 | This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed. Find sources: "HomePNA" – news · newspapers · books · scholar · JSTOR (August 2023) (Learn how and when to remove this message) |
| Home networking standards |
|---|
| IEEE standardized |
| ITU-T recommendation |
The HomePNA Alliance (formerly the Home Phoneline Networking Alliance, also known as HPNA) is an incorporated non-profit industry association of companies that develops and standardizes technology for home networking over the existing coaxial cables and telephone wiring within homes, so new wires do not need to be installed. HomePNA creates industry specifications which it then standardizes under the International Telecommunication Union (ITU) standards body.
HomePNA was developed for entertainment applications such as IPTV which require good quality of service (QoS). HomePNA promoter companies are AT&T Inc., Technicolor SA, Pace plc, Sigma Designs, Motorola, Cisco Systems, Sunrise Telecom and K-Micro.
History
HomePNA 1.0 technology was developed by Tut Systems in the 1990s. The original protocols used balanced pair telephone wire.
HomePNA 2.0 was developed by Epigram and was approved by the ITU as Recommendations G.9951, G.9952 and G.9953.
HomePNA 3.0 was developed by Broadcom (which had purchased Epigram) and Coppergate Communications and was approved by the ITU as Recommendation G.9954 in February 2005.
HomePNA 3.1 was developed by Coppergate Communications and was approved by the ITU as Recommendation G.9954 in January 2007. HomePNA 3.1 added Ethernet over coax. HomePNA 3.1 uses frequencies above those used for digital subscriber line and analog voice calls over phone wires and below those used for broadcast and direct-broadcast satellite TV over coax, so it can coexist with those services on the same wires.
In March 2009, HomePNA announced a liaison agreement with the HomeGrid Forum to promote the ITU-T G.hn wired home networking standard. In May 2013 the HomePNA alliance merged with the HomeGrid Forum.
Technical characteristics
HomePNA uses frequency-division multiplexing (FDM), which uses different frequencies for voice and data on the same wires without interfering with each other. A standard phone line has enough room to support voice, high-speed DSL and a landline phone.
Two custom chips designed using the HPNA specifications were developed by Broadcom: the 4100 chip can send and receive signals over 1,000 ft (305 m) on a typical phone line. The larger 4210 controller chip strips away noise and passes data on.
A HomePNA setup would include a HomePNA card or external adapter for each computer, an external adapter, cables, and software. A low-pass filter may be needed between any phones and their respective jacks to block noise. HomePNA adapters come in PCI, USB, and PC Card formats.
Alternatives
Alternatives to HomePNA include power line communication, Wi-Fi, data over cable, and multimedia over coax.
See also
- IEEE 802.3 – Collection of standards for wired Ethernet
- IEEE 802.11 – Wireless network standard
- IEEE 1905 – Multi-mode network enabler for home networking
References
- "Members". Retrieved August 1, 2011.
- Specifications download request, HomePNA, archived from the original on 2008-05-18, retrieved 2008-04-30
- HomePNA and HomeGrid Sign Liaison Agreement Archived 2011-10-01 at the Wayback Machine, Groups Work to Promote New ITU G.hn Global Wired Home Networking Standard
- "HomeGrid Forum & HomePNA Alliance Merge" (PDF). Press release. May 28, 2013. Archived from the original (PDF) on March 24, 2017. Retrieved November 30, 2013.
- ^ "How Phone-line Networking Works". HowStuffWorks. 30 April 2001. Retrieved 2016-02-20.
- "Alternative Networking - Phoneline". www.practicallynetworked.com. Retrieved 2016-02-20.
External links
- ITU-T Recommendation G.9951 : Phoneline networking transceivers - Foundation (HomePNA 2.0)
- ITU-T Recommendation G.9952 : Phoneline networking transceivers - Payload format and link layer requirements (HomePNA 2.0)
- ITU-T Recommendation G.9953 : Phoneline networking transceivers - Isolation function (HomePNA 2.0)
- ITU-T Recommendation G.9954 : Phoneline networking transceivers - Enhanced physical, media access, and link layer specifications (HomePNA 3.0 and 3.1)
- ITU-T Recommendations: Series G
| Home automation | ||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| System |
|  | ||||||||||||||||||
| Tasks | ||||||||||||||||||||
| Other | ||||||||||||||||||||