance, problems due to snow, and energy consumption (newer trains are twice as energy-efficient as the initial ones despite greater speeds).

A maglev train on the Yamanashi Test Track, November 2005

Future developments

After decades of research and successful testing on a 43 km (27 mi) test track, in 2014 JR Central began constructing a Maglev Shinkansen line, which is known as the Chūō Shinkansen. These Maglev trains still have the traditional underlying tracks and the cars have wheels. This serves a practical purpose at stations and a safety purpose out on the lines in the event of a power failure. However, in normal operation, the wheels are raised up into the car as the train reaches certain speeds where the magnetic levitation effect takes over. It will link Tokyo and Osaka by 2037, with the section from Tokyo to Nagoya expected to be operational by 2027. Maximum speed is anticipated at 505 km/h (314 mph). The first generation train can be ridden by tourists visiting the test track.

China is developing two separate high-speed maglev systems.

  • the CRRC 600, is based on the Transrapid technology and is being developed by the CRRC under license from Thyssen-Krupp. A 1.5 km (0.93 mi) test track has been operating since 2006 at the Jiading Campus of Tongji University, northwest of Shanghai. A prototype vehicle was developed in 2019 and was tested in June 2020. In July 2021 a four car train was unveiled. A high-speed test track is under development and in April 2021 there was consideration given to re-opening the Emsland test facility in Germany.
  • An incompatible system has been developed at Southwest Jiaotong University in Chengdu, the design uses high-temperature super conducting magnets, which the university has been researching since 2000, and is capable of 620 km/h (390 mph). A prototype was demonstrated in January 2021 on a 165 m (180 yd) test track.

Europe and North America

The German DB Class 103

First demonstrations at 200 km/h (120 mph)

In Europe, high-speed rail began during the International Transport Fair in Munich in June 1965, when Dr Öpfering, the director of Deutsche Bundesbahn (German Federal Railways), performed 347 demonstrations at 200 km/h (120 mph) between Munich and Augsburg by DB Class 103 hauled trains. The same year the Aérotrain, a French hovercraft monorail train prototype, reached 200 km/h (120 mph) within days of operation.

Le Capitole

The BB 9200 hauled Le Capitole at 200 km/h.

After the successful introduction of the Japanese Shinkansen in 1964, at 210 km/h (130 mph), the German demonstrations up to 200 km/h (120 mph) in 1965, and the proof-of-concept jet-powered Aérotrain, SNCF ran its fastest trains at 160 km/h (99 mph).

In 1966, French Infrastructure Minister Edgard Pisani consulted engineers and gave the French National Railways twelve months to raise speeds to 200 km/h (120 mph). The classic line Paris–Toulouse was chosen, and fitted, to support 200 km/h (120 mph) rather than 140 km/h (87 mph). Some improvements were set, notably the signals system, development of on board "in-cab" signalling system, and curve revision.

The next year, in May 1967, a regular service at 200 km/h (120 mph) was inaugurated by the TEE Le Capitole between Paris and Toulouse, with specially adapted SNCF Class BB 9200 locomotives hauling classic UIC cars, and a full red livery. It averaged 119 km/h (74 mph) over the 713 km (443 mi).

At the same time, the Aérotrain prototype 02 reached 345 km/h (214 mph) on a half-scale experimental track. In 1969, it achieved 422 km/h (262 mph) on the same track. On 5 March 1974, the full-scale commercial prototype Aérotrain I80HV, jet powered, reached 430 km/h (270 mph).

US Metroliner trains

Metroliner trains developed in the U.S. for rapid service between New York and Washington, DC

In the United States, following the creation of Japan's first high-speed Shinkansen, President Lyndon B. Johnson as part of his Great Society infrastructure building initiatives asked the Congress to devise a way to increase speeds on the railroads. Congress delivered the High Speed Ground Transportation Act of 1965 which passed with overwhelming bipartisan support and helped to create regular Metroliner service between New York City, Philadelphia, and Washington, D.C. The new service was inaugurated in 1969, with top speeds of 200 km/h (120 mph) and averaging 145 km/h (90 mph) along the route, with the travel time as little as 2 hours 30 minutes. In a 1967 competition with a GE powered Metroliner on Penn Central's mainline, the United Aircraft Corporation TurboTrain set a record of 275 km/h (171 mph).

United Kingdom, Italy and Germany

Further information: High-speed rail in the United Kingdom
An ETR 500 train running on the Florence–Rome high-speed line near Arezzo in Italy, the first high-speed railway opened in Europe.

In 1976, British Rail introduced a high-speed service able to reach 201 km/h (125 mph) using the InterCity 125 diesel-electric trainsets under the brand name of High Speed Train (HST). It was the fastest diesel-powered train in regular service and it improved upon its 160 km/h (100 mph) forerunners in speed and acceleration. As of 2019 it is still in regular service as the fastest diesel-powered train. The train was as a reversible multi-car set having driving power-cars at both ends and a fixed formation of passenger cars between them. Journey times were reduced by an hour for example on the East Coast Main Line, and passenger numbers increased. As of 2019 many of these trains are still in service, private operators have often preferred to rebuild the units with new engines rather than replace them. Prior to COVID-19, ridership of the UK's High Speed Intercity Services had exceeded 40 million journeys per annum.

The next year, in 1977, Germany finally introduced a new service at 200 km/h (120 mph), on the Munich–Augsburg line. That same year, Italy inaugurated the first European High-Speed line, the Direttissima between Rome and Florence, designed for 250 km/h (160 mph), but used by FS E444 hauled train at 200 km/h (120 mph). In France this year also saw the abandonment for political reasons of the Aérotrain project, in favour of the TGV.

Evolution in Europe

Main article: High-speed rail in Europe

Italy

Main article: High-speed rail in Italy
Map of Italian high-speed and higher speed rail network
FS' Frecciarossa 1000 high speed train at Milano Centrale railway station, with a maximum speed of 400 km/h (249 mph), is one of the fastest trains in Europe.
ETR 675 [it] Italo EVO (NTV) at Venezia Mestre railway station.

The earliest European high-speed railway to be built was the Italian Florence–Rome high-speed railway (also called "Direttissima") in 1977. High-speed trains in Italy were developed during the 1960s. E444 locomotives were the first standard locomotives capable of top speed of 200 km/h (125 mph), while an ALe 601 electrical multiple unit (EMU) reached a speed of 240 km/h (150 mph) during a test. Other EMUs, such as the ETR 220, ETR 250 and ETR 300, were also updated for speeds up to 200 km/h (125 mph). The braking systems of cars were updated to match the increased travelling speeds.

On 25 June 1970, work was started on the Rome–Florence Direttissima, the first high-speed line in Italy and in Europe. It included the 5,375-metre-long (3.340 mi) bridge on the Paglia river, then the longest in Europe. Works were completed in the early 1990s.

In 1975, a program for a widespread updating of the rolling stock was launched. However, as it was decided to put more emphasis on local traffic, this caused a shifting of resources from the ongoing high-speed projects, with their subsequent slowing or, in some cases, total abandonment. Therefore, 160 E.656 electric and 35 D.345 locomotives for short-medium range traffic were acquired, together with 80 EMUs of the ALe 801/940 class, 120 ALn 668 diesel railcars. Some 1,000 much-needed passenger and 7,000 freight cars were also ordered.

In the 1990s, work started on the Treno Alta Velocità (TAV) project, which involved building a new high-speed network on the routes Milan – (Bologna–Florence–Rome–Naples) – Salerno, Turin – (Milan–Verona–Venice) – Trieste and Milan–Genoa. Most of the planned lines have already been opened, while international links with France, Switzerland, Austria and Slovenia are underway.

Most of the Rome–Naples line opened in December 2005, the Turin–Milan line partially opened in February 2006 and the Milan–Bologna line opened in December 2008. The remaining sections of the Rome–Naples and the Turin–Milan lines and the Bologna–Florence line were completed in December 2009. All these lines are designed for speeds up to 300 km/h (185 mph). Since then, it is possible to travel from Turin to Salerno (ca. 950 km (590 mi)) in less than 5 hours. More than 100 trains per day are operated.

Other proposed high-speed lines are Salerno-Reggio Calabria (connected to Sicily with the future bridge over the Strait of Messina), Palermo-Catania and Naples–Bari.

The main public operator of high-speed trains (alta velocità AV, formerly Eurostar Italia) is Trenitalia, part of FSI. Trains are divided into three categories (called "Le Frecce"): Frecciarossa ("Red arrow") trains operate at a maximum of 300 km/h (185 mph) on dedicated high-speed tracks; Frecciargento (Silver arrow) trains operate at a maximum of 250 km/h (155 mph) on both high-speed and mainline tracks; Frecciabianca (White arrow) trains operate at a maximum of 200 km/h (125 mph) on mainline tracks only.

Since 2012, a new and Italy's first private train operator, NTV (branded as Italo), run high-speed services in competition with Trenitalia. Even nowadays, Italy is the only country in Europe with a private high-speed train operator.

Construction of the Milan-Venice high-speed line has begun in 2013 and in 2016 the Milan-Treviglio section has been opened to passenger traffic; the Milan-Genoa high-speed line (Terzo Valico dei Giovi) is also under construction.

Today it is possible to travel from Rome to Milan in less than 3 hours (2h 55') with the Frecciarossa 1000, the new high-speed train. To cover this route, there's a train every 30 minutes.

France

Main article: High-speed rail in France
One power-car of the gas-turbine prototype "TGV 001"
The TGV Sud-Est, at the Gare de Lyon, in 1982
The TGV at 574.8 km/h (357.2 mph) in 2007

Following the 1955 records, two divisions of the SNCF began to study high-speed services. In 1964, the DETMT (petrol-engine traction studies department of SNCF) investigated the use of gas turbines: a diesel-powered railcar was modified with a gas-turbine, and was called "TGV" (Turbotrain Grande Vitesse). It reached 230 km/h (140 mph) in 1967, and served as a basis for the future Turbotrain and the real TGV. At the same time, the new "SNCF Research Department", created in 1966, was studying various projects, including one code-named "C03: Railways possibilities on new infrastructure (tracks)".

In 1969, the "C03 project" was transferred to public administration while a contract with Alstom was signed for the construction of two gas-turbine high-speed train prototypes, named "TGV 001". The prototype consisted of a set of five carriages, plus a power car at each end, both powered by two gas-turbine engines. The sets used Jacobs bogies, which reduce drag and increase safety.

In 1970, the DETMT's Turbotrain began operations on the Paris–Cherbourg line, and operated at 160 km/h (99 mph) despite being designed for usage at 200 km/h (120 mph). It used gas-turbine powered multiple elements and was the basis for future experimentation with TGV services, including shuttle services and regular high rate schedules.

In 1971, the "C03" project, now known as "TGV Sud-Est", was validated by the government, against Bertin's Aerotrain. Until this date, there was a rivalry between the French Land Settlement Commission (DATAR), supporting the Aérotrain, and the SNCF and its ministry, supporting conventional rail. The "C03 project" included a new High-Speed line between Paris and Lyon, with new multi-engined trains running at 260 km/h (160 mph). At that time, the classic Paris-Lyon line was already congested and a new line was required; this busy corridor, neither too short (where high speeds give limited reductions in end to end times) nor too long (where planes are faster in city center to city center travel time), was the best choice for the new service.

The 1973 oil crisis substantially increased oil prices. In the continuity of the De Gaulle "energy self-sufficiency" and nuclear-energy policy (Pierre Messmer then French Prime Minister announced an ambitious buildout of nuclear power in France in 1974), a ministry decision switched the future TGV from now costly gas-turbine to full electric energy in 1974. An electric railcar named Zébulon was developed for testing at very high speeds, reaching a speed of 306 km/h (190 mph). It was used to develop pantographs capable of withstanding speeds of over 300 km/h (185 mph).

After intensive tests with the gas-turbine "TGV 001" prototype, and the electric "Zébulon", in 1977, the SNCF placed an order to the group AlstomFrancorail–MTE for 87 TGV Sud-Est trainsets. They used the "TGV 001" concept, with a permanently coupled set of eight cars, sharing Jacobs bogies, and hauled by two electric-power cars, one at each end.

In 1981, the first section of the new Paris–Lyon High-Speed line was inaugurated, with a 260 km/h (160 mph) top speed (then 270 km/h (170 mph) soon after). Being able to use both dedicated high-speed and conventional lines, the TGV offered the ability to join every city in the country at shorter journey times. After the introduction of the TGV on some routes, air traffic on these routes decreased and in some cases disappeared. The TGV set a publicised speed records in 1981 at 380 km/h (240 mph), in 1990 at 515 km/h (320 mph), and then in 2007 at 574.8 km/h (357.2 mph), although these were test speeds, rather than operation train speeds.

Germany

Main article: High-speed rail in Germany
The German ICE 1

Following the ETR 450 and Direttissima in Italy and French TGV, in 1991 Germany was the third country in Europe to inaugurate a high-speed rail service, with the launch of the Intercity-Express (ICE) on the new Hannover–Würzburg high-speed railway, operating at a top speed of 280 km/h (170 mph). The German ICE train was similar to the TGV, with dedicated streamlined power cars at both ends, but a variable number of trailers between them. Unlike the TGV, the trailers had two conventional bogies per car, and could be uncoupled, allowing the train to be lengthened or shortened. This introduction was the result of ten years of study with the ICE-V prototype, originally called Intercity Experimental, which broke the world speed record in 1988, reaching 406 km/h (252 mph).

Spain

Main article: High-speed rail in Spain
The Spanish AVE Class 102 "Pato" (duck)

In 1992, just in time for the Barcelona Olympic Games and Seville Expo '92, the Madrid–Seville high-speed rail line opened in Spain with 25 kV AC electrification, and standard gauge, differing from all other Spanish lines which used Iberian gauge. This allowed the AVE rail service to begin operations using Class 100 trainsets built by Alstom, directly derived in design from the French TGV trains. The service was very popular and development continued on high-speed rail in Spain.

In 2005, the Spanish government announced an ambitious plan, (PEIT 2005–2020) envisioning that by 2020, 90 percent of the population would live within 50 km (30 mi) of a station served by AVE. Spain began building the largest HSR network in Europe: as of 2011, five of the new lines have opened (Madrid–Zaragoza–Lleida–Tarragona–Barcelona, Córdoba–Malaga, Madrid–Toledo, Madrid–Segovia–Valladolid, Madrid–Cuenca–Valencia) and another 2,219 km (1,380 mi) were under construction. Opened in early 2013, the Perpignan–Barcelona high-speed rail line provides a link with neighbouring France with trains running to Paris, Lyon, Montpellier and Marseille.

As of May 2023, the Spanish high-speed rail network is the longest HSR network in Europe with 3,966 km (2,464 mi) and the second longest in the world, after China's.

Turkey

Main article: High-speed rail in Turkey
TCDD HT80000

In 2009, Turkey inaugurated a high-speed service between Ankara and Eskişehir. This has been followed up by an AnkaraKonya route, and the Eskisehir line has been extended to Istanbul (European part). In this extension, Europe and Asia were connected by an undersea tunnel, Marmaray in the Bosphorus. The first connection between two continents in the world as a high-speed train line was made in Istanbul. The last station of this line in Europe is Halkalı station. An extension to Sivas was opened in April 2023.

United States

Main article: High-speed rail in the United States
The Acela Express

In 1992, the United States Congress passed the Amtrak Authorization and Development Act that authorized Amtrak to start working on service improvements on the segment between Boston and New York City of the Northeast Corridor. The primary objectives were to electrify the line north of New Haven, Connecticut, to eliminate grade crossings and replace the then 30-year-old Metro liners with new trains, so that the distance between Boston and New York City could be covered in 3 hours or less.

Amtrak started testing two trains, the Swedish X2000 and the German ICE 1, in the same year along its fully electrified segment between New York City and Washington, D.C. The officials favored the X2000 as it had a tilting mechanism. However, the Swedish manufacturer never bid on the contract as the burdensome United States railroad regulations required them to heavily modify the train resulting in added weight, among other things. Eventually, a custom-made tilting train derived from TGV, manufactured by Alstom and Bombardier, won the contract and was put into service in December 2000.

The new service was named "Acela Express" and linked Boston, New York City, Philadelphia, Baltimore, and Washington, D.C. The service did not meet the 3-hour travel time objective between Boston and New York City. The time was 3 hours and 24 minutes as it partially ran on regular lines, limiting its average speed, with a maximum speed of 240 km/h (150 mph) being reached on a small section of its route through Rhode Island and Massachusetts.

As of November 2021, the U.S. has one high-speed rail line under construction (California High-Speed Rail) in California, and advanced planning by a company called Texas Central Railway in Texas, higher-speed rail projects in the Pacific Northwest, Midwest and Southeast, as well as upgrades on the high-speed Northeast Corridor. The private higher speed rail venture Brightline in Florida started operations along part of its route in early 2018. The top speed is 201 km/h (125 mph) but most of the line still runs at 127 km/h (79 mph).

Expansion in East Asia

For four decades from its opening in 1964, the Japanese Shinkansen was the only high-speed rail service outside of Europe. In the 2000s a number of new high-speed rail services started operating in East Asia.

Chinese CRH and CR

Main article: High-speed rail in China A CR400AF train set on the Beijing–Shanghai high-speed railway at Beijing South railway stationA CRH380A at Luoyang Longmen railway station

High-speed rail was introduced to China in 2003 with the Qinhuangdao–Shenyang high-speed railway. The Chinese government made high-speed rail construction a cornerstone of its economic stimulus program in order to combat the effects of the 2008 global financial crisis and the result has been a rapid development of the Chinese rail system into the world's most extensive high-speed rail network. By 2013 the system had 11,028 km (6,852 mi) of operational track, accounting for about half of the world's total at the time. By the end of 2018, the total high-speed railway (HSR) in China had risen to over 29,000 kilometres (18,000 miles). Over 1.71 billion trips were made in 2017, more than half of China's total railway passenger delivery, making it the world's busiest network.

State planning for high-speed railway began in the early 1990s, and the country's first high-speed rail line, the Qinhuangdao–Shenyang Passenger Railway, was built in 1999 and opened to commercial operation in 2003. This line could accommodate commercial trains running at up to 200 km/h (120 mph). Planners also considered Germany's Transrapid maglev technology and built the Shanghai maglev train, which runs on a 30.5 km (19.0 mi) track linking the Pudong, the city's financial district, and the Pudong International Airport. The maglev train service began operating in 2004 with trains reaching a top speed of 431 km/h (268 mph), and remains the fastest high-speed service in the world. Maglev, however, was not adopted nationally and all subsequent expansion features high-speed rail on conventional tracks.

In the 1990s, China's domestic train production industry designed and produced a series of high-speed train prototypes but few were used in commercial operation and none were mass-produced. The Chinese Ministry of Railways (MOR) then arranged for the purchase of foreign high-speed trains from French, German, and Japanese manufacturers along with certain technology transfers and joint ventures with domestic trainmakers. In 2007, the MOR introduced the China Railways High-speed (CRH) service, also known as "Harmony Trains", a version of the German Siemens Velaro high-speed train.

In 2008, high-speed trains began running at a top speed of 350 km/h (220 mph) on the Beijing–Tianjin intercity railway, which opened during the 2008 Summer Olympics in Beijing. The following year, trains on the newly opened Wuhan–Guangzhou high-speed railway set a world record for average speed over an entire trip, at 312.5 km/h (194.2 mph) over 968 kilometres (601 miles).

A collision of high-speed trains on 23 July 2011 in Zhejiang province killed 40 and injured 195, raising concerns about operational safety. A credit crunch later that year slowed the construction of new lines. In July 2011, top train speeds were lowered to 300 km/h (185 mph). But by 2012, the high-speed rail boom had renewed with new lines and new rolling stock by domestic producers that had indigenised foreign technology. On 26 December 2012, China opened the Beijing–Guangzhou–Shenzhen–Hong Kong high-speed railway, the world's longest high-speed rail line, which runs 2,208 km (1,372 mi) from Beijing West railway station to Shenzhen North Railway Station. The network set a target to create the 4+4 National high-speed rail Grid by 2015, and continues to rapidly expand with the July 2016 announcement of the 8+8 National high-speed rail Grid. In 2017, 350 km/h (217 mph) services resumed on the Beijing–Shanghai high-speed railway, once again refreshing the world record for average speed with select services running between Beijing South to Nanjing South reaching average speeds of 317.7 km/h (197.4 mph).

South Korean KTX

The Korean-developed KTX Sancheon

In South Korea, construction of the high-speed line from Seoul to Busan began in 1992. The Seoul–Busan corridor is Korea's busiest running between the two largest cities. In 1982, it represented 65.8% of South Korea's population, a number that grew to 73.3% by 1995, along with 70% of freight traffic and 66% of passenger traffic. With both the Gyeongbu Expressway and Korail's Gyeongbu Line congested as of the late 1970s, the government saw the pressing need for another form of transportation.

The line known as Korea Train Express (KTX) was launched on 1 April 2004, using French (TGV) technology. Top speed for trains in regular service is currently 305 km/h (190 mph), though the infrastructure is designed for 350 km/h (220 mph). The initial rolling stock was based on Alstom's TGV Réseau, and was partly built in Korea. The domestically developed HSR-350x, which achieved 352.4 km/h (219.0 mph) in tests, resulted in a second type of high-speed trains now operated by Korail, the KTX Sancheon. The next generation KTX train, HEMU-430X, achieved 421.4 km/h (261.8 mph) in 2013, making South Korea the world's fourth country after France, Japan, and China to develop a high-speed train running on conventional rail above 420 km/h (260 mph).

Taiwan HSR

Taiwan high-speed rail, derived from the Shinkansen

Taiwan High Speed Rail's first and only HSR line opened for service on 5 January 2007, using Japanese trains with a top speed of 300 km/h (185 mph). The service traverses 345 km (214 mi) from Nangang to Zuoying in as little as 105 minutes. While it contains only one line, its route covers Western Taiwan where over 90% of Taiwan's population live; connecting most major cities of Taiwan: Taipei, New Taipei, Taoyuan, Hsinchu, Taichung, Chiayi, Tainan, and Kaohsiung. Once THSR began operations, almost all passengers switched from airlines flying parallel routes while road traffic was also reduced.

Middle East and Central Asia

Saudi Arabia

Main article: Haramain high-speed railway

Uzbekistan

Uzbekistan opened the Afrosiyob 344 km (214 mi) service from Tashkent to Samarkand in 2011, which was upgraded in 2013 to an average operational speed of 160 km/h (99 mph) and peak speed of 250 km/h (160 mph). The Talgo 250 service has been extended to Karshi as of August 2015 whereby the train travels 450 km (280 mi) in 3 hours. As of August 2016, the train service was extended to Bukhara, and the 600 km (370 mi) extension will take 3 hours and 20 minutes down from 7 hours.

Africa

Egypt

Main article: High-speed rail in Egypt

As of 2022, there are no operational high-speed rail lines in Egypt. Plans have been announced for three lines, aiming to connect the Nile river valley, the Mediterranean coast, and the Red Sea. Construction had started on at least two lines.

Morocco

In November 2007, the Moroccan government decided to undertake the construction of a high-speed rail line between the economic capital Casablanca and Tangier, one of the largest harbour cities on the Strait of Gibraltar. The line will also serve the capital Rabat and Kenitra. The first section of the line, the 323-kilometre (201 mi) Kenitra–Tangier high-speed rail line, was completed in 2018. Future projects include expansions south to Marrakech and Agadir, and east to Meknes, Fes and Oujda.

Network

Main article: List of high-speed railway lines See also: Proposed high-speed rail by country

Maps

Operational high-speed lines in the United StatesOperational high-speed lines in EuropeOperational high-speed lines in Western & Central AsiaOperational high-speed lines in East AsiaOperational (Indonesia) and under construction (India, Thailand) high-speed lines in South and Southeast Asia  310–350 km/h (193–217 mph)   270–300 km/h (168–186 mph)   240–260 km/h (149–162 mph)
  200–230 km/h (124–143 mph)   Under construction   Other railways

Technologies

High-speed line on a viaduct to avoid ramp and road-crossing, with a British Rail Class 373 from Eurostar in old livery crossing it.
A German high-speed line, with ballastless track

Continuous welded rail is generally used to reduce track vibrations and misalignment. Almost all high-speed lines are electrically driven via overhead lines, have in-cab signalling, and use advanced switches using very low entry and frog angles. HSR tracks may also be designed to reduce vibrations originating from high speed rail use.

Road-rail parallel layout

A German high-speed line being built along a highway

The road-rail parallel layout uses land beside highways for railway lines. Examples include Paris/Lyon and Köln–Frankfurt in which 15% and 70% of the track runs beside highways, respectively. There are synergies to be achieved from such a setup as noise mitigation measures for the road benefit the railway and vice versa and furthermore less land must be taken through expropriation as land may have already been acquired for the construction of the other infrastructure. In addition to that, habitats of local wildlife are disrupted only once (by the combined rail/road right of way) instead of at multiple points. However, downsides include the fact that roads usually allow steeper grades and sharper turns than high-speed rail lines and thus co-locating them may not always be suitable. Moreover, both roads and railways often make use of narrow river valleys or mountain passes which do not allow a lot of infrastructure to be sited next to each other.

Track sharing

In China, high-speed lines at speeds between 200 and 250 km/h (124 and 155 mph) may carry freight or passengers, while lines operating at speeds over 300 km/h (185 mph) are used only by passenger CRH/CR trains.

In the United Kingdom, HS1 is also used by regional trains run by Southeastern at speeds of up to 225 km/h (140 mph), and occasionally freight trains that run to central Europe.

In Germany, some lines are shared with Inter-City and regional trains at day and freight trains at night.

In France, some lines are shared with regional trains that travel at 200 km/h (124 mph), for example TER Nantes-Laval.

Mixing trains of vastly different speeds and/or stopping patterns on the same tracks drastically reduces capacity, so usually a temporal separation (e.g. freight trains use the high-speed line only at night when no or only a few passenger trains operate) is employed or the slower train has to wait at a station or passing siding for the faster train to overtake - even if the faster train is delayed, thus delaying the slower train, too.

Cost

The cost per kilometre in Spain was estimated at between €9 million (Madrid–Andalucía) and €22 million (Madrid–Valladolid). In Italy, the cost was between €24 million (Roma–Napoli) and €68 million (Bologna–Firenze). In the 2010s, costs per kilometre in France ranged from €18 million (BLP Brittany) to €26 million (Sud Europe Atlantique). The World Bank estimated in 2019 that the Chinese HSR network was built at an average cost of $17–21 million per km.

Freight high-speed rail

All high-speed trains have been designed to carry passengers only. There are very few high-speed freight services in the world; they all use trains that were originally designed to carry passengers.

During the planning of the Tokaido Shinkansen, the Japanese National Railways were planning for freight services along the route. This plan was discarded before the line opened, but since 2019 light freight has been carried on some Shinkansen services.

The French TGV La Poste was for a long time the sole very high-speed train service, transporting mail in France for La Poste at a maximum top speed of 270 kilometers per hour (170 mph), between 1984 and 2015. The trainsets were either specifically adapted and built, either converted, passenger TGV Sud-Est trainsets.

In Italy, Mercitalia Fast is a high-speed freight service launched in October 2018 by Mercitalia. It uses converted passenger ETR 500 trainsets to carry goods at average speeds of 180 km/h (110 mph), at first between Caserta and Bologna, with plans to extend the network throughout Italy.

In some countries, high-speed rail is integrated with courier services to provide fast door-to-door intercity deliveries. For example, China Railways has partnered with SF Express for high-speed cargo deliveries and Deutsche Bahn offers express deliveries within Germany as well as to some major cities outside the country on the ICE network. Rather than using dedicated freight trains, these use luggage racks and other unused space in passenger trains.

Non-high-speed freight trains running on high-speed lines is much more common; for example, High Speed 1 sees weekly freight services. However, high speed lines tend to be steeper than regular (non-mountain) railways, which poses a problem for most freight trains as they have a lower power to weight ratio and thus more difficulty climbing steep slopes. For example, the Frankfurt Cologne high speed line has inclines up to 40‰. If a high-speed line through even somewhat hilly terrain is to be usable for freight, expensive engineered structures will need to be built, as is the case with the Hannover Würzburg high-speed line which contains the longest and the second longest mainline rail tunnel in Germany and altogether runs on tunnels or bridges for roughly half of its length.

Rolling stock

This section needs expansion. You can help by adding to it. (July 2013)
See also: List of high-speed trains

Key technologies used in high-speed train rolling stock include tilting trainsets, aerodynamic designs (to reduce drag, lift, and noise), air brakes, regenerative braking, engine technology and dynamic weight shifting. Notable high-speed train manufacturers include Alstom, Hitachi, Kawasaki, Siemens, Stadler Rail, and CRRC.

Comparison with other modes of transport

Optimal distance

While commercial high-speed trains have lower maximum speeds than jet aircraft, they offer shorter total trip times than air travel for short distances. They typically connect city centre rail stations to each other, while air transport connects airports that are typically farther from city centres.

High-speed rail (HSR) is best suited for journeys of 1 to 4+1⁄2 hours (about 150–900 km or 93–559 mi), for which the train can beat air and car trip time. For trips under about 700 km (430 mi), the process of checking in and going through airport security, as well as travelling to and from the airport, makes the total air journey time equal to or slower than HSR. European authorities treat HSR as competitive with passenger air for HSR trips under 4+1⁄2 hours.

HSR eliminated air transport from routes such as Paris–Lyon, Paris–Brussels, Cologne–Frankfurt, Nanjing–Wuhan, Chongqing–Chengdu, Taipei–Kaohsiung, Tokyo–Nagoya, Tokyo–Sendai and Tokyo–Niigata, while also greatly reducing air traffic on routes such as Amsterdam–Brussels, Barcelona-Madrid and Naples–Rome–Milan. China Southern Airlines, China's largest airline, expects the construction of China's high-speed railway network to impact (through increased competition and falling revenues) 25% of its route network in the coming years.

Market shares

European data indicate that air traffic is more sensitive than road traffic (car and bus) to competition from HSR, at least on journeys of 400 km (249 mi) and more. TGV Sud-Est reduced the travel time Paris–Lyon from almost four to about two hours. Market share rose from 40 to 72%. Air and road market shares shrunk from 31 to 7% and from 29 to 21%, respectively. On the Madrid–Seville link, the AVE connection increased share from 16 to 52%; air traffic shrunk from 40 to 13%; road traffic from 44 to 36%, hence the rail market amounted to 80% of combined rail and air traffic. This figure increased to 89% in 2009, according to Spanish rail operator Renfe.

According to Peter Jorritsma, the rail market share s, as compared to planes, can be computed approximately as a function of the travelling time in minutes t by the logistic formula

s = 1 0.031 × 1.016 t + 1 {\displaystyle s={1 \over 0.031\times 1.016^{t}+1}}

According to this formula, a journey time of three hours yields a 65% market share, not taking into account any price differential in tickets.

In Japan, there is a so-called "4-hour wall" in high-speed rail's market share: If the high-speed rail journey time exceeds 4 hours, then people likely choose planes over high-speed rail. For instance, from Tokyo to Osaka, a 2h22m-journey by Shinkansen, high-speed rail has an 85% market share whereas planes have 15%. From Tokyo to Hiroshima, a 3h44m-journey by Shinkansen, high-speed rail has a 67% market share whereas planes have 33%. The situation is the reverse on the Tokyo to Fukuoka route where high-speed rail takes 4h47m and rail only has 10% market share and planes 90%.

In Taiwan, China Airlines cancelled all flights to Taichung Airport within a year of Taiwan high-speed rail starting operations. Completion of the high-speed railway in 2007 led to drastically fewer flights along the island's west coast, with flights between Taipei and Kaohsiung ceasing altogether in 2012.

Energy efficiency

Travel by rail is more competitive in areas of higher population density or where gasoline is expensive because conventional trains are more fuel-efficient than cars when ridership is high, similar to other forms of mass transit. Very few high-speed trains consume diesel or other fossil fuels but the power stations that provide electric trains with electricity can consume fossil fuels. In Japan (prior to the Fukushima Daiichi nuclear disaster) and France, with very extensive high-speed rail networks, a large proportion of electricity comes from nuclear power. On the Eurostar, which primarily runs off the French grid, emissions from traveling by train from London to Paris are 90% lower than by flying. In Germany 38.5% of all electricity was produced from renewable sources in 2017, however railways run on their own grid partially independent from the general grid and relying in part on dedicated power plants. Even using electricity generated from coal, fossil gas or oil, high-speed trains are significantly more fuel-efficient per passenger per kilometer traveled (despite the greater resistance to motion of the railcars at higher speeds) than the typical automobile because of economies of scale in generator technology and trains themselves, as well as lower air friction and rolling resistance at the same speed.

Automobiles and buses

High-speed rail can accommodate more passengers at far higher speeds than automobiles. Generally, the longer the journey, the better the time advantage of rail over the road if going to the same destination. However, high-speed rail can be competitive with cars on shorter distances, 0–150 kilometres (0–90 mi), for example for commuting, especially if the car users experience road congestion or expensive parking fees. In Norway, the Gardermoen Line has made the rail market share for passengers from Oslo to the airport (42 km) rise to 51% in 2014, compared to 17% for buses and 28% for private cars and taxis. On such short lines−particularly services which call at stations close to one another−the acceleration capabilities of the trains may be more important than their maximum speed. Extreme commuting has been enabled by high-speed rail with commuters covering distances by rail daily that they would not usually by car. Furthermore, stations in less densely populated areas within the larger conurbation of larger cities, like Montabaur railway station and Limburg Süd railway station between Frankfurt and Cologne, are attractive for commuters as the housing prices are more affordable than in the central cities - even when taking into account the price of a yearly ticket for the train. Consequently, Montabaur has the highest per capita rate of Bahn Card 100 in Germany — a ticket that allows unlimited travel on all trains in Germany for a fixed yearly price.

Moreover, a typical passenger rail carries 2.83 times as many passengers per hour per meter width as a road. A typical capacity is the Eurostar, which provides capacity for 12 trains per hour and 800 passengers per train, totaling 9,600 passengers per hour in each direction. By contrast, the Highway Capacity Manual gives a maximum capacity of 2,250 passenger cars per hour per lane, excluding other vehicles, assuming an average vehicle occupancy of 1.57 people. A standard twin track railway has a typical capacity 13% greater than a 6-lane highway (3 lanes each way), while requiring only 40% of the land (1.0/3.0 versus 2.5/7.5 hectares per kilometre of direct/indirect land consumption). The Tokaido Shinkansen line in Japan, has a much higher ratio (with as many as 20,000 passengers per hour per direction). Similarly, commuter roads tend to carry fewer than 1.57 persons per vehicle (Washington State Department of Transportation, for instance, uses 1.2 persons per vehicle) during commute times. Compare this to the capacity of typical small to mid-sized airliners like the Airbus A320 which in a high-density arrangement has 186 seats or the Boeing 737-800 which has an absolute maximum seated capacity of 189 in a high-density single-class layout - as employed for example by Ryanair. If a business or first class section is provided, those airliners will have lower seating capacities than that.

Air travel

This section is in list format but may read better as prose. You can help by converting this section, if appropriate. Editing help is available. (February 2019)

HSR Advantages

  • Less boarding infrastructure: Although air transit moves at higher speeds than high-speed rail, total time to destination can be increased by travel to/from far out airports, check-in, baggage handling, security, and boarding, which may also increase cost to air travel.
  • Short range advantages: Trains may be preferred in short to mid-range distances since rail stations are typically closer to urban centers than airports. Likewise, air travel needs longer distances to have a speed advantage after accounting for both processing time and transit to the airport.
  • Urban centers: Particularly for dense city centers, short-hop air travel may not be ideal to serve these areas as airports tend to be far out of the city, due to land scarcity, short runway limitations, building heights, as well as airspace issues.
  • Weather: Rail travel also requires less weather dependency than air travel. A well-designed and operated rail system can only be affected by severe weather conditions, such as heavy snow, heavy fog, and major storm. Flights however, often face cancellations or delays under less severe conditions.
  • Comfort: High-speed trains also have comfort advantages, since train passengers are allowed to move freely about the train at any point in the journey. Since airlines have complicated calculations to try to minimise weight to save fuel or to allow takeoff at certain runway lengths, rail seats are also less subject to weight restrictions than on planes, and as such may have more padding and legroom. Technology advances such as continuously welded rail have minimised the vibration found on slower railways, while air travel remains affected by turbulence when adverse wind conditions arise. Trains can also accommodate intermediate stops at lower time and energetic costs than planes, though this applies less to HSR than to the slower conventional trains.
  • Delays: On particular busy air-routes – those that HSR has historically been most successful on – trains are also less prone to delays due to congested airports, or in the case of China, airspace. A train that is late by a couple of minutes will not have to wait for another slot to open up, unlike airplanes at congested airports. Furthermore, many airlines see short-haul flights as increasingly uneconomic and in some countries airlines rely on high-speed rail instead of short-haul flights for connecting services.
  • De-icing: HSR does not need to spend time deicing as planes do, which is time-consuming but critical; it can dent airline profitability as planes remain on the ground and pay airport fees by the hour, as well as take up parking space and contributing to congestive delays.
  • Hot and High: Some airlines have cancelled or move their flights to takeoff at night due to hot and high conditions. Such is the case for Hainan Airlines in Las Vegas in 2017, which moved its long haul takeoff slot to after midnight. Similarly, Norwegian Air Shuttle cancelled all its Europe-bound flights during summer due to heat. high-speed rail may complement airport operations during hot hours when takeoffs become uneconomical or otherwise problematic.
  • Noise and pollution: Major airports are heavy polluters, downwind of LAX particulate pollution doubles, even accounting for Port of LA/Long Beach shipping and heavy freeway traffic. Trains may run on renewable energy, and electric trains produce no local pollution in critical urban areas at any rate. Noise also is an issue for residents.
  • Ability to serve multiple stops: An airplane spends significant amounts of time loading and unloading cargo and/or passengers as well as landing, taxiing and starting again. Trains spend only a few minutes stopping at intermediate stations, often greatly enhancing the business case at little cost.
  • Energy: high-speed trains are more fuel-efficient per passenger space offered than planes. Furthermore, they usually run on electricity, which can be produced from a wider range of sources than kerosene.

Disadvantages

  • HSR usually requires land acquisition, for example in Fresno, US, where it was caught up in legal paperwork.
  • HSR is subject to land subsidence, where expensive fixes sent costs soaring in Taiwan.
  • HSR is affected by topography of the terrain as crossing mountain ranges or large bodies of water requires expensive tunnels and bridges.
  • HSR is costly due to required specialized infrastructure as well as advanced technologies and multiple safety systems.
  • The infrastructure is fixed hence the services provided are limited and can not be changed in response to changing market conditions. However, for passengers this can present an advantage as services are less likely to be withdrawn from railways compared to flight routes.
  • As the infrastructure can be extremely expensive, it is not possible to create a direct route between every major city. This means that a train might be transiting or stopping in intermediate stations, increasing the length and duration of a journey.
  • Railways require the security and cooperation of all geographies and governments involved.
  • As all HSRs are electrified they require an extended electricity grid to supply the Overhead lines

Pollution

High-speed rail usually implements electric power and therefore its energy sources can be distant or renewable. The usage of electric power in high-speed rails can thereby result in a reduction of air pollutants as shown in a case study on China's high-speed railways throughout its development. This is an advantage over air travel, which currently uses fossil fuels and is a major source of pollution. Studies regarding busy airports such as LAX, have shown that over an area of about 60 square kilometres (23 square miles) downwind of the airport, where hundreds of thousands of people live or work, the particle number concentration was at least twice that of nearby urban areas, showing that airplane pollution far exceeded road pollution, even from heavy freeway traffic.

Trees

Airplanes and airstrips require trees to be cut down, as they are a nuisance to pilots. Some 3,000 trees will be chopped due to obstruction issues at Seattle–Tacoma International Airport. On the other hand, trees next to rail lines can often become a hazard during leaf-fall seasons, with several German media calling for trees to be cut down following autumn storms in 2017.

Safety

HSR is much simpler to control due to its predictable course. High-speed rail systems reduce (but do not eliminate) collisions with automobiles or people, by using non-grade level track and eliminating grade-level crossings. To date, the only three deadly accidents involving a high-speed train on high-speed tracks in revenue service were the 1998 Eschede train disaster, the 2011 Wenzhou train collision (in which speed was not a factor), and the 2020 Livraga derailment. Shinkansen trains have anti-derailment devices installed under passenger cars, which do not strictly prevent derailment, but prevent the train from travelling a large distance away from train tracks in case a derailment occurs.

Accidents

See also: List of TGV accidents

In general, travel by high-speed rail has been demonstrated to be remarkably safe. The first high-speed rail network, the Japanese Shinkansen has not had any fatal accidents involving passengers since it began operating in 1964.

Notable major accidents involving high-speed trains include the following.

1998 Eschede accident

Main article: Eschede train disaster

In 1998, after over thirty years of high-speed rail operations worldwide without fatal accidents, the Eschede accident occurred in Germany: a poorly designed ICE 1 wheel fractured at a speed of 200 km/h (124 mph) near Eschede, resulting in the derailment and destruction of almost the entire set of 16 cars, and the deaths of 101 people. The derailment began at a switch; the accident was made worse when the derailed cars travelling at high speed struck and collapsed a road bridge located just past the switch.

2011 Wenzhou accident

Main article: Wenzhou train collision

On 23 July 2011, 13 years after the Eschede train accident, a Chinese CRH2 travelling at 100 km/h (62 mph) collided with a CRH1 which was stopped on a viaduct in the suburbs of Wenzhou, Zhejiang province, China. The two trains derailed, and four cars fell off the viaduct. Forty people were killed and at least 192 were injured, 12 of them severely.

The disaster led to a number of changes in management and exploitation of high-speed rail in China. Despite the fact that speed itself was not a factor in the cause of the accident, one of the major changes was to further lower the maximum speeds in high-speed and higher-speed railways in China, the remaining 350 km/h (217 mph) becoming 300 km/h (185 mph), 250 km/h (155 mph) becoming 200, and 200 km/h (124 mph) becoming 160. Six years later they started to be restored to their original high speeds.

2013 Santiago de Compostela accident

Main article: Santiago de Compostela derailment

In July 2013, a high-speed train in Spain travelling at 190 km/h (120 mph) attempted to negotiate a curve whose speed limit is 80 km/h (50 mph). The train derailed and overturned, resulting in 78 fatalities. Normally high-speed rail has automatic speed limiting restrictions, but this track section is a conventional section and in this case the automatic speed limit was said to be disabled by the driver several kilometers before the station. A few days later, the train worker's union claimed that the speed limiter didn't work properly because of lack of proper funding, acknowledging the budget cuts made by the current government. Two days after the accident, the driver was provisionally charged with homicide by negligence. This is the first accident that occurred with a Spanish high-speed train, but it occurred in a section that was not high speed and as mentioned safety equipment mandatory on high-speed track would have prevented the accident.

2015 Eckwersheim accident

Main article: Eckwersheim derailment

On 14 November 2015, a specialised TGV EuroDuplex was performing commissioning tests on the unopened second phase of the LGV Est high-speed line in France, when it entered a curve, overturned, and struck the parapet of a bridge over the Marne–Rhine Canal. The rear power car came to a rest in the canal, while the remainder of the train came to a rest in the grassy median between the northern and southern tracks. Approximately 50 people were on board, consisting of SNCF technicians and, reportedly, some unauthorised guests. Eleven were killed and 37 were injured. The train was performing tests at 10 percent above the planned speed limit for the line and should have slowed from 352 km/h (219 mph) to 176 km/h (109 mph) before entering the curve. Officials have indicated that excessive speed may have caused the accident. During testing, some safety features that usually prevent accidents like this one are switched off.

2018 Ankara train collision

Main article: Marşandiz train collision

On 13 December 2018, a high-speed passenger train travelling at 80–90 kilometres per hour (50–56 mph) and a locomotive collided near Yenimahalle in Ankara Province, Turkey. Three cars (carriages/coaches) of the passenger train derailed in the collision. Three railroad engineers and five passengers were killed at the scene, and 84 people were injured. Another injured passenger later died, and 34 passengers, including two in critical condition, were treated in several hospitals.

2020 Lodi derailment

Main article: Livraga derailment

On 6 February 2020, a high-speed train travelling at 300 km/h (185 mph) derailed at Livraga, Lombardy, Italy. The two drivers were killed and a number of passengers were injured. The cause as reported by investigators was that a faulty set of junction points was in the reverse position, but was reported by the signaling system as being in the normal – i.e. straight – position.

Ridership

High-speed rail ridership has been increasing rapidly since 2000. At the beginning of the century, the largest share of ridership was on the Japanese Shinkansen network. In 2000, the Shinkansen was responsible for about 85% of the cumulative world ridership up to that point. This has been progressively surpassed by the Chinese high-speed rail network, which has been the largest contributor of global ridership growth since its inception. As of 2018, annual ridership of the Chinese high-speed rail network is over five times larger than that of the Shinkansen.

Comparison of high-speed rail and airlines, by year: annual passengers worldwide (in millions). Only systems with 200 km/h (124 mph) service speeds or higher are considered.
Year Annual world HSR Annual world airlines
2000 435 1,674
2005 559 1,970
2010 895 2,628
2012 1,185 2,894
2014 1,470 3,218
2016 ~2,070 (prelim) 3,650
2017 x 4,030
2018 x 4,290
2019 3,291.1 4,460
2020 x 1,770
2021 x 2,280
High-speed rail ridership in the world. Data is from UIC Statistics unless otherwise specified. Only countries with more than 5 million passengers a year are included.
Country/territory Ridership (millions) Passenger-km (billions) Year
China China 2357.7 774.7 2019
Japan Japan 354.6 99.3 2019
Russia Russia 156.7 6.2 2019
France France 125.9 60.0 2019
Germany Germany 99.2 33.2 2019
Taiwan Taiwan 67.4 12.0 2019
South Korea South Korea 66.1 16.0 2019
Italy Italy 59.7 21.1 2019
Spain Spain 41.2 16.1 2019
United States United States 12.7 3.4 2019
Sweden Sweden 11.6 3.9 2019
Turkey Turkey 8.3 2.7 2019

Records

Speed

Main article: Railway speed record
L0 Series Shinkansen, unconventional world speed record holder (603 km/h or 374.7 mph)
V150 train, modified TGV, conventional world speed record holder (574.8 km/h or 357.2 mph)

There are several definitions of "maximum speed":

  • The maximum speed at which a train is allowed to run by law or policy in daily service (MOR)
  • The maximum speed at which an unmodified train is proved to be capable of running
  • The maximum speed at which specially modified train is proved to be capable of running

Absolute speed record

Overall rail record

The speed record for a pre-production unconventional passenger train was set by a seven-car L0 series manned maglev train at 603 km/h (375 mph) on 21 April 2015 in Yamanashi Prefecture, Japan.

Conventional rail

Since the 1955 record, where France recorded a world record of speed of 331 km/h, France has nearly continuously held the absolute world speed record. The latest record is held by a TGV POS trainset, which reached 574.8 km/h (357.2 mph) in 2007, on the newly constructed LGV Est high-speed line. This run was for proof of concept and engineering, not to test normal passenger service.

Maximum speed in service

Main article: List of fastest trains

As of 2022, the fastest trains currently in commercial operation are :

  1. Shanghai Maglev : 431 km/h (268 mph) (in China, on the lone 30 km (19 mi) maglev track)
  2. CR400AF/KCIC400AF, CR400BF, CRH2C, CRH3C, CRH380A & AL, CRH380B, BL & CL, CRH380D : 350 km/h (220 mph) (in China and Indonesia)
  3. TGV Duplex, TGV Réseau, TGV POS, TGV Euroduplex : 320 km/h (200 mph) (in France)
  4. Eurostar e320 : 320 km/h (200 mph) (in France and GB)
  5. E5 Series Shinkansen, E6 Series Shinkansen, H5 Series Shinkansen: 320 km/h (200 mph) (in Japan)
  6. ICE 3 Class 403, 406, 407 : 320 km/h (200 mph) (in Germany)
  7. AVE Class 103 : 310 km/h (190 mph) (in Spain)
  8. KTX-I, KTX-II, KTX-III : 305 km/h (190 mph) (in South Korea)
  9. AGV 575, ETR 1000 (Frecciarossa 1000): 300 km/h (185 mph) (in Italy)
  10. ETR 500: 300 km/h (185 mph) (in Italy)

Many of these trains and their networks are technically capable of higher speeds but they are capped out of economic and commercial considerations (cost of electricity, increased maintenance, resulting ticket price, etc.)

Levitation trains

The Shanghai Maglev Train reaches 431 km/h (268 mph) during its daily service on its 30.5 km (19.0 mi) dedicated line, holding the speed record for commercial train service.

Conventional rail

The fastest operating conventional trains are the Chinese CR400A and CR400B running on Beijing–Shanghai HSR, after China relaunched its 350 km/h class service on select services effective 21 September 2017. In China, from July 2011 until September 2017, the maximum speed was officially 300 km/h (185 mph), but a 10 km/h (6 mph) tolerance was acceptable, and trains often reached 310 km/h (193 mph). Before that, from August 2008 to July 2011, China Railway High-speed trains held the highest commercial operating speed record with 350 km/h (217 mph) on some lines such as the Wuhan–Guangzhou high-speed railway. The speed of the service was reduced in 2011 due to high costs and safety concerns the top speeds in China were reduced to 300 km/h (185 mph) on 1 July 2011. Six years later they started to be restored to their original high speeds.

Other fast conventional trains are the French TGV POS, German ICE 3, and Japanese E5 and E6 Series Shinkansen with a maximum commercial speed of 320 km/h (199 mph), the former two on some French high-speed lines, and the latter on a part of Tohoku Shinkansen line.

In Spain, on the Madrid–Barcelona HSL, maximum speed is 310 km/h (193 mph).

Service distance

Main article: Longest train services

The China Railway G403/4, G405/6 and D939/40 Beijing–Kunming train (2,653 kilometres or 1,648 miles, 10 hours 43 minutes to 14 hours 54 minutes), which began service on 28 December 2016, are the longest high-speed rail services in the world.

Existing systems by country and region

Main article: List of high-speed railway lines See also: Proposed high-speed rail by country
China Railway High-speed train passing through Shenzhou railway station in Hainan

The early high-speed lines, built in France, Japan, Italy and Spain, were between pairs of large cities. In France, this was Paris–Lyon, in Japan, Tokyo–Osaka, in Italy, RomeFlorence, in Spain, MadridSeville (then Barcelona). In European and East Asian countries, dense networks of urban subways and railways provide connections with high-speed rail lines.

Asia

China

Main article: High-speed rail in China

China has the largest network of high-speed railways in the world. As of 2022 it encompassed over 40,000 kilometres (25,000 miles) of high-speed rail or over two-thirds of the world's total. It is also the world's busiest with an annual ridership of over 1.44 billion in 2016 and 2.01 billion in 2018, more than 60% of total passenger rail volume. By the end of 2018, cumulative passengers delivered by high-speed railway trains was reported to be over 9 billion. According to Railway Gazette International, select trains between Beijing South to Nanjing South on the Beijing–Shanghai high-speed railway have the fastest average operating speed in the world at 317.7 km/h (197.4 mph) as of July 2019.

Chinese CRH380A high-speed train

The improved mobility and interconnectivity created by these new high-speed rail lines has generated a whole new high-speed commuter market around some urban areas. Commutes via high-speed rail to and from surrounding Hebei and Tianjin into Beijing have become increasingly common, likewise are between the cities surrounding Shanghai, Shenzhen and Guangzhou.

Hong Kong

Main article: Hong Kong Express Rail Link

A 26 kilometres (16 miles), entirely underground express rail link connects Hong Kong West Kowloon railway station near Kwun Chung to the border with Chinese mainland, where the railway continues onwards to Shenzhen's Futian station. A depot and the stabling sidings are located in Shek Kong. Parts of the West Kowloon station are not under the jurisdiction of Hong Kong to facilitate co-location of border clearance.

Indonesia

Main article: High-speed rail in Indonesia
KCIC400AF, Indonesian variant of CR400AF

Indonesia operates a 142.8 kilometres (88.7 miles) high-speed rail line connecting its two largest cities in Western Java, the Whoosh HSR with an operational speed of 350 km/h (217 mph). Operations commenced in October 2023. It is the first high-speed rail in Southeast Asia and the Southern Hemisphere.

Japan

Main article: High-speed rail in Japan

In Japan, the Shinkansen was the first bullet train and reaches a cumulative ridership of 6 billion passengers with zero passenger fatalities due to operational accidents (as of 2003), now it is second largest high-speed rail in Asia with 2,664 kilometres (1,655 miles) of rail lines.

Saudi Arabia

Plans in Saudi Arabia to begin service on a high-speed line consist of a phased opening starting with the route from Medina to King Abdullah Economic City followed up with the rest of the line to Mecca the following year. The 453-kilometre-long (281 mi) Haramain high-speed railway opened in 2018.

South Korea

Main article: High-speed rail in South Korea

Since its opening in 2004, KTX has transferred over 360 million passengers until April 2013, and now Asia's third largest with 887 kilometres (551 miles) of rail lines. For any transportation involving travel above 300 km/h (185 mph), the KTX secured a market share of 57% over other modes of transport, which is by far the largest.

Taiwan

Main article: High-speed rail in Taiwan

Taiwan has a single north–south high-speed line, Taiwan high-speed rail. It is approximately 345 kilometres (214 miles) long, along the west coast of Taiwan from the national capital Taipei to the southern city of Kaohsiung. The construction was managed by Taiwan high-speed rail Corporation and the total cost of the project was US$18 billion. The private company operates the line fully, and the system is based primarily on Japan's Shinkansen technology.

Eight initial stations were built during the construction of the high-speed rail system: Taipei, Banqiao, Taoyuan, Hsinchu, Taichung, Chiayi, Tainan, and Zuoying (Kaohsiung). The line now has 12 total stations (Nangang, Taipei, Banqiao, Taoyuan, Hsinchu, Miaoli, Taichung, Changhua, Yunlin, Chiayi, Tainan and Zuoying) as of August 2018. There is a planned and approved extension to Yilan and Pingtung, which are set to enter service by 2030.

Uzbekistan

Main article: Rail transport in Uzbekistan § High speed rail

Uzbekistan has a single high-speed rail line, the Tashkent–Samarkand high-speed rail line, which allows trains to reach up to 250 km/h (155.3 mph) with 600 kilometres (370 miles) of rail lines. There are also electrified extensions at lower speeds to Bukhara and Dehkanabad.

Africa

Morocco

In November 2007, the Moroccan government decided to undertake the construction of a high-speed rail line between the economic capital Casablanca and Tangier, one of the largest harbour cities on the Strait of Gibraltar. The line will also serve the capital Rabat and Kenitra. The first section of the line, the 323-kilometre (201 mi) Kenitra–Tangier high-speed rail line, was completed in 2018.

Europe

Main article: High-speed rail in Europe
Operational high-speed lines in Europe

In Europe, several nations are interconnected with cross-border high-speed rail, such as London-Paris, Paris-Brussel-Rotterdam, Madrid-Perpignan, and other future connecting projects exist.

France

Main article: High-speed rail in France

France has 2,800 kilometres (1,700 miles) of high-speed rail lines, making it one of the largest network in Europe and the world. Market segmentation has principally focused on the business travel market. The French original focus on business travellers is reflected by the early design of the TGV trains. Pleasure travel was a secondary market; now many of the French extensions connect with vacation beaches on the Atlantic and Mediterranean, as well as major amusement parks and also the ski resorts in France and Switzerland. Friday evenings are the peak time for TGVs (train à grande vitesse). The system lowered prices on long-distance travel to compete more effectively with air services, and as a result some cities within an hour of Paris by TGV have become commuter communities, increasing the market while restructuring land use.

On the Paris–Lyon service, the number of passengers grew sufficiently to justify the introduction of double-decker coaches. Later high-speed rail lines, such as the LGV Atlantique, the LGV Est, and most high-speed lines in France, were designed as feeder routes branching into conventional rail lines, serving a larger number of medium-sized cities.

Germany

Main article: High-speed rail in Germany

Germany's first high-speed lines ran north–south, for historical reasons, and later developed east–west after German unification. In the early 1900s, Germany became the first country to run a prototype electric train at speeds in excess of 200 km/h, and during the 1930s several steam and diesel trains achieved revenue speeds of 160 km/h in daily service. The InterCityExperimental briefly held the world speed record for a steel-wheel-on-steel-rails vehicle during the 1980s. The InterCityExpress entered revenue service in 1991 and serves purpose-built high-speed lines (Neubaustrecken), upgraded legacy lines (Ausbaustrecken), and unmodified legacy lines. Lufthansa, Germany's flag carrier, has entered into a codeshare agreement with Deutsche Bahn where ICEs run as "feeder flights" bookable with a Lufthansa flight number under the AIRail program.

Greece

In 2022, Greece's first high-speed train began operations between Athens and Thessaloniki. The 512 km (318 miles) route is covered in 3 to 4 hours with trains reaching speeds of up to 250 km/h (160 miles/h). The 180 km (112 mile) line from Athens to Patras is also being upgraded to high speed with an expected completion by 2026. The route between Athens and Thessaloniki was previously among the busiest passenger air routes in Europe.

Italy

Main article: High-speed rail in Italy
Two Frecciarossa 1000 at Milano Centrale

During the 1920s and 1930s, Italy was one of the first countries to develop the technology for high-speed rail. The country constructed the Direttissime railways connecting major cities on dedicated electrified high-speed track (although at speeds lower to what today would be considered high-speed rail) and developed the fast ETR 200 trainset. After the Second World War and the fall of the fascist regime, interest in high-speed rail dwindled, with the successive governments considering it too costly and developing the tilting Pendolino, to run at medium-high speed (up to 250 km/h (160 mph)) on conventional lines, instead.

A true dedicated high-speed rail network was developed during the 1980s and the 1990s, and 1,000 km (621 mi) of high-speed rail were fully operational by 2010. Frecciarossa services are operated with ETR 500 and ETR1000 non-tilting trains at 25kVAC, 50 Hz power. The operational speed of the service is 300 km/h (185 mph).

Over 100 million passengers used the Frecciarossa from the service introduction up to the first months of 2012. The high-speed rail system serves about 20 billion passenger-km per year as of 2016. Italian high-speed services are profitable without government funding.

Nuovo Trasporto Viaggiatori, the world's first private open-access operator of high-speed rail, is operative in Italy since 2012.

Norway

Main article: High-speed rail in Norway

As of 2015, Norway's fastest trains have a commercial top speed of 210 kilometres per hour (130 miles per hour) and the FLIRT trains may attain 200 kilometres per hour (120 miles per hour). A velocity of 210 kilometres per hour (130 miles per hour) is permitted on the 42 kilometres (26 miles) Gardermoen Line, which links the Gardermoen airport to Oslo and a part of the main line northwards to Trondheim.

Some parts of the trunk railways around Oslo are renewed and built for 250 kilometres per hour (160 miles per hour):

  • The Follo Line southwards from Oslo, a 22-kilometre-long (14-mile) line Oslo–Ski on the Østfold Line, mainly in tunnel, planned to be ready in 2021.
  • The Holm–Holmestrand–Nykirke part of the Vestfold Line (west to southwest of Oslo).
  • The Farriseidet project, 14.3 kilometres (8.9 miles) between Larvik and Porsgrunn on the Vestfold Line, 12.5 kilometres (7.8 miles) in tunnel.

Russia

Main article: High-speed rail in Russia

The existing Saint Petersburg–Moscow Railway can operate at maximum speeds of 250 km/h; the HelsinkiSaint Petersburg railway, dismantled after the 2022 Russian invasion of Ukraine, was capable of a maximum of 200 km/h. A new Moscow–Saint Petersburg high-speed railway, designed specifically for high-speed rail, is currently under construction: once completed, it is expected to have the maximum speed of 400 km/h. Future areas include freight lines, such as the Trans-Siberian Railway in Russia, which would allow 3-day Far East to Europe service for freight, potentially fitting in between the months by ship and hours by air.

Serbia

A high-speed line of SOKO (Serbian: soko, meaning "falcon") trains connects the country's two most populous cities: Belgrade, the capital of the country, and Novi Sad, the capital of Vojvodina. In contrast to the slower Stadler FLIRT trains used for the Regio lines, the Stadler KISS-es take 36 minutes to go across two cities. In addition to the two main stations, the trains only stop in New Belgrade. The line is currently being extended to reach Subotica, Serbia's northernmost city. The work is expected to be finished until the end of 2024, with an anticipated travel time between Belgrade and Subotica being around 70 minutes.

Spain

Main article: High-speed rail in Spain
Spanish high-speed services

Spain has built an extensive high-speed rail network, with a length of 3,622 km (2,251 mi) (2021), the longest in Europe. It uses standard gauge as opposed to the Iberian gauge used in most of the national railway network, meaning that the high-speed tracks are separated and not shared with local trains or freight. Although standard gauge is the norm for Spanish high-speed rail, since 2011 there exists a regional high-speed service running on Iberian gauge with special trains that connects the cities of Ourense, Santiago de Compostela, A Coruña, and Vigo in northwestern Spain. Connections to the French network exist since 2013, with direct trains from Paris to Barcelona. Although on the French side, conventional speed tracks are used from Perpignan to Montpellier.

Switzerland

Main article: High-speed rail in Switzerland

High-speed north–south freight lines in Switzerland are under construction, avoiding slow mountainous truck traffic, and lowering labour costs. The new lines, in particular the Gotthard Base Tunnel, are built for 250 km/h (155 mph). But the short high-speed parts and the mix with freight will lower the average speeds. The limited size of the country gives fairly short domestic travel times anyway. Switzerland is investing money in lines on French and German soil to enable better access to the high-speed rail networks of those countries from Switzerland.

Turkey

Main article: High-speed rail in Turkey

The Turkish State Railways started building high-speed rail lines in 2003. The first section of the line, between Ankara and Eskişehir, was inaugurated on 13 March 2009. It is a part of the 533 km (331 mi) Istanbul to Ankara high-speed rail line. A subsidiary of Turkish State Railways, Yüksek Hızlı Tren is the sole commercial operator of high-speed trains in Turkey.

The construction of three separate high-speed lines from Ankara to Istanbul, Konya and Sivas, as well as taking an Ankara–İzmir line to the launch stage, form part of the Turkish Ministry of Transport's strategic aims and targets.

United Kingdom

Main article: High-speed rail in the United Kingdom

The UK's fastest high-speed line (High Speed 1) connects London St Pancras with Brussels, Paris and Amsterdam through the Channel Tunnel. At speeds of up to 300 km/h (185 mph), it is the only high-speed line in Britain with an operating speed of more than 125 mph (201 km/h).

The Great Western Main Line, South Wales Main Line, West Coast Main Line, Midland Main Line, Cross Country Route and East Coast Main Line all have maximum speed limits of 125 mph (201 km/h). Attempts to increase speeds to 140 mph (225 km/h) on both the West Coast Main Line and East Coast Main Line were abandoned in the 1980s, due to trains operating on those lines not being capable of cab signalling, which was made a legal requirement in the UK for tracks permitted to operate any service at speeds greater than 125 mph (201 km/h), due to the impracticality of observing lineside signals at such speeds.

North America

United States

Main article: High-speed rail in the United States

The United States has domestic definitions for high-speed rail varying between jurisdictions.

Amtrak's Acela Express (reaching 150 mph (240 km/h)), Northeast Regional, Keystone Service, Silver Star, Vermonter and certain MARC Penn Line express trains (the three reaching 125 mph (201 km/h)) are currently the only high-speed services on the American continent according to the American definition, although they are not considered high-speed by international standards. These services are all limited to the Northeast Corridor. The Acela Express links Boston, New York City, Philadelphia, Baltimore, and Washington, D.C., and while Northeast Regional trains travel the whole of the same route, but make more station stops. All other high-speed rail services travel over portions of the route.

As of 2024, there are two high-speed rail projects under construction in the United States. The California High-Speed Rail project, eventually linking the 5 largest cities in California, is planned to have its first operating segment, between Merced and Bakersfield, begin passenger service as soon as 2030. The Brightline West project is planned to be privately operated and link the Las Vegas Valley and Rancho Cucamonga in the Greater Los Angeles area, with service set to begin in as soon as 2028.

Inter-city effects

With high-speed rail there has been an increase in accessibility within cities. It allows for urban regeneration, accessibility in cities near and far, and efficient inter-city relationships. Better inter-city relationships lead to high-level services to companies, advanced technology, and marketing. The most important effect of HSR is the increase of accessibility due to shorter travel times. HSR lines have been used to create long-distance routes which in many cases cater to business travellers. However, there have also been short-distance routes that have revolutionised the concepts of HSR. They create commuting relationships between cities opening up more opportunities. Using both longer distance and shorter distance rail in one country allows for the best case of economic development, widening the labor and residential market of a metropolitan area and extending it to smaller cities. Therefore, HSR is highly related to urban development, it attracts offices and start-ups, induces industrial displacement, and promotes firm innovation.

Closures

The KTX Incheon International Airport to Seoul Line (operates on Incheon AREX) was closed in 2018, due to a mix of issues, including poor ridership and track sharing. The AREX was not constructed as high-speed rail, resulting a cap of 150 km/h on KTX service in its section.

In China, many conventional lines upgraded up to 200 km/h had high-speed services shifted to parallel high-speed lines. These lines, often passing through towns and having level crossings, are still used for local trains and freight trains. For example, all (passenger) EMU services on the Hankou–Danjiangkou railway were routed over the Wuhan–Shiyan high-speed railway on its opening to free up capacity for freight trains on the slower railway.

See also

References

  1. "High Speed Lines in the World" (PDF). International Union of Railways. 27 February 2020. Archived from the original (PDF) on 17 January 2021. Retrieved 18 March 2021.
  2. "Due record in prova per il Frecciarossa" (in Italian). Repubblica. 4 February 2009. Retrieved 5 February 2009.
  3. ^ "General definitions of highspeed". International Union of Railways. Archived from the original on 20 July 2011. Retrieved 13 May 2009.
  4. ^ Pyrgidis, Christos N. (21 April 2016). Railway Transportation Systems: Design, Construction and Operation. CRC Press. ISBN 978-1-4822-6216-2.
  5. Nikolaos, Demiridis; Christos, Pyrgidis (2012). "An Overview of High-Speed Railway Systems in Revenue Service Around the World at the End of 2010 and New Links Envisaged". Rail Engineering International (REI): 13–16. ISSN 0141-4615.
  6. Official Guide of the Railways, 1910: The Official Guide of the Railways and Steam Navigation Lines of the United States, Puerto Rico, Canada, Mexico, and Cuba, Rand McNally & Company Publishing, 1910,
  7. Sith Sastrasinh, "Electrical Train Marienfelde–Zossen in 1901 Archived 11 September 2016 at the Wayback Machine", 21 January 2000, WorldRailFans. Accessed 23 January 2013.
  8. Krettek 1975, p. 47.
  9. ^ Middleton 1968, p. 27.
  10. Middleton 1968, p. 68.
  11. Middleton 1968, p. 60.
  12. Middleton 1968, p. 72.
  13. "Built to Last: J.G. Brill's 'Bullets'". 5 April 2007.
  14. Middleton 1968, p. 10.
  15. "Timetable for EuroCity 378". Deutsche Bahn. Archived from the original on 7 August 2019.
  16. Dienel, Hans-Liudger; Trischler, Helmuth (1997). Geschichte und Zukunft des Verkehrs.: Verkehrskonzepte von der Frόhen ... (in German). Campus Verlag. ISBN 978-3593357669. Retrieved 26 March 2013.
  17. Eric H. Bowen. "The Pioneer Zephyr – September, 1938 – Streamliner Schedules". Archived from the original on 21 October 2014. Retrieved 17 December 2014.
  18. Eric H. Bowen. "The Twin Zephyrs – September, 1938 – Streamliner Schedules". Archived from the original on 21 October 2014. Retrieved 17 December 2014.
  19. Low Slung Train Travels Fast, p. 70, at Google Books Popular Science, February 1945, p. 70
  20. ^ Picard, Jean François; Beltran, Alain. "D'où viens tu TGV" (PDF) (in French).
  21. ^ Hood 2006, pp. 18–43.
  22. Jones, Ben (2 December 2019). "How Japan's Shinkansen bullet trains changed the world of rail travel". KIMT News. Associated Press. Archived from the original on 18 April 2021. Retrieved 18 November 2020.
  23. Kanagawa Prefecture:県央・湘南の環境と共生する都市づくりNEWS NO. 11」新幹線豆知識クイズの解説 (in Japanese). Pref.kanagawa.jp. Archived from the original on 27 September 2011. Retrieved 17 October 2011.
  24. "Shinkansen | Summary & Facts | Britannica". www.britannica.com. Retrieved 18 May 2022.
  25. "The Shinkansen Turns 50: The History and Future of Japan's High-Speed Train". nippon.com. 1 October 2014. Retrieved 25 January 2021.
  26. "Outline History and Overview of the Tokaido Shinkansen". Central Japan Railway Company. March 2010. Retrieved 2 March 2011.
  27. "Tohoku Shinkansen". East Japan Railway Company. March 2011. Retrieved 2 May 2011.
  28. "2010 Fact Sheets" (PDF). JR East. 30 July 2010. Retrieved 2 May 2011.
  29. Hood 2006, p. 214.
  30. "New maglev Shinkansen to run underground for 86% of initial route". AJW by The Asahi Shimbun. Archived from the original on 26 December 2014. Retrieved 17 December 2014.
  31. "Japan produces next generation of train technology". 25 January 2020. Retrieved 26 January 2020.
  32. ^ "German maglev test track set for revival? CRRC could use the Transrapid Emsland track to test maglev vehicles". International Railway Journal. 6 April 2021.
  33. "China's super fast 600km/h maglev train performs its first test run". SCMP. 22 June 2020. Retrieved 21 July 2021.
  34. "China reveals 620km/hr high-temp electric maglev train". The Driven. 21 January 2021. Retrieved 21 July 2021.
  35. "Le Capitole – 1969 SNCF Ferroviaire / French Trains". www.youtube.com. 19 January 2018. Archived from the original on 11 December 2021. Retrieved 2 February 2021 – via YouTube.
  36. Remarks at the Signing of the High-Speed Ground Transportation Act Archived 8 July 2018 at the Wayback Machine. 30 September 1965
  37. The Metroliner was able to travel from New York to Washington in just 2.5 hours because it did not make any intermediate stops, Metroliner Timetable, Penn Central, 26 October 1969, The Metroliners this travel time beats the Contemporary (2015) Acela on the same route, though the latter makes intermediate stops
  38. "High Speed Rail Transportation I". IEEE.
  39. ^ "Special report: A European high-speed rail network". op.europa.eu. Retrieved 22 July 2023.
  40. Baylis, Simon (11 November 2019). "Class 43 High-Speed Train, also known as the InterCity 125, is unveiled at National Railway Museum in York". Railway Museum. Retrieved 11 December 2019.
  41. "Intercity 125: Workers say farewell to British Rail icon". 16 May 2021. Retrieved 20 May 2024.
  42. "Passenger rail usage | ORR Data Portal". dataportal.orr.gov.uk. Retrieved 20 May 2024.
  43. "Frecciarossa 1000 in Figures". Ferrovie dello Stato Italiane. Archived from the original on 18 December 2014. Retrieved 24 November 2014.
  44. "Frecciarossa 1000 Very High-Speed Train". Railway Technology. Archived from the original on 9 August 2015. Retrieved 5 May 2016.
  45. "French Train Breaks Speed Record". CBC News. Archived from the original on 5 August 2020. Retrieved 5 June 2019.
  46. "Viaggia con i treni Frecciarossa e acquista il biglietti a prezzi scontati - Le Frecce - Trenitalia". trenitalia.com (in Italian). Retrieved 14 May 2017.
  47. "Ferrovie: Ecco il progetto della AV/AC Salerno-Reggio Calabria" (in Italian). 8 February 2021. Retrieved 8 February 2021.
  48. "Alta velocità ferroviaria SA-RC, come cambiano gli scenari" (in Italian). 11 January 2024. Retrieved 21 February 2024.
  49. "Alta velocità ferroviaria Salerno-Reggio e Palermo-Catania Messina: aggiudicati lavori per altri 3,7 miliardi" (in Italian). 12 May 2023. Retrieved 21 February 2024.
  50. "Alta velocità Napoli-Bari. Partiti i lavori. Sei miliardi per collegare le due città in 2 ore a 40 minuti" (in Italian). 9 August 2023. Retrieved 21 February 2024.
  51. "Treno ad alta velocità Le Frecce" (in Italian). Retrieved 24 September 2024.
  52. "Strategic Infrastructures and Transport Plan (PEIT) – Strategic Infrastructures and Transport Plan (PEIT) – Ministerio de Fomento". www.fomento.es. Archived from the original on 26 June 2010.
  53. "High speed lines in the world" (PDF).
  54. "Red de Alta Velocidad". ADIF. Retrieved 7 May 2023.
  55. "High-speed train to make 8 trips daily between Ankara, Eskișehir". TodaysZaman. Archived from the original on 21 October 2014. Retrieved 17 December 2014.
  56. "Ankara Sivas High-speed line inaugurated". railwaypro. Retrieved 5 November 2023.
  57. Pub. L. 102–533, H.R. 4250, 106 Stat. 3515, enacted October 27, 1992
  58. "Amtrak's Management of Northeast Corridor Improvements Demonstrates Need for Applying Best Practices (GAO-04-94)" (PDF). Report to the chairman, Committee on Commerce, Science, and Transportation, U.S. Senate. United States General Accounting Office. February 2004. Archived from the original (PDF) on 21 October 2014. Retrieved 26 August 2013.
  59. Dao, James (24 April 2005). "Acela, Built to Be Rail's Savior, Bedevils Amtrak at Every Turn". The New York Times. Retrieved 26 August 2013.
  60. "Construction Activities Interactive Map".
  61. 中国高铁总里程达11028公里占世界一半". Sohu Business (in Simplified Chinese). 5 March 2014.
  62. ^ "Full speed ahead for China's high-speed rail network in 2019". South China Morning Post. Retrieved 24 January 2019.
  63. 2017年中国铁路投资8010亿元 投产新线3038公里-中新网. www.chinanews.com (in Simplified Chinese). Retrieved 13 January 2018.
  64. "World's Longest Fast Train Line Opens in China". Associated Press. Archived from the original on 29 December 2012. Retrieved 26 December 2012.
  65. "Beijing – Guangzhou high speed line completed". Railway Gazette International. Archived from the original on 29 December 2012. Retrieved 31 December 2012.
  66. "China's operating high-speed railway exceeds 7,000 km". xinhuanet.com. 27 November 2012. Archived from the original on 1 December 2012. Retrieved 27 November 2012.
  67. "China Relaunches World's Fastest Train". Fortune.
  68. "China powers ahead as new entrants clock in" (PDF). Railway Gazette International. Archived from the original (PDF) on 9 July 2019. Retrieved 9 July 2019.
  69. Cho, Nam-Geon; Chung, Jin-Kyu (2008). "High Speed Rail Construction of Korea and Its Impact" (PDF). KRIHS Special Report Series (in Korean). 12. Korea Research Institute for Human Settlements: 11. Archived from the original (PDF) on 29 May 2011. Retrieved 30 August 2010.
  70. Strategic Plan for National Spatial Development (Summary) (PDF) (in Chinese). Taipei: Council for Economic Planning and Development, Government of Taiwan. June 2010. pp. 28–34. Retrieved 30 January 2022.
  71. Chen, Melody (4 September 2008). "Romance of rail jeopardises domestic air routes". Taiwan Journal. Archived from the original on 25 September 2008. Retrieved 11 October 2010.
  72. "Taiwan's High-speed Rail: It's Been a Rapid Learning Curve". China Knowledge@Wharton. Wharton School of the University of Pennsylvania. 26 September 2007. Archived from the original on 16 July 2011. Retrieved 11 October 2010.
  73. "Talgo 250 reaches Bukhara". Railway Gazette. DVV Media UK. 26 August 2016. Archived from the original on 27 August 2016. Retrieved 26 August 2016.
  74. "Egypt's Transport Ministry starts construction of 2nd express train line". Egypt Independent. 14 March 2022. Retrieved 26 December 2022.
  75. ^ Briginshaw, David. "Moroccan high-speed line to open in spring 2018". Archived from the original on 8 July 2016. Retrieved 23 September 2015.
  76. ^ "'Africa's fastest train' steams ahead in Morocco". Al Jazeera. 15 November 2018. Retrieved 17 November 2018.
  77. "F38 tec" (PDF).
  78. "Interstate Rail Proposal". J.H. Crawford. Archived from the original on 8 October 2011. Retrieved 17 October 2011.
  79. Jamil Anderlini (5 April 2010). "China on track to be world's biggest network". Financial Times. Archived from the original on 10 December 2022. Retrieved 12 April 2010.
  80. "Nantes-Laval. Le TER file à 200 km/H sur la ligne à grande vitesse [vidéo]". Ouest-France.fr. 2 July 2017.
  81. "Filderdialog Auswirkungen Mischverkehr" (PDF).
  82. "Tugraz".
  83. "2017 DA Hannes Ortlieb" (PDF).
  84. "ICE-Neubaustrecke: Nachts wird es in Kommunen mitunter leiser". www.fr.de (in German). 20 July 2023. Retrieved 17 August 2023.
  85. Beria, Paolo; Grimaldi, Raffaele; Albalate, Daniel; Bel, Germà (September 2018). "Delusions of success: Costs and demand of high-speed rail in Italy and Spain" (PDF). Transport Policy. 68: 63–79. doi:10.1016/j.tranpol.2018.03.011. hdl:11311/1122504. S2CID 157978351. Retrieved 17 November 2022.
  86. Ollivier, Gerald; Sondhi, Jitendra; Zhou, Nanyan (July 2014). "High-Speed Railways in China: A Look at Construction Costs" (PDF). Documents & Reports: The World Bank. China Transport Topics. The World Bank. Archived (PDF) from the original on 2 December 2020. Retrieved 17 November 2022.
  87. Lawrence, Martha; Bullock, Richard; Liu, Ziming (2019). "China's High-Speed Rail Development" (PDF). World Bank. Archived from the original (PDF) on 1 November 2019.
  88. "Japanese high speed rail freight services expand". Railway Gazette International. DVV Media International. 5 June 2024. Retrieved 5 June 2024.
  89. "Mercitalia Fast: from October, goods will travel at high speed". www.fsitaliane.it. Archived from the original on 17 November 2018. Retrieved 17 November 2018.
  90. Mo Yelin (29 August 2018). "China Railway Corp., SF Express Team Up on Delivery Venture". Caixin Global. Retrieved 22 September 2020.
  91. "ic:kurier: Rail courier service by train". time:matters. Retrieved 22 September 2020.
  92. Silvester, Katie (December 2011). "Interview: Alain Thauvette". Rail Professional. Cambridge: CPL. Archived from the original on 20 April 2012.
  93. Bös, Nadine (25 July 2012). "10 Jahre ICE-Strecke Köln-Frankfurt: Was 300 Stundenkilometer kosten". FAZ.NET (in German). ISSN 0174-4909. Retrieved 17 August 2023.
  94. "Deutschlands längster Eisenbahntunnel". www.fr.de (in German). 2 February 2019. Retrieved 17 August 2023.
  95. Campos, Javier (2009). "Some stylized facts about high-speed rail: A review of HSR experiences around the world". Transport Policy. 16 (1): 19–28. doi:10.1016/j.tranpol.2009.02.008.
  96. "European high-speed rail – An easy way to connect" (PDF). Luxembourg: Publications Office of the European Union. 2010. Archived from the original (PDF) on 19 April 2011. Retrieved 18 April 2011.
  97. "High-speed rail cuts into airlines' success". China Daily. 2 April 2011. Retrieved 17 October 2011.
  98. "China Southern Says Railways to Hurt 25% of Routes (Update1)". Bloomberg. 28 October 2009. Retrieved 17 October 2011.
  99. Peter Jorritsma. "Substitution Opportunities of High Speed Train for Air Transport" (PDF). p. 3. Archived from the original (PDF) on 10 March 2012.
  100. Spain's High-Speed Rail Offers Guideposts for U.S., The New York Times, 29 May 2009.
  101. Peter Jorritsma. "Substitution Opportunities of High Speed Train for Air Transport" (PDF). p. 4. Archived from the original (PDF) on 10 March 2012.
  102. "The Hokkaido Shinkansen that couldn't break the "4 hour wall"! Do customers flow to the plane with a difference of 2 minutes?" 「4時間の壁」切れなかった北海道新幹線!2分違いで飛行機に客流れる? (in Japanese). J-Cast. 18 December 2015. Retrieved 14 October 2021.
  103. Lew, Alexander (11 September 2007). "Bullet Train Challenges Airlines in Taiwan". Wired. ISSN 1059-1028. Retrieved 27 June 2020.
  104. "Taipei-Kaohsiung flights end – Taipei Times". www.taipeitimes.com. 1 September 2012. Retrieved 27 June 2020.
  105. The Times, Friday, 6 January 2006, p54. France will run trains free from fossil fuel, says Chirac.
  106. "Cut your CO2 emissions by taking the train, by up to 90%..." Seat61. Retrieved 28 August 2010.
  107. Prashant Vaze. The Economical Environmentalist. Earthscan. p. 298.
  108. Rekordmange kollektivreisende til og fra Oslo Lufthavn Archived 5 May 2016 at the Wayback Machine, in Norwegian.
  109. Schlesiger, Christian (12 January 2018). "Deutsche Bahn: Verkaufte Bahncards 100 auf Rekordwert". www.wiwo.de (in German). Retrieved 17 August 2023.
  110. "Fact #257: 3 March 2003 – Vehicle Occupancy by Type of Vehicle". US Department of Energy, Energy Efficiency and Renewable Energy.
  111. "Trains or planes? The great European travel test". www.telegraph.co.uk. 24 February 2011. Retrieved 29 June 2023.
  112. http://www.techthefuture.com/mobility/high-speed-train-vs-airplane/ Archived 4 March 2016 at the Wayback Machine from Archived 4 March 2016 at the Wayback Machine as of 10 May 2014
  113. http://www.amtrak.com/the-unique-amtrak-experience-with-many-benefits from Amtrak as of 10 May 2014
  114. Narayanan, V.G.; Batta, George (13 December 2001). Delays at Logan Airport. Harvard Business School.
  115. ^ Frittelli, John; Mallett, William J. (8 December 2009). High Speed Rail (HSR) in the United States (PDF). Congressional Research Service. OCLC 1119597335. Archived (PDF) from the original on 14 January 2023. Retrieved 14 January 2023.
  116. Examples of this include SNCF who codeshares with Air France and Lufthansa's AIRail in cooperation with DB
  117. "The Time-Consuming But Extremely Critical Process of Deicing Aircraft in the Winter". 29 December 2017.
  118. "Hainan moving flights to early mornings to beat the heat". 30 May 2017.
  119. Lockwood, Deirdre. "Los Angeles Airport Pollutes City Air For Miles Downwind – Chemical & Engineering News". cen.acs.org.
  120. "Land-acquisition concerns continue to dog high-speed rail agency".
  121. "Taiwan tackles land subsidence with water project". Taiwan Today. Ministry of Foreign Affairs, Republic of China (Taiwan). 26 July 2011. Archived from the original on 7 November 2017.
  122. Utt, Ronald. "Time to End Obama's Costly High-Speed Rail Program". The Heritage Foundation.
  123. Yang, Xuehui; Lin, Shanlang; Li, Yan; He, Minghua (1 December 2019). "Can high-speed rail reduce environmental pollution? Evidence from China". Journal of Cleaner Production. 239: 118135. Bibcode:2019JCPro.23918135Y. doi:10.1016/j.jclepro.2019.118135. ISSN 0959-6526. S2CID 202318356.
  124. Lockwood, Deirdre. "Los Angeles Airport Pollutes City Air For Miles Downwind – Chemical & Engineering News".
  125. Pittman, Mitch (12 August 2016). "Nearly 3,000 trees around Sea-Tac Airport will be chopped down".
  126. tagesschau.de. "Nach Herbststürmen – Die Bahn und der Baum". tagesschau.de.
  127. "Folgen von Sturmtief "Xavier": Bahn bestreitet mangelnden Baumbeschnitt". Spiegel Online. 6 October 2017.
  128. Djahangard, Susan (12 October 2017). "Deutsche Bahn: Die Säge nach dem Sturm". Die Zeit.
  129. "ICE train slashed open by garbage truck in Germany". Bild.de. 17 August 2010. Archived from the original on 20 August 2010. Retrieved 28 August 2010.
  130. "Fatal high-speed train kills 12 young pedestrians near beach in Barcelona". Bild.de. 17 August 2010. Archived from the original on 27 June 2010. Retrieved 28 August 2010.
  131. "Award" (PDF).
  132. "34-41" (PDF).
  133. Yonah Freemark (26 July 2013). "Opinion: Why high-speed rail is safe, smart". CNN. Retrieved 17 December 2014.
  134. "Special Feature Eschede, Germany ICE High Speed Train Disaster". Danger Ahead. Retrieved 30 December 2014.
  135. "Derailment at Eschede". Derailment at Eschede. Retrieved 30 December 2014.
  136. "Death toll from China's train crash rises to 39, including two Americans". Archived from the original on 4 December 2011. Retrieved 17 December 2014.
  137. "Decision to slow trains met with mixed response". China Daily.
  138. "More high-speed trains slow down to improve safety". China Daily.
  139. ^ "China begins to restore 350 km/h bullet train". Xinhuanet. Archived from the original on 31 January 2018.
  140. "American woman among 80 killed in Spain train crash; driver detained". NBC News. Archived from the original on 25 July 2013. Retrieved 17 December 2014.
  141. "El accidente atemoriza a las empresas que pujan por el AVE de Brasil". 02B. Archived from the original on 29 November 2014. Retrieved 17 December 2014.
  142. "Test train catastrophe on LGV Est". Railway Gazette. 16 November 2015. Archived from the original on 17 November 2015. Retrieved 16 November 2015.
  143. "Italy train crash: Two dead in high-speed derailment". BBC News. 6 February 2020. Retrieved 6 February 2020.
  144. "Treno deragliato, le cause dell'incidente: "Uno scambio aperto per errore"" [Train derailed, the causes of the accident: «A set of points opened by mistake»] (in Italian). Corriere. 7 February 2020. Retrieved 8 February 2020.
  145. ^ KTX vs 新幹線 徹底比較 (in Japanese). Archived from the original on 9 October 2019. Retrieved 6 May 2015.
  146. "新幹線旅客輸送量の推移" [Changes in Shinkansen Passenger Traffic Volume] (PDF). 国土交通省 [Ministry of Land, Infrastructure, Transport and Tourism] (in Japanese). Archived (PDF) from the original on 22 January 2013. Retrieved 17 November 2022.
  147. ^ 新幹線旅客輸送量の推移 (PDF) (in Japanese).
  148. "Taiwan HSR operator pitches restructuring idea to shareholders". Archived from the original on 8 February 2015. Retrieved 12 October 2015.
  149. "월별 일반철도 역간 이용인원". Archived from the original on 4 January 2016. Retrieved 12 October 2015.
  150. 铁路2014年投资8088亿元 超额完成全年计划--财经--人民网 (in Simplified Chinese). People's Daily Online Finance.
  151. "Air transport, passengers carried | Data". data.worldbank.org.
  152. IATA. "IATA – New IATA Passenger Forecast Reveals Fast-Growing Markets of the Future". Archived from the original on 17 May 2015. Retrieved 6 May 2015.
  153. "RAILISA STAT UIC". uic-stats.uic.org. Retrieved 13 March 2022.
  154. ^ railways, UIC-International union of (13 March 2022). "High-Speed Databases and Atlas". UIC – International union of railways. Retrieved 13 March 2022.
  155. "Japan's maglev train breaks world speed record with 600 kilometres per hour (370 miles per hour) test run". The Guardian. United Kingdom. 21 April 2015. Retrieved 21 April 2015.
  156. "Top ten fastest trains in the world" railway-technology.com 29 August 2013
  157. "World's longest high-speed train to decelerate a bit". People's Daily Online. 15 April 2011.
  158. "320-km/h Hayabusa matches world speed record". The Japan Times. Japan: The Japan Times Ltd. 17 March 2013. Archived from the original on 19 March 2013. Retrieved 11 September 2013.
  159. "Length of Beijing-HK rail network same as Equator". The Star. January 2022. Retrieved 25 October 2022.
  160. ^ "中国高铁动车组发送旅客90亿人次:2018年占比超60%_凤凰网" [China's high-speed rail trains send 9 billion passengers: more than 60% in 2018]. tech.ifeng.com. Phoenix New Media. 1 January 2019. Retrieved 27 February 2021.
  161. "China powers ahead as new entrants clock in" (PDF). Railway Gazette International. Archived from the original (PDF) on 9 July 2019. Retrieved 9 July 2019.
  162. "Shanghai, Shenzhen, Beijing Lead Prospects in ULI's China Cities Survey – Urban Land Magazine". Urban Land Magazine. 3 October 2016. Retrieved 13 March 2017.
  163. Ollivier, Gerald. "High-Speed Railways in China: A Look at Traffic" (PDF).
  164. "Intercity commuters are a puzzle for Chinese officials". The Economist. 27 February 2021. ISSN 0013-0613. Retrieved 27 February 2021.
  165. T, Sharon. "Indonesia electrifies railway from Jakarta to Bandung". AFM. Retrieved 26 August 2020.
  166. "Melesat di Kecepatan 320 Km per Jam, Kereta Cepat Minim Guncangan". mediaindonesia.com (in Indonesian). 25 June 2023. Retrieved 29 June 2023.
  167. Japanese Bullet Trains, Japan Railways Group. Archived 18 December 2009 at the Wayback Machine
  168. AMTRAK, Off Track, Triplepoint. Boston University.
  169. "Japan" (PDF).
  170. "Bridge near KAIA to be removed in 2 months". 31 July 2014. Retrieved 17 December 2014.
  171. KTX 개통 9년…이용객 4억명 돌파 눈앞 (in Korean). Hankyung.com. 1 April 2013. Retrieved 12 July 2013.
  172. "Taiwan" (PDF).
  173. "Taiwan High Speed Rail Corporation". Archived from the original on 27 December 2014. Retrieved 17 December 2014.
  174. Yeniseyev, Maksim. "Uzbekistan electrifies railway towards Afghan border". Caravanserai. Retrieved 26 August 2020.
  175. Metzler, 1992
  176. Levinson, D.
  177. "First high-speed trains to run in Greece". Alstom. Retrieved 13 June 2023.
  178. "Alta Velocità: tagliato il traguardo dei 100 milioni di viaggiatori" (in Italian). ilsussidiario.net. 10 May 2012. Archived from the original on 13 May 2012. Retrieved 25 June 2012.
  179. "Il mercato del Trasporto Ferroviario A/V – NTV, Nuovo Trasporto Viaggiatori". www.ntvspa.it (in Italian). Retrieved 13 October 2017.
  180. "Trenitalia: Dal 2013 a rischio il trasporto locale" (in Italian). SkyTG24. Archived from the original on 4 April 2013. Retrieved 25 June 2012.
  181. "Alta velocità e concorrenza: parte la sfida". il Sole 24 Ore. Retrieved 28 April 2012.
  182. Stevanović, Nemanja (18 May 2022). "Srbija i železnica: Leti "Soko" pun putnika, sa četiri godine zakašnjenja". bbc.com. Retrieved 23 May 2024.
  183. "Pojačani polasci "sokola" tokom vikenda". kanal9tv.com. 25 March 2022. Retrieved 23 May 2024.
  184. "We Took a Ride on "Soko" to Novi Sad – What Did We Like, and What Did We Not Like? (PHOTO, VIDEO)". ekapija.com. 23 March 2022. Retrieved 23 May 2024.
  185. Martać, Isidora (23 October 2022). "Vodič za građane koji redovno putuju vozom Soko na relaciji Novi Sad – Beograd: Cene karata, popusti i pogodnosti". danas.rs. Retrieved 23 May 2024.
  186. "OVO JE NOVI RED VOŽNJE NA BRZOJ PRUZI! "Sokolom" 64 puta dnevno iz Beograda i Novog Sada - PROMOTIVNA CENA DO KRAJA MAJA!". informer.rs. 3 May 2022. Retrieved 23 May 2024.
  187. "Vučić: Za godinu dana, od Beograda do Subotice vozom za 75 minuta". mojnovisad.com. 21 December 2023. Retrieved 23 May 2024.
  188. Blažević, Aleksandra (29 August 2023). "Najseverniji grad Srbije poznat je po bogatom nasleđu i atrakcijama u okolini". ona.telegraf.rs. Retrieved 23 May 2024.
  189. "Brzim vozom do Subotice do kraja godine". vreme.com. 26 March 2024. Retrieved 23 May 2024.
  190. Strategic Aims and Targetswww.bmc.net
  191. MIRSE, David Bickell (15 November 2018). "The digital railway - progresses to the East Coast Main Line". Rail Engineer. Retrieved 20 May 2024.
  192. "US Code Title 49 § 26105 –Definitions". US Code Title 49. 1 February 2010. Archived from the original on 17 March 2012. Retrieved 27 May 2011. reasonably expected to reach sustained speeds of more than 125 mph
  193. "High-Speed Rail Strategic Plan". U.S. Department of Transportation. 1 April 2009. Archived from the original on 7 January 2013. Retrieved 28 June 2013.
  194. "Development of High Speed Rail in the United States: Issues and Recent Events" (PDF). Congressional Research Service. Retrieved 10 October 2012.
  195. "2023 Project Update Report" (PDF). California High-Speed Rail Authority. Retrieved 12 March 2024.
  196. "Construction to begin on high-speed rail between Vegas and California". Washington Post. 20 April 2024. ISSN 0190-8286. Retrieved 20 April 2024.
  197. Garmendia, Maddi; Ribalaygua, Cecilia; Ureña, José María (1 December 2012). "High speed rail: implication for cities". Cities. Current Research on Cities. 29: S26–S31. doi:10.1016/j.cities.2012.06.005. ISSN 0264-2751.
  198. Xiao, Fan; Wang, Jiaoe; Du, Delin (18 January 2022). "High-speed rail heading for innovation: the impact of HSR on intercity technology transfer". Area Development and Policy. 7 (3): 293–311. doi:10.1080/23792949.2021.1999169. S2CID 246049230.
  199. Xiao, Fan; Zhou, Yong; Deng, Weipeng; Gu, Hengyu (April 2020). "Did high-speed rail affect the entry of automobile industry start-ups? Empirical evidence from Guangdong Province, China". Travel Behaviour and Society. 19: 45–53. Bibcode:2020TBSoc..19...45X. doi:10.1016/j.tbs.2019.12.002. S2CID 213535387.
  200. Xiao, Fan; Lin, Jen-Jia (June 2021). "High-speed rail and high-tech industry evolution: Empirical evidence from China". Transportation Research Interdisciplinary Perspectives. 10: 100358. Bibcode:2021TrRIP..1000358X. doi:10.1016/j.trip.2021.100358. S2CID 234821409.
  201. Dong, Xiaofang; Zheng, Siqi; Kahn, Matthew E. (January 2020). "The role of transportation speed in facilitating high skilled teamwork across cities". Journal of Urban Economics. 115: 103212. doi:10.1016/j.jue.2019.103212. hdl:1721.1/132188. S2CID 211379852.
  202. "South Korea closes $266m high-speed rail line as passengers prefer the bus". Globalconstructionreview.com. 16 August 2018.
  203. "今天,湖北多县市,告别无高铁历史!" [Officially opened to traffic! Today, many counties and cities in Hubei bid farewell to the absence of high-speed rail!]. 29 November 2019. It is reported that in order to unleash the freight capacity of the Handan Railway and take advantage of the high-speed rail transportation, all the EMU trains running on the Handan Railway will be transferred to the Han-Dan Railway.

Works cited

Further reading

External links

Public transport
Bus service
Rail
Vehicles
for hire
Carpooling
Ship
Cable
Other
transport
Locations
Ticketing
and fares
Routing
Facilities
Scheduling
Politics
Technology
and signage
Other topics
icon Transport portal
High-speed rail
Part of rail transport
Technologies
High-speed trains
350 km/h
(217 mph)
or more
300–349 km/h
(186–217 mph)
250–299 km/h
(155–186 mph)
200–249 km/h
(124–155 mph)
Experimental and prototype high-speed trains (category)
High-speed railway line
By countries and territories

planned networks in italics
Africa
Americas
Asia
Europe
Oceania
High-speed railway lines
Africa
Morocco
Asia
China
Indonesia
Japan
Saudi Arabia
South Korea
Taiwan
Turkey
Uzbekistan
Europe
Belgium
Denmark
Finland
France
Germany
Greece
Italy
Netherlands
Norway
PolandGrodzisk–Zawiercie*
Russia
Spain
SwedenBothnia Line
United Kingdom
North America
United StatesNortheast Corridor*
OceaniaNone
South AmericaNone
* An asterisk indicates overlap with conventional services.
Portals: Categories: